diff mbox

[v1,2/4] phy: Add USB Type-C PHY driver for rk3399

Message ID 1464966911-18949-3-git-send-email-zyw@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chris Zhong June 3, 2016, 3:15 p.m. UTC
Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
Type-C PHY is designed to support the USB3 and DP applications. The
PHY basically has two main components: USB3 and DisplyPort. USB3
operates in SuperSpeed mode and the DP can operate at RBR, HBR and
HBR2 data rates.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

---

Changes in v1:
- update the licence note
- init core clock to 50MHz
- use extcon API
- remove unused global
- add some comments for magic num
- change usleep_range(1000, 2000) tousleep_range(1000, 1050)
- remove __func__ from dev_err
- return err number when get clk failed
- remove ADDR_ADJ define
- use devm_clk_get(&pdev->dev, "tcpdcore")

 drivers/phy/Kconfig                    |   7 +
 drivers/phy/Makefile                   |   1 +
 drivers/phy/phy-rockchip-typec.c       | 942 +++++++++++++++++++++++++++++++++
 include/linux/phy/phy-rockchip-typec.h |  20 +
 4 files changed, 970 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-typec.c
 create mode 100644 include/linux/phy/phy-rockchip-typec.h

Comments

Guenter Roeck June 8, 2016, 9:16 p.m. UTC | #1
On Fri, Jun 03, 2016 at 11:15:09PM +0800, Chris Zhong wrote:
> Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
> Type-C PHY is designed to support the USB3 and DP applications. The
> PHY basically has two main components: USB3 and DisplyPort. USB3
> operates in SuperSpeed mode and the DP can operate at RBR, HBR and
> HBR2 data rates.
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> ---
> 
> Changes in v1:
> - update the licence note
> - init core clock to 50MHz
> - use extcon API
> - remove unused global
> - add some comments for magic num
> - change usleep_range(1000, 2000) tousleep_range(1000, 1050)
> - remove __func__ from dev_err
> - return err number when get clk failed
> - remove ADDR_ADJ define
> - use devm_clk_get(&pdev->dev, "tcpdcore")
> 
>  drivers/phy/Kconfig                    |   7 +
>  drivers/phy/Makefile                   |   1 +
>  drivers/phy/phy-rockchip-typec.c       | 942 +++++++++++++++++++++++++++++++++
>  include/linux/phy/phy-rockchip-typec.h |  20 +
>  4 files changed, 970 insertions(+)
>  create mode 100644 drivers/phy/phy-rockchip-typec.c
>  create mode 100644 include/linux/phy/phy-rockchip-typec.h
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..dc388a3d 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -351,6 +351,13 @@ config PHY_ROCKCHIP_DP
>  	help
>  	  Enable this to support the Rockchip Display Port PHY.
>  
> +config PHY_ROCKCHIP_TYPEC
> +	tristate "Rockchip TYPEC PHY Driver"
> +	depends on ARCH_ROCKCHIP && OF
> +	select GENERIC_PHY

Should also select RESET_CONTROLLER.

> +	help
> +	  Enable this to support the Rockchip USB TYPEC PHY.
> +
>  config PHY_ST_SPEAR1310_MIPHY
>  	tristate "ST SPEAR1310-MIPHY driver"
>  	select GENERIC_PHY
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..91fa413 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -39,6 +39,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>  obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
>  obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
> +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
>  obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
>  obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
> diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
> new file mode 100644
> index 0000000..40be944
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-typec.c
> @@ -0,0 +1,942 @@
> +/*
> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
> + * Author: Chris Zhong <zyw@rock-chips.com>
> + *         Kever Yang <kever.yang@rock-chips.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/extcon.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/delay.h>
> +#include <linux/phy/phy-rockchip-typec.h>

