diff mbox

[v4,1/3] input: cygnus-update touchscreen dt node document

Message ID 1456556396-4759-2-git-send-email-raveendra.padasalagi@broadcom.com (mailing list archive)
State Under Review
Headers show

Commit Message

Raveendra Padasalagi Feb. 27, 2016, 6:59 a.m. UTC
In Cygnus SOC touch screen controller registers are shared
with ADC and flex timer. Using readl/writel could lead to
race condition. So touch screen driver is enhanced to support
register access using syscon framework API's to take care of
mutually exclusive access.In addition to this existing touchscreen
node name "tsc" is renamed to "touchscreen".

Hence touchscreen dt node bindings document is updated to take care
of above changes in the touchscreen driver.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../input/touchscreen/brcm,iproc-touchscreen.txt    | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

Comments

Rob Herring (Arm) March 3, 2016, 10:04 p.m. UTC | #1
On Sat, Feb 27, 2016 at 12:29:54PM +0530, Raveendra Padasalagi wrote:
> In Cygnus SOC touch screen controller registers are shared
> with ADC and flex timer. Using readl/writel could lead to
> race condition. So touch screen driver is enhanced to support
> register access using syscon framework API's to take care of
> mutually exclusive access.In addition to this existing touchscreen
> node name "tsc" is renamed to "touchscreen".
> 
> Hence touchscreen dt node bindings document is updated to take care
> of above changes in the touchscreen driver.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
>  .../input/touchscreen/brcm,iproc-touchscreen.txt    | 21 ++++++++++++++++-----
>  1 file changed, 16 insertions(+), 5 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
index 34e3382..25541f3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -2,11 +2,17 @@ 
 
 Required properties:
 - compatible: must be "brcm,iproc-touchscreen"
-- reg: physical base address of the controller and length of memory mapped
-  region.
+- ts_syscon: handler of syscon node defining physical base
+  address of the controller and length of memory mapped region.
+  If this property is selected please make sure MFD_SYSCON config
+  is enabled in the defconfig file.
 - clocks:  The clock provided by the SOC to driver the tsc
 - clock-name:  name for the clock
 - interrupts: The touchscreen controller's interrupt
+- address-cells: Specify the number of u32 entries needed in child nodes.
+  Should set to 1.
+- size-cells: Specify number of u32 entries needed to specify child nodes size
+  in reg property. Should set to 1.
 
 Optional properties:
 - scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
@@ -53,13 +59,18 @@  Optional properties:
 - touchscreen-inverted-x: X axis is inverted (boolean)
 - touchscreen-inverted-y: Y axis is inverted (boolean)
 
-Example:
+Example: An example of touchscreen node
 
-	touchscreen: tsc@0x180A6000 {
+	ts_adc_syscon: ts_adc_syscon@180a6000 {
+		compatible = "brcm,iproc-ts-adc-syscon","syscon";
+		reg = <0x180a6000 0xc30>;
+	};
+
+	touchscreen: touchscreen@180A6000 {
 		compatible = "brcm,iproc-touchscreen";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x180A6000 0x40>;
+		ts_syscon = <&ts_adc_syscon>;
 		clocks = <&adc_clk>;
 		clock-names = "tsc_clk";
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;