diff mbox

[08/11] Documentation: phy: Let the rockchip eMMC PHY get an exported card clock

Message ID 1465339484-969-9-git-send-email-dianders@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Doug Anderson June 7, 2016, 10:44 p.m. UTC
As of an earlier change in this series ("Documentation: mmc:
sdhci-of-arasan: Add ability to export card clock") the SDHCI driver
used on Rockchip SoCs can now expose its clock.  Let's now specify that
the PHY can use it.

Letting the PHY get access to this clock means it can adjust
phyctrl_frqsel field appropriately.  Although the Rockchip PHY appears
slightly different than the reference Arasan one, you can see that the
Arasan datasheet [1] had it defined as:
  Select the frequency range of DLL operation:
  3b'000 => 200MHz to 170 MHz
  3b'001 => 170MHz to 140 MHz
  3b'010 => 140MHz to 110 MHz
  3b'011 => 110MHz to 80MHz
  3b'100 => 80MHz to 50 MHz
  3b'101 => 275Mhz to 250MHz
  3b'110 => 250MHz to 225MHz
  3b'111 => 225MHz to 200MHz

On the Rockchip version of the PHY we have less granularity but the idea
is the same.

[1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
 Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Rob Herring (Arm) June 10, 2016, 1:36 p.m. UTC | #1
On Tue, Jun 07, 2016 at 03:44:41PM -0700, Douglas Anderson wrote:
> As of an earlier change in this series ("Documentation: mmc:
> sdhci-of-arasan: Add ability to export card clock") the SDHCI driver
> used on Rockchip SoCs can now expose its clock.  Let's now specify that
> the PHY can use it.
> 
> Letting the PHY get access to this clock means it can adjust
> phyctrl_frqsel field appropriately.  Although the Rockchip PHY appears
> slightly different than the reference Arasan one, you can see that the
> Arasan datasheet [1] had it defined as:
>   Select the frequency range of DLL operation:
>   3b'000 => 200MHz to 170 MHz
>   3b'001 => 170MHz to 140 MHz
>   3b'010 => 140MHz to 110 MHz
>   3b'011 => 110MHz to 80MHz
>   3b'100 => 80MHz to 50 MHz
>   3b'101 => 275Mhz to 250MHz
>   3b'110 => 250MHz to 225MHz
>   3b'111 => 225MHz to 200MHz
> 
> On the Rockchip version of the PHY we have less granularity but the idea
> is the same.
> 
> [1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
>  Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> index 555cb0f40690..fd118b071e5e 100644
> --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> @@ -7,6 +7,11 @@ Required properties:
>   - reg: PHY register address offset and length in "general
>     register files"
>  
> +Optional clocks (see ../clock/clock-bindings.txt), specified by name:
> + - emmcclk: The card clock exported by the SDHCI driver.  Although this is

This reads like emmcclk is the property. You need to list out clocks and 
clock-names.

> +	    listed as optional (because most boards can get basic functionality
> +	    without having access to it), it is strongly suggested.
> +
>  Example:
>  
>  
> @@ -20,6 +25,8 @@ grf: syscon@ff770000 {
>  	emmcphy: phy@f780 {
>  		compatible = "rockchip,rk3399-emmc-phy";
>  		reg = <0xf780 0x20>;
> +		clocks = <&sdhci>;
> +		clock-names = "emmcclk";
>  		#phy-cells = <0>;
>  	};
>  };
> -- 
> 2.8.0.rc3.226.g39d4020
>
Doug Anderson June 13, 2016, 11:05 p.m. UTC | #2
Rob,

On Fri, Jun 10, 2016 at 6:36 AM, Rob Herring <robh@kernel.org> wrote:
> On Tue, Jun 07, 2016 at 03:44:41PM -0700, Douglas Anderson wrote:
>> As of an earlier change in this series ("Documentation: mmc:
>> sdhci-of-arasan: Add ability to export card clock") the SDHCI driver
>> used on Rockchip SoCs can now expose its clock.  Let's now specify that
>> the PHY can use it.
>>
>> Letting the PHY get access to this clock means it can adjust
>> phyctrl_frqsel field appropriately.  Although the Rockchip PHY appears
>> slightly different than the reference Arasan one, you can see that the
>> Arasan datasheet [1] had it defined as:
>>   Select the frequency range of DLL operation:
>>   3b'000 => 200MHz to 170 MHz
>>   3b'001 => 170MHz to 140 MHz
>>   3b'010 => 140MHz to 110 MHz
>>   3b'011 => 110MHz to 80MHz
>>   3b'100 => 80MHz to 50 MHz
>>   3b'101 => 275Mhz to 250MHz
>>   3b'110 => 250MHz to 225MHz
>>   3b'111 => 225MHz to 200MHz
>>
>> On the Rockchip version of the PHY we have less granularity but the idea
>> is the same.
>>
>> [1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf
>>
>> Signed-off-by: Douglas Anderson <dianders@chromium.org>
>> ---
>>  Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
>> index 555cb0f40690..fd118b071e5e 100644
>> --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
>> @@ -7,6 +7,11 @@ Required properties:
>>   - reg: PHY register address offset and length in "general
>>     register files"
>>
>> +Optional clocks (see ../clock/clock-bindings.txt), specified by name:
>> + - emmcclk: The card clock exported by the SDHCI driver.  Although this is
>
> This reads like emmcclk is the property. You need to list out clocks and
> clock-names.

Thanks for the feedback.  Done.

-Doug
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 555cb0f40690..fd118b071e5e 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -7,6 +7,11 @@  Required properties:
  - reg: PHY register address offset and length in "general
    register files"
 
+Optional clocks (see ../clock/clock-bindings.txt), specified by name:
+ - emmcclk: The card clock exported by the SDHCI driver.  Although this is
+	    listed as optional (because most boards can get basic functionality
+	    without having access to it), it is strongly suggested.
+
 Example:
 
 
@@ -20,6 +25,8 @@  grf: syscon@ff770000 {
 	emmcphy: phy@f780 {
 		compatible = "rockchip,rk3399-emmc-phy";
 		reg = <0xf780 0x20>;
+		clocks = <&sdhci>;
+		clock-names = "emmcclk";
 		#phy-cells = <0>;
 	};
 };