alphabetic order

> +
> +#define CMN_SSM_BANDGAP			(0x21 << 2)
> +#define CMN_SSM_BIAS			(0x22 << 2)
> +#define CMN_PLLSM0_PLLEN		(0x29 << 2)
> +#define CMN_PLLSM0_PLLPRE		(0x2a << 2)
> +#define CMN_PLLSM0_PLLVREF		(0x2b << 2)
> +#define CMN_PLLSM0_PLLLOCK		(0x2c << 2)
> +#define CMN_PLLSM1_PLLEN		(0x31 << 2)
> +#define CMN_PLLSM1_PLLPRE		(0x32 << 2)
> +#define CMN_PLLSM1_PLLVREF		(0x33 << 2)
> +#define CMN_PLLSM1_PLLLOCK		(0x34 << 2)
> +#define CMN_PLLSM1_USER_DEF_CTRL	(0x37 << 2)
> +#define CMN_ICAL_OVRD			(0xc1 << 2)
> +#define CMN_PLL0_VCOCAL_OVRD		(0x83 << 2)
> +#define CMN_PLL0_VCOCAL_INIT		(0x84 << 2)
> +#define CMN_PLL0_VCOCAL_ITER		(0x85 << 2)
> +#define CMN_PLL0_LOCK_REFCNT_START	(0x90 << 2)
> +#define CMN_PLL0_LOCK_PLLCNT_START	(0x92 << 2)
> +#define CMN_PLL0_LOCK_PLLCNT_THR	(0x93 << 2)
> +#define CMN_PLL0_INTDIV			(0x94 << 2)
> +#define CMN_PLL0_FRACDIV		(0x95 << 2)
> +#define CMN_PLL0_HIGH_THR		(0x96 << 2)
> +#define CMN_PLL0_DSM_DIAG		(0x97 << 2)
> +#define CMN_PLL0_SS_CTRL1		(0x98 << 2)
> +#define CMN_PLL0_SS_CTRL2		(0x99 << 2)
> +#define CMN_PLL1_VCOCAL_START		(0xa1 << 2)
> +#define CMN_PLL1_VCOCAL_OVRD		(0xa3 << 2)
> +#define CMN_PLL1_VCOCAL_INIT		(0xa4 << 2)
> +#define CMN_PLL1_VCOCAL_ITER		(0xa5 << 2)
> +#define CMN_PLL1_LOCK_REFCNT_START	(0xb0 << 2)
> +#define CMN_PLL1_LOCK_PLLCNT_START	(0xb2 << 2)
> +#define CMN_PLL1_LOCK_PLLCNT_THR	(0xb3 << 2)
> +#define CMN_PLL1_INTDIV			(0xb4 << 2)
> +#define CMN_PLL1_FRACDIV		(0xb5 << 2)
> +#define CMN_PLL1_HIGH_THR		(0xb6 << 2)
> +#define CMN_PLL1_DSM_DIAG		(0xb7 << 2)
> +#define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
> +#define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
> +#define CMN_RXCAL_OVRD			(0xd1 << 2)
> +#define CMN_TXPUCAL_CTRL		(0xe0 << 2)
> +#define CMN_TXPUCAL_OVRD		(0xe1 << 2)
> +#define CMN_TXPDCAL_OVRD		(0xf1 << 2)
> +#define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
> +#define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
> +#define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
> +#define CMN_DIAG_PLL0_V2I_TUNE		(0x1c5 << 2)
> +#define CMN_DIAG_PLL0_CP_TUNE		(0x1c6 << 2)
> +#define CMN_DIAG_PLL0_LF_PROG		(0x1c7 << 2)
> +#define CMN_DIAG_PLL1_FBH_OVRD		(0x1d0 << 2)
> +#define CMN_DIAG_PLL1_FBL_OVRD		(0x1d1 << 2)
> +#define CMN_DIAG_PLL1_OVRD		(0x1d2 << 2)
> +#define CMN_DIAG_PLL1_V2I_TUNE		(0x1d5 << 2)
> +#define CMN_DIAG_PLL1_CP_TUNE		(0x1d6 << 2)
> +#define CMN_DIAG_PLL1_LF_PROG		(0x1d7 << 2)
> +#define CMN_DIAG_PLL1_PTATIS_TUNE1	(0x1d8 << 2)
> +#define CMN_DIAG_PLL1_PTATIS_TUNE2	(0x1d9 << 2)
> +#define CMN_DIAG_PLL1_INCLK_CTRL	(0x1da << 2)
> +#define CMN_DIAG_HSCLK_SEL		(0x1e0 << 2)
> +
> +#define XCVR_PSM_RCTRL(n)		((0x4001 | (n << 9)) << 2)
> +#define XCVR_PSM_CAL_TMR(n)		((0x4002 | (n << 9)) << 2)
> +#define XCVR_PSM_A0IN_TMR(n)		((0x4003 | (n << 9)) << 2)
> +#define TX_TXCC_CAL_SCLR_MULT(n)	((0x4047 | (n << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_00(n)	((0x404c | (n << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_01(n)	((0x404d | (n << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_10(n)	((0x404e | (n << 9)) << 2)
> +#define TX_TXCC_CPOST_MULT_11(n)	((0x404f | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_000(n)	((0x4050 | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_001(n)	((0x4051 | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_010(n)	((0x4052 | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_011(n)	((0x4053 | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_100(n)	((0x4054 | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | (n << 9)) << 2)
> +#define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | (n << 9)) << 2)
> +#define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | (n << 9)) << 2)
> +#define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | (n << 9)) << 2)
> +#define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | (n << 9)) << 2)
> +#define TX_PSC_A0(n)			((0x4100 | (n << 9)) << 2)
> +#define TX_PSC_A1(n)			((0x4101 | (n << 9)) << 2)
> +#define TX_PSC_A2(n)			((0x4102 | (n << 9)) << 2)
> +#define TX_PSC_A3(n)			((0x4103 | (n << 9)) << 2)
> +#define TX_RCVDET_CTRL(n)		((0x4120 | (n << 9)) << 2)
> +#define TX_RCVDET_EN_TMR(n)		((0x4122 | (n << 9)) << 2)
> +#define TX_RCVDET_ST_TMR(n)		((0x4123 | (n << 9)) << 2)
> +#define TX_DIAG_TX_DRV(n)		((0x41e1 | (n << 9)) << 2)
> +#define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
> +#define TX_ANA_CTRL_REG_1		(0x5020 << 2)
> +#define TX_ANA_CTRL_REG_2		(0x5021 << 2)
> +#define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
> +#define TX_DIG_CTRL_REG_2		(0x5024 << 2)
> +#define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
> +#define TX_ANA_CTRL_REG_3		(0x5026 << 2)
> +#define TX_ANA_CTRL_REG_4		(0x5027 << 2)
> +#define TX_ANA_CTRL_REG_5		(0x5029 << 2)
> +
> +#define RX_PSC_A0(n)			((0x8000 | (n << 9)) << 2)
> +#define RX_PSC_A1(n)			((0x8001 | (n << 9)) << 2)
> +#define RX_PSC_A2(n)			((0x8002 | (n << 9)) << 2)
> +#define RX_PSC_A3(n)			((0x8003 | (n << 9)) << 2)
> +#define RX_PSC_CAL(n)			((0x8006 | (n << 9)) << 2)
> +#define RX_PSC_RDY(n)			((0x8007 | (n << 9)) << 2)
> +#define RX_IQPI_ILL_CAL_OVRD		(0x8023 << 2)
> +#define RX_EPI_ILL_CAL_OVRD		(0x8033 << 2)
> +#define RX_SDCAL0_OVRD			(0x8041 << 2)
> +#define RX_SDCAL1_OVRD			(0x8049 << 2)
> +#define RX_SLC_INIT			(0x806d << 2)
> +#define RX_SLC_RUN			(0x806e << 2)
> +#define RX_CDRLF_CNFG2			(0x8081 << 2)
> +#define RX_SIGDET_HL_FILT_TMR(n)	((0x8090 | (n << 9)) << 2)
> +#define RX_SLC_IOP0_OVRD		(0x8101 << 2)
> +#define RX_SLC_IOP1_OVRD		(0x8105 << 2)
> +#define RX_SLC_QOP0_OVRD		(0x8109 << 2)
> +#define RX_SLC_QOP1_OVRD		(0x810d << 2)
> +#define RX_SLC_EOP0_OVRD		(0x8111 << 2)
> +#define RX_SLC_EOP1_OVRD		(0x8115 << 2)
> +#define RX_SLC_ION0_OVRD		(0x8119 << 2)
> +#define RX_SLC_ION1_OVRD		(0x811d << 2)
> +#define RX_SLC_QON0_OVRD		(0x8121 << 2)
> +#define RX_SLC_QON1_OVRD		(0x8125 << 2)
> +#define RX_SLC_EON0_OVRD		(0x8129 << 2)
> +#define RX_SLC_EON1_OVRD		(0x812d << 2)
> +#define RX_SLC_IEP0_OVRD		(0x8131 << 2)
> +#define RX_SLC_IEP1_OVRD		(0x8135 << 2)
> +#define RX_SLC_QEP0_OVRD		(0x8139 << 2)
> +#define RX_SLC_QEP1_OVRD		(0x813d << 2)
> +#define RX_SLC_EEP0_OVRD		(0x8141 << 2)
> +#define RX_SLC_EEP1_OVRD		(0x8145 << 2)
> +#define RX_SLC_IEN0_OVRD		(0x8149 << 2)
> +#define RX_SLC_IEN1_OVRD		(0x814d << 2)
> +#define RX_SLC_QEN0_OVRD		(0x8151 << 2)
> +#define RX_SLC_QEN1_OVRD		(0x8155 << 2)
> +#define RX_SLC_EEN0_OVRD		(0x8159 << 2)
> +#define RX_SLC_EEN1_OVRD		(0x815d << 2)
> +#define RX_DIAG_SIGDET_TUNE(n)		((0x81dc | (n << 9)) << 2)
> +#define RX_DIAG_SC2C_DELAY		(0x81e1 << 2)
> +
> +#define PMA_LANE_CFG			(0xc000 << 2)
> +#define PIPE_CMN_CTRL1			(0xc001 << 2)
> +#define PIPE_CMN_CTRL2			(0xc002 << 2)
> +#define PIPE_COM_LOCK_CFG1		(0xc003 << 2)
> +#define PIPE_COM_LOCK_CFG2		(0xc004 << 2)
> +#define PIPE_RCV_DET_INH		(0xc005 << 2)
> +#define DP_MODE_CTL			(0xc008 << 2)
> +#define DP_CLK_CTL			(0xc009 << 2)
> +#define STS				(0xc00F << 2)
> +#define PHY_ISO_CMN_CTRL		(0xc010 << 2)
> +#define PHY_DP_TX_CTL			(0xc408 << 2)
> +#define PMA_CMN_CTRL1			(0xc800 << 2)
> +#define PHY_PMA_ISO_CMN_CTRL		(0xc810 << 2)
> +#define PHY_ISOLATION_CTRL		(0xc81f << 2)
> +#define PHY_PMA_ISO_XCVR_CTRL(n)	((0xcc11 | (n << 6)) << 2)
> +#define PHY_PMA_ISO_LINK_MODE(n)	((0xcc12 | (n << 6)) << 2)
> +#define PHY_PMA_ISO_PWRST_CTRL(n)	((0xcc13 | (n << 6)) << 2)
> +#define PHY_PMA_ISO_TX_DATA_LO(n)	((0xcc14 | (n << 6)) << 2)
> +#define PHY_PMA_ISO_TX_DATA_HI(n)	((0xcc15 | (n << 6)) << 2)
> +#define PHY_PMA_ISO_RX_DATA_LO(n)	((0xcc16 | (n << 6)) << 2)
> +#define PHY_PMA_ISO_RX_DATA_HI(n)	((0xcc17 | (n << 6)) << 2)
> +#define TX_BIST_CTRL(n)			((0x4140 | (n << 9)) << 2)
> +#define TX_BIST_UDDWR(n)		((0x4141 | (n << 9)) << 2)
> +
> +#define DP_PLL_CLOCK_ENABLE		BIT(2)
> +#define DP_PLL_ENABLE			BIT(0)
> +#define DP_PLL_DATA_RATE_RBR		((2 << 12) | (4 << 8))
> +#define DP_PLL_DATA_RATE_HBR		((2 << 12) | (4 << 8))
> +#define DP_PLL_DATA_RATE_HBR2		((1 << 12) | (2 << 8))
> +
> +#define GRF_SOC_CON26			0x6268
> +#define UPHY_DP_SEL			BIT(3)
> +#define UPHY_DP_SEL_MASK		BIT(19)
> +#define DPTX_HDP_SEL			(3 << 12)
> +#define DPTX_HDP_SEL_MASK		(3 << 28)
> +
> +#define PHY_MODE_SET_TIMEOUT		1000000
> +
> +#define	MODE_DISCONNECT			0
> +#define	MODE_UFP_USB			BIT(0)
> +#define	MODE_DFP_USB			BIT(1)
> +#define	MODE_DFP_DP			BIT(2)
> +
> +struct usb3phy_reg {
> +	u32	offset;
> +	u32	val_bit;
> +	u32	write_enable;
> +	u32	enable;
> +	u32	disable;
> +};
> +
> +struct rockchip_usb3phy_port_cfg {
> +	u32 port_id;
> +	struct usb3phy_reg	typec_conn_dir;
> +	struct usb3phy_reg	usb3tousb2_en;
> +	struct usb3phy_reg	external_psm;
> +	struct usb3phy_reg	pipe_status;
> +	struct usb3phy_reg	dptx_hpd_sel;
> +	struct usb3phy_reg	uphy_dp_sel;
> +};
> +
> +struct rockchip_typec_phy {
> +	struct device		*dev;
> +	void __iomem		*base;
> +	struct extcon_dev	*extcon;
> +	struct phy		*phy;
> +	struct regmap		*grf_regs;
> +	struct clk		*clk_core;
> +	struct clk		*clk_ref;
> +	struct reset_control	*phy_rst;
> +	struct reset_control	*pipe_rst;
> +	struct reset_control	*uphy_rst;
> +	const struct rockchip_usb3phy_port_cfg	*port_cfgs;
> +
> +	/* to receive notifier from PD */
> +	struct notifier_block	event_nb;
> +	struct delayed_work	event_wq;
> +
> +	bool flip;
> +	int mode;
> +	int map;
> +};
> +
> +struct phy_reg {
> +	int value;
> +	int addr;
> +};
> +
> +struct phy_reg usb_pll_cfg[] = {
> +	{0xf0,		CMN_PLL0_VCOCAL_INIT},
> +	{0x18,		CMN_PLL0_VCOCAL_ITER},
> +	{0xd0,		CMN_PLL0_INTDIV},
> +	{0x4a4a,	CMN_PLL0_FRACDIV},
> +	{0x34,		CMN_PLL0_HIGH_THR},
> +	{0x1ee,		CMN_PLL0_SS_CTRL1},
> +	{0x7f03,	CMN_PLL0_SS_CTRL2},
> +	{0x20,		CMN_PLL0_DSM_DIAG},
> +	{0,		CMN_DIAG_PLL0_OVRD},
> +	{0,		CMN_DIAG_PLL0_FBH_OVRD},
> +	{0,		CMN_DIAG_PLL0_FBL_OVRD},
> +	{0x7,		CMN_DIAG_PLL0_V2I_TUNE},
> +	{0x45,		CMN_DIAG_PLL0_CP_TUNE},
> +	{0x8,		CMN_DIAG_PLL0_LF_PROG},
> +};
> +
> +struct phy_reg dp_pll_cfg[] = {
> +	{0xf0,		CMN_PLL1_VCOCAL_INIT},
> +	{0x18,		CMN_PLL1_VCOCAL_ITER},
> +	{0x30b9,	CMN_PLL1_VCOCAL_START},
> +	{0x21c,		CMN_PLL1_INTDIV},
> +	{0,		CMN_PLL1_FRACDIV},
> +	{0x5,		CMN_PLL1_HIGH_THR},
> +	{0x35,		CMN_PLL1_SS_CTRL1},
> +	{0x7f1e,	CMN_PLL1_SS_CTRL2},
> +	{0x20,		CMN_PLL1_DSM_DIAG},
> +	{0,		CMN_PLLSM1_USER_DEF_CTRL},
> +	{0,		CMN_DIAG_PLL1_OVRD},
> +	{0,		CMN_DIAG_PLL1_FBH_OVRD},
> +	{0,		CMN_DIAG_PLL1_FBL_OVRD},
> +	{0x6,		CMN_DIAG_PLL1_V2I_TUNE},
> +	{0x45,		CMN_DIAG_PLL1_CP_TUNE},
> +	{0x8,		CMN_DIAG_PLL1_LF_PROG},
> +	{0x100,		CMN_DIAG_PLL1_PTATIS_TUNE1},
> +	{0x7,		CMN_DIAG_PLL1_PTATIS_TUNE2},
> +	{0x4,		CMN_DIAG_PLL1_INCLK_CTRL},
> +};
> +
> +static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy,
> +			  u32 num_lanes)
> +{
> +	u32 i;
> +
> +	/*
> +	 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
> +	 * cmn_psm_clk_dig_div = 2, set the clk division to 2
> +	 */
> +	writel(0x830, tcphy->base + PMA_CMN_CTRL1);
> +	for (i = 0; i < num_lanes; i++) {
> +		/*
> +		 * The following PHY configuration assumes a 24 MHz reference
> +		 * clocks.

