@@ -1,6 +1,6 @@
b43-y += main.o
b43-y += bus.o
-b43-$(CONFIG_B43_PHY_G) += phy_a.o phy_g.o tables.o lo.o wa.o
+b43-$(CONFIG_B43_PHY_G) += phy_g.o tables.o lo.o wa.o
b43-$(CONFIG_B43_PHY_N) += tables_nphy.o
b43-$(CONFIG_B43_PHY_N) += radio_2055.o
b43-$(CONFIG_B43_PHY_N) += radio_2056.o
deleted file mode 100644
@@ -1,595 +0,0 @@
-/*
-
- Broadcom B43 wireless driver
- IEEE 802.11a PHY driver
-
- Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
- Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
- Copyright (c) 2005-2008 Michael Buesch <m@bues.ch>
- Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
- Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
- Boston, MA 02110-1301, USA.
-
-*/
-
-#include <linux/slab.h>
-
-#include "b43.h"
-#include "phy_a.h"
-#include "phy_common.h"
-#include "wa.h"
-#include "tables.h"
-#include "main.h"
-
-
-/* Get the freq, as it has to be written to the device. */
-static inline u16 channel2freq_a(u8 channel)
-{
- B43_WARN_ON(channel > 200);
-
- return (5000 + 5 * channel);
-}
-
-static inline u16 freq_r3A_value(u16 frequency)
-{
- u16 value;
-
- if (frequency < 5091)
- value = 0x0040;
- else if (frequency < 5321)
- value = 0x0000;
- else if (frequency < 5806)
- value = 0x0080;
- else
- value = 0x0040;
-
- return value;
-}
-
-#if 0
-/* This function converts a TSSI value to dBm in Q5.2 */
-static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_phy_a *aphy = phy->a;
- s8 dbm = 0;
- s32 tmp;
-
- tmp = (aphy->tgt_idle_tssi - aphy->cur_idle_tssi + tssi);
- tmp += 0x80;
- tmp = clamp_val(tmp, 0x00, 0xFF);
- dbm = aphy->tssi2dbm[tmp];
- //TODO: There's a FIXME on the specs
-
- return dbm;
-}
-#endif
-
-static void b43_radio_set_tx_iq(struct b43_wldev *dev)
-{
- static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 };
- static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A };
- u16 tmp = b43_radio_read16(dev, 0x001E);
- int i, j;
-
- for (i = 0; i < 5; i++) {
- for (j = 0; j < 5; j++) {
- if (tmp == (data_high[i] << 4 | data_low[j])) {
- b43_phy_write(dev, 0x0069,
- (i - j) << 8 | 0x00C0);
- return;
- }
- }
- }
-}
-
-static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel)
-{
- u16 freq, r8, tmp;
-
- freq = channel2freq_a(channel);
-
- r8 = b43_radio_read16(dev, 0x0008);
- b43_write16(dev, 0x03F0, freq);
- b43_radio_write16(dev, 0x0008, r8);
-
- //TODO: write max channel TX power? to Radio 0x2D
- tmp = b43_radio_read16(dev, 0x002E);
- tmp &= 0x0080;
- //TODO: OR tmp with the Power out estimation for this channel?
