diff mbox

[v1,4/8] dt-bindings: add documentation of rk3228 clock controller

Message ID 1449651853-1667-5-git-send-email-jeffy.chen@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jeffy Chen Dec. 9, 2015, 9:04 a.m. UTC 
Add the devicetree binding for the cru on the rk3228 which quite similar
structured as previous clock controllers.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---

 .../bindings/clock/rockchip,rk3228-cru.txt         | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt

Comments

Rob Herring (Arm) Dec. 9, 2015, 8:12 p.m. UTC | #1 
On Wed, Dec 09, 2015 at 05:04:09PM +0800, Jeffy Chen wrote:
> Add the devicetree binding for the cru on the rk3228 which quite similar
> structured as previous clock controllers.
> 
> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>

Seems like there is a lot of duplication across Rockchip cru bindings. 
Perhaps they should be combined? Otherwise:

Acked-by: Rob Herring <robh@kernel.org>

> ---
> 
>  .../bindings/clock/rockchip,rk3228-cru.txt         | 58 ++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
> new file mode 100644
> index 0000000..f323048
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
> @@ -0,0 +1,58 @@
> +* Rockchip RK3228 Clock and Reset Unit
> +
> +The RK3228 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: should be "rockchip,rk3228-cru"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> +  If missing pll rates are not changeable, due to the missing pll lock status.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. All available clocks are defined as
> +preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
> +used in device tree sources. Similar macros exist for the reset sources in
> +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "ext_i2s" - external I2S clock - optional,
> + - "ext_gmac" - external GMAC clock - optional
> + - "ext_hsadc" - external HSADC clock - optional
> + - "phy_50m_out" - output clock of the pll in the mac phy
> +
> +Example: Clock controller node:
> +
> +	cru: cru@20000000 {
> +		compatible = "rockchip,rk3228-cru";
> +		reg = <0x20000000 0x1000>;
> +		rockchip,grf = <&grf>;
> +
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
> +Example: UART controller node that consumes the clock generated by the clock
> +  controller:
> +
> +	uart0: serial@10110000 {
> +		compatible = "snps,dw-apb-uart";
> +		reg = <0x10110000 0x100>;
> +		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clocks = <&cru SCLK_UART0>;
> +	};
> -- 
> 2.1.4
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Heiko Stuebner Dec. 9, 2015, 11:11 p.m. UTC | #2 
Hi Rob,

Am Mittwoch, 9. Dezember 2015, 14:12:00 schrieb Rob Herring:
> On Wed, Dec 09, 2015 at 05:04:09PM +0800, Jeffy Chen wrote:
> > Add the devicetree binding for the cru on the rk3228 which quite similar
> > structured as previous clock controllers.
> > 
> > Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> 
> Seems like there is a lot of duplication across Rockchip cru bindings. 
> Perhaps they should be combined?

You're right and I've put that on my list for the near future.


> Otherwise:
> 
> Acked-by: Rob Herring <robh@kernel.org>

Thanks
Heiko
Heiko Stuebner Dec. 9, 2015, 11:17 p.m. UTC | #3 
Am Mittwoch, 9. Dezember 2015, 17:04:09 schrieb Jeffy Chen:
> Add the devicetree binding for the cru on the rk3228 which quite similar
> structured as previous clock controllers.
> 
> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>

applied to my clock branch with Rob's ack
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
new file mode 100644
index 0000000..f323048
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
@@ -0,0 +1,58 @@ 
+* Rockchip RK3228 Clock and Reset Unit
+
+The RK3228 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3228-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3228-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10110000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10110000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>;
+	};