diff mbox

[V2,06/23] XEN / PCI: Remove the dependence on arch x86 when PCI_MMCONFIG=y

Message ID 1450278993-12664-7-git-send-email-tn@semihalf.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Tomasz Nowicki Dec. 16, 2015, 3:16 p.m. UTC 
In drivers/xen/pci.c, there are arch x86 dependent codes when
CONFIG_PCI_MMCONFIG is enabled, since CONFIG_PCI_MMCONFIG
depends on ACPI, so this will prevent XEN PCI running on other
architectures using ACPI with PCI_MMCONFIG enabled (such as ARM64).

Fortunatly, it can be sloved in a simple way. In drivers/xen/pci.c,
the only x86 dependent code is if ((pci_probe & PCI_PROBE_MMCONF) == 0),
and it's defined in asm/pci_x86.h, the code means that
if the PCI resource is not probed in PCI_PROBE_MMCONF way, just
ingnore the xen mcfg init. Actually this is duplicate, because
if PCI resource is not probed in PCI_PROBE_MMCONF way, the
pci_mmconfig_list will be empty, and the if (list_empty())
after it will do the same job.

So just remove the arch related code and the head file, this
will be no functional change for x86, and also makes xen/pci.c
usable for other architectures.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
---
 drivers/xen/pci.c | 6 ------
 1 file changed, 6 deletions(-)

Comments

Tomasz Nowicki Dec. 17, 2015, 10:25 a.m. UTC | #1 
On 16.12.2015 16:16, Tomasz Nowicki wrote:
> In drivers/xen/pci.c, there are arch x86 dependent codes when
> CONFIG_PCI_MMCONFIG is enabled, since CONFIG_PCI_MMCONFIG
> depends on ACPI, so this will prevent XEN PCI running on other
> architectures using ACPI with PCI_MMCONFIG enabled (such as ARM64).
>
> Fortunatly, it can be sloved in a simple way. In drivers/xen/pci.c,
> the only x86 dependent code is if ((pci_probe & PCI_PROBE_MMCONF) == 0),
> and it's defined in asm/pci_x86.h, the code means that
> if the PCI resource is not probed in PCI_PROBE_MMCONF way, just
> ingnore the xen mcfg init. Actually this is duplicate, because
> if PCI resource is not probed in PCI_PROBE_MMCONF way, the
> pci_mmconfig_list will be empty, and the if (list_empty())
> after it will do the same job.
>
> So just remove the arch related code and the head file, this
> will be no functional change for x86, and also makes xen/pci.c
> usable for other architectures.
>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> ---
>   drivers/xen/pci.c | 6 ------
>   1 file changed, 6 deletions(-)
>
> diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
> index 6785ebb..9a8dbe3 100644
> --- a/drivers/xen/pci.c
> +++ b/drivers/xen/pci.c
> @@ -28,9 +28,6 @@
>   #include <asm/xen/hypervisor.h>
>   #include <asm/xen/hypercall.h>
>   #include "../pci/pci.h"
> -#ifdef CONFIG_PCI_MMCONFIG
> -#include <asm/pci_x86.h>
> -#endif

I noticed that I forgot about:
+#include <linux/ecam.h>

Sorry.

Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomasz Nowicki Dec. 17, 2015, 10:40 a.m. UTC | #2 
On 17.12.2015 11:25, Tomasz Nowicki wrote:
> On 16.12.2015 16:16, Tomasz Nowicki wrote:
>> In drivers/xen/pci.c, there are arch x86 dependent codes when
>> CONFIG_PCI_MMCONFIG is enabled, since CONFIG_PCI_MMCONFIG
>> depends on ACPI, so this will prevent XEN PCI running on other
>> architectures using ACPI with PCI_MMCONFIG enabled (such as ARM64).
>>
>> Fortunatly, it can be sloved in a simple way. In drivers/xen/pci.c,
>> the only x86 dependent code is if ((pci_probe & PCI_PROBE_MMCONF) == 0),
>> and it's defined in asm/pci_x86.h, the code means that
>> if the PCI resource is not probed in PCI_PROBE_MMCONF way, just
>> ingnore the xen mcfg init. Actually this is duplicate, because
>> if PCI resource is not probed in PCI_PROBE_MMCONF way, the
>> pci_mmconfig_list will be empty, and the if (list_empty())
>> after it will do the same job.
>>
>> So just remove the arch related code and the head file, this
>> will be no functional change for x86, and also makes xen/pci.c
>> usable for other architectures.
>>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
>> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>> Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
>> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
>> ---
>>   drivers/xen/pci.c | 6 ------
>>   1 file changed, 6 deletions(-)
>>
>> diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
>> index 6785ebb..9a8dbe3 100644
>> --- a/drivers/xen/pci.c
>> +++ b/drivers/xen/pci.c
>> @@ -28,9 +28,6 @@
>>   #include <asm/xen/hypervisor.h>
>>   #include <asm/xen/hypercall.h>
>>   #include "../pci/pci.h"
>> -#ifdef CONFIG_PCI_MMCONFIG
>> -#include <asm/pci_x86.h>
>> -#endif
>
> I noticed that I forgot about:
> +#include <linux/ecam.h>
>

I did not forget, I added it in patch [PATCH V2 02/23]. Sorry for noise.

Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stefano Stabellini Dec. 21, 2015, 6:12 p.m. UTC | #3 
On Wed, 16 Dec 2015, Tomasz Nowicki wrote:
> In drivers/xen/pci.c, there are arch x86 dependent codes when
> CONFIG_PCI_MMCONFIG is enabled, since CONFIG_PCI_MMCONFIG
> depends on ACPI, so this will prevent XEN PCI running on other
> architectures using ACPI with PCI_MMCONFIG enabled (such as ARM64).
> 
> Fortunatly, it can be sloved in a simple way. In drivers/xen/pci.c,
> the only x86 dependent code is if ((pci_probe & PCI_PROBE_MMCONF) == 0),
> and it's defined in asm/pci_x86.h, the code means that
> if the PCI resource is not probed in PCI_PROBE_MMCONF way, just
> ingnore the xen mcfg init. Actually this is duplicate, because
> if PCI resource is not probed in PCI_PROBE_MMCONF way, the
> pci_mmconfig_list will be empty, and the if (list_empty())
> after it will do the same job.
> 
> So just remove the arch related code and the head file, this
> will be no functional change for x86, and also makes xen/pci.c
> usable for other architectures.
> 
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>


>  drivers/xen/pci.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
> index 6785ebb..9a8dbe3 100644
> --- a/drivers/xen/pci.c
> +++ b/drivers/xen/pci.c
> @@ -28,9 +28,6 @@
>  #include <asm/xen/hypervisor.h>
>  #include <asm/xen/hypercall.h>
>  #include "../pci/pci.h"
> -#ifdef CONFIG_PCI_MMCONFIG
> -#include <asm/pci_x86.h>
> -#endif
>  
>  static bool __read_mostly pci_seg_supported = true;
>  
> @@ -222,9 +219,6 @@ static int __init xen_mcfg_late(void)
>  	if (!xen_initial_domain())
>  		return 0;
>  
> -	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
> -		return 0;
> -
>  	if (list_empty(&pci_mmcfg_list))
>  		return 0;
>  
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomasz Nowicki Dec. 22, 2015, 8:34 a.m. UTC | #4 
On 21.12.2015 19:12, Stefano Stabellini wrote:
> On Wed, 16 Dec 2015, Tomasz Nowicki wrote:
>> In drivers/xen/pci.c, there are arch x86 dependent codes when
>> CONFIG_PCI_MMCONFIG is enabled, since CONFIG_PCI_MMCONFIG
>> depends on ACPI, so this will prevent XEN PCI running on other
>> architectures using ACPI with PCI_MMCONFIG enabled (such as ARM64).
>>
>> Fortunatly, it can be sloved in a simple way. In drivers/xen/pci.c,
>> the only x86 dependent code is if ((pci_probe & PCI_PROBE_MMCONF) == 0),
>> and it's defined in asm/pci_x86.h, the code means that
>> if the PCI resource is not probed in PCI_PROBE_MMCONF way, just
>> ingnore the xen mcfg init. Actually this is duplicate, because
>> if PCI resource is not probed in PCI_PROBE_MMCONF way, the
>> pci_mmconfig_list will be empty, and the if (list_empty())
>> after it will do the same job.
>>
>> So just remove the arch related code and the head file, this
>> will be no functional change for x86, and also makes xen/pci.c
>> usable for other architectures.
>>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
>> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>> Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
>> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
>
> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
>

Thanks Stefano.

Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index 6785ebb..9a8dbe3 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -28,9 +28,6 @@ 
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
 #include "../pci/pci.h"
-#ifdef CONFIG_PCI_MMCONFIG
-#include <asm/pci_x86.h>
-#endif
 
 static bool __read_mostly pci_seg_supported = true;
 
@@ -222,9 +219,6 @@  static int __init xen_mcfg_late(void)
 	if (!xen_initial_domain())
 		return 0;
 
-	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
-		return 0;
-
 	if (list_empty(&pci_mmcfg_list))
 		return 0;