s/clocks/clock/ or just "clocks", but not "a ... clocks"

> +		 */
> +		writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
> +		writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
> +		writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
> +	}
> +}
> +
> +static void tcphy_cfg_usb_pll(struct rockchip_typec_phy *tcphy)
> +{
> +	u32 rdata;
> +	u32 i;
> +
> +	/*
> +	 * Selects which PLL clock will be driven on the analog high speed
> +	 * clock 0: PLL 0 div 1.
> +	 */
> +	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
> +	writel(rdata & 0xfffc, tcphy->base + CMN_DIAG_HSCLK_SEL);
> +
> +	/* load the configuration of PLL0 */
> +	for (i = 0; i < ARRAY_SIZE(usb_pll_cfg); i++)
> +		writel(usb_pll_cfg[i].value, tcphy->base + usb_pll_cfg[i].addr);
> +}
> +
> +static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
> +{
> +	u32 rdata;
> +	u32 i;
> +
> +	/* set the default mode to RBR */
> +	writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
> +	       tcphy->base + DP_CLK_CTL);
> +
> +	/*
> +	 * Selects which PLL clock will be driven on the analog high speed
> +	 * clock 1: PLL 1 div 2.
> +	 */
> +	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
> +	rdata = (rdata & 0xffcf) | 0x30;
> +	writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
> +
> +	/* load the configuration of PLL1 */
> +	for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
> +		writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
> +}
> +
> +static void tcphy_tx_usb_cfg_lane(struct rockchip_typec_phy *tcphy,
> +				  u32 lane)
> +{
> +	writel(0x7799, tcphy->base + TX_PSC_A0(lane));
> +	writel(0x7798, tcphy->base + TX_PSC_A1(lane));
> +	writel(0x5098, tcphy->base + TX_PSC_A2(lane));
> +	writel(0x5098, tcphy->base + TX_PSC_A3(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
> +	writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
> +}
> +
> +static void tcphy_rx_usb_cfg_lane(struct rockchip_typec_phy *tcphy,
> +				  u32 lane)
> +{
> +	writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
> +	writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
> +	writel(0xa410, tcphy->base + RX_PSC_A2(lane));
> +	writel(0x2410, tcphy->base + RX_PSC_A3(lane));
> +	writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
> +	writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
> +	writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
> +	writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
> +	writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
> +}
> +
> +static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy,
> +			      u32 lane)
> +{
> +	u32 rdata;
> +
> +	writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
> +	writel(0x6799, tcphy->base + TX_PSC_A0(lane));
> +	writel(0x6798, tcphy->base + TX_PSC_A1(lane));
> +	writel(0x98, tcphy->base + TX_PSC_A2(lane));
> +	writel(0x98, tcphy->base + TX_PSC_A3(lane));
> +
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
> +	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
> +	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
> +	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
> +	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
> +	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
> +
> +	writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
> +	writel(0x700, tcphy->base + TX_DIAG_TX_DRV(lane));
> +
> +	rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
> +	rdata = (rdata & 0x8fff) | 0x6000;
> +	writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
> +}
> +
> +static void tcphy_cfg_pin_assign(struct rockchip_typec_phy *tcphy)
> +{
> +	switch (tcphy->map) {
> +	case PIN_MAP_A:
> +		writel(0x19d5, tcphy->base + PMA_LANE_CFG);
> +		break;
> +	case PIN_MAP_B:
> +		writel(0x1500, tcphy->base + PMA_LANE_CFG);
> +		break;
> +	case PIN_MAP_C:
> +	case PIN_MAP_E:
> +		writel(0x51d9, tcphy->base + PMA_LANE_CFG);
> +		break;
> +	case PIN_MAP_D:
> +	case PIN_MAP_F:
> +		writel(0x5100, tcphy->base + PMA_LANE_CFG);
> +		break;
> +	};
> +}
> +
> +static void tcphy_cfg_lanes(struct rockchip_typec_phy *tcphy,
> +			    u32 link_cfg)
> +{
> +	u32 i;
> +
> +	/* PMA lane configuration DP or USB3 */
> +	for (i = 0; i < 4; i++) {
> +		if ((link_cfg >> i) & 0x1) {
> +			tcphy_dp_cfg_lane(tcphy, i);
> +		} else {
> +			/*
> +			 * lan0 TX and lan1 RX for USB3 Normal direction
> +			 * lan3 TX and lan2 RX for USB3 Flip direction
> +			 */
> +			if (i == 0 || i == 3)
> +				tcphy_tx_usb_cfg_lane(tcphy, i);
> +			else
> +				tcphy_rx_usb_cfg_lane(tcphy, i);
> +		}
> +	}
> +}
> +
> +static inline int property_enable(struct rockchip_typec_phy *tcphy,
> +				  const struct usb3phy_reg *reg, bool en)
> +{
> +	int mask = reg->enable << reg->write_enable;
> +	int val = (en ? reg->enable : reg->disable) << reg->val_bit;
> +
> +	return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
> +}
> +
> +static void tcphy_cfg_flip_set(struct rockchip_typec_phy *tcphy)
> +{
> +	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
> +
> +	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
> +
> +	tcphy_cfg_24m(tcphy, 0x4);
> +
> +	if (tcphy->mode == MODE_UFP_USB ||
> +	    (tcphy->mode & MODE_DFP_USB))

Unnecessary continuation line

> +		tcphy_cfg_usb_pll(tcphy);
> +
> +	if (tcphy->mode & MODE_DFP_DP)
> +		tcphy_cfg_dp_pll(tcphy);
> +
> +	if (tcphy->mode == MODE_DFP_DP)

Mixing all those modes and comparisons is confusing.

Sometimes you have "tcphy->mode & MODE_DFP_DP", sometimes "tcphy->mode ==
MODE_DFP_DP". For the outsider, that makes it all but impossible to determine
what is correct in a given situation.

From the mode setting code, the following combinations for 'mode' exist.

	MODE_UFP_USB
	MODE_DFP_USB | MODE_DFP_DP
	MODE_DFP_DP
	MODE_DFP_USB
	MODE_DISCONNECT

I think it would be cleaner and less error prone if you would use separate
values for those modes and, if necessary, perform two comparisons instead of
using a mask.

> +		tcphy_cfg_lanes(tcphy, 0xf);
> +	else if (tcphy->flip)
> +		tcphy_cfg_lanes(tcphy, 0x3);
> +	else
> +		tcphy_cfg_lanes(tcphy, 0xc);
> +}
> +
> +static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
> +{
> +	int rdata, rdata2, val;
> +
> +	/* disable txda_cal_latch_en for rewrite the calibration values */
> +	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
> +	val = rdata & 0xdfff;
> +	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +	/*
> +	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
> +	 * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
> +	 * works.
> +	 */
> +	rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
> +	rdata = rdata & 0xffc0;
> +
> +	rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
> +	rdata2 = rdata2 & 0x3f;
> +
> +	val = rdata | rdata2;
> +	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
> +	usleep_range(1000, 1050);
> +
> +	/*
> +	 * Enable signal for latch that sample and holds calibration values.
> +	 * Activate this signal for 1 clock cycle to sample new calibration
> +	 * values.
> +	 */
> +	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
> +	val = rdata | 0x2000;
> +	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
> +	usleep_range(150, 200);
> +
> +	/* set TX Voltage Level and TX Deemphasis to 0 */
> +	writel(0, tcphy->base + PHY_DP_TX_CTL);
> +	/* re-enable decap */
> +	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
> +	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
> +	writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
> +	writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
> +
> +	/*
> +	 * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
> +	 * voltage 16'h1001 for DP-AUX-TX and RX
> +	 */
> +	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
> +
> +	/* re-enables Bandgap reference for LDO */
> +	writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
> +	writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +	/*
> +	 * re-enables the transmitter pre-driver, driver data selection MUX,
> +	 * and receiver detect circuits.
> +	 */
> +	writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
> +	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
> +
> +	/*
> +	 * Controls auxda_polarity, which selects the polarity of the xcvr
> +	 * 1'b1 : Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
> +	 * down aux_m)
> +	 * 1'b0 : Normal polarity (if TYPE_C, pulls up aux_m and pulls down
> +	 * aux_p)
> +	 */
> +	if (tcphy->flip)
> +		writel(0xa078, tcphy->base + TX_ANA_CTRL_REG_1);
> +	else
> +		writel(0xb078, tcphy->base + TX_ANA_CTRL_REG_1);
> +
> +	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
> +	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
> +	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
> +
> +	/*
> +	 * Controls low_power_swing_en, set the voltage swing of the driver
> +	 * to 400mv. The values	below are peak to peak (differential) values.
> +	 */
> +	writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
> +	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
> +
> +	/* Controls tx_high_z_tm_en */
> +	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
> +	val |= BIT(15);
> +	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
> +}
> +
> +static void tcphy_dp_hpd(struct rockchip_typec_phy *tcphy,
> +			 u8 mode)

bool mode ? Though I wonder if separate enable and disable functions
would make more sense - the function is always called with constant
arguments.

