| Message ID | 1471329328-26842-1-git-send-email-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
Hi Chanwoo, Thanks for the patch and for squashing all contributions into one. I know that this removes individuals from authors but it makes development consistent. Of course I don't mind splitting things if they are sent separately following convention of "release early, release often". I have just few minor nits, nothing important. I'll review the boards a little bit later because of other taks. On 08/16/2016 08:35 AM, Chanwoo Choi wrote: > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports > PSCI (Power State Coordination Interface) v0.1. > > This patch includes following Device Tree node to support Exynos5433 SoC: > 1. Octa cores for big.LITTLE architecture > - Cortex-A53 LITTLE Quad-core > - Cortex-A57 big Quad-core > - Support PSCI v0.1 > > 2. Clock controller node > - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS > - CMU_CPIF : clocks for LLI (Low Latency Interface) > - CMU_MIF : clocks for DRAM Memory Controller > - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS > - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC > - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA > - CMU_G2D : clocks for G2D/MDMA > - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER > - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO > - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses > - CMU_G3D : clocks for 3D Graphics Engine > - CMU_GSCL : clocks for GSCALER > - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor. > - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor, > CoreSight and L2 cache controller. > - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs. > - CMU_MFC : clocks for MFC (Multi-Format Codec) IP. > - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP. > - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. > - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. > - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs. > > 3. pinctrl node for GPIO > - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad > > 4. Timer > - ARM architecture timer (armv8-timer) > - MCT (Multi Core Timer) timer > > 5. Interrupt controller (GIC-400) > > 6. BUS devices > - HS-I2C (High-Speed I2C) device > - SPI (Serial Peripheral Interface) device > > 7. Sound devices > - I2S bus > - LPASS (Low Power Audio Subsystem) > > 8. Power management devices > - CPUFREQ for for Cortex-A53/A57 > - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP > > 9. Display controller devices > - DECON (Display and enhancement controller) for panel output > - DSI (Display Serial Interface) > - MIC (Mobile Image Compressor) > - IOMMU for GSCL/DECON/TV/MFC/JPEG/FLITE/3AA/FIMC > > 10. USB > - USB 3.0 DRD (Dual Role Device) controller > - USB 3.0 Host controller > > 11. Storage devices > - MSHC (Mobile Stoarage Host Controller) > > 12. Misc devices > - UART device > - ADC (Analog Digital Converter) > - PWM (Pulse Width Modulation) > - ADMA (Advanced DMA) and PDMA (Peripheral DMA) > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> > Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> > Signed-off-by: Inki Dae <inki.dae@samsung.com> > Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Inha Song <ideal.song@samsung.com> > Signed-off-by: Ingi kim <ingi2.kim@samsung.com> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++ > .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 + > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 + > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 306 ++++ > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1580 ++++++++++++++++++++ > 5 files changed, 2725 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > new file mode 100644 > index 000000000000..2bf94face3f7 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > @@ -0,0 +1,794 @@ > +/* > + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * Chanwoo Choi <cw00.choi@samsung.com> > + * > + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device > + * tree nodes are listed in this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#define PIN_PULL_NONE 0 > +#define PIN_PULL_DOWN 1 > +#define PIN_PULL_UP 3 > + > +#define PIN_DRV_LV1 0 > +#define PIN_DRV_LV2 2 > +#define PIN_DRV_LV3 1 > +#define PIN_DRV_LV4 3 > + > +#define PIN_IN 0 > +#define PIN_OUT 1 > +#define PIN_FUNC1 2 > + > +#define PIN(_func, _pin, _pull, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = <PIN_ ##_func>; \ > + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ > + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ > + } > + > +&pinctrl_alive { > + gpa0: gpa0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + interrupt-parent = <&gic>; > + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, > + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; > + #interrupt-cells = <2>; > + }; > + > + gpa1: gpa1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + interrupt-parent = <&gic>; > + interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, > + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; > + #interrupt-cells = <2>; > + }; > + > + gpa2: gpa2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpa3: gpa3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf1: gpf1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf2: gpf2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf3: gpf3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf4: gpf4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf5: gpf5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_aud { > + gpz0: gpz0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpz1: gpz1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + i2s0_bus: i2s0-bus { > + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", > + "gpz0-4", "gpz0-5", "gpz0-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + pcm0_bus: pcm0-bus { > + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + uart_aud_bus: uart-aud-bus { > + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_cpif { > + gpv6: gpv6 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_ese { > + gpj2: gpj2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_finger { > + gpd5: gpd5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + spi2_bus: spi2-bus { > + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c6_bus: hs-i2c6-bus { > + samsung,pins = "gpd5-3", "gpd5-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + Unnecessary blank line. > +}; > + > +&pinctrl_fsys { > + gph1: gph1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr4: gpr4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr0: gpr0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr1: gpr1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr2: gpr2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr3: gpr3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + sd0_clk: sd0-clk { > + samsung,pins = "gpr0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_cmd: sd0-cmd { > + samsung,pins = "gpr0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_rdqs: sd0-rdqs { > + samsung,pins = "gpr0-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_qrdy: sd0-qrdy { > + samsung,pins = "gpr0-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus1: sd0-bus-width1 { > + samsung,pins = "gpr1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus4: sd0-bus-width4 { > + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus8: sd0-bus-width8 { > + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_clk: sd1-clk { > + samsung,pins = "gpr2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_cmd: sd1-cmd { > + samsung,pins = "gpr2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus1: sd1-bus-width1 { > + samsung,pins = "gpr3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus4: sd1-bus-width4 { > + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus8: sd1-bus-width8 { > + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + pcie_bus: pcie_bus { > + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + }; > + > + sd2_clk: sd2-clk { > + samsung,pins = "gpr4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cmd: sd2-cmd { > + samsung,pins = "gpr4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cd: sd2-cd { > + samsung,pins = "gpr4-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus1: sd2-bus-width1 { > + samsung,pins = "gpr4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus4: sd2-bus-width4 { > + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_clk_output: sd2-clk-output { > + samsung,pins = "gpr4-0"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <2>; > + }; > + > + sd2_cmd_output: sd2-cmd-output { > + samsung,pins = "gpr4-1"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <2>; > + }; > +}; > + > +&pinctrl_imem { > + gpf0: gpf0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_nfc { > + gpj0: gpj0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c4_bus: hs-i2c4-bus { > + samsung,pins = "gpj0-1", "gpj0-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + Ditto > +}; > + > +&pinctrl_peric { > + gpv7: gpv7 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb0: gpb0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc0: gpc0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc1: gpc1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc2: gpc2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc3: gpc3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg0: gpg0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd0: gpd0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd1: gpd1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd2: gpd2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd4: gpd4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd8: gpd8 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd6: gpd6 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd7: gpd7 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg1: gpg1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg2: gpg2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg3: gpg3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c8_bus: hs-i2c8-bus { > + samsung,pins = "gpb0-1", "gpb0-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c9_bus: hs-i2c9-bus { > + samsung,pins = "gpb0-3", "gpb0-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + i2s1_bus: i2s1-bus { > + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", > + "gpd4-3", "gpd4-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + pcm1_bus: pcm1-bus { > + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", > + "gpd4-3", "gpd4-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + spdif_bus: spdif-bus { > + samsung,pins = "gpd4-3", "gpd4-4"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_spi_pin0: fimc-is-spi-pin0 { > + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_spi_pin1: fimc-is-spi-pin1 { > + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + uart0_bus: uart0-bus { > + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + hs_i2c2_bus: hs-i2c2-bus { > + samsung,pins = "gpd0-3", "gpd0-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + uart2_bus: uart2-bus { > + samsung,pins = "gpd1-5", "gpd1-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + uart1_bus: uart1-bus { > + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + hs_i2c3_bus: hs-i2c3-bus { > + samsung,pins = "gpd1-3", "gpd1-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + Ditto > + > + hs_i2c0_bus: hs-i2c0-bus { > + samsung,pins = "gpd2-1", "gpd2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c1_bus: hs-i2c1-bus { > + samsung,pins = "gpd2-3", "gpd2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + pwm0_out: pwm0-out { > + samsung,pins = "gpd2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm1_out: pwm1-out { > + samsung,pins = "gpd2-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm2_out: pwm2-out { > + samsung,pins = "gpd2-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm3_out: pwm3-out { > + samsung,pins = "gpd2-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + spi1_bus: spi1-bus { > + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c7_bus: hs-i2c7-bus { > + samsung,pins = "gpd2-7", "gpd2-6"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi0_bus: spi0-bus { > + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c10_bus: hs-i2c10-bus { > + samsung,pins = "gpg3-1", "gpg3-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c11_bus: hs-i2c11-bus { > + samsung,pins = "gpg3-3", "gpg3-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi3_bus: spi3-bus { > + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi4_bus: spi4-bus { > + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_uart: fimc-is-uart { > + samsung,pins = "gpc1-1", "gpc0-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch0_i2c: fimc-is-ch0_i2c { > + samsung,pins = "gpc2-1", "gpc2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch0_mclk: fimc-is-ch0_mclk { > + samsung,pins = "gpd7-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch1_i2c: fimc-is-ch1-i2c { > + samsung,pins = "gpc2-3", "gpc2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch1_mclk: fimc-is-ch1-mclk { > + samsung,pins = "gpd7-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch2_i2c: fimc-is-ch2-i2c { > + samsung,pins = "gpc2-5", "gpc2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch2_mclk: fimc-is-ch2-mclk { > + samsung,pins = "gpd7-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_touch { > + gpj1: gpj1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c5_bus: hs-i2c5-bus { > + samsung,pins = "gpj1-1", "gpj1-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; (...) > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > new file mode 100644 > index 000000000000..175121db367e > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > @@ -0,0 +1,306 @@ > +/* > + * Device tree sources for Exynos5433 thermal zone > + * > + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <dt-bindings/thermal/thermal.h> > + > +/ { > +thermal-zones { > + atlas0_thermal: atlas0-thermal { > + thermal-sensors = <&tmu_atlas0>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + atlas0_alert_0: atlas0-alert-0 { > + temperature = <50000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_1: atlas0-alert-1 { > + temperature = <55000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_2: atlas0-alert-2 { > + temperature = <60000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_3: atlas0-alert-3 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_4: atlas0-alert-4 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_5: atlas0-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_6: atlas0-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; No critical trip? I think it might be useful to shutdown the system in a user-friendly way. > + }; > + > + cooling-maps { > + map0 { > + /* Set maximum frequency as 1800MHz */ > + trip = <&atlas0_alert_0>; > + cooling-device = <&cpu4 1 1>; Out of curiosity: why choosing specific cooling level (so quite fast the device will slow down) instead of letting cooling framework to decide how much to cool? Any particular reason behind this? > + }; > + map1 { > + /* Set maximum frequency as 1700MHz */ > + trip = <&atlas0_alert_1>; > + cooling-device = <&cpu4 2 2>; > + }; > + map2 { > + /* Set maximum frequency as 1600MHz */ > + trip = <&atlas0_alert_2>; > + cooling-device = <&cpu4 3 3>; > + }; > + map3 { > + /* Set maximum frequency as 1500MHz */ > + trip = <&atlas0_alert_3>; > + cooling-device = <&cpu4 4 4>; > + }; > + map4 { > + /* Set maximum frequency as 1400MHz */ > + trip = <&atlas0_alert_4>; > + cooling-device = <&cpu4 5 5>; > + }; > + map5 { > + /* Set maximum frequencyas 1200MHz */ > + trip = <&atlas0_alert_5>; > + cooling-device = <&cpu4 7 7>; > + }; > + map6 { > + /* Set maximum frequency as 800MHz */ > + trip = <&atlas0_alert_6>; > + cooling-device = <&cpu4 11 11>; > + }; > + }; > + }; > + > + atlas1_thermal: atlas1-thermal { > + thermal-sensors = <&tmu_atlas1>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + atlas1_alert_0: atlas1-alert-0 { > + temperature = <50000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_1: atlas1-alert-1 { > + temperature = <55000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_2: atlas1-alert-2 { > + temperature = <60000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_3: atlas1-alert-3 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_4: atlas1-alert-4 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_5: atlas1-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_6: atlas1-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; Same, critical trip point? > + }; > + }; > + > + g3d_thermal: g3d-thermal { > + thermal-sensors = <&tmu_g3d>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + g3d_alert_0: g3d-alert-0 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_1: g3d-alert-1 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_2: g3d-alert-2 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_3: g3d-alert-3 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_4: g3d-alert-4 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_5: g3d-alert-5 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_6: g3d-alert-6 { > + temperature = <100000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > + > + apollo_thermal: apollo-thermal { > + thermal-sensors = <&tmu_apollo>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + apollo_alert_0: apollo-alert-0 { > + temperature = <50000>; /* millicelsius */ > + hysteresis = <10000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_1: apollo-alert-1 { > + temperature = <55000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_2: apollo-alert-2 { > + temperature = <60000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_3: apollo-alert-3 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_4: apollo-alert-4 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_5: apollo-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_6: apollo-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + > + cooling-maps { > + map0 { > + /* Set maximum frequency as 1200MHz */ > + trip = <&apollo_alert_0>; > + cooling-device = <&cpu0 1 1>; > + }; > + map1 { > + /* Set maximum frequency as 1100MHz */ > + trip = <&apollo_alert_1>; > + cooling-device = <&cpu0 2 2>; > + }; > + map2 { > + /* Set maximum frequency as 1000MHz */ > + trip = <&apollo_alert_2>; > + cooling-device = <&cpu0 3 3>; > + }; > + map3 { > + /* Set maximum frequency as 900MHz */ > + trip = <&apollo_alert_3>; > + cooling-device = <&cpu0 4 4>; > + }; > + map4 { > + /* Set maximum frequency as 800MHz */ > + trip = <&apollo_alert_4>; > + cooling-device = <&cpu0 5 5>; > + }; > + map5 { > + /* Set maximum frequency as 700MHz */ > + trip = <&apollo_alert_5>; > + cooling-device = <&cpu0 6 6>; > + }; > + map6 { > + /* Set maximum frequency as 500MHz */ > + trip = <&apollo_alert_6>; > + cooling-device = <&cpu0 8 8>; > + }; > + }; > + }; > + > + isp_thermal: isp-thermal { > + thermal-sensors = <&tmu_isp>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + isp_alert_0: isp-alert-0 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_1: isp-alert-1 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_2: isp-alert-2 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_3: isp-alert-3 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_4: isp-alert-4 { > + temperature = <100000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_5: isp-alert-5 { > + temperature = <105000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_6: isp-alert-6 { > + temperature = <110000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > +}; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > new file mode 100644 > index 000000000000..2a5b05744533 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -0,0 +1,1580 @@ > +/* > + * Samsung's Exynos5433 SoC device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * > + * Samsung's Exynos5433 SoC device nodes are listed in this file. > + * Exynos5433 based board files can include this file and provide > + * values for board specific bindings. > + * > + * Note: This file does not include device nodes for all the controllers in > + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, > + * additional nodes can be added to