diff mbox

thermal: rcar: enable to set tripN-temp via DT

Message ID 87io4q97s7.wl%kuninori.morimoto.gx@renesas.com (mailing list archive)
State Not Applicable
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Kuninori Morimoto Nov. 25, 2015, 1:45 a.m. UTC
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current rcar thermal driver is using 90 degrees as trip temp, but it
should be based on each SoC / platform.
This patch enables to set trip temp via DT. (It uses db8500-thermal
style for it)
It will use 90 degrees as default trip temp if DT doesn't have it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 .../devicetree/bindings/thermal/rcar-thermal.txt   |  2 ++
 drivers/thermal/rcar_thermal.c                     | 34 ++++++++++++++++++++--
 2 files changed, 33 insertions(+), 3 deletions(-)

Comments

Eduardo Valentin Nov. 25, 2015, 3:43 a.m. UTC | #1
Morimoto-san,


On Wed, Nov 25, 2015 at 01:45:14AM +0000, Kuninori Morimoto wrote:
> 
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> 
> Current rcar thermal driver is using 90 degrees as trip temp, but it
> should be based on each SoC / platform.
> This patch enables to set trip temp via DT. (It uses db8500-thermal
> style for it)
> It will use 90 degrees as default trip temp if DT doesn't have it.
> 
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
>  .../devicetree/bindings/thermal/rcar-thermal.txt   |  2 ++
>  drivers/thermal/rcar_thermal.c                     | 34 ++++++++++++++++++++--
>  2 files changed, 33 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> index 332e625..6c57f7e 100644
> --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> @@ -18,6 +18,8 @@ Required properties:
>  Option properties:
>  
>  - interrupts		: use interrupt
> +- tripN-temp		: temperature of trip point N. it will use 90000 as default
> +			  if DT doesn't have tripN-temp

First of all, you are creating an entry with is specific to your driver.
That requires it to use proper prefixing.

Besides, your property is already covered by of-thermal. Please convert
your driver to use of-thermal, this way it will give you the flexibility
to configure thermal data in DT.

BR,
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kuninori Morimoto Nov. 25, 2015, 5:23 a.m. UTC | #2
Hi Eduardo

Thank you for your feedback

> > From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> > 
> > Current rcar thermal driver is using 90 degrees as trip temp, but it
> > should be based on each SoC / platform.
> > This patch enables to set trip temp via DT. (It uses db8500-thermal
> > style for it)
> > It will use 90 degrees as default trip temp if DT doesn't have it.
> > 
> > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> > ---
> >  .../devicetree/bindings/thermal/rcar-thermal.txt   |  2 ++
> >  drivers/thermal/rcar_thermal.c                     | 34 ++++++++++++++++++++--
> >  2 files changed, 33 insertions(+), 3 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> > index 332e625..6c57f7e 100644
> > --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> > +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> > @@ -18,6 +18,8 @@ Required properties:
> >  Option properties:
> >  
> >  - interrupts		: use interrupt
> > +- tripN-temp		: temperature of trip point N. it will use 90000 as default
> > +			  if DT doesn't have tripN-temp
> 
> First of all, you are creating an entry with is specific to your driver.
> That requires it to use proper prefixing.
> 
> Besides, your property is already covered by of-thermal. Please convert
> your driver to use of-thermal, this way it will give you the flexibility
> to configure thermal data in DT.

I see, but we need to keep compatibility for non-DT SoC.
(This driver is used from both DT, non-DT SoC)

Then, I noticed we can use .set_trip_temp, and it is very enough for us.

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Geert Uytterhoeven Nov. 25, 2015, 9:57 a.m. UTC | #3
Hi Morimoto-san,

On Wed, Nov 25, 2015 at 6:23 AM, Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
>> Besides, your property is already covered by of-thermal. Please convert
>> your driver to use of-thermal, this way it will give you the flexibility
>> to configure thermal data in DT.
>
> I see, but we need to keep compatibility for non-DT SoC.
> (This driver is used from both DT, non-DT SoC)

Which SoCs with non-DT support use this driver in mainline?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kuninori Morimoto Nov. 25, 2015, 11:49 p.m. UTC | #4
Hi Geert

> <kuninori.morimoto.gx@renesas.com> wrote:
> >> Besides, your property is already covered by of-thermal. Please convert
> >> your driver to use of-thermal, this way it will give you the flexibility
> >> to configure thermal data in DT.
> >
> > I see, but we need to keep compatibility for non-DT SoC.
> > (This driver is used from both DT, non-DT SoC)
> 
> Which SoCs with non-DT support use this driver in mainline?

Oops, my bad.
I thought that this driver was used from SH too, but it didn't.

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 332e625..6c57f7e 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -18,6 +18,8 @@  Required properties:
 Option properties:
 
 - interrupts		: use interrupt
+- tripN-temp		: temperature of trip point N. it will use 90000 as default
+			  if DT doesn't have tripN-temp
 
 Example (non interrupt support):
 
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 5d4ae7d..d1d0b58 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -63,6 +63,7 @@  struct rcar_thermal_priv {
 	struct mutex lock;
 	struct list_head list;
 	int id;
+	int trip_temp;
 	u32 ctemp;
 };
 
@@ -222,7 +223,7 @@  static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
 
 	/* see rcar_thermal_get_temp() */
 	switch (trip) {
-	case 0: /* +90 <= temp */
+	case 0:
 		*type = THERMAL_TRIP_CRITICAL;
 		break;
 	default:
@@ -241,8 +242,8 @@  static int rcar_thermal_get_trip_temp(struct thermal_zone_device *zone,
 
 	/* see rcar_thermal_get_temp() */
 	switch (trip) {
-	case 0: /* +90 <= temp */
-		*temp = MCELSIUS(90);
+	case 0:
+		*temp = priv->trip_temp;
 		break;
 	default:
 		dev_err(dev, "rcar driver trip error\n");
@@ -361,6 +362,30 @@  static irqreturn_t rcar_thermal_irq(int irq, void *data)
 /*
  *		platform functions
  */
+static void rcar_thermal_of_parse(struct rcar_thermal_priv *priv)
+{
+	struct device *dev = rcar_priv_to_dev(priv);
+	struct device_node *np = dev->of_node;
+	char prop_name[32];
+	s32 val;
+
+	/*
+	 * let's use db8500 thermal style
+	 */
+	sprintf(prop_name, "trip%d-temp", priv->id);
+	if (of_property_read_s32(np, prop_name, &val))
+		return;
+
+	if (val < -45000 ||
+	    val > 125000) {
+		dev_err(dev, "unsupported trip temp, use default\n");
+		return;
+	}
+
+	/* overwrite trip temp */
+	priv->trip_temp = val;
+}
+
 static int rcar_thermal_probe(struct platform_device *pdev)
 {
 	struct rcar_thermal_common *common;
@@ -418,11 +443,14 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 
 		priv->common = common;
 		priv->id = i;
+		priv->trip_temp = MCELSIUS(90); /* default*/
 		mutex_init(&priv->lock);
 		INIT_LIST_HEAD(&priv->list);
 		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
 		rcar_thermal_update_temp(priv);
 
+		rcar_thermal_of_parse(priv);
+
 		priv->zone = thermal_zone_device_register("rcar_thermal",
 						1, 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,