- b43_radio_write16(dev, 0x002E, tmp);
-
- if (freq >= 4920 && freq <= 5500) {
- /*
- * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F;
- * = (freq * 0.025862069
- */
- r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */
- }
- b43_radio_write16(dev, 0x0007, (r8 << 4) | r8);
- b43_radio_write16(dev, 0x0020, (r8 << 4) | r8);
- b43_radio_write16(dev, 0x0021, (r8 << 4) | r8);
- b43_radio_maskset(dev, 0x0022, 0x000F, (r8 << 4));
- b43_radio_write16(dev, 0x002A, (r8 << 4));
- b43_radio_write16(dev, 0x002B, (r8 << 4));
- b43_radio_maskset(dev, 0x0008, 0x00F0, (r8 << 4));
- b43_radio_maskset(dev, 0x0029, 0xFF0F, 0x00B0);
- b43_radio_write16(dev, 0x0035, 0x00AA);
- b43_radio_write16(dev, 0x0036, 0x0085);
- b43_radio_maskset(dev, 0x003A, 0xFF20, freq_r3A_value(freq));
- b43_radio_mask(dev, 0x003D, 0x00FF);
- b43_radio_maskset(dev, 0x0081, 0xFF7F, 0x0080);
- b43_radio_mask(dev, 0x0035, 0xFFEF);
- b43_radio_maskset(dev, 0x0035, 0xFFEF, 0x0010);
- b43_radio_set_tx_iq(dev);
- //TODO: TSSI2dbm workaround
-//FIXME b43_phy_xmitpower(dev);
-}
-
-static void b43_radio_init2060(struct b43_wldev *dev)
-{
- b43_radio_write16(dev, 0x0004, 0x00C0);
- b43_radio_write16(dev, 0x0005, 0x0008);
- b43_radio_write16(dev, 0x0009, 0x0040);
- b43_radio_write16(dev, 0x0005, 0x00AA);
- b43_radio_write16(dev, 0x0032, 0x008F);
- b43_radio_write16(dev, 0x0006, 0x008F);
- b43_radio_write16(dev, 0x0034, 0x008F);
- b43_radio_write16(dev, 0x002C, 0x0007);
- b43_radio_write16(dev, 0x0082, 0x0080);
- b43_radio_write16(dev, 0x0080, 0x0000);
- b43_radio_write16(dev, 0x003F, 0x00DA);
- b43_radio_mask(dev, 0x0005, ~0x0008);
- b43_radio_mask(dev, 0x0081, ~0x0010);
- b43_radio_mask(dev, 0x0081, ~0x0020);
- b43_radio_mask(dev, 0x0081, ~0x0020);
- msleep(1); /* delay 400usec */
-
- b43_radio_maskset(dev, 0x0081, ~0x0020, 0x0010);
- msleep(1); /* delay 400usec */
-
- b43_radio_maskset(dev, 0x0005, ~0x0008, 0x0008);
- b43_radio_mask(dev, 0x0085, ~0x0010);
- b43_radio_mask(dev, 0x0005, ~0x0008);
- b43_radio_mask(dev, 0x0081, ~0x0040);
- b43_radio_maskset(dev, 0x0081, ~0x0040, 0x0040);
- b43_radio_write16(dev, 0x0005,
- (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008);
- b43_phy_write(dev, 0x0063, 0xDDC6);
- b43_phy_write(dev, 0x0069, 0x07BE);
- b43_phy_write(dev, 0x006A, 0x0000);
-
- aphy_channel_switch(dev, dev->phy.ops->get_default_chan(dev));
-
- msleep(1);
-}
-
-static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable)
-{
- int i;
-
- if (dev->phy.rev < 3) {
- if (enable)
- for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) {
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8);
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, 0xFFF8);
- }
- else
- for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) {
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]);
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]);
- }
- } else {
- if (enable)
- for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++)
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, 0x0820);
- else
- for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++)
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]);
- }
-}
-
-static void b43_phy_ww(struct b43_wldev *dev)
-{
- u16 b, curr_s, best_s = 0xFFFF;
- int i;
-
- b43_phy_mask(dev, B43_PHY_CRS0, ~B43_PHY_CRS0_EN);
- b43_phy_set(dev, B43_PHY_OFDM(0x1B), 0x1000);
- b43_phy_maskset(dev, B43_PHY_OFDM(0x82), 0xF0FF, 0x0300);
- b43_radio_set(dev, 0x0009, 0x0080);
- b43_radio_maskset(dev, 0x0012, 0xFFFC, 0x0002);
- b43_wa_initgains(dev);