this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <dt-bindings/clock/exynos5433.h> > + > +/ { > + compatible = "samsung,exynos5433"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + interrupt-parent = <&gic>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x100>; > + clock-frequency = <1300000000>; > + clocks = <&cmu_apollo CLK_SCLK_APOLLO>; > + clock-names = "apolloclk"; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu1: cpu@101 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x101>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu2: cpu@102 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x102>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu3: cpu@103 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x103>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu4: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0>; > + clock-frequency = <1900000000>; > + clocks = <&cmu_atlas CLK_SCLK_ATLAS>; > + clock-names = "atlasclk"; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu5: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x1>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu6: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x2>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu7: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x3>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + }; > + > + cluster_a53_opp_table: opp_table0 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp@400000000 { > + opp-hz = /bits/ 64 <400000000>; > + opp-microvolt = <900000>; > + }; > + opp@500000000 { > + opp-hz = /bits/ 64 <500000000>; > + opp-microvolt = <925000>; > + }; > + opp@600000000 { > + opp-hz = /bits/ 64 <600000000>; > + opp-microvolt = <950000>; > + }; > + opp@700000000 { > + opp-hz = /bits/ 64 <700000000>; > + opp-microvolt = <975000>; > + }; > + opp@800000000 { > + opp-hz = /bits/ 64 <800000000>; > + opp-microvolt = <1000000>; > + }; > + opp@900000000 { > + opp-hz = /bits/ 64 <900000000>; > + opp-microvolt = <1050000>; > + }; > + opp@1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <1075000>; > + }; > + opp@1100000000 { > + opp-hz = /bits/ 64 <1100000000>; > + opp-microvolt = <1112500>; > + }; > + opp@1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <1112500>; > + }; > + opp@1300000000 { > + opp-hz = /bits/ 64 <1300000000>; > + opp-microvolt = <1150000>; > + }; > + }; > + > + cluster_a57_opp_table: opp_table1 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp@500000000 { > + opp-hz = /bits/ 64 <500000000>; > + opp-microvolt = <900000>; > + }; > + opp@600000000 { > + opp-hz = /bits/ 64 <600000000>; > + opp-microvolt = <900000>; > + }; > + opp@700000000 { > + opp-hz = /bits/ 64 <700000000>; > + opp-microvolt = <912500>; > + }; > + opp@800000000 { > + opp-hz = /bits/ 64 <800000000>; > + opp-microvolt = <912500>; > + }; > + opp@900000000 { > + opp-hz = /bits/ 64 <900000000>; > + opp-microvolt = <937500>; > + }; > + opp@1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <975000>; > + }; > + opp@1100000000 { > + opp-hz = /bits/ 64 <1100000000>; > + opp-microvolt = <1012500>; > + }; > + opp@1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <1037500>; > + }; > + opp@1300000000 { > + opp-hz = /bits/ 64 <1300000000>; > + opp-microvolt = <1062500>; > + }; > + opp@1400000000 { > + opp-hz = /bits/ 64 <1400000000>; > + opp-microvolt = <1087500>; > + }; > + opp@1500000000 { > + opp-hz = /bits/ 64 <1500000000>; > + opp-microvolt = <1125000>; > + }; > + opp@1600000000 { > + opp-hz = /bits/ 64 <1600000000>; > + opp-microvolt = <1137500>; > + }; > + opp@1700000000 { > + opp-hz = /bits/ 64 <1700000000>; > + opp-microvolt = <1175000>; > + }; > + opp@1800000000 { > + opp-hz = /bits/ 64 <1800000000>; > + opp-microvolt = <1212500>; > + }; > + opp@1900000000 { > + opp-hz = /bits/ 64 <1900000000>; > + opp-microvolt = <1262500>; > + }; > + }; > + > + psci { > + compatible = "arm,psci"; > + method = "smc"; > + cpu_off = <0x84000002>; > + cpu_on = <0xC4000003>; > + }; > + > + reboot: syscon-reboot { > + compatible = "syscon-reboot"; > + regmap = <&pmu_system_controller>; > + offset = <0x400>; > + mask = <0x1>; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x0 0x18000000>; > + > + chipid@10000000 { > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > + }; > + > + xxti: xxti { > + compatible = "fixed-clock"; > + clock-output-names = "oscclk"; > + #clock-cells = <0>; > + }; > + > + cmu_top: clock-controller@10030000 { > + compatible = "samsung,exynos5433-cmu-top"; > + reg = <0x10030000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_mphy_pll", > + "sclk_mfc_pll", > + "sclk_bus_pll"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_MPHY_PLL>, > + <&cmu_mif CLK_SCLK_MFC_PLL>, > + <&cmu_mif CLK_SCLK_BUS_PLL>; > + }; > + > + cmu_cpif: clock-controller@10fc0000 { > + compatible = "samsung,exynos5433-cmu-cpif"; > + reg = <0x10fc0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk"; > + clocks = <&xxti>; > + }; > + > + cmu_mif: clock-controller@105b0000 { > + compatible = "samsung,exynos5433-cmu-mif"; > + reg = <0x105b0000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_mphy_pll"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_MPHY_PLL>; Are these lines aligned? It looks not but maybe this is just my mail client. Also it looks that spaces are used for clocks property but not for clock-names. > + }; > + > + cmu_peric: clock-controller@14c80000 { > + compatible = "samsung,exynos5433-cmu-peric"; > + reg = <0x14c80000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_peris: clock-controller@0x10040000 { > + compatible = "samsung,exynos5433-cmu-peris"; > + reg = <0x10040000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_fsys: clock-controller@156e0000 { > + compatible = "samsung,exynos5433-cmu-fsys"; > + reg = <0x156e0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_ufs_mphy", > + "div_aclk_fsys_200", > + "sclk_pcie_100_fsys", > + "sclk_ufsunipro_fsys", > + "sclk_mmc2_fsys", > + "sclk_mmc1_fsys", > + "sclk_mmc0_fsys", > + "sclk_usbhost30_fsys", > + "sclk_usbdrd30_fsys"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_UFS_MPHY>, > + <&cmu_top CLK_DIV_ACLK_FSYS_200>, > + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, > + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, > + <&cmu_top CLK_SCLK_MMC2_FSYS>, > + <&cmu_top CLK_SCLK_MMC1_FSYS>, > + <&cmu_top CLK_SCLK_MMC0_FSYS>, > + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; Indentation looks like mixing spaces and tabs (or is it just my mail program?). > + }; > + > + cmu_g2d: clock-controller@12460000 { > + compatible = "samsung,exynos5433-cmu-g2d"; > + reg = <0x12460000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_g2d_266", > + "aclk_g2d_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_G2D_266>, > + <&cmu_top CLK_ACLK_G2D_400>; > + }; > + > + cmu_disp: clock-controller@13b90000 { > + compatible = "samsung,exynos5433-cmu-disp"; > + reg = <0x13b90000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_dsim1_disp", > + "sclk_dsim0_disp", > + "sclk_dsd_disp", > + "sclk_decon_tv_eclk_disp", > + "sclk_decon_vclk_disp", > + "sclk_decon_eclk_disp", > + "sclk_decon_tv_vclk_disp", > + "aclk_disp_333"; > + clocks = <&xxti>, > + <&cmu_mif CLK_SCLK_DSIM1_DISP>, > + <&cmu_mif CLK_SCLK_DSIM0_DISP>, > + <&cmu_mif CLK_SCLK_DSD_DISP>, > + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, > + <&cmu_mif CLK_ACLK_DISP_333>; ditto > + }; > + > + cmu_aud: clock-controller@114c0000 { > + compatible = "samsung,exynos5433-cmu-aud"; > + reg = <0x114c0000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_bus0: clock-controller@13600000 { > + compatible = "samsung,exynos5433-cmu-bus0"; > + reg = <0x13600000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "aclk_bus0_400"; > + clocks = <&cmu_top CLK_ACLK_BUS0_400>; > + }; > + > + cmu_bus1: clock-controller@14800000 { > + compatible = "samsung,exynos5433-cmu-bus1"; > + reg = <0x14800000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "aclk_bus1_400"; > + clocks = <&cmu_top CLK_ACLK_BUS1_400>; > + }; > + > + cmu_bus2: clock-controller@13400000 { > + compatible = "samsung,exynos5433-cmu-bus2"; > + reg = <0x13400000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_bus2_400"; > + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; > + }; > + > + cmu_g3d: clock-controller@14aa0000 { > + compatible = "samsung,exynos5433-cmu-g3d"; > + reg = <0x14aa0000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_g3d_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; > + }; > + > + cmu_gscl: clock-controller@13cf0000 { > + compatible = "samsung,exynos5433-cmu-gscl"; > + reg = <0x13cf0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_gscl_111", > + "aclk_gscl_333"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_GSCL_111>, > + <&cmu_top CLK_ACLK_GSCL_333>; > + }; > + > + cmu_apollo: clock-controller@11900000 { > + compatible = "samsung,exynos5433-cmu-apollo"; > + reg = <0x11900000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "sclk_bus_pll_apollo"; > + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; > + }; > + > + cmu_atlas: clock-controller@11800000 { > + compatible = "samsung,exynos5433-cmu-atlas"; > + reg = <0x11800000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "sclk_bus_pll_atlas"; > + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; > + }; > + > + cmu_mscl: clock-controller@105d0000 { > + compatible = "samsung,exynos5433-cmu-mscl"; > + reg = <0x150d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_jpeg_mscl", > + "aclk_mscl_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_SCLK_JPEG_MSCL>, > + <&cmu_top CLK_ACLK_MSCL_400>; ditto > + }; > + > + cmu_mfc: clock-controller@15280000 { > + compatible = "samsung,exynos5433-cmu-mfc"; > + reg = <0x15280000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_mfc_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; > + }; > + > + cmu_hevc: clock-controller@14f80000 { > + compatible = "samsung,exynos5433-cmu-hevc"; > + reg = <0x14f80000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_hevc_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; > + }; > + > + cmu_isp: clock-controller@146d0000 { > + compatible = "samsung,exynos5433-cmu-isp"; > + reg = <0x146d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_isp_dis_400", > + "aclk_isp_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_ISP_DIS_400>, > + <&cmu_top CLK_ACLK_ISP_400>; ditto > + }; > + > + cmu_cam0: clock-controller@120d0000 { > + compatible = "samsung,exynos5433-cmu-cam0"; > + reg = <0x120d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_cam0_333", > + "aclk_cam0_400", > + "aclk_cam0_552"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_CAM0_333>, > + <&cmu_top CLK_ACLK_CAM0_400>, > + <&cmu_top CLK_ACLK_CAM0_552>; ditto > + }; > + > + cmu_cam1: clock-controller@145d0000 { > + compatible = "samsung,exynos5433-cmu-cam1"; > + reg = <0x145d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_isp_uart_cam1", > + "sclk_isp_spi1_cam1", > + "sclk_isp_spi0_cam1", > + "aclk_cam1_333", > + "aclk_cam1_400", > + "aclk_cam1_552"; > + clocks = <&xxti>, > + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, > + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, > + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, > + <&cmu_top CLK_ACLK_CAM1_333>, > + <&cmu_top CLK_ACLK_CAM1_400>, > + <&cmu_top CLK_ACLK_CAM1_552>; ditto > + }; > + > + tmu_atlas0: tmu@10060000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10060000 0x200>; > + interrupts = <0 95 0>; > + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, > + <&cmu_peris CLK_SCLK_TMU0>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_atlas1: tmu@10068000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10068000 0x200>; > + interrupts = <0 96 0>; > + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, > + <&cmu_peris CLK_SCLK_TMU0>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_g3d: tmu@10070000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10070000 0x200>; > + interrupts = <0 99 0>; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-g3d-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_apollo: tmu@10078000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10078000 0x200>; > + interrupts = <0 115 0>; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_isp: tmu@1007c000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x1007c000 0x200>; > + interrupts = <0 94 0>; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + mct@101c0000 { > + compatible = "samsung,exynos5433-mct", Why 5433-mct compatible? > + "samsung,exynos4210-mct"; > + reg = <0x101c0000 0x800>; > + interrupts = <0 102 0>, <0 103 0>, <0 104 0>, <0 105 0>, > + <0 106 0>, <0 107 0>, <0 108 0>, <0 109 0>, > + <0 110 0>, <0 111 0>, <0 112 0>, <0 113 0>; > + clocks = <&xxti>, > + <&cmu_peris CLK_PCLK_MCT>; > + clock-names = "fin_pll", "mct"; > + }; > + > + pinctrl_alive: pinctrl@10580000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x10580000 0x1A20>, <0x11090000 0x100>; Can you switch to lowercase hex? > + > + wakeup-interrupt-controller { > + compatible = "samsung,exynos7-wakeup-eint"; > + interrupts = <0 16 0>; > + }; > + }; > + > + pinctrl_aud: pinctrl@114b0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x114b0000 0x1000>; > + interrupts = <0 68 0>; > + }; > + > + pinctrl_cpif: pinctrl@10fe0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x10fe0000 0x1000>; > + interrupts = <0 179 0>; > + }; > + > + pinctrl_ese: pinctrl@14ca0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14ca0000 0x1000>; > + interrupts = <0 413 0>; > + }; > + > + pinctrl_finger: pinctrl@14cb0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cb0000 0x1000>; > + interrupts = <0 414 0>; > + }; > + > + pinctrl_fsys: pinctrl@15690000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x15690000 0x1000>; > + interrupts = <0 229 0>; > + }; > + > + pinctrl_imem: pinctrl@11090000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x11090000 0x1000>; > + interrupts = <0 325 0>; > + }; > + > + pinctrl_nfc: pinctrl@14cd0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cd0000 0x1000>; > + interrupts = <0 441 0>; > + }; > + > + pinctrl_peric: pinctrl@14cc0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cc0000 0x1100>; > + interrupts = <0 440 0>; > + }; > + > + pinctrl_touch: pinctrl@14ce0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14ce0000 0x1100>; > + interrupts = <0 442 0>; > + }; > + > + rtc: rtc@10590000 { > + compatible = "samsung,exynos3250-rtc"; > + reg = <0x10590000 0x100>; > + interrupts = <0 385 0>, <0 386 0>; > + status = "disabled"; > + }; > + > + pmu_system_controller: system-controller@105c0000 { > + compatible = "samsung,exynos5433-pmu", "syscon"; > + reg = <0x105c0000 0x5008>; > + #clock-cells = <1>; > + clock-names = "clkout16"; > + clocks = <&xxti>; > + }; > + > + gic: interrupt-controller@11001000 { > + compatible = "arm,gic-400"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x11001000 0x1000>, > + <0x11002000 0x2000>, > + <0x11004000 0x2000>, > + <0x11006000 0x2000>; > + interrupts = <1 9 0xf04>; > + }; > + > + lpass: lpass@11400000 { > + compatible = "samsung,exynos5433-lpass"; > + reg = <0x11400000 0x100>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + i2s0: i2s0@11440000 { > + compatible = "samsung,exynos7-i2s"; > + reg = <0x11440000 0x100>; > + dmas = <&adma 0 &adma 2>; > + dma-names = "tx", "rx"; > + interrupts = <0 70 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_I2S_BCLK>; > + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s0_bus>; > + status = "disabled"; > + }; > + > + mipi_phy: video-phy@105C0708 { > + compatible = "samsung,exynos5433-mipi-video-phy"; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + samsung,cam0-sysreg = <&syscon_cam0>; > + samsung,cam1-sysreg = <&syscon_cam1>; > + samsung,disp-sysreg = <&syscon_disp>; > + }; > + > + decon: decon@13800000 { > + compatible = "samsung,exynos5433-decon"; > + reg = <0x13800000 0x2104>; > + clocks = <&cmu_disp CLK_PCLK_DECON>, > + <&cmu_disp CLK_ACLK_DECON>, > + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, > + <&cmu_disp CLK_ACLK_XIU_DECON0X>, > + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, > + <&cmu_disp CLK_SCLK_DECON_VCLK>, > + <&cmu_disp CLK_SCLK_DECON_ECLK>; > + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", > + "aclk_xiu_decon0x", "pclk_smmu_decon0x", > + "sclk_decon_vclk", "sclk_decon_eclk"; > + interrupt-names = "fifo", "vsync", "lcd_sys"; > + interrupts = <0 201 0>, <0 202 0>, <0 203 0>; > + samsung,disp-sysreg = <&syscon_disp>; > + status = "disabled"; > + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; > + iommu-names = "m0", "m1"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + decon_to_mic: endpoint { > + remote-endpoint = <&mic_to_decon>; > + }; > + }; > + }; > + }; > + > + dsi: dsi@13900000 { > + compatible = "samsung,exynos5433-mipi-dsi"; > + reg = <0x13900000 0xC0>; > + interrupts = <0 205 0>; > + phys = <&mipi_phy 1>; > + phy-names = "dsim"; > + clocks = <&cmu_disp CLK_PCLK_DSIM0>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, > + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, > + <&cmu_disp CLK_SCLK_DSIM0>; > + clock-names = "bus_clk", > + "phyclk_mipidphy0_bitclkdiv8", > + "phyclk_mipidphy0_rxclkesc0", > + "sclk_rgb_vclk_to_dsim0", > + "sclk_mipi"; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi_to_mic: endpoint { > + remote-endpoint = <&mic_to_dsi>; > + }; > + }; > + }; > + }; > + > + mic: mic@13930000 { > + compatible = "samsung,exynos5433-mic"; > + reg = <0x13930000 0x48>; > + clocks = <&cmu_disp CLK_PCLK_MIC0>, > + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; > + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; > + samsung,disp-syscon = <&syscon_disp>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mic_to_decon: endpoint { > + remote-endpoint = <&decon_to_mic>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + mic_to_dsi: endpoint { > + remote-endpoint = <&dsi_to_mic>; > + }; > + }; > + }; > + }; > + > + syscon_disp: syscon@13B80000 { Here and everywhere below - lowercase hex please. > + compatible = "samsung,exynos5433-sysreg", "syscon"; > + reg = <0x13B80000 0x1010>; > + }; > + > + syscon_cam0: syscon@120F0000 { > + compatible = "samsung,exynos5433-sysreg", "syscon"; > + reg = <0x120F0000 0x1020>; > + }; > + > + syscon_cam1: syscon@145F0000 { > + compatible = "samsung,exynos5433-sysreg", "syscon"; > + reg = <0x145F0000 0x1038>; > + }; > + > + sysmmu_gscl0: sysmmu@0x13C80000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13C80000 0x1000>; > + interrupts = <0 288 0>; > + clock-names = "aclk", "pclk"; > + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>, > + <&cmu_gscl CLK_PCLK_SMMU_GSCL0>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_gscl1: sysmmu@0x13C90000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13C90000 0x1000>; > + interrupts = <0 290 0>; > + clock-names = "aclk", "pclk"; > + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>, > + <&cmu_gscl CLK_PCLK_SMMU_GSCL1>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_gscl2: sysmmu@0x13CA0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13CA0000 0x1000>; > + interrupts = <0 292 0>; > + clock-names = "aclk", "pclk"; > + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>, > + <&cmu_gscl CLK_PCLK_SMMU_GSCL2>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_decon0x: sysmmu@0x13A00000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13A00000 0x1000>; > + interrupts = <0 192 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, > + <&cmu_disp CLK_ACLK_SMMU_DECON0X>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_decon1x: sysmmu@0x13A10000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13A10000 0x1000>; > + interrupts = <0 194 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, > + <&cmu_disp CLK_ACLK_SMMU_DECON1X>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_tv0x: sysmmu@0x13A20000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13A20000 0x1000>; > + interrupts = <0 214 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, > + <&cmu_disp CLK_ACLK_SMMU_TV0X>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_tv1x: sysmmu@0x13A30000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13A30000 0x1000>; > + interrupts = <0 216 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, > + <&cmu_disp