> +{
> +	/* force hpd */
> +	if (mode)
> +		regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
> +			     DPTX_HDP_SEL_MASK | DPTX_HDP_SEL);
> +	else
> +		regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
> +			     DPTX_HDP_SEL_MASK);
> +}
> +
> +static int tcphy_usb3_init(struct rockchip_typec_phy *tcphy)
> +{

The caller doesn't check the error code. Why bother returning one ?

> +	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
> +	const struct usb3phy_reg *reg = &cfg->pipe_status;
> +	int timeout = 0;
> +	int val;
> +

regmap_read returns unsigned int

> +	/* wait TCPHY for pipe ready */
> +	while (1) {
> +		regmap_read(tcphy->grf_regs, reg->offset, &val);
> +		if (!(val & (reg->enable << reg->val_bit)))
> +			break;
> +
> +		timeout++;
> +		if (timeout > 1000) {
> +			dev_err(tcphy->dev, "wait pipe ready timeout!\n");
> +			return -EBUSY;
> +		}
> +		usleep_range(10, 20);
> +	}

Maybe personal preference, but something like

	for (timeout = 0; timeout <= 1000; timeout++) {
		...
		if (!(val & (reg->enable << reg->val_bit)))
			return;
		usleep_range(10, 20);
	}
	dev_err(tcphy->dev, "wait pipe ready timeout!\n");

seems to be a bit cleaner.

> +
> +	return 0;
> +}
> +
> +static int tcphy_dp_init(struct rockchip_typec_phy *tcphy)
> +{

Return value is not checked.

> +	int ret, val;
> +
> +	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
> +				 val, val & BIT(6), 1000, PHY_MODE_SET_TIMEOUT);
> +	if (ret < 0) {
> +		dev_err(tcphy->dev, "failed to wait TCPHY for DP ready\n");
> +		return -EBUSY;

Why -EBUSY and not ret ? Static analyzers may complain about it.
Or just don't return anything since the calling code doesn't check it anyway.

> +	}
> +
> +	tcphy_dp_aux_calibration(tcphy);
> +
> +	if (tcphy->mode & MODE_DFP_USB)
> +		writel(0xc101, tcphy->base + DP_MODE_CTL);
> +	else
> +		writel(0x0101, tcphy->base + DP_MODE_CTL);
> +
> +	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
> +				 val, val & BIT(4), 1000, PHY_MODE_SET_TIMEOUT);
> +	if (ret < 0) {
> +		dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
> +		return -EBUSY;

Why -EBUSY ?

> +	}
> +
> +	return 0;
> +}
> +
> +static int tcphy_phy_init(struct rockchip_typec_phy *tcphy)
> +{

Return value is not checked.

> +	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
> +
> +	int timeout = 0;
> +	int ret;
> +
> +	ret = clk_prepare_enable(tcphy->clk_core);
> +	if (ret) {
> +		dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
> +		return ret;
> +	}
> +
> +	ret = clk_set_rate(tcphy->clk_core, 50000000);
> +	if (ret) {
> +		dev_err(tcphy->dev, "set type-c phy core clk rate failed\n");
> +		goto clk_ref_failed;
> +	}
> +
> +	ret = clk_prepare_enable(tcphy->clk_ref);
> +	if (ret) {
> +		dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
> +		goto clk_ref_failed;
> +	}
> +
> +	/* select external psm clock */
> +	property_enable(tcphy, &cfg->external_psm, 1);
> +	property_enable(tcphy, &cfg->usb3tousb2_en, 0);
> +
> +	reset_control_assert(tcphy->phy_rst);
> +	reset_control_assert(tcphy->pipe_rst);
> +	reset_control_assert(tcphy->uphy_rst);
> +
> +	property_enable(tcphy, &cfg->uphy_dp_sel, cfg->port_id);
> +
> +	reset_control_deassert(tcphy->uphy_rst);
> +
> +	tcphy_cfg_flip_set(tcphy);
> +
> +	tcphy_cfg_pin_assign(tcphy);
> +
> +	if (tcphy->mode & MODE_DFP_DP) {
> +		if (tcphy->mode & MODE_DFP_USB)
> +			writel(0xc104, tcphy->base + DP_MODE_CTL);
> +		else
> +			writel(0x0104, tcphy->base + DP_MODE_CTL);
> +	}
> +
> +	reset_control_deassert(tcphy->phy_rst);
> +
> +	while (!(readl(tcphy->base + PMA_CMN_CTRL1) & 1)) {
> +		timeout++;
> +		if (timeout > 1000) {
> +			dev_err(tcphy->dev, "wait pma ready timeout!\n");
> +			goto timeout_failed;
> +		}
> +		usleep_range(10, 20);
> +	}

Does readx_poll_timeout() not work here ?

> +
> +	reset_control_deassert(tcphy->pipe_rst);
> +
> +	return ret;

	return 0;

> +
> +timeout_failed:
> +	clk_disable_unprepare(tcphy->clk_core);

Should this be clk_ref ?

> +clk_ref_failed:
> +	clk_disable_unprepare(tcphy->clk_core);
> +	return ret;
> +}
> +
> +static int tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
> +{

Return value is not checked.

> +	clk_disable_unprepare(tcphy->clk_core);
> +	clk_disable_unprepare(tcphy->clk_ref);
> +
> +	return 0;
> +}
> +
> +static int rockchip_typec_phy_power_on(struct phy *_phy)
> +{
> +	return 0;
> +}
> +
> +static int rockchip_typec_phy_power_off(struct phy *_phy)
> +{
> +	return 0;
> +}
> +
> +static const struct phy_ops rockchip_tcphy_ops = {
> +	.power_on       = rockchip_typec_phy_power_on,
> +	.power_off      = rockchip_typec_phy_power_off,

Why specify those functions if they don't do anything ?
AFAICS they are optional.

> +	.owner          = THIS_MODULE,
> +};
> +
> +static int tcphy_pd_event(struct notifier_block *nb,
> +			  unsigned long event, void *priv)
> +{
> +	struct rockchip_typec_phy *tcphy;
> +	struct extcon_dev *edev = (struct extcon_dev *)priv;

Unnecessary typecast from void *

> +	int value = edev->state;
> +	int mode;
> +	u8 is_plugged, dfp;
> +
> +	tcphy = container_of(nb, struct rockchip_typec_phy, event_nb);
> +
> +	is_plugged = GET_PLUGGED(value);
> +	tcphy->flip = GET_FLIP(value);
> +	dfp = GET_DFP(value);
> +	tcphy->map = GET_PIN_MAP(value);
> +
> +	if (is_plugged) {
> +		if (!dfp)
> +			mode = MODE_UFP_USB;
> +		else if (tcphy->map & (PIN_MAP_B | PIN_MAP_D | PIN_MAP_F))
> +			mode = MODE_DFP_USB | MODE_DFP_DP;
> +		else if (tcphy->map & (PIN_MAP_A | PIN_MAP_C | PIN_MAP_E))
> +			mode = MODE_DFP_DP;
> +		else
> +			mode = MODE_DFP_USB;
> +	} else {
> +		mode = MODE_DISCONNECT;
> +	}
> +
> +	if (tcphy->mode != mode) {
> +		tcphy->mode = mode;
> +		schedule_delayed_work_on(0, &tcphy->event_wq, 0);
> +	}
> +
> +	return 0;
> +}
> +
> +static void tcphy_event_wq(struct work_struct *work)
> +{
> +	struct rockchip_typec_phy *tcphy;
> +
> +	tcphy = container_of(work, struct rockchip_typec_phy, event_wq.work);
> +
> +	if (tcphy->mode == MODE_DISCONNECT) {
> +		tcphy_phy_deinit(tcphy);
> +		tcphy_dp_hpd(tcphy, 0);
> +	} else {
> +		tcphy_phy_init(tcphy);
> +		if (tcphy->mode & (MODE_UFP_USB | MODE_DFP_USB))
> +			tcphy_usb3_init(tcphy);
> +
> +		if (tcphy->mode & MODE_DFP_DP) {
> +			tcphy_dp_init(tcphy);
> +			tcphy_dp_hpd(tcphy, 1);
> +		}
> +	}
> +}
> +
> +static const struct of_device_id rockchip_typec_phy_dt_ids[];
> +

Why use a forward reference ? Just move the tables here.