- b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5);
- b = b43_phy_read(dev, B43_PHY_PWRDOWN);
- b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005);
- b43_radio_set(dev, 0x0004, 0x0004);
- for (i = 0x10; i <= 0x20; i++) {
- b43_radio_write16(dev, 0x0013, i);
- curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF;
- if (!curr_s) {
- best_s = 0x0000;
- break;
- } else if (curr_s >= 0x0080)
- curr_s = 0x0100 - curr_s;
- if (curr_s < best_s)
- best_s = curr_s;
- }
- b43_phy_write(dev, B43_PHY_PWRDOWN, b);
- b43_radio_mask(dev, 0x0004, 0xFFFB);
- b43_radio_write16(dev, 0x0013, best_s);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC);
- b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80);
- b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00);
- b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0);
- b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0);
- b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF);
- b43_phy_maskset(dev, B43_PHY_OFDM(0xBB), 0xF000, 0x0053);
- b43_phy_maskset(dev, B43_PHY_OFDM61, 0xFE1F, 0x0120);
- b43_phy_maskset(dev, B43_PHY_OFDM(0x13), 0x0FFF, 0x3000);
- b43_phy_maskset(dev, B43_PHY_OFDM(0x14), 0x0FFF, 0x3000);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017);
- for (i = 0; i < 6; i++)
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013);
- b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030);
- b43_phy_set(dev, B43_PHY_CRS0, B43_PHY_CRS0_EN);
-}
-
-static void hardware_pctl_init_aphy(struct b43_wldev *dev)
-{
- //TODO
-}
-
-void b43_phy_inita(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
-
- /* This lowlevel A-PHY init is also called from G-PHY init.
- * So we must not access phy->a, if called from G-PHY code.
- */
- B43_WARN_ON((phy->type != B43_PHYTYPE_A) &&
- (phy->type != B43_PHYTYPE_G));
-
- might_sleep();
-
- if (phy->rev >= 6) {
- if (phy->type == B43_PHYTYPE_A)
- b43_phy_mask(dev, B43_PHY_OFDM(0x1B), ~0x1000);
- if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN)
- b43_phy_set(dev, B43_PHY_ENCORE, 0x0010);
- else
- b43_phy_mask(dev, B43_PHY_ENCORE, ~0x1010);
- }
-
- b43_wa_all(dev);
-
- if (phy->type == B43_PHYTYPE_A) {
- if (phy->gmode && (phy->rev < 3))
- b43_phy_set(dev, 0x0034, 0x0001);
- b43_phy_rssiagc(dev, 0);
-
- b43_phy_set(dev, B43_PHY_CRS0, B43_PHY_CRS0_EN);
-
- b43_radio_init2060(dev);
-
- if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) &&
- ((dev->dev->board_type == SSB_BOARD_BU4306) ||
- (dev->dev->board_type == SSB_BOARD_BU4309))) {
- ; //TODO: A PHY LO
- }
-
- if (phy->rev >= 3)
- b43_phy_ww(dev);
-
- hardware_pctl_init_aphy(dev);
-
- //TODO: radar detection
- }
-
- if ((phy->type == B43_PHYTYPE_G) &&
- (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)) {
- b43_phy_maskset(dev, B43_PHY_OFDM(0x6E), 0xE000, 0x3CF);
- }
-}
-
-/* Initialise the TSSI->dBm lookup table */
-static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_phy_a *aphy = phy->a;
- s16 pab0, pab1, pab2;
-
- pab0 = (s16) (dev->dev->bus_sprom->pa1b0);
- pab1 = (s16) (dev->dev->bus_sprom->pa1b1);
- pab2 = (s16) (dev->dev->bus_sprom->pa1b2);
-
- if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
- pab0 != -1 && pab1 != -1 && pab2 != -1) {
- /* The pabX values are set in SPROM. Use them. */
- if ((s8) dev->dev->bus_sprom->itssi_a != 0 &&
- (s8) dev->dev->bus_sprom->itssi_a != -1)
- aphy->tgt_idle_tssi =
- (s8) (dev->dev->bus_sprom->itssi_a);
- else
- aphy->tgt_idle_tssi = 62;
- aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
- pab1, pab2);