CLK_ACLK_SMMU_TV1X>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_mfc_0: sysmmu@0x15200000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x15200000 0x1000>; > + interrupts = <0 352 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, > + <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_mfc_1: sysmmu@0x15210000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x15210000 0x1000>; > + interrupts = <0 354 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, > + <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_jpeg: sysmmu@0x15060000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x15060000 0x1000>; > + interrupts = <0 408 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, > + <&cmu_mscl CLK_ACLK_SMMU_JPEG>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_flite_a: sysmmu@0x12150000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x12150000 0x1000>; > + interrupts = <0 128 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_A>, > + <&cmu_cam0 CLK_ACLK_SMMU_LITE_A>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_flite_b: sysmmu@0x12160000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x12160000 0x1000>; > + interrupts = <0 130 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_B>, > + <&cmu_cam0 CLK_ACLK_SMMU_LITE_B>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_flite_d: sysmmu@0x12170000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x12170000 0x1000>; > + interrupts = <0 132 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_D>, > + <&cmu_cam0 CLK_ACLK_SMMU_LITE_D>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_3aa0: sysmmu@0x12180000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x12180000 0x1000>; > + interrupts = <0 137 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_cam0 CLK_PCLK_SMMU_3AA0>, > + <&cmu_cam0 CLK_ACLK_SMMU_3AA0>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_3aa1: sysmmu@0x121A0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x121A0000 0x1000>; > + interrupts = <0 147 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_cam0 CLK_PCLK_SMMU_3AA1>, > + <&cmu_cam0 CLK_ACLK_SMMU_3AA1>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_flite_c: sysmmu@0x142B0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x142B0000 0x1000>; > + interrupts = <0 160 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_cam1 CLK_PCLK_SMMU_LITE_C>, > + <&cmu_cam1 CLK_ACLK_SMMU_LITE_C>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_fd: sysmmu@0x142C0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x142C0000 0x1000>; > + interrupts = <0 162 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_cam1 CLK_PCLK_SMMU_FD>, > + <&cmu_cam1 CLK_ACLK_SMMU_FD>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_cpu: sysmmu@0x142D0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x142D0000 0x1000>; > + interrupts = <0 169 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_ISPCPU>, > + <&cmu_isp CLK_ACLK_SMMU_ISPCPU>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_isp: sysmmu@0x14320000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x14320000 0x1000>; > + interrupts = <0 346 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_ISP>, > + <&cmu_isp CLK_ACLK_SMMU_ISP>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_drc: sysmmu@0x14330000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x14330000 0x1000>; > + interrupts = <0 338 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_DRC>, > + <&cmu_isp CLK_ACLK_SMMU_DRC>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_scc: sysmmu@0x14340000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x14340000 0x1000>; > + interrupts = <0 340 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_SCALERC>, > + <&cmu_isp CLK_ACLK_SMMU_SCALERC>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_dis0: sysmmu@0x143A0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x143A0000 0x1000>; > + interrupts = <0 342 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_DIS0>, > + <&cmu_isp CLK_ACLK_SMMU_DIS0>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_dis1: sysmmu@0x143B0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x143B0000 0x1000>; > + interrupts = <0 344 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_DIS1>, > + <&cmu_isp CLK_ACLK_SMMU_DIS1>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_scp: sysmmu@0x143C0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x143C0000 0x1000>; > + interrupts = <0 336 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_SCALERP>, > + <&cmu_isp CLK_ACLK_SMMU_SCALERP>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_fimc_3dnr: sysmmu@0x143D0000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x143D0000 0x1000>; > + interrupts = <0 349 0>; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_isp CLK_PCLK_SMMU_3DNR>, > + <&cmu_isp CLK_ACLK_SMMU_3DNR>; > + #iommu-cells = <0>; > + }; > + > + serial_0: serial@14c10000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c10000 0x100>; > + interrupts = <0 421 0>; > + clocks = <&cmu_peric CLK_PCLK_UART0>, > + <&cmu_peric CLK_SCLK_UART0>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_bus>; > + status = "disabled"; > + }; > + > + serial_1: serial@14c20000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c20000 0x100>; > + interrupts = <0 422 0>; > + clocks = <&cmu_peric CLK_PCLK_UART1>, > + <&cmu_peric CLK_SCLK_UART1>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_bus>; > + status = "disabled"; > + }; > + > + serial_2: serial@14c30000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c30000 0x100>; > + interrupts = <0 423 0>; > + clocks = <&cmu_peric CLK_PCLK_UART2>, > + <&cmu_peric CLK_SCLK_UART2>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart2_bus>; Just like rest of serials, this should be also disabled. > + }; > + > + serial_3: serial@11460000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x11460000 0x100>; > + interrupts = <0 67 0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, > + <&cmu_aud CLK_SCLK_AUD_UART>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart_aud_bus>; > + status = "disabled"; > + }; > + > + spi_0: spi@14d20000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d20000 0x100>; > + interrupts = <0 432 0>; > + dmas = <&pdma0 9>, <&pdma0 8>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI0>, > + <&cmu_peric CLK_SCLK_SPI0>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI0>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi0_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_1: spi@14d30000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d30000 0x100>; > + interrupts = <0 433 0>; > + dmas = <&pdma0 11>, <&pdma0 10>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI1>, > + <&cmu_peric CLK_SCLK_SPI1>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_2: spi@14d40000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d40000 0x100>; > + interrupts = <0 434 0>; > + dmas = <&pdma0 13>, <&pdma0 12>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI2>, > + <&cmu_peric CLK_SCLK_SPI2>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI2>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_3: spi@14d50000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d50000 0x100>; > + interrupts = <0 447 0>; > + dmas = <&pdma0 23>, <&pdma0 22>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI3>, > + <&cmu_peric CLK_SCLK_SPI3>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI3>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi3_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_4: spi@14d00000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d00000 0x100>; > + interrupts = <0 412 0>; > + dmas = <&pdma0 25>, <&pdma0 24>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI4>, > + <&cmu_peric CLK_SCLK_SPI4>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI4>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi4_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + adc: adc@14d10000 { > + compatible = "samsung,exynos7-adc"; > + reg = <0x14d10000 0x100>; > + interrupts = <0 438 0>; > + clock-names = "adc"; > + clocks = <&cmu_peric CLK_PCLK_ADCIF>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + status = "disabled"; > + }; > + > + pwm: pwm@14dd0000 { > + compatible = "samsung,exynos4210-pwm"; > + reg = <0x14dd0000 0x100>; > + interrupts = <0 416 0>, <0 417 0>, > + <0 418 0>, <0 419 0>, <0 420 0>; > + samsung,pwm-outputs = <0>, <1>, <2>, <3>; > + clocks = <&cmu_peric CLK_PCLK_PWM>; > + clock-names = "timers"; > + #pwm-cells = <3>; > + status = "disabled"; > + }; > + > + hsi2c_0: hsi2c@14e40000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e40000 0x1000>; > + interrupts = <0 428 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c0_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C0>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_1: hsi2c@14e50000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e50000 0x1000>; > + interrupts = <0 429 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c1_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C1>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_2: hsi2c@14e60000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e60000 0x1000>; > + interrupts = <0 430 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c2_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C2>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_3: hsi2c@14e70000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e70000 0x1000>; > + interrupts = <0 431 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c3_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C3>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_4: hsi2c@14ec0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ec0000 0x1000>; > + interrupts = <0 424 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c4_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C4>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_5: hsi2c@14ed0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ed0000 0x1000>; > + interrupts = <0 425 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c5_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C5>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_6: hsi2c@14ee0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ee0000 0x1000>; > + interrupts = <0 426 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c6_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C6>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_7: hsi2c@14ef0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ef0000 0x1000>; > + interrupts = <0 427 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c7_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C7>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_8: hsi2c@14d90000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14d90000 0x1000>; > + interrupts = <0 443 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c8_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C8>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_9: hsi2c@14da0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14da0000 0x1000>; > + interrupts = <0 444 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c9_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C9>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_10: hsi2c@14de0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14de0000 0x1000>; > + interrupts = <0 445 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c10_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C10>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_11: hsi2c@14df0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14df0000 0x1000>; > + interrupts = <0 446 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c11_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C11>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + usbdrd30: usb@15400000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, > + <&cmu_fsys CLK_SCLK_USBDRD30>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, > + <&cmu_top CLK_MOUT_SCLK_USBDRD30>, > + <&cmu_top CLK_DIV_SCLK_USBDRD30>; > + assigned-clock-parents = > + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>; > + assigned-clock-rates = <0>, <0>, <66700000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + dwc3 { > + compatible = "snps,dwc3"; > + reg = <0x15400000 0x10000>; > + interrupts = <0 231 0>; > + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + > + }; > + > + usbdrd30_phy: phy@15500000 { > + compatible = "samsung,exynos5433-usbdrd-phy"; > + reg = <0x15500000 0x100>; > + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>, > + <&cmu_fsys CLK_SCLK_USBDRD30>; > + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>; > + assigned-clock-parents = > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + usbhost30_phy: phy@15580000 { > + compatible = "samsung,exynos5433-usbdrd-phy"; > + reg = <0x15580000 0x100>; > + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>, > + <&cmu_fsys CLK_SCLK_USBHOST30>; > + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", > + "itp"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>; > + assigned-clock-parents = > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + usbhost30: usb@15a00000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, > + <&cmu_fsys CLK_SCLK_USBHOST30>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, > + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, > + <&cmu_top CLK_DIV_SCLK_USBHOST30>; > + assigned-clock-parents = > + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>; > + assigned-clock-rates = <0>, <0>, <66700000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + usbdrd_dwc3_0: dwc3 { > + compatible = "snps,dwc3"; > + reg = <0x15a00000 0x10000>; > + interrupts = <0 244 0>; > + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > + > + mshc_0: mshc@15540000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = <0 225 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15540000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC0>, > + <&cmu_fsys CLK_SCLK_MMC0>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mshc_1: mshc@15550000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = <0 226 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15550000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC1>, > + <&cmu_fsys CLK_SCLK_MMC1>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mshc_2: mshc@15560000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = <0 227 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15560000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC2>, > + <&cmu_fsys CLK_SCLK_MMC2>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + amba { > + compatible = "arm,amba-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + pdma0: pdma@15610000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x15610000 0x1000>; > + interrupts = <0 228 0>; > + clocks = <&cmu_fsys CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + pdma1: pdma@15600000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x15600000 0x1000>; > + interrupts = <0 246 0>; > + clocks = <&cmu_fsys CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + adma: adma@11420000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x11420000 0x1000>; > + interrupts = <0 73 0>; > + clocks = <&cmu_aud CLK_ACLK_DMAC>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + }; > + }; > + > + timer: timer { > + compatible = "arm,armv8-timer"; > + interrupts = <1 13 0xff04>, > + <1 14 0xff04>, > + <1 11 0xff04>, > + <1 10 0xff04>; Please use human friendly names from dt-bindings/interrupt-controller/arm-gic.h. Something like this: https://git.kernel.org/cgit/linux/kernel/git/krzk/linux.git/commit/?h=next/dt64&id=36d1c9cd07cd6a065f1dde3cbbfe3a9867d693a4 Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Chanwoo, On 08/16/2016 08:35 AM, Chanwoo Choi wrote: > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports > PSCI (Power State Coordination Interface) v0.1. > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1580 ++++++++++++++++++++ > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > new file mode 100644 > index 000000000000..2a5b05744533 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -0,0 +1,1580 @@ > + > +/ { > + compatible = "samsung,exynos5433"; > + #address-cells = <2>; > + #size-cells = <2>; > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x0 0x18000000>; > + lpass: lpass@11400000 { > + compatible = "samsung,exynos5433-lpass"; > + reg = <0x11400000 0x100>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + i2s0: i2s0@11440000 { > + compatible = "samsung,exynos7-i2s"; > + reg = <0x11440000 0x100>; > + dmas = <&adma 0 &adma 2>; > + dma-names = "tx", "rx"; > + interrupts = <0 70 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_I2S_BCLK>; > + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s0_bus>; > + status = "disabled"; > + }; > + serial_3: serial@11460000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x11460000 0x100>; > + interrupts = <0 67 0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, > + <&cmu_aud CLK_SCLK_AUD_UART>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart_aud_bus>; > + status = "disabled"; > + }; > + > + amba { > + compatible = "arm,amba-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + adma: adma@11420000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x11420000 0x1000>; > + interrupts = <0 73 0>; > + clocks = <&cmu_aud CLK_ACLK_DMAC>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + }; > + }; The latest Exynos5433 Audio Subsystem bindings look like this https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.9/mfd/exynos-lpass-v5&id=104cc6ad3ecc7c4c8ecf73663b93eb48b78f35aa i.e. adma@11420000, i2s0@11440000, serial@11460000 should be subnodes of the lpass@11400000 node.