> +static int rockchip_typec_phy_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_typec_phy *tcphy;
> +	struct resource *res;
> +	struct phy_provider *phy_provider;
> +	struct rockchip_usb3phy_port_cfg *cfg;
> +	int ret;
> +
> +	tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
> +	if (!tcphy)
> +		return -ENOMEM;
> +
> +	match = of_match_node(rockchip_typec_phy_dt_ids, dev->of_node);
> +	cfg = (struct rockchip_usb3phy_port_cfg *)match->data;

Unnecessary typecast (though you might need 'const struct
rockchip_usb3phy_port_cfg *').

> +
> +	tcphy->port_cfgs = cfg;
> +	tcphy->dev = dev;
> +	platform_set_drvdata(pdev, tcphy);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	tcphy->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(tcphy->base)) {
> +		dev_err(dev, "failed to remap phy regs\n");
> +		return PTR_ERR(tcphy->base);
> +	}
> +
> +	tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
> +							"rockchip,grf");
> +	if (IS_ERR(tcphy->grf_regs)) {
> +		dev_err(dev, "could not find grf dt node\n");
> +		return PTR_ERR(tcphy->grf_regs);
> +	}
> +
> +	tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
> +	if (IS_ERR(tcphy->clk_core)) {
> +		dev_err(dev, "could not get uphy core clock\n");
> +		return PTR_ERR(tcphy->clk_core);
> +	}
> +
> +	tcphy->clk_ref = devm_clk_get(dev, "tcpdphy_ref");
> +	if (IS_ERR(tcphy->clk_ref)) {
> +		dev_err(dev, "could not get uphy ref clock\n");
> +		return PTR_ERR(tcphy->clk_ref);
> +	}
> +
> +	tcphy->phy_rst = devm_reset_control_get(dev, "tcphy");
> +	if (IS_ERR(tcphy->phy_rst)) {
> +		dev_err(dev, "no phy_rst reset control found\n");
> +		return PTR_ERR(tcphy->phy_rst);
> +	}
> +
> +	tcphy->pipe_rst = devm_reset_control_get(dev, "tcphy_pipe");
> +	if (IS_ERR(tcphy->pipe_rst)) {
> +		dev_err(dev, "no pipe_rst reset control found\n");
> +		return PTR_ERR(tcphy->pipe_rst);
> +	}
> +
> +	tcphy->uphy_rst = devm_reset_control_get(dev, "uphy_tcphy");
> +	if (IS_ERR(tcphy->uphy_rst)) {
> +		dev_err(dev, "no uphy_rst reset control found\n");
> +		return PTR_ERR(tcphy->uphy_rst);
> +	}
> +
> +	tcphy->mode = MODE_DISCONNECT;
> +
> +	tcphy->phy = devm_phy_create(dev, NULL, &rockchip_tcphy_ops);
> +

What if this function returns an error ?

> +	phy_set_drvdata(tcphy->phy, tcphy);
> +
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> +	tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
> +	if (IS_ERR(tcphy->extcon)) {
> +		if (PTR_ERR(tcphy->extcon) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		dev_err(dev, "Invalid or missing extcon\n");
> +		return PTR_ERR(tcphy->extcon);

Better 
		if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
			dev_err(dev, "Invalid or missing extcon\n");
		return PTR_ERR(tcphy->extcon);

> +	}
> +
> +	tcphy->event_nb.notifier_call = tcphy_pd_event;
> +	INIT_DELAYED_WORK(&tcphy->event_wq, tcphy_event_wq);
> +	ret = extcon_register_notifier(tcphy->extcon, EXTCON_USB,
> +				       &tcphy->event_nb);
> +	if (ret) {
> +		dev_err(dev, "regitster notifer failed\n");
> +		return ret;
> +	}
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);

Why do you keep going above if the call to devm_of_phy_provider_register()
returned an error ? If the function returns an error, the extcon notifier
will still be registered and cause trouble.

> +}
> +
> +static int rockchip_typec_phy_remove(struct platform_device *pdev)
> +{
> +	struct rockchip_typec_phy *tcphy = platform_get_drvdata(pdev);
> +
> +	extcon_unregister_notifier(tcphy->extcon, EXTCON_USB,
> +				   &tcphy->event_nb);
> +
> +	return 0;
> +}
> +
> +static const struct rockchip_usb3phy_port_cfg rk3399_tcphy0 = {
> +	.port_id = 0,
> +	.typec_conn_dir = {0xe580, 0, 16, 1, 0},
> +	.usb3tousb2_en = {0xe580, 3, 19, 1, 0},
> +	.external_psm = {0xe588, 14, 30, 1, 0},
> +	.pipe_status = {0xe5c0, 0, 0, 1, 0},
> +	.dptx_hpd_sel = {0x6268, 12, 28, 3, 0},
> +	.uphy_dp_sel = {0x6268, 3, 19, 1, 0},
> +};
> +
> +static const struct rockchip_usb3phy_port_cfg rk3399_tcphy1 = {
> +	.port_id = 1,
> +	.typec_conn_dir = {0xe58c, 0, 16, 1, 0},
> +	.usb3tousb2_en = {0xe58c, 3, 19, 1, 0},
> +	.external_psm = {0xe594, 14, 30, 1, 0},
> +	.pipe_status = {0xe5c0, 16, 16, 1, 0},
> +	.dptx_hpd_sel = {0x6268, 12, 28, 3, 0},
> +	.uphy_dp_sel = {0x6268, 3, 19, 1, 0},
> +};
> +
> +static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
> +	{ .compatible = "rockchip,rk3399-typec-phy0", .data = &rk3399_tcphy0 },
> +	{ .compatible = "rockchip,rk3399-typec-phy1", .data = &rk3399_tcphy1 },

Better use <reg> or some other means to distinguish between phys.

> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
> +
> +static struct platform_driver rockchip_typec_phy_driver = {
> +	.probe		= rockchip_typec_phy_probe,
> +	.remove		= rockchip_typec_phy_remove,
> +	.driver		= {
> +		.name	= "rockchip-typec-phy",
> +		.of_match_table = rockchip_typec_phy_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(rockchip_typec_phy_driver);
> +
> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
> +MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
> +MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/phy/phy-rockchip-typec.h b/include/linux/phy/phy-rockchip-typec.h
> new file mode 100644
> index 0000000..acdd8cb
> --- /dev/null
> +++ b/include/linux/phy/phy-rockchip-typec.h
> @@ -0,0 +1,20 @@
> +#ifndef PHY_ROCKCHIP_TYPEC_H_
> +#define PHY_ROCKCHIP_TYPEC_H_
> +
> +#define PIN_MAP_A	BIT(0)
> +#define PIN_MAP_B	BIT(1)
> +#define PIN_MAP_C	BIT(2)
> +#define PIN_MAP_D	BIT(3)
> +#define PIN_MAP_E	BIT(4)
> +#define PIN_MAP_F	BIT(5)
> +
> +#define SET_PIN_MAP(x)	(((x) & 0xff) << 24)
> +#define SET_FLIP(x)	(((x) & 0xff) << 16)
> +#define SET_DFP(x)	(((x) & 0xff) << 8)
> +#define SET_PLUGGED(x)	((x) & 0xff)
> +#define GET_PIN_MAP(x)	(((x) >> 24) & 0xff)
> +#define GET_FLIP(x)	(((x) >> 16) & 0xff)
> +#define GET_DFP(x)	(((x) >> 8) & 0xff)
> +#define GET_PLUGGED(x)	((x) & 0xff)
> +
> +#endif
diff mbox

Patch

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..dc388a3d 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -351,6 +351,13 @@  config PHY_ROCKCHIP_DP
 	help
 	  Enable this to support the Rockchip Display Port PHY.
 