- if (!aphy->tssi2dbm)
- return -ENOMEM;
- } else {
- /* pabX values not set in SPROM,
- * but APHY needs a generated table. */
- aphy->tssi2dbm = NULL;
- b43err(dev->wl, "Could not generate tssi2dBm "
- "table (wrong SPROM info)!\n");
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int b43_aphy_op_allocate(struct b43_wldev *dev)
-{
- struct b43_phy_a *aphy;
- int err;
-
- aphy = kzalloc(sizeof(*aphy), GFP_KERNEL);
- if (!aphy)
- return -ENOMEM;
- dev->phy.a = aphy;
-
- err = b43_aphy_init_tssi2dbm_table(dev);
- if (err)
- goto err_free_aphy;
-
- return 0;
-
-err_free_aphy:
- kfree(aphy);
- dev->phy.a = NULL;
-
- return err;
-}
-
-static void b43_aphy_op_prepare_structs(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_phy_a *aphy = phy->a;
- const void *tssi2dbm;
- int tgt_idle_tssi;
-
- /* tssi2dbm table is constant, so it is initialized at alloc time.
- * Save a copy of the pointer. */
- tssi2dbm = aphy->tssi2dbm;
- tgt_idle_tssi = aphy->tgt_idle_tssi;
-
- /* Zero out the whole PHY structure. */
- memset(aphy, 0, sizeof(*aphy));
-
- aphy->tssi2dbm = tssi2dbm;
- aphy->tgt_idle_tssi = tgt_idle_tssi;
-
- //TODO init struct b43_phy_a
-
-}
-
-static void b43_aphy_op_free(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_phy_a *aphy = phy->a;
-
- kfree(aphy->tssi2dbm);
- aphy->tssi2dbm = NULL;
-
- kfree(aphy);
- dev->phy.a = NULL;
-}
-
-static int b43_aphy_op_init(struct b43_wldev *dev)
-{
- b43_phy_inita(dev);
-
- return 0;
-}
-
-static inline u16 adjust_phyreg(struct b43_wldev *dev, u16 offset)
-{
- /* OFDM registers are base-registers for the A-PHY. */
- if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) {
- offset &= ~B43_PHYROUTE;
- offset |= B43_PHYROUTE_BASE;
- }
-
-#if B43_DEBUG
- if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) {
- /* Ext-G registers are only available on G-PHYs */
- b43err(dev->wl, "Invalid EXT-G PHY access at "
- "0x%04X on A-PHY\n", offset);
- dump_stack();
- }
- if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) {
- /* N-BMODE registers are only available on N-PHYs */
- b43err(dev->wl, "Invalid N-BMODE PHY access at "
- "0x%04X on A-PHY\n", offset);
- dump_stack();
- }
-#endif /* B43_DEBUG */
-
- return offset;
-}
-
-static u16 b43_aphy_op_read(struct b43_wldev *dev, u16 reg)
-{
- reg = adjust_phyreg(dev, reg);
- b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
- return b43_read16(dev, B43_MMIO_PHY_DATA);
-}
-
-static void b43_aphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
-{
- reg = adjust_phyreg(dev, reg);
- b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
- b43_write16(dev, B43_MMIO_PHY_DATA, value);
-}
-
-static u16 b43_aphy_op_radio_read(struct b43_wldev *dev, u16 reg)
-{
- /* Register 1 is a 32-bit register. */
- B43_WARN_ON(reg == 1);
- /* A-PHY needs 0x40 for read access */
- reg |= 0x40;
-
- b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
- return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
-}
-
-static void b43_aphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
-{
- /* Register 1 is a 32-bit register. */
- B43_WARN_ON(reg == 1);
-
- b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
- b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
-}
-
-static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev)
-{
- return (dev->phy.rev >= 5);
-}
-
-static void b43_aphy_op_software_rfkill(struct b43_wldev *dev,
- bool blocked)
-{
- struct b43_phy *phy = &dev->phy;
-
- if (!blocked) {
- if (phy->radio_on)
- return;
- b43_radio_write16(dev, 0x0004, 0x00C0);