Hi Krzysztof, On 2016년 08월 16일 19:29, Krzysztof Kozlowski wrote: > Hi Chanwoo, > > Thanks for the patch and for squashing all contributions into one. I > know that this removes individuals from authors but it makes development > consistent. Of course I don't mind splitting things if they are sent > separately following convention of "release early, release often". > > I have just few minor nits, nothing important. I'll review the boards a > little bit later because of other taks. > > On 08/16/2016 08:35 AM, Chanwoo Choi wrote: >> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on >> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports >> PSCI (Power State Coordination Interface) v0.1. >> >> This patch includes following Device Tree node to support Exynos5433 SoC: >> 1. Octa cores for big.LITTLE architecture >> - Cortex-A53 LITTLE Quad-core >> - Cortex-A57 big Quad-core >> - Support PSCI v0.1 >> >> 2. Clock controller node >> - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS >> - CMU_CPIF : clocks for LLI (Low Latency Interface) >> - CMU_MIF : clocks for DRAM Memory Controller >> - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS >> - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC >> - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA >> - CMU_G2D : clocks for G2D/MDMA >> - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER >> - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO >> - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses >> - CMU_G3D : clocks for 3D Graphics Engine >> - CMU_GSCL : clocks for GSCALER >> - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor. >> - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor, >> CoreSight and L2 cache controller. >> - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs. >> - CMU_MFC : clocks for MFC (Multi-Format Codec) IP. >> - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP. >> - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. >> - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. >> - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs. >> >> 3. pinctrl node for GPIO >> - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad >> >> 4. Timer >> - ARM architecture timer (armv8-timer) >> - MCT (Multi Core Timer) timer >> >> 5. Interrupt controller (GIC-400) >> >> 6. BUS devices >> - HS-I2C (High-Speed I2C) device >> - SPI (Serial Peripheral Interface) device >> >> 7. Sound devices >> - I2S bus >> - LPASS (Low Power Audio Subsystem) >> >> 8. Power management devices >> - CPUFREQ for for Cortex-A53/A57 >> - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP >> >> 9. Display controller devices >> - DECON (Display and enhancement controller) for panel output >> - DSI (Display Serial Interface) >> - MIC (Mobile Image Compressor) >> - IOMMU for GSCL/DECON/TV/MFC/JPEG/FLITE/3AA/FIMC >> >> 10. USB >> - USB 3.0 DRD (Dual Role Device) controller >> - USB 3.0 Host controller >> >> 11. Storage devices >> - MSHC (Mobile Stoarage Host Controller) >> >> 12. Misc devices >> - UART device >> - ADC (Analog Digital Converter) >> - PWM (Pulse Width Modulation) >> - ADMA (Advanced DMA) and PDMA (Peripheral DMA) >> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> >> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> >> Signed-off-by: Inki Dae <inki.dae@samsung.com> >> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> >> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> >> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> >> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> >> Signed-off-by: Inha Song <ideal.song@samsung.com> >> Signed-off-by: Ingi kim <ingi2.kim@samsung.com> >> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> >> --- >> arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++ >> .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 + >> .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 + >> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 306 ++++ >> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1580 ++++++++++++++++++++ >> 5 files changed, 2725 insertions(+) >> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi >> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi >> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi >> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi >> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi >> >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi >> new file mode 100644 >> index 000000000000..2bf94face3f7 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi >> @@ -0,0 +1,794 @@ >> +/* >> + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source >> + * >> + * Copyright (c) 2016 Samsung Electronics Co., Ltd. >> + * Chanwoo Choi <cw00.choi@samsung.com> >> + * >> + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device >> + * tree nodes are listed in this file. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#define PIN_PULL_NONE 0 >> +#define PIN_PULL_DOWN 1 >> +#define PIN_PULL_UP 3 >> + >> +#define PIN_DRV_LV1 0 >> +#define PIN_DRV_LV2 2 >> +#define PIN_DRV_LV3 1 >> +#define PIN_DRV_LV4 3 >> + >> +#define PIN_IN 0 >> +#define PIN_OUT 1 >> +#define PIN_FUNC1 2 >> + >> +#define PIN(_func, _pin, _pull, _drv) \ >> + _pin { \ >> + samsung,pins = #_pin; \ >> + samsung,pin-function = <PIN_ ##_func>; \ >> + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ >> + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ >> + } >> + >> +&pinctrl_alive { >> + gpa0: gpa0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + interrupt-parent = <&gic>; >> + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, >> + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa1: gpa1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + interrupt-parent = <&gic>; >> + interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, >> + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa2: gpa2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa3: gpa3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf1: gpf1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf2: gpf2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf3: gpf3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf4: gpf4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf5: gpf5 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> +}; >> + >> +&pinctrl_aud { >> + gpz0: gpz0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpz1: gpz1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + i2s0_bus: i2s0-bus { >> + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", >> + "gpz0-4", "gpz0-5", "gpz0-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <1>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pcm0_bus: pcm0-bus { >> + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <1>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart_aud_bus: uart-aud-bus { >> + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> +}; >> + >> +&pinctrl_cpif { >> + gpv6: gpv6 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> +}; >> + >> +&pinctrl_ese { >> + gpj2: gpj2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> +}; >> + >> +&pinctrl_finger { >> + gpd5: gpd5 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + spi2_bus: spi2-bus { >> + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + hs_i2c6_bus: hs-i2c6-bus { >> + samsung,pins = "gpd5-3", "gpd5-2"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + > > Unnecessary blank line. I'll remove it. > >> +}; >> + >> +&pinctrl_fsys { >> + gph1: gph1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpr4: gpr4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpr0: gpr0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpr1: gpr1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpr2: gpr2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpr3: gpr3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + sd0_clk: sd0-clk { >> + samsung,pins = "gpr0-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_cmd: sd0-cmd { >> + samsung,pins = "gpr0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_rdqs: sd0-rdqs { >> + samsung,pins = "gpr0-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <1>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_qrdy: sd0-qrdy { >> + samsung,pins = "gpr0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <1>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus1: sd0-bus-width1 { >> + samsung,pins = "gpr1-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus4: sd0-bus-width4 { >> + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus8: sd0-bus-width8 { >> + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_clk: sd1-clk { >> + samsung,pins = "gpr2-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_cmd: sd1-cmd { >> + samsung,pins = "gpr2-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus1: sd1-bus-width1 { >> + samsung,pins = "gpr3-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus4: sd1-bus-width4 { >> + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus8: sd1-bus-width8 { >> + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + pcie_bus: pcie_bus { >> + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + }; >> + >> + sd2_clk: sd2-clk { >> + samsung,pins = "gpr4-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cmd: sd2-cmd { >> + samsung,pins = "gpr4-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cd: sd2-cd { >> + samsung,pins = "gpr4-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus1: sd2-bus-width1 { >> + samsung,pins = "gpr4-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus4: sd2-bus-width4 { >> + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_clk_output: sd2-clk-output { >> + samsung,pins = "gpr4-0"; >> + samsung,pin-function = <1>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <2>; >> + }; >> + >> + sd2_cmd_output: sd2-cmd-output { >> + samsung,pins = "gpr4-1"; >> + samsung,pin-function = <1>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <2>; >> + }; >> +}; >> + >> +&pinctrl_imem { >> + gpf0: gpf0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> +}; >> + >> +&pinctrl_nfc { >> + gpj0: gpj0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + hs_i2c4_bus: hs-i2c4-bus { >> + samsung,pins = "gpj0-1", "gpj0-0"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + > > Ditto I'll remove it. > >> +}; >> + >> +&pinctrl_peric { >> + gpv7: gpv7 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb0: gpb0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc0: gpc0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc1: gpc1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc2: gpc2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc3: gpc3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg0: gpg0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd0: gpd0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd1: gpd1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd2: gpd2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd4: gpd4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd8: gpd8 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd6: gpd6 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd7: gpd7 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg1: gpg1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg2: gpg2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg3: gpg3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + hs_i2c8_bus: hs-i2c8-bus { >> + samsung,pins = "gpb0-1", "gpb0-0"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + hs_i2c9_bus: hs-i2c9-bus { >> + samsung,pins = "gpb0-3", "gpb0-2"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2s1_bus: i2s1-bus { >> + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", >> + "gpd4-3", "gpd4-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <1>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pcm1_bus: pcm1-bus { >> + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", >> + "gpd4-3", "gpd4-4"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <1>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spdif_bus: spdif-bus { >> + samsung,pins = "gpd4-3", "gpd4-4"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <1>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_spi_pin0: fimc-is-spi-pin0 { >> + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_spi_pin1: fimc-is-spi-pin1 { >> + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart0_bus: uart0-bus { >> + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + }; >> + >> + hs_i2c2_bus: hs-i2c2-bus { >> + samsung,pins = "gpd0-3", "gpd0-2"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart2_bus: uart2-bus { >> + samsung,pins = "gpd1-5", "gpd1-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + }; >> + >> + uart1_bus: uart1-bus { >> + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + }; >> + >> + hs_i2c3_bus: hs-i2c3-bus { >> + samsung,pins = "gpd1-3", "gpd1-2"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + > > Ditto I'll remove it. > >> + >> + hs_i2c0_bus: hs-i2c0-bus { >> + samsung,pins = "gpd2-1", "gpd2-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + hs_i2c1_bus: hs-i2c1-bus { >> + samsung,pins = "gpd2-3", "gpd2-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm0_out: pwm0-out { >> + samsung,pins = "gpd2-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm1_out: pwm1-out { >> + samsung,pins = "gpd2-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm2_out: pwm2-out { >> + samsung,pins = "gpd2-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm3_out: pwm3-out { >> + samsung,pins = "gpd2-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi1_bus: spi1-bus { >> + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + hs_i2c7_bus: hs-i2c7-bus { >> + samsung,pins = "gpd2-7", "gpd2-6"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi0_bus: spi0-bus { >> + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + hs_i2c10_bus: hs-i2c10-bus { >> + samsung,pins = "gpg3-1", "gpg3-0"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + hs_i2c11_bus: hs-i2c11-bus { >> + samsung,pins = "gpg3-3", "gpg3-2"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi3_bus: spi3-bus { >> + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi4_bus: spi4-bus { >> + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_uart: fimc-is-uart { >> + samsung,pins = "gpc1-1", "gpc0-7"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_ch0_i2c: fimc-is-ch0_i2c { >> + samsung,pins = "gpc2-1", "gpc2-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_ch0_mclk: fimc-is-ch0_mclk { >> + samsung,pins = "gpd7-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_ch1_i2c: fimc-is-ch1-i2c { >> + samsung,pins = "gpc2-3", "gpc2-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_ch1_mclk: fimc-is-ch1-mclk { >> + samsung,pins = "gpd7-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_ch2_i2c: fimc-is-ch2-i2c { >> + samsung,pins = "gpc2-5", "gpc2-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_ch2_mclk: fimc-is-ch2-mclk { >> + samsung,pins = "gpd7-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> +}; >> + >> +&pinctrl_touch { >> + gpj1: gpj1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + hs_i2c5_bus: hs-i2c5-bus { >> + samsung,pins = "gpj1-1", "gpj1-0"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> +}; > > > (...) > >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi >> new file mode 100644 >> index 000000000000..175121db367e >> --- /dev/null >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi >> @@ -0,0 +1,306 @@ >> +/* >> + * Device tree sources for Exynos5433 thermal zone >> + * >> + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <dt-bindings/thermal/thermal.h> >> + >> +/ { >> +thermal-zones { >> + atlas0_thermal: atlas0-thermal { >> + thermal-sensors = <&tmu_atlas0>; >> + polling-delay-passive = <0>; >> + polling-delay = <0>; >> + trips { >> + atlas0_alert_0: atlas0-alert-0 { >> + temperature = <50000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas0_alert_1: atlas0-alert-1 { >> + temperature = <55000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas0_alert_2: atlas0-alert-2 { >> + temperature = <60000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas0_alert_3: atlas0-alert-3 { >> + temperature = <70000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas0_alert_4: atlas0-alert-4 { >> + temperature = <80000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas0_alert_5: atlas0-alert-5 { >> + temperature = <90000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas0_alert_6: atlas0-alert-6 { >> + temperature = <95000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; > > No critical trip? I think it might be useful to shutdown the system in a > user-friendly way. When I use the critical trip, the following event occur[1]. But, I guess that this temperature is not correct temperature because after completing the kernel booting, the temperature of big.LITTLE/G3D are normal when checking the /sys/class/thermal/thermal_zoneX/temp right after booting. - Maintain a uniform temperature(38 ~ 45 millicelsius) right after kernel booting. I guess that the critical interrupt may occur before initializing the exynos tmu. But, I don't spend the many time to check the exynos-tmu.c driver. [1] [ 445.122122] thermal thermal_zone0: critical temperature reached(108 C),shutting down [ 445.122399] exynos-tmu 10060000.tmu: Temperature sensor ID: 0xa [ 445.122588] exynos-tmu 10060000.tmu: Calibration type is 2-point calibration [ 445.127942] reboot: Failed to start orderly shutdown: forcing the issue [ 445.134586] Emergency Sync complete [ 1.097954] reboot: Power down > >> + }; >> + >> + cooling-maps { >> + map0 { >> + /* Set maximum frequency as 1800MHz */ >> + trip = <&atlas0_alert_0>; >> + cooling-device = <&cpu4 1 1>; > > Out of curiosity: why choosing specific cooling level (so quite fast > the device will slow down) instead of letting cooling framework to > decide how much to cool? Any particular reason behind this? This cooling level is just default value in cooling-maps. This value is able to overwrite on dts file. And the thermal subsystem support the cpu cooling features with 'cooling-maps'. Also, when I tested the performance and stress test with GLBenchmark, the temperature of big.LITTLE cores/G3D reach easily the critical temperature with 8 online cores. So, I add the cooling level aggressively to protect the system fault of CPU and GPU and to maintain the system state. > >> + }; >> + map1 { >> + /* Set maximum frequency as 1700MHz */ >> + trip = <&atlas0_alert_1>; >> + cooling-device = <&cpu4 2 2>; >> + }; >> + map2 { >> + /* Set maximum frequency as 1600MHz */ >> + trip = <&atlas0_alert_2>; >> + cooling-device = <&cpu4 3 3>; >> + }; >> + map3 { >> + /* Set maximum frequency as 1500MHz */ >> + trip = <&atlas0_alert_3>; >> + cooling-device = <&cpu4 4 4>; >> + }; >> + map4 { >> + /* Set maximum frequency as 1400MHz */ >> + trip = <&atlas0_alert_4>; >> + cooling-device = <&cpu4 5 5>; >> + }; >> + map5 { >> + /* Set maximum frequencyas 1200MHz */ >> + trip = <&atlas0_alert_5>; >> + cooling-device = <&cpu4 7 7>; >> + }; >> + map6 { >> + /* Set maximum frequency as 800MHz */ >> + trip = <&atlas0_alert_6>; >> + cooling-device = <&cpu4 11 11>; >> + }; >> + }; >> + }; >> + >> + atlas1_thermal: atlas1-thermal { >> + thermal-sensors = <&tmu_atlas1>; >> + polling-delay-passive = <0>; >> + polling-delay = <0>; >> + trips { >> + atlas1_alert_0: atlas1-alert-0 { >> + temperature = <50000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas1_alert_1: atlas1-alert-1 { >> + temperature = <55000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas1_alert_2: atlas1-alert-2 { >> + temperature = <60000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas1_alert_3: atlas1-alert-3 { >> + temperature = <70000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas1_alert_4: atlas1-alert-4 { >> + temperature = <80000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas1_alert_5: atlas1-alert-5 { >> + temperature = <90000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + atlas1_alert_6: atlas1-alert-6 { >> + temperature = <95000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; > > Same, critical trip point? > >> + }; >> + }; >> + >> + g3d_thermal: g3d-thermal { >> + thermal-sensors = <&tmu_g3d>; >> + polling-delay-passive = <0>; >> + polling-delay = <0>; >> + trips { >> + g3d_alert_0: g3d-alert-0 { >> + temperature = <70000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + g3d_alert_1: g3d-alert-1 { >> + temperature = <75000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + g3d_alert_2: g3d-alert-2 { >> + temperature = <80000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + g3d_alert_3: g3d-alert-3 { >> + temperature = <85000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + g3d_alert_4: g3d-alert-4 { >> + temperature = <90000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + g3d_alert_5: g3d-alert-5 { >> + temperature = <95000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + g3d_alert_6: g3d-alert-6 { >> + temperature = <100000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + }; >> + }; >> + >> + apollo_thermal: apollo-thermal { >> + thermal-sensors = <&tmu_apollo>; >> + polling-delay-passive = <0>; >> + polling-delay = <0>; >> + trips { >> + apollo_alert_0: apollo-alert-0 { >> + temperature = <50000>; /* millicelsius */ >> + hysteresis = <10000>; /* millicelsius */ >> + type = "active"; >> + }; >> + apollo_alert_1: apollo-alert-1 { >> + temperature = <55000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + apollo_alert_2: apollo-alert-2 { >> + temperature = <60000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + apollo_alert_3: apollo-alert-3 { >> + temperature = <70000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + apollo_alert_4: apollo-alert-4 { >> + temperature = <80000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + apollo_alert_5: apollo-alert-5 { >> + temperature = <90000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + apollo_alert_6: apollo-alert-6 { >> + temperature = <95000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + }; >> + >> + cooling-maps { >> + map0 { >> + /* Set maximum frequency as 1200MHz */ >> + trip = <&apollo_alert_0>; >> + cooling-device = <&cpu0 1 1>; >> + }; >> + map1 { >> + /* Set maximum frequency as 1100MHz */ >> + trip = <&apollo_alert_1>; >> + cooling-device = <&cpu0 2 2>; >> + }; >> + map2 { >> + /* Set maximum frequency as 1000MHz */ >> + trip = <&apollo_alert_2>; >> + cooling-device = <&cpu0 3 3>; >> + }; >> + map3 { >> + /* Set maximum frequency as 900MHz */ >> + trip = <&apollo_alert_3>; >> + cooling-device = <&cpu0 4 4>; >> + }; >> + map4 { >> + /* Set maximum frequency as 800MHz */ >> + trip = <&apollo_alert_4>; >> + cooling-device = <&cpu0 5 5>; >> + }; >> + map5 { >> + /* Set maximum frequency as 700MHz */ >> + trip = <&apollo_alert_5>; >> + cooling-device = <&cpu0 6 6>; >> + }; >> + map6 { >> + /* Set maximum frequency as 500MHz */ >> + trip = <&apollo_alert_6>; >> + cooling-device = <&cpu0 8 8>; >> + }; >> + }; >> + }; >> + >> + isp_thermal: isp-thermal { >> + thermal-sensors = <&tmu_isp>; >> + polling-delay-passive = <0>; >> + polling-delay = <0>; >> + trips { >> + isp_alert_0: isp-alert-0 { >> + temperature = <80000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + isp_alert_1: isp-alert-1 { >> + temperature = <85000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + isp_alert_2: isp-alert-2 { >> + temperature = <90000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + isp_alert_3: isp-alert-3 { >> + temperature = <95000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + isp_alert_4: isp-alert-4 { >> + temperature = <100000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + isp_alert_5: isp-alert-5 { >> + temperature = <105000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + isp_alert_6: isp-alert-6 { >> + temperature = <110000>; /* millicelsius */ >> + hysteresis = <1000>; /* millicelsius */ >> + type = "active"; >> + }; >> + }; >> + }; >> +}; >> +}; >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi >> new file mode 100644 >> index 000000000000..2a5b05744533 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi >> @@ -0,0 +1,1580 @@ >> +/* >> + * Samsung's Exynos5433 SoC device tree source >> + * >> + * Copyright (c) 2016 Samsung Electronics Co., Ltd. >> + * >> + * Samsung's Exynos5433 SoC device nodes are listed in this file. >> + * Exynos5433 based board files can include this file and provide >> + * values for board specific bindings. >> + * >> + * Note: This file does not include device nodes for all the controllers in >> + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, >> + * additional nodes can be added to this file. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <dt-bindings/clock/exynos5433.h> >> + >> +/ { >> + compatible = "samsung,exynos5433"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + interrupt-parent = <&gic>; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu0: cpu@100 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x100>; >> + clock-frequency = <1300000000>; >> + clocks = <&cmu_apollo CLK_SCLK_APOLLO>; >> + clock-names = "apolloclk"; >> + operating-points-v2 = <&cluster_a53_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + >> + cpu1: cpu@101 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x101>; >> + clock-frequency = <1300000000>; >> + operating-points-v2 = <&cluster_a53_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + >> + cpu2: cpu@102 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x102>; >> + clock-frequency = <1300000000>; >> + operating-points-v2 = <&cluster_a53_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + >> + cpu3: cpu@103 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x103>; >> + clock-frequency = <1300000000>; >> + operating-points-v2 = <&cluster_a53_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + >> + cpu4: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a57", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x0>; >> + clock-frequency = <1900000000>; >> + clocks = <&cmu_atlas CLK_SCLK_ATLAS>; >> + clock-names = "atlasclk"; >> + operating-points-v2 = <&cluster_a57_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + >> + cpu5: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a57", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x1>; >> + clock-frequency = <1900000000>; >> + operating-points-v2 = <&cluster_a57_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + >> + cpu6: cpu@2 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a57", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x2>; >> + clock-frequency = <1900000000>; >> + operating-points-v2 = <&cluster_a57_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + >> + cpu7: cpu@3 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a57", "arm,armv8"; >> + enable-method = "psci"; >> + reg = <0x3>; >> + clock-frequency = <1900000000>; >> + operating-points-v2 = <&cluster_a57_opp_table>; >> + #cooling-cells = <2>; >> + }; >> + }; >> + >> + cluster_a53_opp_table: opp_table0 { >> + compatible = "operating-points-v2"; >> + opp-shared; >> + >> + opp@400000000 { >> + opp-hz = /bits/ 64 <400000000>; >> + opp-microvolt = <900000>; >> + }; >> + opp@500000000 { >> + opp-hz = /bits/ 64 <500000000>; >> + opp-microvolt = <925000>; >> + }; >> + opp@600000000 { >> + opp-hz = /bits/ 64 <600000000>; >> + opp-microvolt = <950000>; >> + }; >> + opp@700000000 { >> + opp-hz = /bits/ 64 <700000000>; >> + opp-microvolt = <975000>; >> + }; >> + opp@800000000 { >> + opp-hz = /bits/ 64 <800000000>; >> + opp-microvolt = <1000000>; >> + }; >> + opp@900000000 { >> + opp-hz = /bits/ 64 <900000000>; >> + opp-microvolt = <1050000>; >> + }; >> + opp@1000000000 { >> + opp-hz = /bits/ 64 <1000000000>; >> + opp-microvolt = <1075000>; >> + }; >> + opp@1100000000 { >> + opp-hz = /bits/ 64 <1100000000>; >> + opp-microvolt = <1112500>; >> + }; >> + opp@1200000000 { >> + opp-hz = /bits/ 64 <1200000000>; >> + opp-microvolt = <1112500>; >> + }; >> + opp@1300000000 { >> + opp-hz = /bits/ 64 <1300000000>; >> + opp-microvolt = <1150000>; >> + }; >> + }; >> + >> + cluster_a57_opp_table: opp_table1 { >> + compatible = "operating-points-v2"; >> + opp-shared; >> + >> + opp@500000000 { >> + opp-hz = /bits/ 64 <500000000>; >> + opp-microvolt = <900000>; >> + }; >> + opp@600000000 { >> + opp-hz = /bits/ 64 <600000000>; >> + opp-microvolt = <900000>; >> + }; >> + opp@700000000 { >> + opp-hz = /bits/ 64 <700000000>; >> + opp-microvolt = <912500>; >> + }; >> + opp@800000000 { >> + opp-hz = /bits/ 64 <800000000>; >> + opp-microvolt = <912500>; >> + }; >> + opp@900000000 { >> + opp-hz = /bits/ 64 <900000000>; >> + opp-microvolt = <937500>; >> + }; >> + opp@1000000000 { >> + opp-hz = /bits/ 64 <1000000000>; >> + opp-microvolt = <975000>; >> + }; >> + opp@1100000000 { >> + opp-hz = /bits/ 64 <1100000000>; >> + opp-microvolt = <1012500>; >> + }; >> + opp@1200000000 { >> + opp-hz = /bits/ 64 <1200000000>; >> + opp-microvolt = <1037500>; >> + }; >> + opp@1300000000 { >> + opp-hz = /bits/ 64 <1300000000>; >> + opp-microvolt = <1062500>; >> + }; >> + opp@1400000000 { >> + opp-hz = /bits/ 64 <1400000000>; >> + opp-microvolt = <1087500>; >> + }; >> + opp@1500000000 { >> + opp-hz = /bits/ 64 <1500000000>; >> + opp-microvolt = <1125000>; >> + }; >> + opp@1600000000 { >> + opp-hz = /bits/ 64 <1600000000>; >> + opp-microvolt = <1137500>; >> + }; >> + opp@1700000000 { >> + opp-hz = /bits/ 64 <1700000000>; >> + opp-microvolt = <1175000>; >> + }; >> + opp@1800000000 { >> + opp-hz = /bits/ 64 <1800000000>; >> + opp-microvolt = <1212500>; >> + }; >> + opp@1900000000 { >> + opp-hz = /bits/ 64 <1900000000>; >> + opp-microvolt = <1262500>; >> + }; >> + }; >> + >> + psci { >> + compatible = "arm,psci"; >> + method = "smc"; >> + cpu_off = <0x84000002>; >> + cpu_on = <0xC4000003>; >> + }; >> + >> + reboot: syscon-reboot { >> + compatible = "syscon-reboot"; >> + regmap = <&pmu_system_controller>; >> + offset = <0x400>; >> + mask = <0x1>; >> + }; >> + >> + soc: soc { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0x0 0x0 0x0 0x18000000>; >> + >> + chipid@10000000 { >> + compatible = "samsung,exynos4210-chipid"; >> + reg = <0x10000000 0x100>; >> + }; >> + >> + xxti: xxti { >> + compatible = "fixed-clock"; >> + clock-output-names = "oscclk"; >> + #clock-cells = <0>; >> + }; >> + >> + cmu_top: clock-controller@10030000 { >> + compatible = "samsung,exynos5433-cmu-top"; >> + reg = <0x10030000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "sclk_mphy_pll", >> + "sclk_mfc_pll", >> + "sclk_bus_pll"; >> + clocks = <&xxti>, >> + <&cmu_cpif CLK_SCLK_MPHY_PLL>, >> + <&cmu_mif CLK_SCLK_MFC_PLL>, >> + <&cmu_mif CLK_SCLK_BUS_PLL>; >> + }; >> + >> + cmu_cpif: clock-controller@10fc0000 { >> + compatible = "samsung,exynos5433-cmu-cpif"; >> + reg = <0x10fc0000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk"; >> + clocks = <&xxti>; >> + }; >> + >> + cmu_mif: clock-controller@105b0000 { >> + compatible = "samsung,exynos5433-cmu-mif"; >> + reg = <0x105b0000 0x2000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "sclk_mphy_pll"; >> + clocks = <&xxti>, >> + <&cmu_cpif CLK_SCLK_MPHY_PLL>; > > Are these lines aligned? It looks not but maybe this is just my mail > client. Also it looks that spaces are used for clocks property but not > for clock-names. I'll fix it by using only tab. The exynos5433.dtsi uses the 'space' for aligned. It is my mistake. I'll only use the 'tab' instead of 'space'. > >> + }; >> + >> + cmu_peric: clock-controller@14c80000 { >> + compatible = "samsung,exynos5433-cmu-peric"; >> + reg = <0x14c80000 0x1000>; >> + #clock-cells = <1>; >> + }; >> + >> + cmu_peris: clock-controller@0x10040000 { >> + compatible = "samsung,exynos5433-cmu-peris"; >> + reg = <0x10040000 0x1000>; >> + #clock-cells = <1>; >> + }; >> + >> + cmu_fsys: clock-controller@156e0000 { >> + compatible = "samsung,exynos5433-cmu-fsys"; >> + reg = <0x156e0000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "sclk_ufs_mphy", >> + "div_aclk_fsys_200", >> + "sclk_pcie_100_fsys", >> + "sclk_ufsunipro_fsys", >> + "sclk_mmc2_fsys", >> + "sclk_mmc1_fsys", >> + "sclk_mmc0_fsys", >> + "sclk_usbhost30_fsys", >> + "sclk_usbdrd30_fsys"; >> + clocks = <&xxti>, >> + <&cmu_cpif CLK_SCLK_UFS_MPHY>, >> + <&cmu_top CLK_DIV_ACLK_FSYS_200>, >> + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, >> + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, >> + <&cmu_top CLK_SCLK_MMC2_FSYS>, >> + <&cmu_top CLK_SCLK_MMC1_FSYS>, >> + <&cmu_top CLK_SCLK_MMC0_FSYS>, >> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, >> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; > > Indentation looks like mixing spaces and tabs (or is it just my mail > program?). My mistake. I'll fix it. > >> + }; >> + >> + cmu_g2d: clock-controller@12460000 { >> + compatible = "samsung,exynos5433-cmu-g2d"; >> + reg = <0x12460000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "aclk_g2d_266", >> + "aclk_g2d_400"; >> + clocks = <&xxti>, >> + <&cmu_top CLK_ACLK_G2D_266>, >> + <&cmu_top CLK_ACLK_G2D_400>; >> + }; >> + >> + cmu_disp: clock-controller@13b90000 { >> + compatible = "samsung,exynos5433-cmu-disp"; >> + reg = <0x13b90000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "sclk_dsim1_disp", >> + "sclk_dsim0_disp", >> + "sclk_dsd_disp", >> + "sclk_decon_tv_eclk_disp", >> + "sclk_decon_vclk_disp", >> + "sclk_decon_eclk_disp", >> + "sclk_decon_tv_vclk_disp", >> + "aclk_disp_333"; >> + clocks = <&xxti>, >> + <&cmu_mif CLK_SCLK_DSIM1_DISP>, >> + <&cmu_mif CLK_SCLK_DSIM0_DISP>, >> + <&cmu_mif CLK_SCLK_DSD_DISP>, >> + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, >> + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, >> + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, >> + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, >> + <&cmu_mif CLK_ACLK_DISP_333>; > > ditto I'll fix it. > >> + }; >> + >> + cmu_aud: clock-controller@114c0000 { >> + compatible = "samsung,exynos5433-cmu-aud"; >> + reg = <0x114c0000 0x1000>; >> + #clock-cells = <1>; >> + }; >> + >> + cmu_bus0: clock-controller@13600000 { >> + compatible = "samsung,exynos5433-cmu-bus0"; >> + reg = <0x13600000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "aclk_bus0_400"; >> + clocks = <&cmu_top CLK_ACLK_BUS0_400>; >> + }; >> + >> + cmu_bus1: clock-controller@14800000 { >> + compatible = "samsung,exynos5433-cmu-bus1"; >> + reg = <0x14800000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "aclk_bus1_400"; >> + clocks = <&cmu_top CLK_ACLK_BUS1_400>; >> + }; >> + >> + cmu_bus2: clock-controller@13400000 { >> + compatible = "samsung,exynos5433-cmu-bus2"; >> + reg = <0x13400000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", "aclk_bus2_400"; >> + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; >> + }; >> + >> + cmu_g3d: clock-controller@14aa0000 { >> + compatible = "samsung,exynos5433-cmu-g3d"; >> + reg = <0x14aa0000 0x2000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", "aclk_g3d_400"; >> + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; >> + }; >> + >> + cmu_gscl: clock-controller@13cf0000 { >> + compatible = "samsung,exynos5433-cmu-gscl"; >> + reg = <0x13cf0000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "aclk_gscl_111", >> + "aclk_gscl_333"; >> + clocks = <&xxti>, >> + <&cmu_top CLK_ACLK_GSCL_111>, >> + <&cmu_top CLK_ACLK_GSCL_333>; >> + }; >> + >> + cmu_apollo: clock-controller@11900000 { >> + compatible = "samsung,exynos5433-cmu-apollo"; >> + reg = <0x11900000 0x2000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", "sclk_bus_pll_apollo"; >> + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; >> + }; >> + >> + cmu_atlas: clock-controller@11800000 { >> + compatible = "samsung,exynos5433-cmu-atlas"; >> + reg = <0x11800000 0x2000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", "sclk_bus_pll_atlas"; >> + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; >> + }; >> + >> + cmu_mscl: clock-controller@105d0000 { >> + compatible = "samsung,exynos5433-cmu-mscl"; >> + reg = <0x150d0000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "sclk_jpeg_mscl", >> + "aclk_mscl_400"; >> + clocks = <&xxti>, >> + <&cmu_top CLK_SCLK_JPEG_MSCL>, >> + <&cmu_top CLK_ACLK_MSCL_400>; > > ditto I'll fix it. > >> + }; >> + >> + cmu_mfc: clock-controller@15280000 { >> + compatible = "samsung,exynos5433-cmu-mfc"; >> + reg = <0x15280000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", "aclk_mfc_400"; >> + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; >> + }; >> + >> + cmu_hevc: clock-controller@14f80000 { >> + compatible = "samsung,exynos5433-cmu-hevc"; >> + reg = <0x14f80000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", "aclk_hevc_400"; >> + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; >> + }; >> + >> + cmu_isp: clock-controller@146d0000 { >> + compatible = "samsung,exynos5433-cmu-isp"; >> + reg = <0x146d0000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "aclk_isp_dis_400", >> + "aclk_isp_400"; >> + clocks = <&xxti>, >> + <&cmu_top CLK_ACLK_ISP_DIS_400>, >> + <&cmu_top CLK_ACLK_ISP_400>; > > ditto I'll fix it. > >> + }; >> + >> + cmu_cam0: clock-controller@120d0000 { >> + compatible = "samsung,exynos5433-cmu-cam0"; >> + reg = <0x120d0000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "aclk_cam0_333", >> + "aclk_cam0_400", >> + "aclk_cam0_552"; >> + clocks = <&xxti>, >> + <&cmu_top CLK_ACLK_CAM0_333>, >> + <&cmu_top CLK_ACLK_CAM0_400>, >> + <&cmu_top CLK_ACLK_CAM0_552>; > > ditto I'll fix it. > >> + }; >> + >> + cmu_cam1: clock-controller@145d0000 { >> + compatible = "samsung,exynos5433-cmu-cam1"; >> + reg = <0x145d0000 0x1000>; >> + #clock-cells = <1>; >> + >> + clock-names = "oscclk", >> + "sclk_isp_uart_cam1", >> + "sclk_isp_spi1_cam1", >> + "sclk_isp_spi0_cam1", >> + "aclk_cam1_333", >> + "aclk_cam1_400", >> + "aclk_cam1_552"; >> + clocks = <&xxti>, >> + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, >> + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, >> + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, >> + <&cmu_top CLK_ACLK_CAM1_333>, >> + <&cmu_top CLK_ACLK_CAM1_400>, >> + <&cmu_top CLK_ACLK_CAM1_552>; > > ditto I'll fix it. > >> + }; >> + >> + tmu_atlas0: tmu@10060000 { >> + compatible = "samsung,exynos5433-tmu"; >> + reg = <0x10060000 0x200>; >> + interrupts = <0 95 0>; >> + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, >> + <&cmu_peris CLK_SCLK_TMU0>; >> + clock-names = "tmu_apbif", "tmu_sclk"; >> + #include "exynos5433-tmu-sensor-conf.dtsi" >> + status = "disabled"; >> + }; >> + >> + tmu_atlas1: tmu@10068000 { >> + compatible = "samsung,exynos5433-tmu"; >> + reg = <0x10068000 0x200>; >> + interrupts = <0 96 0>; >> + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, >> + <&cmu_peris CLK_SCLK_TMU0>; >> + clock-names = "tmu_apbif", "tmu_sclk"; >> + #include "exynos5433-tmu-sensor-conf.dtsi" >> + status = "disabled"; >> + }; >> + >> + tmu_g3d: tmu@10070000 { >> + compatible = "samsung,exynos5433-tmu"; >> + reg = <0x10070000 0x200>; >> + interrupts = <0 99 0>; >> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, >> + <&cmu_peris CLK_SCLK_TMU1>; >> + clock-names = "tmu_apbif", "tmu_sclk"; >> + #include "exynos5433-tmu-g3d-sensor-conf.dtsi" >> + status = "disabled"; >> + }; >> + >> + tmu_apollo: tmu@10078000 { >> + compatible = "samsung,exynos5433-tmu"; >> + reg = <0x10078000 0x200>; >> + interrupts = <0 115 0>; >> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, >> + <&cmu_peris CLK_SCLK_TMU1>; >> + clock-names = "tmu_apbif", "tmu_sclk"; >> + #include "exynos5433-tmu-sensor-conf.dtsi" >> + status = "disabled"; >> + }; >> + >> + tmu_isp: tmu@1007c000 { >> + compatible = "samsung,exynos5433-tmu"; >> + reg = <0x1007c000 0x200>; >> + interrupts = <0 94 0>; >> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, >> + <&cmu_peris CLK_SCLK_TMU1>; >> + clock-names = "tmu_apbif", "tmu_sclk"; >> + #include "exynos5433-tmu-sensor-conf.dtsi" >> + status = "disabled"; >> + }; >> + >> + mct@101c0000 { >> + compatible = "samsung,exynos5433-mct", > > Why 5433-mct compatible? It is not necessary. I'll remove it. > >> + "samsung,exynos4210-mct"; >> + reg = <0x101c0000 0x800>; >> + interrupts = <0 102 0>, <0 103 0>, <0 104 0>, <0 105 0>, >> + <0 106 0>, <0 107 0>, <0 108 0>, <0 109 0>, >> + <0 110 0>, <0 111 0>, <0 112 0>, <0 113 0>; >> + clocks = <&xxti>, >> + <&cmu_peris CLK_PCLK_MCT>; >> + clock-names = "fin_pll", "mct"; >> + }; >> + >> + pinctrl_alive: pinctrl@10580000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x10580000 0x1A20>, <0x11090000 0x100>; > > Can you switch to lowercase hex? OK. > >> + >> + wakeup-interrupt-controller { >> + compatible = "samsung,exynos7-wakeup-eint"; >> + interrupts = <0 16 0>; >> + }; >> + }; >> + >> + pinctrl_aud: pinctrl@114b0000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x114b0000 0x1000>; >> + interrupts = <0 68 0>; >> + }; >> + >> + pinctrl_cpif: pinctrl@10fe0000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x10fe0000 0x1000>; >> + interrupts = <0 179 0>; >> + }; >> + >> + pinctrl_ese: pinctrl@14ca0000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x14ca0000 0x1000>; >> + interrupts = <0 413 0>; >> + }; >> + >> + pinctrl_finger: pinctrl@14cb0000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x14cb0000 0x1000>; >> + interrupts = <0 414 0>; >> + }; >> + >> + pinctrl_fsys: pinctrl@15690000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x15690000 0x1000>; >> + interrupts = <0 229 0>; >> + }; >> + >> + pinctrl_imem: pinctrl@11090000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x11090000 0x1000>; >> + interrupts = <0 325 0>; >> + }; >> + >> + pinctrl_nfc: pinctrl@14cd0000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x14cd0000 0x1000>; >> + interrupts = <0 441 0>; >> + }; >> + >> + pinctrl_peric: pinctrl@14cc0000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x14cc0000 0x1100>; >> + interrupts = <0 440 0>; >> + }; >> + >> + pinctrl_touch: pinctrl@14ce0000 { >> + compatible = "samsung,exynos5433-pinctrl"; >> + reg = <0x14ce0000 0x1100>; >> + interrupts = <0 442 0>; >> + }; >> + >> + rtc: rtc@10590000 { >> + compatible = "samsung,exynos3250-rtc"; >> + reg = <0x10590000 0x100>; >> + interrupts = <0 385 0>, <0 386 0>; >> + status = "disabled"; >> + }; >> + >> + pmu_system_controller: system-controller@105c0000 { >> + compatible = "samsung,exynos5433-pmu", "syscon"; >> + reg = <0x105c0000 0x5008>; >> + #clock-cells = <1>; >> + clock-names = "clkout16"; >> + clocks = <&xxti>; >> + }; >> + >> + gic: interrupt-controller@11001000 { >> + compatible = "arm,gic-400"; >> + #interrupt-cells = <3>; >> + interrupt-controller; >> + reg = <0x11001000 0x1000>, >> + <0x11002000 0x2000>, >> + <0x11004000 0x2000>, >> + <0x11006000 0x2000>; >> + interrupts = <1 9 0xf04>; >> + }; >> + >> + lpass: lpass@11400000 { >> + compatible = "samsung,exynos5433-lpass"; >> + reg = <0x11400000 0x100>; >> + samsung,pmu-syscon = <&pmu_system_controller>; >> + status = "disabled"; >> + }; >> + >> + i2s0: i2s0@11440000 { >> + compatible = "samsung,exynos7-i2s"; >> + reg = <0x11440000 0x100>; >> + dmas = <&adma 0 &adma 2>; >> + dma-names = "tx", "rx"; >> + interrupts = <0 70 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, >> + <&cmu_aud