+config PHY_ROCKCHIP_TYPEC
+	tristate "Rockchip TYPEC PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip USB TYPEC PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..91fa413 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -39,6 +39,7 @@  obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
new file mode 100644
index 0000000..40be944
--- /dev/null
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -0,0 +1,942 @@ 
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ *         Kever Yang <kever.yang@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/delay.h>
+#include <linux/phy/phy-rockchip-typec.h>
+
+#define CMN_SSM_BANDGAP			(0x21 << 2)
+#define CMN_SSM_BIAS			(0x22 << 2)
+#define CMN_PLLSM0_PLLEN		(0x29 << 2)
+#define CMN_PLLSM0_PLLPRE		(0x2a << 2)
+#define CMN_PLLSM0_PLLVREF		(0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK		(0x2c << 2)
+#define CMN_PLLSM1_PLLEN		(0x31 << 2)
+#define CMN_PLLSM1_PLLPRE		(0x32 << 2)
+#define CMN_PLLSM1_PLLVREF		(0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK		(0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL	(0x37 << 2)
+#define CMN_ICAL_OVRD			(0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD		(0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT		(0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER		(0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START	(0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START	(0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR	(0x93 << 2)
+#define CMN_PLL0_INTDIV			(0x94 << 2)
+#define CMN_PLL0_FRACDIV		(0x95 << 2)
+#define CMN_PLL0_HIGH_THR		(0x96 << 2)
+#define CMN_PLL0_DSM_DIAG		(0x97 << 2)
+#define CMN_PLL0_SS_CTRL1		(0x98 << 2)
+#define CMN_PLL0_SS_CTRL2		(0x99 << 2)
+#define CMN_PLL1_VCOCAL_START		(0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD		(0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT		(0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER		(0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START	(0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START	(0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR	(0xb3 << 2)
+#define CMN_PLL1_INTDIV			(0xb4 << 2)
+#define CMN_PLL1_FRACDIV		(0xb5 << 2)
+#define CMN_PLL1_HIGH_THR		(0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG		(0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
+#define CMN_RXCAL_OVRD			(0xd1 << 2)
+#define CMN_TXPUCAL_CTRL		(0xe0 << 2)
+#define CMN_TXPUCAL_OVRD		(0xe1 << 2)
+#define CMN_TXPDCAL_OVRD		(0xf1 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE		(0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE		(0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG		(0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD		(0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD		(0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD		(0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE		(0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE		(0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG		(0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1	(0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2	(0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL	(0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL		(0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n)		((0x4001 | (n << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n)		((0x4002 | (n << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n)		((0x4003 | (n << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n)	((0x4047 | (n << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n)	((0x404c | (n << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n)	((0x404d | (n << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n)	((0x404e | (n << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n)	((0x404f | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n)	((0x4050 | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n)	((0x4051 | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n)	((0x4052 | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n)	((0x4053 | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n)	((0x4054 | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | (n << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | (n << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | (n << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | (n << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | (n << 9)) << 2)
+#define TX_PSC_A0(n)			((0x4100 | (n << 9)) << 2)
+#define TX_PSC_A1(n)			((0x4101 | (n << 9)) << 2)
+#define TX_PSC_A2(n)			((0x4102 | (n << 9)) << 2)
+#define TX_PSC_A3(n)			((0x4103 | (n << 9)) << 2)
+#define TX_RCVDET_CTRL(n)		((0x4120 | (n << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n)		((0x4122 | (n << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n)		((0x4123 | (n << 9)) << 2)
+#define TX_DIAG_TX_DRV(n)		((0x41e1 | (n << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+#define TX_ANA_CTRL_REG_1		(0x5020 << 2)
+#define TX_ANA_CTRL_REG_2		(0x5021 << 2)
+#define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
+#define TX_DIG_CTRL_REG_2		(0x5024 << 2)
+#define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
+#define TX_ANA_CTRL_REG_3		(0x5026 << 2)
+#define TX_ANA_CTRL_REG_4		(0x5027 << 2)
+#define TX_ANA_CTRL_REG_5		(0x5029 << 2)
+
+#define RX_PSC_A0(n)			((0x8000 | (n << 9)) << 2)
+#define RX_PSC_A1(n)			((0x8001 | (n << 9)) << 2)
+#define RX_PSC_A2(n)			((0x8002 | (n << 9)) << 2)
+#define RX_PSC_A3(n)			((0x8003 | (n << 9)) << 2)
+#define RX_PSC_CAL(n)			((0x8006 | (n << 9)) << 2)
+#define RX_PSC_RDY(n)			((0x8007 | (n << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD		(0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD		(0x8033 << 2)
+#define RX_SDCAL0_OVRD			(0x8041 << 2)
+#define RX_SDCAL1_OVRD			(0x8049 << 2)
+#define RX_SLC_INIT			(0x806d << 2)
+#define RX_SLC_RUN			(0x806e << 2)
+#define RX_CDRLF_CNFG2			(0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n)	((0x8090 | (n << 9)) << 2)
+#define RX_SLC_IOP0_OVRD		(0x8101 << 2)
+#define RX_SLC_IOP1_OVRD		(0x8105 << 2)
+#define RX_SLC_QOP0_OVRD		(0x8109 << 2)
+#define RX_SLC_QOP1_OVRD		(0x810d << 2)
+#define RX_SLC_EOP0_OVRD		(0x8111 << 2)
+#define RX_SLC_EOP1_OVRD		(0x8115 << 2)
+#define RX_SLC_ION0_OVRD		(0x8119 << 2)
+#define RX_SLC_ION1_OVRD		(0x811d << 2)
+#define RX_SLC_QON0_OVRD		(0x8121 << 2)
+#define RX_SLC_QON1_OVRD		(0x8125 << 2)
+#define RX_SLC_EON0_OVRD		(0x8129 << 2)
+#define RX_SLC_EON1_OVRD		(0x812d << 2)
+#define RX_SLC_IEP0_OVRD		(0x8131 << 2)
+#define RX_SLC_IEP1_OVRD		(0x8135 << 2)
+#define RX_SLC_QEP0_OVRD		(0x8139 << 2)
+#define RX_SLC_QEP1_OVRD		(0x813d << 2)
+#define RX_SLC_EEP0_OVRD		(0x8141 << 2)
+#define RX_SLC_EEP1_OVRD		(0x8145 << 2)
+#define RX_SLC_IEN0_OVRD		(0x8149 << 2)
+#define RX_SLC_IEN1_OVRD		(0x814d << 2)
+#define RX_SLC_QEN0_OVRD		(0x8151 << 2)
+#define RX_SLC_QEN1_OVRD		(0x8155 << 2)
+#define RX_SLC_EEN0_OVRD		(0x8159 << 2)
+#define RX_SLC_EEN1_OVRD		(0x815d << 2)
+#define RX_DIAG_SIGDET_TUNE(n)		((0x81dc | (n << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY		(0x81e1 << 2)
+
+#define PMA_LANE_CFG			(0xc000 << 2)
+#define PIPE_CMN_CTRL1			(0xc001 << 2)
+#define PIPE_CMN_CTRL2			(0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1		(0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2		(0xc004 << 2)
+#define PIPE_RCV_DET_INH		(0xc005 << 2)
+#define DP_MODE_CTL			(0xc008 << 2)
+#define DP_CLK_CTL			(0xc009 << 2)
+#define STS				(0xc00F << 2)
+#define PHY_ISO_CMN_CTRL		(0xc010 << 2)
+#define PHY_DP_TX_CTL			(0xc408 << 2)
+#define PMA_CMN_CTRL1			(0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL		(0xc810 << 2)
+#define PHY_ISOLATION_CTRL		(0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n)	((0xcc11 | (n << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n)	((0xcc12 | (n << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n)	((0xcc13 | (n << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n)	((0xcc14 | (n << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n)	((0xcc15 | (n << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n)	((0xcc16 | (n << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n)	((0xcc17 | (n << 6)) << 2)
+#define TX_BIST_CTRL(n)			((0x4140 | (n << 9)) << 2)
+#define TX_BIST_UDDWR(n)		((0x4141 | (n << 9)) << 2)
+
+#define DP_PLL_CLOCK_ENABLE		BIT(2)
+#define DP_PLL_ENABLE			BIT(0)
+#define DP_PLL_DATA_RATE_RBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2		((1 << 12) | (2 << 8))
+
+#define GRF_SOC_CON26			0x6268
+#define UPHY_DP_SEL			BIT(3)
+#define UPHY_DP_SEL_MASK		BIT(19)
+#define DPTX_HDP_SEL			(3 << 12)
+#define DPTX_HDP_SEL_MASK		(3 << 28)
+
+#define PHY_MODE_SET_TIMEOUT		1000000
+
+#define	MODE_DISCONNECT			0
+#define	MODE_UFP_USB			BIT(0)
+#define	MODE_DFP_USB			BIT(1)
+#define	MODE_DFP_DP			BIT(2)
+
+struct usb3phy_reg {
+	u32	offset;
+	u32	val_bit;
+	u32	write_enable;
+	u32	enable;
+	u32	disable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+	u32 port_id;
+	struct usb3phy_reg	typec_conn_dir;
+	struct usb3phy_reg	usb3tousb2_en;
+	struct usb3phy_reg	external_psm;