- b43_radio_write16(dev, 0x0005, 0x0008);
- b43_phy_mask(dev, 0x0010, 0xFFF7);
- b43_phy_mask(dev, 0x0011, 0xFFF7);
- b43_radio_init2060(dev);
- } else {
- b43_radio_write16(dev, 0x0004, 0x00FF);
- b43_radio_write16(dev, 0x0005, 0x00FB);
- b43_phy_set(dev, 0x0010, 0x0008);
- b43_phy_set(dev, 0x0011, 0x0008);
- }
-}
-
-static int b43_aphy_op_switch_channel(struct b43_wldev *dev,
- unsigned int new_channel)
-{
- if (new_channel > 200)
- return -EINVAL;
- aphy_channel_switch(dev, new_channel);
-
- return 0;
-}
-
-static unsigned int b43_aphy_op_get_default_chan(struct b43_wldev *dev)
-{
- return 36; /* Default to channel 36 */
-}
-
-static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
-{//TODO
- struct b43_phy *phy = &dev->phy;
- u16 tmp;
- int autodiv = 0;
-
- if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1)
- autodiv = 1;
-
- b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP);
-
- b43_phy_maskset(dev, B43_PHY_BBANDCFG, ~B43_PHY_BBANDCFG_RXANT,
- (autodiv ? B43_ANTENNA_AUTO1 : antenna) <<
- B43_PHY_BBANDCFG_RXANT_SHIFT);
-
- if (autodiv) {
- tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
- if (antenna == B43_ANTENNA_AUTO1)
- tmp &= ~B43_PHY_ANTDWELL_AUTODIV1;
- else
- tmp |= B43_PHY_ANTDWELL_AUTODIV1;
- b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
- }
- if (phy->rev < 3)
- b43_phy_maskset(dev, B43_PHY_ANTDWELL, 0xFF00, 0x24);
- else {
- b43_phy_set(dev, B43_PHY_OFDM61, 0x10);
- if (phy->rev == 3) {
- b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, 0x1D);
- b43_phy_write(dev, B43_PHY_ADIVRELATED, 8);
- } else {
- b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, 0x3A);
- b43_phy_maskset(dev, B43_PHY_ADIVRELATED, 0xFF00, 8);
- }
- }
-
- b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP);
-}
-
-static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev)
-{//TODO
-}
-
-static enum b43_txpwr_result b43_aphy_op_recalc_txpower(struct b43_wldev *dev,
- bool ignore_tssi)
-{//TODO
- return B43_TXPWR_RES_DONE;
-}
-
-static void b43_aphy_op_pwork_15sec(struct b43_wldev *dev)
-{//TODO
-}
-
-static void b43_aphy_op_pwork_60sec(struct b43_wldev *dev)
-{//TODO
-}
-
-static const struct b43_phy_operations b43_phyops_a = {
- .allocate = b43_aphy_op_allocate,
- .free = b43_aphy_op_free,
- .prepare_structs = b43_aphy_op_prepare_structs,
- .init = b43_aphy_op_init,
- .phy_read = b43_aphy_op_read,
- .phy_write = b43_aphy_op_write,
- .radio_read = b43_aphy_op_radio_read,
- .radio_write = b43_aphy_op_radio_write,
- .supports_hwpctl = b43_aphy_op_supports_hwpctl,
- .software_rfkill = b43_aphy_op_software_rfkill,
- .switch_analog = b43_phyop_switch_analog_generic,
- .switch_channel = b43_aphy_op_switch_channel,
- .get_default_chan = b43_aphy_op_get_default_chan,
- .set_rx_antenna = b43_aphy_op_set_rx_antenna,
- .recalc_txpower = b43_aphy_op_recalc_txpower,
- .adjust_txpower = b43_aphy_op_adjust_txpower,
- .pwork_15sec = b43_aphy_op_pwork_15sec,
- .pwork_60sec = b43_aphy_op_pwork_60sec,
-};
@@ -101,26 +101,4 @@ u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset);
void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
u16 offset, u32 value);
-
-struct b43_phy_a {
- /* Pointer to the table used to convert a
- * TSSI value to dBm-Q5.2 */
- const s8 *tssi2dbm;
- /* Target idle TSSI */
- int tgt_idle_tssi;
- /* Current idle TSSI */
- int cur_idle_tssi;//FIXME value currently not set
-
- /* A-PHY TX Power control value. */
- u16 txpwr_offset;
-
- //TODO lots of missing stuff
-};
-
-/**
- * b43_phy_inita - Lowlevel A-PHY init routine.