CLK_SCLK_AUD_I2S>, >> + <&cmu_aud CLK_SCLK_I2S_BCLK>; >> + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2s0_bus>; >> + status = "disabled"; >> + }; >> + >> + mipi_phy: video-phy@105C0708 { >> + compatible = "samsung,exynos5433-mipi-video-phy"; >> + #phy-cells = <1>; >> + samsung,pmu-syscon = <&pmu_system_controller>; >> + samsung,cam0-sysreg = <&syscon_cam0>; >> + samsung,cam1-sysreg = <&syscon_cam1>; >> + samsung,disp-sysreg = <&syscon_disp>; >> + }; >> + >> + decon: decon@13800000 { >> + compatible = "samsung,exynos5433-decon"; >> + reg = <0x13800000 0x2104>; >> + clocks = <&cmu_disp CLK_PCLK_DECON>, >> + <&cmu_disp CLK_ACLK_DECON>, >> + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, >> + <&cmu_disp CLK_ACLK_XIU_DECON0X>, >> + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, >> + <&cmu_disp CLK_SCLK_DECON_VCLK>, >> + <&cmu_disp CLK_SCLK_DECON_ECLK>; >> + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", >> + "aclk_xiu_decon0x", "pclk_smmu_decon0x", >> + "sclk_decon_vclk", "sclk_decon_eclk"; >> + interrupt-names = "fifo", "vsync", "lcd_sys"; >> + interrupts = <0 201 0>, <0 202 0>, <0 203 0>; >> + samsung,disp-sysreg = <&syscon_disp>; >> + status = "disabled"; >> + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; >> + iommu-names = "m0", "m1"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + decon_to_mic: endpoint { >> + remote-endpoint = <&mic_to_decon>; >> + }; >> + }; >> + }; >> + }; >> + >> + dsi: dsi@13900000 { >> + compatible = "samsung,exynos5433-mipi-dsi"; >> + reg = <0x13900000 0xC0>; >> + interrupts = <0 205 0>; >> + phys = <&mipi_phy 1>; >> + phy-names = "dsim"; >> + clocks = <&cmu_disp CLK_PCLK_DSIM0>, >> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, >> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, >> + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, >> + <&cmu_disp CLK_SCLK_DSIM0>; >> + clock-names = "bus_clk", >> + "phyclk_mipidphy0_bitclkdiv8", >> + "phyclk_mipidphy0_rxclkesc0", >> + "sclk_rgb_vclk_to_dsim0", >> + "sclk_mipi"; >> + status = "disabled"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + dsi_to_mic: endpoint { >> + remote-endpoint = <&mic_to_dsi>; >> + }; >> + }; >> + }; >> + }; >> + >> + mic: mic@13930000 { >> + compatible = "samsung,exynos5433-mic"; >> + reg = <0x13930000 0x48>; >> + clocks = <&cmu_disp CLK_PCLK_MIC0>, >> + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; >> + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; >> + samsung,disp-syscon = <&syscon_disp>; >> + status = "disabled"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + mic_to_decon: endpoint { >> + remote-endpoint = <&decon_to_mic>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + mic_to_dsi: endpoint { >> + remote-endpoint = <&dsi_to_mic>; >> + }; >> + }; >> + }; >> + }; >> + >> + syscon_disp: syscon@13B80000 { > > Here and everywhere below - lowercase hex please. OK. I'll modify them. > >> + compatible = "samsung,exynos5433-sysreg", "syscon"; >> + reg = <0x13B80000 0x1010>; >> + }; >> + >> + syscon_cam0: syscon@120F0000 { >> + compatible = "samsung,exynos5433-sysreg", "syscon"; >> + reg = <0x120F0000 0x1020>; >> + }; >> + >> + syscon_cam1: syscon@145F0000 { >> + compatible = "samsung,exynos5433-sysreg", "syscon"; >> + reg = <0x145F0000 0x1038>; >> + }; >> + >> + sysmmu_gscl0: sysmmu@0x13C80000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x13C80000 0x1000>; >> + interrupts = <0 288 0>; >> + clock-names = "aclk", "pclk"; >> + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>, >> + <&cmu_gscl CLK_PCLK_SMMU_GSCL0>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_gscl1: sysmmu@0x13C90000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x13C90000 0x1000>; >> + interrupts = <0 290 0>; >> + clock-names = "aclk", "pclk"; >> + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>, >> + <&cmu_gscl CLK_PCLK_SMMU_GSCL1>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_gscl2: sysmmu@0x13CA0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x13CA0000 0x1000>; >> + interrupts = <0 292 0>; >> + clock-names = "aclk", "pclk"; >> + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>, >> + <&cmu_gscl CLK_PCLK_SMMU_GSCL2>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_decon0x: sysmmu@0x13A00000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x13A00000 0x1000>; >> + interrupts = <0 192 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, >> + <&cmu_disp CLK_ACLK_SMMU_DECON0X>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_decon1x: sysmmu@0x13A10000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x13A10000 0x1000>; >> + interrupts = <0 194 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, >> + <&cmu_disp CLK_ACLK_SMMU_DECON1X>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_tv0x: sysmmu@0x13A20000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x13A20000 0x1000>; >> + interrupts = <0 214 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, >> + <&cmu_disp CLK_ACLK_SMMU_TV0X>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_tv1x: sysmmu@0x13A30000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x13A30000 0x1000>; >> + interrupts = <0 216 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, >> + <&cmu_disp CLK_ACLK_SMMU_TV1X>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_mfc_0: sysmmu@0x15200000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x15200000 0x1000>; >> + interrupts = <0 352 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, >> + <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_mfc_1: sysmmu@0x15210000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x15210000 0x1000>; >> + interrupts = <0 354 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, >> + <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_jpeg: sysmmu@0x15060000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x15060000 0x1000>; >> + interrupts = <0 408 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, >> + <&cmu_mscl CLK_ACLK_SMMU_JPEG>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_flite_a: sysmmu@0x12150000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x12150000 0x1000>; >> + interrupts = <0 128 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_A>, >> + <&cmu_cam0 CLK_ACLK_SMMU_LITE_A>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_flite_b: sysmmu@0x12160000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x12160000 0x1000>; >> + interrupts = <0 130 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_B>, >> + <&cmu_cam0 CLK_ACLK_SMMU_LITE_B>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_flite_d: sysmmu@0x12170000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x12170000 0x1000>; >> + interrupts = <0 132 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_D>, >> + <&cmu_cam0 CLK_ACLK_SMMU_LITE_D>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_3aa0: sysmmu@0x12180000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x12180000 0x1000>; >> + interrupts = <0 137 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_cam0 CLK_PCLK_SMMU_3AA0>, >> + <&cmu_cam0 CLK_ACLK_SMMU_3AA0>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_3aa1: sysmmu@0x121A0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x121A0000 0x1000>; >> + interrupts = <0 147 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_cam0 CLK_PCLK_SMMU_3AA1>, >> + <&cmu_cam0 CLK_ACLK_SMMU_3AA1>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_flite_c: sysmmu@0x142B0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x142B0000 0x1000>; >> + interrupts = <0 160 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_cam1 CLK_PCLK_SMMU_LITE_C>, >> + <&cmu_cam1 CLK_ACLK_SMMU_LITE_C>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_fd: sysmmu@0x142C0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x142C0000 0x1000>; >> + interrupts = <0 162 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_cam1 CLK_PCLK_SMMU_FD>, >> + <&cmu_cam1 CLK_ACLK_SMMU_FD>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_cpu: sysmmu@0x142D0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x142D0000 0x1000>; >> + interrupts = <0 169 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_ISPCPU>, >> + <&cmu_isp CLK_ACLK_SMMU_ISPCPU>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_isp: sysmmu@0x14320000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x14320000 0x1000>; >> + interrupts = <0 346 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_ISP>, >> + <&cmu_isp CLK_ACLK_SMMU_ISP>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_drc: sysmmu@0x14330000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x14330000 0x1000>; >> + interrupts = <0 338 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_DRC>, >> + <&cmu_isp CLK_ACLK_SMMU_DRC>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_scc: sysmmu@0x14340000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x14340000 0x1000>; >> + interrupts = <0 340 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_SCALERC>, >> + <&cmu_isp CLK_ACLK_SMMU_SCALERC>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_dis0: sysmmu@0x143A0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x143A0000 0x1000>; >> + interrupts = <0 342 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_DIS0>, >> + <&cmu_isp CLK_ACLK_SMMU_DIS0>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_dis1: sysmmu@0x143B0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x143B0000 0x1000>; >> + interrupts = <0 344 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_DIS1>, >> + <&cmu_isp CLK_ACLK_SMMU_DIS1>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_scp: sysmmu@0x143C0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x143C0000 0x1000>; >> + interrupts = <0 336 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_SCALERP>, >> + <&cmu_isp CLK_ACLK_SMMU_SCALERP>; >> + #iommu-cells = <0>; >> + }; >> + >> + sysmmu_fimc_3dnr: sysmmu@0x143D0000 { >> + compatible = "samsung,exynos-sysmmu"; >> + reg = <0x143D0000 0x1000>; >> + interrupts = <0 349 0>; >> + clock-names = "pclk", "aclk"; >> + clocks = <&cmu_isp CLK_PCLK_SMMU_3DNR>, >> + <&cmu_isp CLK_ACLK_SMMU_3DNR>; >> + #iommu-cells = <0>; >> + }; >> + >> + serial_0: serial@14c10000 { >> + compatible = "samsung,exynos5433-uart"; >> + reg = <0x14c10000 0x100>; >> + interrupts = <0 421 0>; >> + clocks = <&cmu_peric CLK_PCLK_UART0>, >> + <&cmu_peric CLK_SCLK_UART0>; >> + clock-names = "uart", "clk_uart_baud0"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart0_bus>; >> + status = "disabled"; >> + }; >> + >> + serial_1: serial@14c20000 { >> + compatible = "samsung,exynos5433-uart"; >> + reg = <0x14c20000 0x100>; >> + interrupts = <0 422 0>; >> + clocks = <&cmu_peric CLK_PCLK_UART1>, >> + <&cmu_peric CLK_SCLK_UART1>; >> + clock-names = "uart", "clk_uart_baud0"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart1_bus>; >> + status = "disabled"; >> + }; >> + >> + serial_2: serial@14c30000 { >> + compatible = "samsung,exynos5433-uart"; >> + reg = <0x14c30000 0x100>; >> + interrupts = <0 423 0>; >> + clocks = <&cmu_peric CLK_PCLK_UART2>, >> + <&cmu_peric CLK_SCLK_UART2>; >> + clock-names = "uart", "clk_uart_baud0"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart2_bus>; > > Just like rest of serials, this should be also disabled. OK. I'll add it. > >> + }; >> + >> + serial_3: serial@11460000 { >> + compatible = "samsung,exynos5433-uart"; >> + reg = <0x11460000 0x100>; >> + interrupts = <0 67 0>; >> + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, >> + <&cmu_aud CLK_SCLK_AUD_UART>; >> + clock-names = "uart", "clk_uart_baud0"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart_aud_bus>; >> + status = "disabled"; >> + }; >> + >> + spi_0: spi@14d20000 { >> + compatible = "samsung,exynos5433-spi"; >> + reg = <0x14d20000 0x100>; >> + interrupts = <0 432 0>; >> + dmas = <&pdma0 9>, <&pdma0 8>; >> + dma-names = "tx", "rx"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cmu_peric CLK_PCLK_SPI0>, >> + <&cmu_peric CLK_SCLK_SPI0>, >> + <&cmu_peric CLK_SCLK_IOCLK_SPI0>; >> + clock-names = "spi", "spi_busclk0", "spi_ioclk"; >> + samsung,spi-src-clk = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&spi0_bus>; >> + num-cs = <1>; >> + status = "disabled"; >> + }; >> + >> + spi_1: spi@14d30000 { >> + compatible = "samsung,exynos5433-spi"; >> + reg = <0x14d30000 0x100>; >> + interrupts = <0 433 0>; >> + dmas = <&pdma0 11>, <&pdma0 10>; >> + dma-names = "tx", "rx"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cmu_peric CLK_PCLK_SPI1>, >> + <&cmu_peric CLK_SCLK_SPI1>, >> + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; >> + clock-names = "spi", "spi_busclk0", "spi_ioclk"; >> + samsung,spi-src-clk = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&spi1_bus>; >> + num-cs = <1>; >> + status = "disabled"; >> + }; >> + >> + spi_2: spi@14d40000 { >> + compatible = "samsung,exynos5433-spi"; >> + reg = <0x14d40000 0x100>; >> + interrupts = <0 434 0>; >> + dmas = <&pdma0 13>, <&pdma0 12>; >> + dma-names = "tx", "rx"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cmu_peric CLK_PCLK_SPI2>, >> + <&cmu_peric CLK_SCLK_SPI2>, >> + <&cmu_peric CLK_SCLK_IOCLK_SPI2>; >> + clock-names = "spi", "spi_busclk0", "spi_ioclk"; >> + samsung,spi-src-clk = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&spi2_bus>; >> + num-cs = <1>; >> + status = "disabled"; >> + }; >> + >> + spi_3: spi@14d50000 { >> + compatible = "samsung,exynos5433-spi"; >> + reg = <0x14d50000 0x100>; >> + interrupts = <0 447 0>; >> + dmas = <&pdma0 23>, <&pdma0 22>; >> + dma-names = "tx", "rx"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cmu_peric CLK_PCLK_SPI3>, >> + <&cmu_peric CLK_SCLK_SPI3>, >> + <&cmu_peric CLK_SCLK_IOCLK_SPI3>; >> + clock-names = "spi", "spi_busclk0", "spi_ioclk"; >> + samsung,spi-src-clk = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&spi3_bus>; >> + num-cs = <1>; >> + status = "disabled"; >> + }; >> + >> + spi_4: spi@14d00000 { >> + compatible = "samsung,exynos5433-spi"; >> + reg = <0x14d00000 0x100>; >> + interrupts = <0 412 0>; >> + dmas = <&pdma0 25>, <&pdma0 24>; >> + dma-names = "tx", "rx"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cmu_peric CLK_PCLK_SPI4>, >> + <&cmu_peric CLK_SCLK_SPI4>, >> + <&cmu_peric CLK_SCLK_IOCLK_SPI4>; >> + clock-names = "spi", "spi_busclk0", "spi_ioclk"; >> + samsung,spi-src-clk = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&spi4_bus>; >> + num-cs = <1>; >> + status = "disabled"; >> + }; >> + >> + adc: adc@14d10000 { >> + compatible = "samsung,exynos7-adc"; >> + reg = <0x14d10000 0x100>; >> + interrupts = <0 438 0>; >> + clock-names = "adc"; >> + clocks = <&cmu_peric CLK_PCLK_ADCIF>; >> + #io-channel-cells = <1>; >> + io-channel-ranges; >> + status = "disabled"; >> + }; >> + >> + pwm: pwm@14dd0000 { >> + compatible = "samsung,exynos4210-pwm"; >> + reg = <0x14dd0000 0x100>; >> + interrupts = <0 416 0>, <0 417 0>, >> + <0 418 0>, <0 419 0>, <0 420 0>; >> + samsung,pwm-outputs = <0>, <1>, <2>, <3>; >> + clocks = <&cmu_peric CLK_PCLK_PWM>; >> + clock-names = "timers"; >> + #pwm-cells = <3>; >> + status = "disabled"; >> + }; >> + >> + hsi2c_0: hsi2c@14e40000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14e40000 0x1000>; >> + interrupts = <0 428 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c0_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C0>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_1: hsi2c@14e50000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14e50000 0x1000>; >> + interrupts = <0 429 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c1_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C1>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_2: hsi2c@14e60000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14e60000 0x1000>; >> + interrupts = <0 430 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c2_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C2>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_3: hsi2c@14e70000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14e70000 0x1000>; >> + interrupts = <0 431 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c3_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C3>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_4: hsi2c@14ec0000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14ec0000 0x1000>; >> + interrupts = <0 424 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c4_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C4>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_5: hsi2c@14ed0000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14ed0000 0x1000>; >> + interrupts = <0 425 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c5_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C5>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_6: hsi2c@14ee0000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14ee0000 0x1000>; >> + interrupts = <0 426 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c6_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C6>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_7: hsi2c@14ef0000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14ef0000 0x1000>; >> + interrupts = <0 427 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c7_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C7>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_8: hsi2c@14d90000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14d90000 0x1000>; >> + interrupts = <0 443 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c8_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C8>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_9: hsi2c@14da0000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14da0000 0x1000>; >> + interrupts = <0 444 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c9_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C9>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_10: hsi2c@14de0000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14de0000 0x1000>; >> + interrupts = <0 445 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c10_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C10>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + hsi2c_11: hsi2c@14df0000 { >> + compatible = "samsung,exynos7-hsi2c"; >> + reg = <0x14df0000 0x1000>; >> + interrupts = <0 446 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hs_i2c11_bus>; >> + clocks = <&cmu_peric CLK_PCLK_HSI2C11>; >> + clock-names = "hsi2c"; >> + status = "disabled"; >> + }; >> + >> + usbdrd30: usb@15400000 { >> + compatible = "samsung,exynos5250-dwusb3"; >> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, >> + <&cmu_fsys CLK_SCLK_USBDRD30>; >> + clock-names = "usbdrd30", "usbdrd30_susp_clk"; >> + assigned-clocks = >> + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, >> + <&cmu_top CLK_MOUT_SCLK_USBDRD30>, >> + <&cmu_top CLK_DIV_SCLK_USBDRD30>; >> + assigned-clock-parents = >> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, >> + <&cmu_top CLK_MOUT_BUS_PLL_USER>; >> + assigned-clock-rates = <0>, <0>, <66700000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + status = "disabled"; >> + >> + dwc3 { >> + compatible = "snps,dwc3"; >> + reg = <0x15400000 0x10000>; >> + interrupts = <0 231 0>; >> + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; >> + phy-names = "usb2-phy", "usb3-phy"; >> + }; >> + >> + }; >> + >> + usbdrd30_phy: phy@15500000 { >> + compatible = "samsung,exynos5433-usbdrd-phy"; >> + reg = <0x15500000 0x100>; >> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>, >> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, >> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>, >> + <&cmu_fsys CLK_SCLK_USBDRD30>; >> + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp"; >> + assigned-clocks = >> + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, >> + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>; >> + assigned-clock-parents = >> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, >> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>; >> + #phy-cells = <1>; >> + samsung,pmu-syscon = <&pmu_system_controller>; >> + status = "disabled"; >> + }; >> + >> + usbhost30_phy: phy@15580000 { >> + compatible = "samsung,exynos5433-usbdrd-phy"; >> + reg = <0x15580000 0x100>; >> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>, >> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, >> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>, >> + <&cmu_fsys