+	struct usb3phy_reg	pipe_status;
+	struct usb3phy_reg	dptx_hpd_sel;
+	struct usb3phy_reg	uphy_dp_sel;
+};
+
+struct rockchip_typec_phy {
+	struct device		*dev;
+	void __iomem		*base;
+	struct extcon_dev	*extcon;
+	struct phy		*phy;
+	struct regmap		*grf_regs;
+	struct clk		*clk_core;
+	struct clk		*clk_ref;
+	struct reset_control	*phy_rst;
+	struct reset_control	*pipe_rst;
+	struct reset_control	*uphy_rst;
+	const struct rockchip_usb3phy_port_cfg	*port_cfgs;
+
+	/* to receive notifier from PD */
+	struct notifier_block	event_nb;
+	struct delayed_work	event_wq;
+
+	bool flip;
+	int mode;
+	int map;
+};
+
+struct phy_reg {
+	int value;
+	int addr;
+};
+
+struct phy_reg usb_pll_cfg[] = {
+	{0xf0,		CMN_PLL0_VCOCAL_INIT},
+	{0x18,		CMN_PLL0_VCOCAL_ITER},
+	{0xd0,		CMN_PLL0_INTDIV},
+	{0x4a4a,	CMN_PLL0_FRACDIV},
+	{0x34,		CMN_PLL0_HIGH_THR},
+	{0x1ee,		CMN_PLL0_SS_CTRL1},
+	{0x7f03,	CMN_PLL0_SS_CTRL2},
+	{0x20,		CMN_PLL0_DSM_DIAG},
+	{0,		CMN_DIAG_PLL0_OVRD},
+	{0,		CMN_DIAG_PLL0_FBH_OVRD},
+	{0,		CMN_DIAG_PLL0_FBL_OVRD},
+	{0x7,		CMN_DIAG_PLL0_V2I_TUNE},
+	{0x45,		CMN_DIAG_PLL0_CP_TUNE},
+	{0x8,		CMN_DIAG_PLL0_LF_PROG},
+};
+
+struct phy_reg dp_pll_cfg[] = {
+	{0xf0,		CMN_PLL1_VCOCAL_INIT},
+	{0x18,		CMN_PLL1_VCOCAL_ITER},
+	{0x30b9,	CMN_PLL1_VCOCAL_START},
+	{0x21c,		CMN_PLL1_INTDIV},
+	{0,		CMN_PLL1_FRACDIV},
+	{0x5,		CMN_PLL1_HIGH_THR},
+	{0x35,		CMN_PLL1_SS_CTRL1},
+	{0x7f1e,	CMN_PLL1_SS_CTRL2},
+	{0x20,		CMN_PLL1_DSM_DIAG},
+	{0,		CMN_PLLSM1_USER_DEF_CTRL},
+	{0,		CMN_DIAG_PLL1_OVRD},
+	{0,		CMN_DIAG_PLL1_FBH_OVRD},
+	{0,		CMN_DIAG_PLL1_FBL_OVRD},
+	{0x6,		CMN_DIAG_PLL1_V2I_TUNE},
+	{0x45,		CMN_DIAG_PLL1_CP_TUNE},
+	{0x8,		CMN_DIAG_PLL1_LF_PROG},
+	{0x100,		CMN_DIAG_PLL1_PTATIS_TUNE1},
+	{0x7,		CMN_DIAG_PLL1_PTATIS_TUNE2},
+	{0x4,		CMN_DIAG_PLL1_INCLK_CTRL},
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy,
+			  u32 num_lanes)
+{
+	u32 i;
+
+	/*
+	 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+	 * cmn_psm_clk_dig_div = 2, set the clk division to 2
+	 */
+	writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+	for (i = 0; i < num_lanes; i++) {
+		/*
+		 * The following PHY configuration assumes a 24 MHz reference
+		 * clocks.
+		 */
+		writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+		writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+		writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+	}
+}
+
+static void tcphy_cfg_usb_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 rdata;
+	u32 i;
+
+	/*
+	 * Selects which PLL clock will be driven on the analog high speed
+	 * clock 0: PLL 0 div 1.
+	 */
+	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+	writel(rdata & 0xfffc, tcphy->base + CMN_DIAG_HSCLK_SEL);
+
+	/* load the configuration of PLL0 */
+	for (i = 0; i < ARRAY_SIZE(usb_pll_cfg); i++)
+		writel(usb_pll_cfg[i].value, tcphy->base + usb_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 rdata;
+	u32 i;
+
+	/* set the default mode to RBR */
+	writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+	       tcphy->base + DP_CLK_CTL);
+
+	/*
+	 * Selects which PLL clock will be driven on the analog high speed
+	 * clock 1: PLL 1 div 2.
+	 */
+	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+	rdata = (rdata & 0xffcf) | 0x30;
+	writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+
+	/* load the configuration of PLL1 */
+	for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+		writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb_cfg_lane(struct rockchip_typec_phy *tcphy,
+				  u32 lane)
+{
+	writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb_cfg_lane(struct rockchip_typec_phy *tcphy,
+				  u32 lane)
+{
+	writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+	writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+	writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+	writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+	writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+	writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+	writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+	writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+	writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy,
+			      u32 lane)
+{
+	u32 rdata;
+
+	writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+	writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x98, tcphy->base + TX_PSC_A2(lane));
+	writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+	writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+	writel(0x700, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+	rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+	rdata = (rdata & 0x8fff) | 0x6000;
+	writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static void tcphy_cfg_pin_assign(struct rockchip_typec_phy *tcphy)
+{
+	switch (tcphy->map) {
+	case PIN_MAP_A:
+		writel(0x19d5, tcphy->base + PMA_LANE_CFG);
+		break;
+	case PIN_MAP_B:
+		writel(0x1500, tcphy->base + PMA_LANE_CFG);
+		break;
+	case PIN_MAP_C:
+	case PIN_MAP_E:
+		writel(0x51d9, tcphy->base + PMA_LANE_CFG);
+		break;
+	case PIN_MAP_D:
+	case PIN_MAP_F:
+		writel(0x5100, tcphy->base + PMA_LANE_CFG);
+		break;
+	};
+}
+
+static void tcphy_cfg_lanes(struct rockchip_typec_phy *tcphy,
+			    u32 link_cfg)
+{
+	u32 i;
+
+	/* PMA lane configuration DP or USB3 */
+	for (i = 0; i < 4; i++) {
+		if ((link_cfg >> i) & 0x1) {
+			tcphy_dp_cfg_lane(tcphy, i);
+		} else {
+			/*
+			 * lan0 TX and lan1 RX for USB3 Normal direction
+			 * lan3 TX and lan2 RX for USB3 Flip direction
+			 */
+			if (i == 0 || i == 3)
+				tcphy_tx_usb_cfg_lane(tcphy, i);
+			else
+				tcphy_rx_usb_cfg_lane(tcphy, i);
+		}
+	}
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+				  const struct usb3phy_reg *reg, bool en)
+{
+	int mask = reg->enable << reg->write_enable;
+	int val = (en ? reg->enable : reg->disable) << reg->val_bit;
+
+	return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_cfg_flip_set(struct rockchip_typec_phy *tcphy)
+{
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+
+	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+	tcphy_cfg_24m(tcphy, 0x4);
+
+	if (tcphy->mode == MODE_UFP_USB ||
+	    (tcphy->mode & MODE_DFP_USB))
+		tcphy_cfg_usb_pll(tcphy);
+
+	if (tcphy->mode & MODE_DFP_DP)
+		tcphy_cfg_dp_pll(tcphy);
+
+	if (tcphy->mode == MODE_DFP_DP)
+		tcphy_cfg_lanes(tcphy, 0xf);
+	else if (tcphy->flip)
+		tcphy_cfg_lanes(tcphy, 0x3);
+	else
+		tcphy_cfg_lanes(tcphy, 0xc);
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+	int rdata, rdata2, val;
+
+	/* disable txda_cal_latch_en for rewrite the calibration values */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata & 0xdfff;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
+	 * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
+	 * works.
+	 */
+	rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	rdata = rdata & 0xffc0;
+
+	rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+	rdata2 = rdata2 & 0x3f;
+
+	val = rdata | rdata2;
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+	usleep_range(1000, 1050);
+
+	/*
+	 * Enable signal for latch that sample and holds calibration values.
+	 * Activate this signal for 1 clock cycle to sample new calibration
+	 * values.
+	 */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata | 0x2000;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+	usleep_range(150, 200);
+
+	/* set TX Voltage Level and TX Deemphasis to 0 */
+	writel(0, tcphy->base + PHY_DP_TX_CTL);
+	/* re-enable decap */
+	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+	 * voltage 16'h1001 for DP-AUX-TX and RX
+	 */
+	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* re-enables Bandgap reference for LDO */
+	writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * re-enables the transmitter pre-driver, driver data selection MUX,
+	 * and receiver detect circuits.
+	 */
+	writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	/*
+	 * Controls auxda_polarity, which selects the polarity of the xcvr
+	 * 1'b1 : Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+	 * down aux_m)
+	 * 1'b0 : Normal polarity (if TYPE_C, pulls up aux_m and pulls down
+	 * aux_p)
+	 */
+	if (tcphy->flip)
+		writel(0xa078, tcphy->base + TX_ANA_CTRL_REG_1);
+	else
+		writel(0xb078, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Controls low_power_swing_en, set the voltage swing of the driver
+	 * to 400mv. The values	below are peak to peak (differential) values.
+	 */
+	writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
+	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+	/* Controls tx_high_z_tm_en */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val |= BIT(15);
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static void tcphy_dp_hpd(struct rockchip_typec_phy *tcphy,
+			 u8 mode)
+{
+	/* force hpd */
+	if (mode)
+		regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
+			     DPTX_HDP_SEL_MASK | DPTX_HDP_SEL);
+	else
+		regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
+			     DPTX_HDP_SEL_MASK);
+}
+
+static int tcphy_usb3_init(struct rockchip_typec_phy *tcphy)
+{