- * This is _only_ used by the G-PHY code.
- */
-void b43_phy_inita(struct b43_wldev *dev);
-
#endif /* LINUX_B43_PHY_A_H_ */
@@ -190,7 +190,6 @@ struct b43_phy_operations {
void (*pwork_60sec)(struct b43_wldev *dev);
};
-struct b43_phy_a;
struct b43_phy_g;
struct b43_phy_n;
struct b43_phy_lp;
@@ -210,8 +209,6 @@ struct b43_phy {
#else
union {
#endif
- /* A-PHY specific information */
- struct b43_phy_a *a;
/* G-PHY specific information */
struct b43_phy_g *g;
/* N-PHY specific information */
@@ -31,6 +31,7 @@
#include "phy_common.h"
#include "lo.h"
#include "main.h"
+#include "wa.h"
#include <linux/bitrev.h>
#include <linux/slab.h>
@@ -1987,6 +1988,25 @@ static void b43_phy_init_pctl(struct b43_wldev *dev)
b43_shm_clear_tssi(dev);
}
+static void b43_phy_inita(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+
+ might_sleep();
+
+ if (phy->rev >= 6) {
+ if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN)
+ b43_phy_set(dev, B43_PHY_ENCORE, 0x0010);
+ else
+ b43_phy_mask(dev, B43_PHY_ENCORE, ~0x1010);
+ }
+
+ b43_wa_all(dev);
+
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x6E), 0xE000, 0x3CF);
+}
+
static void b43_phy_initg(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
@@ -2150,11 +2170,6 @@ static void default_radio_attenuation(struct b43_wldev *dev,
}
}
- if (phy->type == B43_PHYTYPE_A) {
- rf->att = 0x60;
- return;
- }
-
switch (phy->radio_ver) {
case 0x2053:
switch (phy->radio_rev) {
gcc-6 reports the following error with -Werror=unused-const-variable. drivers/net/wireless/broadcom/b43/phy_a.c:576:40: error: 'b43_phyops_a' defined but not used Per Michael Büsch: "All a-phy code is usused", so remove it all, and move the remaining Type-G initialization code into phy_g.c. Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot] Cc: Michael Büsch <m@bues.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- v3: Do not rename b43_phy_inita() v2: Remove phy_a.c; move left-over code into phy_g.c Remove now unused data structure drivers/net/wireless/broadcom/b43/Makefile | 2 +- drivers/net/wireless/broadcom/b43/phy_a.c | 595 ------------------------- drivers/net/wireless/broadcom/b43/phy_a.h | 22 - drivers/net/wireless/broadcom/b43/phy_common.h | 3 - drivers/net/wireless/broadcom/b43/phy_g.c | 25 +- 5 files changed, 21 insertions(+), 626 deletions(-) delete mode 100644 drivers/net/wireless/broadcom/b43/phy_a.c