CLK_SCLK_USBHOST30>; >> + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", >> + "itp"; >> + assigned-clocks = >> + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, >> + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>; >> + assigned-clock-parents = >> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, >> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; >> + #phy-cells = <1>; >> + samsung,pmu-syscon = <&pmu_system_controller>; >> + status = "disabled"; >> + }; >> + >> + usbhost30: usb@15a00000 { >> + compatible = "samsung,exynos5250-dwusb3"; >> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, >> + <&cmu_fsys CLK_SCLK_USBHOST30>; >> + clock-names = "usbdrd30", "usbdrd30_susp_clk"; >> + assigned-clocks = >> + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, >> + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, >> + <&cmu_top CLK_DIV_SCLK_USBHOST30>; >> + assigned-clock-parents = >> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, >> + <&cmu_top CLK_MOUT_BUS_PLL_USER>; >> + assigned-clock-rates = <0>, <0>, <66700000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + status = "disabled"; >> + >> + usbdrd_dwc3_0: dwc3 { >> + compatible = "snps,dwc3"; >> + reg = <0x15a00000 0x10000>; >> + interrupts = <0 244 0>; >> + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; >> + phy-names = "usb2-phy", "usb3-phy"; >> + }; >> + }; >> + >> + mshc_0: mshc@15540000 { >> + compatible = "samsung,exynos7-dw-mshc-smu"; >> + interrupts = <0 225 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x15540000 0x2000>; >> + clocks = <&cmu_fsys CLK_ACLK_MMC0>, >> + <&cmu_fsys CLK_SCLK_MMC0>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x40>; >> + status = "disabled"; >> + }; >> + >> + mshc_1: mshc@15550000 { >> + compatible = "samsung,exynos7-dw-mshc-smu"; >> + interrupts = <0 226 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x15550000 0x2000>; >> + clocks = <&cmu_fsys CLK_ACLK_MMC1>, >> + <&cmu_fsys CLK_SCLK_MMC1>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x40>; >> + status = "disabled"; >> + }; >> + >> + mshc_2: mshc@15560000 { >> + compatible = "samsung,exynos7-dw-mshc-smu"; >> + interrupts = <0 227 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x15560000 0x2000>; >> + clocks = <&cmu_fsys CLK_ACLK_MMC2>, >> + <&cmu_fsys CLK_SCLK_MMC2>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x40>; >> + status = "disabled"; >> + }; >> + >> + amba { >> + compatible = "arm,amba-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + pdma0: pdma@15610000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x15610000 0x1000>; >> + interrupts = <0 228 0>; >> + clocks = <&cmu_fsys CLK_PDMA0>; >> + clock-names = "apb_pclk"; >> + #dma-cells = <1>; >> + #dma-channels = <8>; >> + #dma-requests = <32>; >> + }; >> + >> + pdma1: pdma@15600000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x15600000 0x1000>; >> + interrupts = <0 246 0>; >> + clocks = <&cmu_fsys CLK_PDMA1>; >> + clock-names = "apb_pclk"; >> + #dma-cells = <1>; >> + #dma-channels = <8>; >> + #dma-requests = <32>; >> + }; >> + >> + adma: adma@11420000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x11420000 0x1000>; >> + interrupts = <0 73 0>; >> + clocks = <&cmu_aud CLK_ACLK_DMAC>; >> + clock-names = "apb_pclk"; >> + #dma-cells = <1>; >> + #dma-channels = <8>; >> + #dma-requests = <32>; >> + }; >> + }; >> + }; >> + >> + timer: timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <1 13 0xff04>, >> + <1 14 0xff04>, >> + <1 11 0xff04>, >> + <1 10 0xff04>; > > Please use human friendly names from > dt-bindings/interrupt-controller/arm-gic.h. Something like this: > https://git.kernel.org/cgit/linux/kernel/git/krzk/linux.git/commit/?h=next/dt64&id=36d1c9cd07cd6a065f1dde3cbbfe3a9867d693a4 Thanks for reference. I'll modify it. Best Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sylwester, On 2016년 08월 16일 19:50, Sylwester Nawrocki wrote: > Hi Chanwoo, > > On 08/16/2016 08:35 AM, Chanwoo Choi wrote: >> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on >> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports >> PSCI (Power State Coordination Interface) v0.1. > >> --- >> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1580 ++++++++++++++++++++ > >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi >> b/arch/arm64/boot/dts/exynos/exynos5433.dtsi >> new file mode 100644 >> index 000000000000..2a5b05744533 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi >> @@ -0,0 +1,1580 @@ > >> + >> +/ { >> + compatible = "samsung,exynos5433"; >> + #address-cells = <2>; >> + #size-cells = <2>; > >> + soc: soc { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0x0 0x0 0x0 0x18000000>; > >> + lpass: lpass@11400000 { >> + compatible = "samsung,exynos5433-lpass"; >> + reg = <0x11400000 0x100>; >> + samsung,pmu-syscon = <&pmu_system_controller>; >> + status = "disabled"; >> + }; >> + >> + i2s0: i2s0@11440000 { >> + compatible = "samsung,exynos7-i2s"; >> + reg = <0x11440000 0x100>; >> + dmas = <&adma 0 &adma 2>; >> + dma-names = "tx", "rx"; >> + interrupts = <0 70 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, >> + <&cmu_aud CLK_SCLK_AUD_I2S>, >> + <&cmu_aud CLK_SCLK_I2S_BCLK>; >> + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2s0_bus>; >> + status = "disabled"; >> + }; > >> + serial_3: serial@11460000 { >> + compatible = "samsung,exynos5433-uart"; >> + reg = <0x11460000 0x100>; >> + interrupts = <0 67 0>; >> + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, >> + <&cmu_aud CLK_SCLK_AUD_UART>; >> + clock-names = "uart", "clk_uart_baud0"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart_aud_bus>; >> + status = "disabled"; >> + }; >> + > >> + amba { >> + compatible = "arm,amba-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; > >> + adma: adma@11420000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x11420000 0x1000>; >> + interrupts = <0 73 0>; >> + clocks = <&cmu_aud CLK_ACLK_DMAC>; >> + clock-names = "apb_pclk"; >> + #dma-cells = <1>; >> + #dma-channels = <8>; >> + #dma-requests = <32>; >> + }; >> + }; >> + }; > > The latest Exynos5433 Audio Subsystem bindings look like this > https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.9/mfd/exynos-lpass-v5&id=104cc6ad3ecc7c4c8ecf73663b93eb48b78f35aa > i.e. adma@11420000, i2s0@11440000, serial@11460000 should be subnodes of > the lpass@11400000 node. OK. I'll use your latest patches for sound and then test it again. Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Aug 16, 2016 at 09:59:26PM +0900, Chanwoo Choi wrote: > >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > >> new file mode 100644 > >> index 000000000000..175121db367e > >> --- /dev/null > >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > >> @@ -0,0 +1,306 @@ > >> +/* > >> + * Device tree sources for Exynos5433 thermal zone > >> + * > >> + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> > >> + * > >> + * This program is free software; you can redistribute it and/or modify > >> + * it under the terms of the GNU General Public License version 2 as > >> + * published by the Free Software Foundation. > >> + */ > >> + > >> +#include <dt-bindings/thermal/thermal.h> > >> + > >> +/ { > >> +thermal-zones { > >> + atlas0_thermal: atlas0-thermal { > >> + thermal-sensors = <&tmu_atlas0>; > >> + polling-delay-passive = <0>; > >> + polling-delay = <0>; > >> + trips { > >> + atlas0_alert_0: atlas0-alert-0 { > >> + temperature = <50000>; /* millicelsius */ > >> + hysteresis = <1000>; /* millicelsius */ > >> + type = "active"; > >> + }; > >> + atlas0_alert_1: atlas0-alert-1 { > >> + temperature = <55000>; /* millicelsius */ > >> + hysteresis = <1000>; /* millicelsius */ > >> + type = "active"; > >> + }; > >> + atlas0_alert_2: atlas0-alert-2 { > >> + temperature = <60000>; /* millicelsius */ > >> + hysteresis = <1000>; /* millicelsius */ > >> + type = "active"; > >> + }; > >> + atlas0_alert_3: atlas0-alert-3 { > >> + temperature = <70000>; /* millicelsius */ > >> + hysteresis = <1000>; /* millicelsius */ > >> + type = "active"; > >> + }; > >> + atlas0_alert_4: atlas0-alert-4 { > >> + temperature = <80000>; /* millicelsius */ > >> + hysteresis = <1000>; /* millicelsius */ > >> + type = "active"; > >> + }; > >> + atlas0_alert_5: atlas0-alert-5 { > >> + temperature = <90000>; /* millicelsius */ > >> + hysteresis = <1000>; /* millicelsius */ > >> + type = "active"; > >> + }; > >> + atlas0_alert_6: atlas0-alert-6 { > >> + temperature = <95000>; /* millicelsius */ > >> + hysteresis = <1000>; /* millicelsius */ > >> + type = "active"; > >> + }; > > > > No critical trip? I think it might be useful to shutdown the system in a > > user-friendly way. > > When I use the critical trip, the following event occur[1]. > But, I guess that this temperature is not correct temperature > because after completing the kernel booting, the temperature of big.LITTLE/G3D > are normal when checking the /sys/class/thermal/thermal_zoneX/temp right after booting. > - Maintain a uniform temperature(38 ~ 45 millicelsius) right after kernel booting. > > I guess that the critical interrupt may occur before initializing the exynos tmu. > But, I don't spend the many time to check the exynos-tmu.c driver. > > [1] > [ 445.122122] thermal thermal_zone0: critical temperature reached(108 C),shutting down > [ 445.122399] exynos-tmu 10060000.tmu: Temperature sensor ID: 0xa > [ 445.122588] exynos-tmu 10060000.tmu: Calibration type is 2-point calibration > [ 445.127942] reboot: Failed to start orderly shutdown: forcing the issue > [ 445.134586] Emergency Sync complete > [ 1.097954] reboot: Power down I understand. Apparently the exynos-tmu driver needs some fixes for this race. Skipping critical then makes sense. > > > > >> + }; > >> + > >> + cooling-maps { > >> + map0 { > >> + /* Set maximum frequency as 1800MHz */ > >> + trip = <&atlas0_alert_0>; > >> + cooling-device = <&cpu4 1 1>; > > > > Out of curiosity: why choosing specific cooling level (so quite fast > > the device will slow down) instead of letting cooling framework to > > decide how much to cool? Any particular reason behind this? > > This cooling level is just default value in cooling-maps. > This value is able to overwrite on dts file. > > And the thermal subsystem support the cpu cooling features > with 'cooling-maps'. > > Also, when I tested the performance and stress test > with GLBenchmark, the temperature of big.LITTLE cores/G3D > reach easily the critical temperature with 8 online cores. > So, I add the cooling level aggressively to protect > the system fault of CPU and GPU and to maintain > the system state. I was asking why you do not let cooling framework decide which cooling level to use but instead you force a specific cooling level. Maybe code will be a better example. Why not use: map0 { /* Set maximum frequency as 1800MHz */ trip = <&atlas0_alert_0>; cooling-device = <&cpu4 0 1>; } map1 { /* Set maximum frequency as 1700MHz */ trip = <&atlas0_alert_1>; cooling-device = <&cpu4 1 2>; }; For higher frequencies it makes even more sense: map6 { /* Set maximum frequency as 800MHz */ trip = <&atlas0_alert_6>; cooling-device = <&cpu4 7 11>; }; which allows the system to use suitable cooling level to maintain the balance between performance and temperature dissipance, instead of some fixed cooling level which might not be accurate to the system load. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Krzysztof, On 2016년 08월 17일 02:51, Krzysztof Kozlowski wrote: > On Tue, Aug 16, 2016 at 09:59:26PM +0900, Chanwoo Choi wrote: >>>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi >>>> new file mode 100644 >>>> index 000000000000..175121db367e >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi >>>> @@ -0,0 +1,306 @@ >>>> +/* >>>> + * Device tree sources for Exynos5433 thermal zone >>>> + * >>>> + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> >>>> + * >>>> + * This program is free software; you can redistribute it and/or modify >>>> + * it under the terms of the GNU General Public License version 2 as >>>> + * published by the Free Software Foundation. >>>> + */ >>>> + >>>> +#include <dt-bindings/thermal/thermal.h> >>>> + >>>> +/ { >>>> +thermal-zones { >>>> + atlas0_thermal: atlas0-thermal { >>>> + thermal-sensors = <&tmu_atlas0>; >>>> + polling-delay-passive = <0>; >>>> + polling-delay = <0>; >>>> + trips { >>>> + atlas0_alert_0: atlas0-alert-0 { >>>> + temperature = <50000>; /* millicelsius */ >>>> + hysteresis = <1000>; /* millicelsius */ >>>> + type = "active"; >>>> + }; >>>> + atlas0_alert_1: atlas0-alert-1 { >>>> + temperature = <55000>; /* millicelsius */ >>>> + hysteresis = <1000>; /* millicelsius */ >>>> + type = "active"; >>>> + }; >>>> + atlas0_alert_2: atlas0-alert-2 { >>>> + temperature = <60000>; /* millicelsius */ >>>> + hysteresis = <1000>; /* millicelsius */ >>>> + type = "active"; >>>> + }; >>>> + atlas0_alert_3: atlas0-alert-3 { >>>> + temperature = <70000>; /* millicelsius */ >>>> + hysteresis = <1000>; /* millicelsius */ >>>> + type = "active"; >>>> + }; >>>> + atlas0_alert_4: atlas0-alert-4 { >>>> + temperature = <80000>; /* millicelsius */ >>>> + hysteresis = <1000>; /* millicelsius */ >>>> + type = "active"; >>>> + }; >>>> + atlas0_alert_5: atlas0-alert-5 { >>>> + temperature = <90000>; /* millicelsius */ >>>> + hysteresis = <1000>; /* millicelsius */ >>>> + type = "active"; >>>> + }; >>>> + atlas0_alert_6: atlas0-alert-6 { >>>> + temperature = <95000>; /* millicelsius */ >>>> + hysteresis = <1000>; /* millicelsius */ >>>> + type = "active"; >>>> + }; >>> >>> No critical trip? I think it might be useful to shutdown the system in a >>> user-friendly way. >> >> When I use the critical trip, the following event occur[1]. >> But, I guess that this temperature is not correct temperature >> because after completing the kernel booting, the temperature of big.LITTLE/G3D >> are normal when checking the /sys/class/thermal/thermal_zoneX/temp right after booting. >> - Maintain a uniform temperature(38 ~ 45 millicelsius) right after kernel booting. >> >> I guess that the critical interrupt may occur before initializing the exynos tmu. >> But, I don't spend the many time to check the exynos-tmu.c driver. >> >> [1] >> [ 445.122122] thermal thermal_zone0: critical temperature reached(108 C),shutting down >> [ 445.122399] exynos-tmu 10060000.tmu: Temperature sensor ID: 0xa >> [ 445.122588] exynos-tmu 10060000.tmu: Calibration type is 2-point calibration >> [ 445.127942] reboot: Failed to start orderly shutdown: forcing the issue >> [ 445.134586] Emergency Sync complete >> [ 1.097954] reboot: Power down > > I understand. Apparently the exynos-tmu driver needs some fixes for > this race. Skipping critical then makes sense. > >> >>> >>>> + }; >>>> + >>>> + cooling-maps { >>>> + map0 { >>>> + /* Set maximum frequency as 1800MHz */ >>>> + trip = <&atlas0_alert_0>; >>>> + cooling-device = <&cpu4 1 1>; >>> >>> Out of curiosity: why choosing specific cooling level (so quite fast >>> the device will slow down) instead of letting cooling framework to >>> decide how much to cool? Any particular reason behind this? >> >> This cooling level is just default value in cooling-maps. >> This value is able to overwrite on dts file. >> >> And the thermal subsystem support the cpu cooling features >> with 'cooling-maps'. >> >> Also, when I tested the performance and stress test >> with GLBenchmark, the temperature of big.LITTLE cores/G3D >> reach easily the critical temperature with 8 online cores. >> So, I add the cooling level aggressively to protect >> the system fault of CPU and GPU and to maintain >> the system state. > > I was asking why you do not let cooling framework decide which cooling > level to use but instead you force a specific cooling level. Maybe code > will be a better example. Why not use: > map0 { > /* Set maximum frequency as 1800MHz */ > trip = <&atlas0_alert_0>; > cooling-device = <&cpu4 0 1>; > } > map1 { > /* Set maximum frequency as 1700MHz */ > trip = <&atlas0_alert_1>; > cooling-device = <&cpu4 1 2>; > }; > > For higher frequencies it makes even more sense: > map6 { > /* Set maximum frequency as 800MHz */ > trip = <&atlas0_alert_6>; > cooling-device = <&cpu4 7 11>; > }; > > which allows the system to use suitable cooling level to maintain the > balance between performance and temperature dissipance, instead of some > fixed cooling level which might not be accurate to the system load. Ah. I misunderstand of your question. OK. I'll expand the range of cooling level as you suggested. Best Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On 2016-08-16 08:35, Chanwoo Choi wrote: > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports > PSCI (Power State Coordination Interface) v0.1. > > This patch includes following Device Tree node to support Exynos5433 SoC: > 1. Octa cores for big.LITTLE architecture > - Cortex-A53 LITTLE Quad-core > - Cortex-A57 big Quad-core > - Support PSCI v0.1 > > 2. Clock controller node > - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS > - CMU_CPIF : clocks for LLI (Low Latency Interface) > - CMU_MIF : clocks for DRAM Memory Controller > - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS > - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC > - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA > - CMU_G2D : clocks for G2D/MDMA > - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER > - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO > - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses > - CMU_G3D : clocks for 3D Graphics Engine > - CMU_GSCL : clocks for GSCALER > - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor. > - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor, > CoreSight and L2 cache controller. > - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs. > - CMU_MFC : clocks for MFC (Multi-Format Codec) IP. > - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP. > - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. > - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. > - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs. > > 3. pinctrl node for GPIO > - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad > > 4. Timer > - ARM architecture timer (armv8-timer) > - MCT (Multi Core Timer) timer > > 5. Interrupt controller (GIC-400) > > 6. BUS devices > - HS-I2C (High-Speed I2C) device > - SPI (Serial Peripheral Interface) device > > 7. Sound devices > - I2S bus > - LPASS (Low Power Audio Subsystem) > > 8. Power management devices > - CPUFREQ for for Cortex-A53/A57 > - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP > > 9. Display controller devices > - DECON (Display and enhancement controller) for panel output > - DSI (Display Serial Interface) > - MIC (Mobile Image Compressor) > - IOMMU for GSCL/DECON/TV/MFC/JPEG/FLITE/3AA/FIMC I would prefer to instantiate only SYSMMU controllers for the devices that have been already added, so initially there will by only SYSMMUs for DECON. Other (GSCL, TV, MFC, JPEG, CAMERA ISP) can be added later together with respective master device nodes. > 10. USB > - USB 3.0 DRD (Dual Role Device) controller > - USB 3.0 Host controller > > 11. Storage devices > - MSHC (Mobile Stoarage Host Controller) > > 12. Misc devices > - UART device > - ADC (Analog Digital Converter) > - PWM (Pulse Width Modulation) > - ADMA (Advanced DMA) and PDMA (Peripheral DMA) > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> > Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> > Signed-off-by: Inki Dae <inki.dae@samsung.com> > Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Inha Song <ideal.song@samsung.com> > Signed-off-by: Ingi kim <ingi2.kim@samsung.com> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++ > .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 + > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 + > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 306 ++++ > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1580 ++++++++++++++++++++ > 5 files changed, 2725 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi (snipped) Best regards