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+	const struct usb3phy_reg *reg = &cfg->pipe_status;
+	int timeout = 0;
+	int val;
+
+	/* wait TCPHY for pipe ready */
+	while (1) {
+		regmap_read(tcphy->grf_regs, reg->offset, &val);
+		if (!(val & (reg->enable << reg->val_bit)))
+			break;
+
+		timeout++;
+		if (timeout > 1000) {
+			dev_err(tcphy->dev, "wait pipe ready timeout!\n");
+			return -EBUSY;
+		}
+		usleep_range(10, 20);
+	}
+
+	return 0;
+}
+
+static int tcphy_dp_init(struct rockchip_typec_phy *tcphy)
+{
+	int ret, val;
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & BIT(6), 1000, PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "failed to wait TCPHY for DP ready\n");
+		return -EBUSY;
+	}
+
+	tcphy_dp_aux_calibration(tcphy);
+
+	if (tcphy->mode & MODE_DFP_USB)
+		writel(0xc101, tcphy->base + DP_MODE_CTL);
+	else
+		writel(0x0101, tcphy->base + DP_MODE_CTL);
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & BIT(4), 1000, PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy)
+{
+	const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+
+	int timeout = 0;
+	int ret;
+
+	ret = clk_prepare_enable(tcphy->clk_core);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+		return ret;
+	}
+
+	ret = clk_set_rate(tcphy->clk_core, 50000000);
+	if (ret) {
+		dev_err(tcphy->dev, "set type-c phy core clk rate failed\n");
+		goto clk_ref_failed;
+	}
+
+	ret = clk_prepare_enable(tcphy->clk_ref);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+		goto clk_ref_failed;
+	}
+
+	/* select external psm clock */
+	property_enable(tcphy, &cfg->external_psm, 1);
+	property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+	reset_control_assert(tcphy->phy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+	reset_control_assert(tcphy->uphy_rst);
+
+	property_enable(tcphy, &cfg->uphy_dp_sel, cfg->port_id);
+
+	reset_control_deassert(tcphy->uphy_rst);
+
+	tcphy_cfg_flip_set(tcphy);
+
+	tcphy_cfg_pin_assign(tcphy);
+
+	if (tcphy->mode & MODE_DFP_DP) {
+		if (tcphy->mode & MODE_DFP_USB)
+			writel(0xc104, tcphy->base + DP_MODE_CTL);
+		else
+			writel(0x0104, tcphy->base + DP_MODE_CTL);
+	}
+
+	reset_control_deassert(tcphy->phy_rst);
+
+	while (!(readl(tcphy->base + PMA_CMN_CTRL1) & 1)) {
+		timeout++;
+		if (timeout > 1000) {
+			dev_err(tcphy->dev, "wait pma ready timeout!\n");
+			goto timeout_failed;
+		}
+		usleep_range(10, 20);
+	}
+
+	reset_control_deassert(tcphy->pipe_rst);
+
+	return ret;
+
+timeout_failed:
+	clk_disable_unprepare(tcphy->clk_core);
+clk_ref_failed:
+	clk_disable_unprepare(tcphy->clk_core);
+	return ret;
+}
+
+static int tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+	clk_disable_unprepare(tcphy->clk_core);
+	clk_disable_unprepare(tcphy->clk_ref);
+
+	return 0;
+}
+
+static int rockchip_typec_phy_power_on(struct phy *_phy)
+{
+	return 0;
+}
+
+static int rockchip_typec_phy_power_off(struct phy *_phy)
+{
+	return 0;
+}
+
+static const struct phy_ops rockchip_tcphy_ops = {
+	.power_on       = rockchip_typec_phy_power_on,
+	.power_off      = rockchip_typec_phy_power_off,
+	.owner          = THIS_MODULE,
+};
+
+static int tcphy_pd_event(struct notifier_block *nb,
+			  unsigned long event, void *priv)
+{
+	struct rockchip_typec_phy *tcphy;
+	struct extcon_dev *edev = (struct extcon_dev *)priv;
+	int value = edev->state;
+	int mode;
+	u8 is_plugged, dfp;
+
+	tcphy = container_of(nb, struct rockchip_typec_phy, event_nb);
+
+	is_plugged = GET_PLUGGED(value);
+	tcphy->flip = GET_FLIP(value);
+	dfp = GET_DFP(value);
+	tcphy->map = GET_PIN_MAP(value);
+
+	if (is_plugged) {
+		if (!dfp)
+			mode = MODE_UFP_USB;
+		else if (tcphy->map & (PIN_MAP_B | PIN_MAP_D | PIN_MAP_F))
+			mode = MODE_DFP_USB | MODE_DFP_DP;
+		else if (tcphy->map & (PIN_MAP_A | PIN_MAP_C | PIN_MAP_E))
+			mode = MODE_DFP_DP;
+		else
+			mode = MODE_DFP_USB;
+	} else {
+		mode = MODE_DISCONNECT;
+	}
+
+	if (tcphy->mode != mode) {
+		tcphy->mode = mode;
+		schedule_delayed_work_on(0, &tcphy->event_wq, 0);
+	}
+
+	return 0;
+}
+
+static void tcphy_event_wq(struct work_struct *work)
+{
+	struct rockchip_typec_phy *tcphy;
+
+	tcphy = container_of(work, struct rockchip_typec_phy, event_wq.work);
+
+	if (tcphy->mode == MODE_DISCONNECT) {
+		tcphy_phy_deinit(tcphy);
+		tcphy_dp_hpd(tcphy, 0);
+	} else {
+		tcphy_phy_init(tcphy);
+		if (tcphy->mode & (MODE_UFP_USB | MODE_DFP_USB))
+			tcphy_usb3_init(tcphy);
+
+		if (tcphy->mode & MODE_DFP_DP) {
+			tcphy_dp_init(tcphy);
+			tcphy_dp_hpd(tcphy, 1);
+		}
+	}
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[];
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	struct rockchip_typec_phy *tcphy;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	struct rockchip_usb3phy_port_cfg *cfg;
+	int ret;
+
+	tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+	if (!tcphy)
+		return -ENOMEM;
+
+	match = of_match_node(rockchip_typec_phy_dt_ids, dev->of_node);
+	cfg = (struct rockchip_usb3phy_port_cfg *)match->data;
+
+	tcphy->port_cfgs = cfg;
+	tcphy->dev = dev;
+	platform_set_drvdata(pdev, tcphy);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tcphy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(tcphy->base)) {
+		dev_err(dev, "failed to remap phy regs\n");
+		return PTR_ERR(tcphy->base);
+	}
+
+	tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+							"rockchip,grf");
+	if (IS_ERR(tcphy->grf_regs)) {
+		dev_err(dev, "could not find grf dt node\n");
+		return PTR_ERR(tcphy->grf_regs);
+	}
+
+	tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+	if (IS_ERR(tcphy->clk_core)) {
+		dev_err(dev, "could not get uphy core clock\n");
+		return PTR_ERR(tcphy->clk_core);
+	}
+
+	tcphy->clk_ref = devm_clk_get(dev, "tcpdphy_ref");
+	if (IS_ERR(tcphy->clk_ref)) {
+		dev_err(dev, "could not get uphy ref clock\n");
+		return PTR_ERR(tcphy->clk_ref);
+	}
+
+	tcphy->phy_rst = devm_reset_control_get(dev, "tcphy");
+	if (IS_ERR(tcphy->phy_rst)) {
+		dev_err(dev, "no phy_rst reset control found\n");
+		return PTR_ERR(tcphy->phy_rst);
+	}
+
+	tcphy->pipe_rst = devm_reset_control_get(dev, "tcphy_pipe");
+	if (IS_ERR(tcphy->pipe_rst)) {
+		dev_err(dev, "no pipe_rst reset control found\n");
+		return PTR_ERR(tcphy->pipe_rst);
+	}
+
+	tcphy->uphy_rst = devm_reset_control_get(dev, "uphy_tcphy");
+	if (IS_ERR(tcphy->uphy_rst)) {
+		dev_err(dev, "no uphy_rst reset control found\n");
+		return PTR_ERR(tcphy->uphy_rst);
+	}
+
+	tcphy->mode = MODE_DISCONNECT;
+
+	tcphy->phy = devm_phy_create(dev, NULL, &rockchip_tcphy_ops);
+
+	phy_set_drvdata(tcphy->phy, tcphy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (IS_ERR(tcphy->extcon)) {
+		if (PTR_ERR(tcphy->extcon) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(dev, "Invalid or missing extcon\n");
+		return PTR_ERR(tcphy->extcon);
+	}
+
+	tcphy->event_nb.notifier_call = tcphy_pd_event;
+	INIT_DELAYED_WORK(&tcphy->event_wq, tcphy_event_wq);
+	ret = extcon_register_notifier(tcphy->extcon, EXTCON_USB,
+				       &tcphy->event_nb);
+	if (ret) {
+		dev_err(dev, "regitster notifer failed\n");
+		return ret;
+	}
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int rockchip_typec_phy_remove(struct platform_device *pdev)
+{
+	struct rockchip_typec_phy *tcphy = platform_get_drvdata(pdev);
+
+	extcon_unregister_notifier(tcphy->extcon, EXTCON_USB,
+				   &tcphy->event_nb);
+
+	return 0;
+}
+
+static const struct rockchip_usb3phy_port_cfg rk3399_tcphy0 = {
+	.port_id = 0,
+	.typec_conn_dir = {0xe580, 0, 16, 1, 0},
+	.usb3tousb2_en = {0xe580, 3, 19, 1, 0},
+	.external_psm = {0xe588, 14, 30, 1, 0},
+	.pipe_status = {0xe5c0, 0, 0, 1, 0},
+	.dptx_hpd_sel = {0x6268, 12, 28, 3, 0},
+	.uphy_dp_sel = {0x6268, 3, 19, 1, 0},
+};
+
+static const struct rockchip_usb3phy_port_cfg rk3399_tcphy1 = {
+	.port_id = 1,
+	.typec_conn_dir = {0xe58c, 0, 16, 1, 0},
+	.usb3tousb2_en = {0xe58c, 3, 19, 1, 0},
+	.external_psm = {0xe594, 14, 30, 1, 0},
+	.pipe_status = {0xe5c0, 16, 16, 1, 0},
+	.dptx_hpd_sel = {0x6268, 12, 28, 3, 0},
+	.uphy_dp_sel = {0x6268, 3, 19, 1, 0},
+};
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3399-typec-phy0", .data = &rk3399_tcphy0 },
+	{ .compatible = "rockchip,rk3399-typec-phy1", .data = &rk3399_tcphy1 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+	.probe		= rockchip_typec_phy_probe,
+	.remove		= rockchip_typec_phy_remove,
+	.driver		= {
+		.name	= "rockchip-typec-phy",
+		.of_match_table = rockchip_typec_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/phy/phy-rockchip-typec.h b/include/linux/phy/phy-rockchip-typec.h
new file mode 100644
index 0000000..acdd8cb
--- /dev/null
+++ b/include/linux/phy/phy-rockchip-typec.h
@@ -0,0 +1,20 @@ 
+#ifndef PHY_ROCKCHIP_TYPEC_H_
+#define PHY_ROCKCHIP_TYPEC_H_
+
+#define PIN_MAP_A	BIT(0)
+#define PIN_MAP_B	BIT(1)
+#define PIN_MAP_C	BIT(2)
+#define PIN_MAP_D	BIT(3)
+#define PIN_MAP_E	BIT(4)
+#define PIN_MAP_F	BIT(5)
+
+#define SET_PIN_MAP(x)	(((x) & 0xff) << 24)
+#define SET_FLIP(x)	(((x) & 0xff) << 16)
+#define SET_DFP(x)	(((x) & 0xff) << 8)
+#define SET_PLUGGED(x)	((x) & 0xff)
+#define GET_PIN_MAP(x)	(((x) >> 24) & 0xff)
+#define GET_FLIP(x)	(((x) >> 16) & 0xff)
+#define GET_DFP(x)	(((x) >> 8) & 0xff)
+#define GET_PLUGGED(x)	((x) & 0xff)
+
+#endif