Hi Marek, On 2016년 08월 19일 19:48, Marek Szyprowski wrote: > Hello, > > > On 2016-08-16 08:35, Chanwoo Choi wrote: >> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on >> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports >> PSCI (Power State Coordination Interface) v0.1. >> >> This patch includes following Device Tree node to support Exynos5433 SoC: >> 1. Octa cores for big.LITTLE architecture >> - Cortex-A53 LITTLE Quad-core >> - Cortex-A57 big Quad-core >> - Support PSCI v0.1 >> >> 2. Clock controller node >> - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS >> - CMU_CPIF : clocks for LLI (Low Latency Interface) >> - CMU_MIF : clocks for DRAM Memory Controller >> - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS >> - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC >> - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA >> - CMU_G2D : clocks for G2D/MDMA >> - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER >> - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO >> - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses >> - CMU_G3D : clocks for 3D Graphics Engine >> - CMU_GSCL : clocks for GSCALER >> - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor. >> - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor, >> CoreSight and L2 cache controller. >> - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs. >> - CMU_MFC : clocks for MFC (Multi-Format Codec) IP. >> - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP. >> - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. >> - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. >> - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs. >> >> 3. pinctrl node for GPIO >> - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad >> >> 4. Timer >> - ARM architecture timer (armv8-timer) >> - MCT (Multi Core Timer) timer >> >> 5. Interrupt controller (GIC-400) >> >> 6. BUS devices >> - HS-I2C (High-Speed I2C) device >> - SPI (Serial Peripheral Interface) device >> >> 7. Sound devices >> - I2S bus >> - LPASS (Low Power Audio Subsystem) >> >> 8. Power management devices >> - CPUFREQ for for Cortex-A53/A57 >> - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP >> >> 9. Display controller devices >> - DECON (Display and enhancement controller) for panel output >> - DSI (Display Serial Interface) >> - MIC (Mobile Image Compressor) >> - IOMMU for GSCL/DECON/TV/MFC/JPEG/FLITE/3AA/FIMC > > I would prefer to instantiate only SYSMMU controllers for the devices that > have been already added, so initially there will by only SYSMMUs for DECON. > Other (GSCL, TV, MFC, JPEG, CAMERA ISP) can be added later together with > respective master device nodes. OK. I'll remove all SYSMMU dt nodes from exynos5433.dtsi on next version. [snip]
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi new file mode 100644 index 000000000000..2bf94face3f7 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -0,0 +1,794 @@ +/* + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Chanwoo Choi <cw00.choi@samsung.com> + * + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +#define PIN_DRV_LV1 0 +#define PIN_DRV_LV2 2 +#define PIN_DRV_LV3 1 +#define PIN_DRV_LV4 3 + +#define PIN_IN 0 +#define PIN_OUT 1 +#define PIN_FUNC1 2 + +#define PIN(_func, _pin, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <PIN_ ##_func>; \ + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_aud { + gpz0: gpz0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpz1: gpz1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", + "gpz0-4", "gpz0-5", "gpz0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + uart_aud_bus: uart-aud-bus { + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_cpif { + gpv6: gpv6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_ese { + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_finger { + gpd5: gpd5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c6_bus: hs-i2c6-bus { + samsung,pins = "gpd5-3", "gpd5-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + +}; + +&pinctrl_fsys { + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr4: gpr4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr0: gpr0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr1: gpr1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr2: gpr2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr3: gpr3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + sd0_clk: sd0-clk { + samsung,pins = "gpr0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpr0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpr0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_qrdy: sd0-qrdy { + samsung,pins = "gpr0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpr1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpr2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpr2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpr3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + pcie_bus: pcie_bus { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpr4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpr4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpr4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpr4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk_output: sd2-clk-output { + samsung,pins = "gpr4-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd2_cmd_output: sd2-cmd-output { + samsung,pins = "gpr4-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; +}; + +&pinctrl_imem { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_nfc { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c4_bus: hs-i2c4-bus { + samsung,pins = "gpj0-1", "gpj0-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + +}; + +&pinctrl_peric { + gpv7: gpv7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd4: gpd4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd8: gpd8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd6: gpd6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd7: gpd7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c8_bus: hs-i2c8-bus { + samsung,pins = "gpb0-1", "gpb0-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c9_bus: hs-i2c9-bus { + samsung,pins = "gpb0-3", "gpb0-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", + "gpd4-3", "gpd4-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", + "gpd4-3", "gpd4-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpd4-3", "gpd4-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + fimc_is_spi_pin0: fimc-is-spi-pin0 { + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_spi_pin1: fimc-is-spi-pin1 { + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_bus: uart0-bus { + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + hs_i2c2_bus: hs-i2c2-bus { + samsung,pins = "gpd0-3", "gpd0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_bus: uart2-bus { + samsung,pins = "gpd1-5", "gpd1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + uart1_bus: uart1-bus { + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + hs_i2c3_bus: hs-i2c3-bus { + samsung,pins = "gpd1-3", "gpd1-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + + hs_i2c0_bus: hs-i2c0-bus { + samsung,pins = "gpd2-1", "gpd2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c1_bus: hs-i2c1-bus { + samsung,pins = "gpd2-3", "gpd2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd2-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c7_bus: hs-i2c7-bus { + samsung,pins = "gpd2-7", "gpd2-6"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c10_bus: hs-i2c10-bus { + samsung,pins = "gpg3-1", "gpg3-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c11_bus: hs-i2c11-bus { + samsung,pins = "gpg3-3", "gpg3-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi3_bus: spi3-bus { + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi4_bus: spi4-bus { + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpc1-1", "gpc0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch0_i2c: fimc-is-ch0_i2c { + samsung,pins = "gpc2-1", "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch0_mclk: fimc-is-ch0_mclk { + samsung,pins = "gpd7-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch1_i2c: fimc-is-ch1-i2c { + samsung,pins = "gpc2-3", "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch1_mclk: fimc-is-ch1-mclk { + samsung,pins = "gpd7-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch2_i2c: fimc-is-ch2-i2c { + samsung,pins = "gpc2-5", "gpc2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch2_mclk: fimc-is-ch2-mclk { + samsung,pins = "gpd7-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_touch { + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c5_bus: hs-i2c5-bus { + samsung,pins = "gpj1-1", "gpj1-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi new file mode 100644 index 000000000000..9be2978f1b9a --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi @@ -0,0 +1,23 @@ +/* + * Device tree sources for Exynos5433 TMU sensor configuration + * + * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <23>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <75>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <150>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_mux_addr = <6>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..125fe58d77ce --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi @@ -0,0 +1,22 @@ +/* + * Device tree sources for Exynos5433 TMU sensor configuration + * + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <75>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <150>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi new file mode 100644 index 000000000000..175121db367e --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi @@ -0,0 +1,306 @@ +/* + * Device tree sources for Exynos5433 thermal zone + * + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { +thermal-zones { + atlas0_thermal: atlas0-thermal { + thermal-sensors = <&tmu_atlas0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + atlas0_alert_0: atlas0-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_1: atlas0-alert-1 { + temperature = <55000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_2: atlas0-alert-2 { + temperature = <60000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_3: atlas0-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_4: atlas0-alert-4 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_5: atlas0-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_6: atlas0-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map0 { + /* Set maximum frequency as 1800MHz */ + trip = <&atlas0_alert_0>; + cooling-device = <&cpu4 1 1>; + }; + map1 { + /* Set maximum frequency as 1700MHz */ + trip = <&atlas0_alert_1>; + cooling-device = <&cpu4 2 2>; + }; + map2 { + /* Set maximum frequency as 1600MHz */ + trip = <&atlas0_alert_2>; + cooling-device = <&cpu4 3 3>; + }; + map3 { + /* Set maximum frequency as 1500MHz */ + trip = <&atlas0_alert_3>; + cooling-device = <&cpu4 4 4>; + }; + map4 { + /* Set maximum frequency as 1400MHz */ + trip = <&atlas0_alert_4>; + cooling-device = <&cpu4 5 5>; + }; + map5 { + /* Set maximum frequencyas 1200MHz */ + trip = <&atlas0_alert_5>; + cooling-device = <&cpu4 7 7>; + }; + map6 { + /* Set maximum frequency as 800MHz */ + trip = <&atlas0_alert_6>; + cooling-device = <&cpu4 11 11>; + }; + }; + }; + + atlas1_thermal: atlas1-thermal { + thermal-sensors = <&tmu_atlas1>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + atlas1_alert_0: atlas1-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_1: atlas1-alert-1 { + temperature = <55000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_2: atlas1-alert-2 { + temperature = <60000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_3: atlas1-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_4: atlas1-alert-4 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_5: atlas1-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_6: atlas1-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; + + g3d_thermal: g3d-thermal { + thermal-sensors = <&tmu_g3d>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + g3d_alert_0: g3d-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_1: g3d-alert-1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_2: g3d-alert-2 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_3: g3d-alert-3 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_4: g3d-alert-4 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_5: g3d-alert-5 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_6: g3d-alert-6 { + temperature = <100000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; + + apollo_thermal: apollo-thermal { + thermal-sensors = <&tmu_apollo>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + apollo_alert_0: apollo-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_1: apollo-alert-1 { + temperature = <55000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_2: apollo-alert-2 { + temperature = <60000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_3: apollo-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_4: apollo-alert-4 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_5: apollo-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_6: apollo-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map0 { + /* Set maximum frequency as 1200MHz */ + trip = <&apollo_alert_0>; + cooling-device = <&cpu0 1 1>; + }; + map1 { + /* Set maximum frequency as 1100MHz */ + trip = <&apollo_alert_1>; + cooling-device = <&cpu0 2 2>; + }; + map2 { + /* Set maximum frequency as 1000MHz */ + trip = <&apollo_alert_2>; + cooling-device = <&cpu0 3 3>; + }; + map3 { + /* Set maximum frequency as 900MHz */ + trip = <&apollo_alert_3>; + cooling-device = <&cpu0 4 4>; + }; + map4 { + /* Set maximum frequency as 800MHz */ + trip = <&apollo_alert_4>; + cooling-device = <&cpu0 5 5>; + }; + map5 { + /* Set maximum frequency as 700MHz */ + trip = <&apollo_alert_5>; + cooling-device = <&cpu0 6 6>; + }; + map6 { + /* Set maximum frequency as 500MHz */ + trip = <&apollo_alert_6>; + cooling-device = <&cpu0 8 8>; + }; + }; + }; + + isp_thermal: isp-thermal { + thermal-sensors = <&tmu_isp>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + isp_alert_0: isp-alert-0 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_1: isp-alert-1 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_2: isp-alert-2 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_3: isp-alert-3 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_4: isp-alert-4 { + temperature = <100000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_5: isp-alert-5 { + temperature = <105000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_6: isp-alert-6 { + temperature = <110000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; +}; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi new file mode 100644 index 000000000000..2a5b05744533 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -0,0 +1,1580 @@ +/* + * Samsung's Exynos5433 SoC device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Samsung's Exynos5433 SoC device nodes are listed in this file. + * Exynos5433 based board files can include this file and provide + * values for board specific bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, + * additional nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/exynos5433.h> + +/ { + compatible = "samsung,exynos5433"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x100>; + clock-frequency = <1300000000>; + clocks = <&cmu_apollo CLK_SCLK_APOLLO>; + clock-names = "apolloclk"; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x101>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x102>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x103>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x0>; + clock-frequency = <1900000000>; + clocks = <&cmu_atlas CLK_SCLK_ATLAS>; + clock-names = "atlasclk"; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x1>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x2>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x3>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + }; + + cluster_a53_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <925000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1050000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1075000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1112500>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1112500>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1150000>; + }; + }; + + cluster_a57_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <900000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <912500>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <912500>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <937500>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + }; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1087500>; + }; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1125000>; + }; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1137500>; + }; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1175000>; + }; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1212500>; + }; + opp@1900000000 { + opp-hz = /bits/ 64 <1900000000>; + opp-microvolt = <1262500>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_off = <0x84000002>; + cpu_on = <0xC4000003>; + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x400>; + mask = <0x1>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x18000000>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + xxti: xxti { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + + cmu_top: clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; + + cmu_cpif: clock-controller@10fc0000 { + compatible = "samsung,exynos5433-cmu-cpif"; + reg = <0x10fc0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk"; + clocks = <&xxti>; + }; + + cmu_mif: clock-controller@105b0000 { + compatible = "samsung,exynos5433-cmu-mif"; + reg = <0x105b0000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>; + }; + + cmu_peric: clock-controller@14c80000 { + compatible = "samsung,exynos5433-cmu-peric"; + reg = <0x14c80000 0x1000>; + #clock-cells = <1>; + }; + + cmu_peris: clock-controller@0x10040000 { + compatible = "samsung,exynos5433-cmu-peris"; + reg = <0x10040000 0x1000>; + #clock-cells = <1>; + }; + + cmu_fsys: clock-controller@156e0000 { + compatible = "samsung,exynos5433-cmu-fsys"; + reg = <0x156e0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_ufs_mphy", + "div_aclk_fsys_200", + "sclk_pcie_100_fsys", + "sclk_ufsunipro_fsys", + "sclk_mmc2_fsys", + "sclk_mmc1_fsys", + "sclk_mmc0_fsys", + "sclk_usbhost30_fsys", + "sclk_usbdrd30_fsys"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_UFS_MPHY>, + <&cmu_top CLK_DIV_ACLK_FSYS_200>, + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, + <&cmu_top CLK_SCLK_MMC2_FSYS>, + <&cmu_top CLK_SCLK_MMC1_FSYS>, + <&cmu_top CLK_SCLK_MMC0_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; + }; + + cmu_g2d: clock-controller@12460000 { + compatible = "samsung,exynos5433-cmu-g2d"; + reg = <0x12460000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_g2d_266", + "aclk_g2d_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_G2D_266>, + <&cmu_top CLK_ACLK_G2D_400>; + }; + + cmu_disp: clock-controller@13b90000 { + compatible = "samsung,exynos5433-cmu-disp"; + reg = <0x13b90000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_dsim1_disp", + "sclk_dsim0_disp", + "sclk_dsd_disp", + "sclk_decon_tv_eclk_disp", + "sclk_decon_vclk_disp", + "sclk_decon_eclk_disp", + "sclk_decon_tv_vclk_disp", + "aclk_disp_333"; + clocks = <&xxti>, + <&cmu_mif CLK_SCLK_DSIM1_DISP>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_mif CLK_SCLK_DSD_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, + <&cmu_mif CLK_ACLK_DISP_333>; + }; + + cmu_aud: clock-controller@114c0000 { + compatible = "samsung,exynos5433-cmu-aud"; + reg = <0x114c0000 0x1000>; + #clock-cells = <1>; + }; + + cmu_bus0: clock-controller@13600000 { + compatible = "samsung,exynos5433-cmu-bus0"; + reg = <0x13600000 0x1000>; + #clock-cells = <1>; + + clock-names = "aclk_bus0_400"; + clocks = <&cmu_top CLK_ACLK_BUS0_400>; + }; + + cmu_bus1: clock-controller@14800000 { + compatible = "samsung,exynos5433-cmu-bus1"; + reg = <0x14800000 0x1000>; + #clock-cells = <1>; + + clock-names = "aclk_bus1_400"; + clocks = <&cmu_top CLK_ACLK_BUS1_400>; + }; + + cmu_bus2: clock-controller@13400000 { + compatible = "samsung,exynos5433-cmu-bus2"; + reg = <0x13400000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_bus2_400"; + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; + }; + + cmu_g3d: clock-controller@14aa0000 { + compatible = "samsung,exynos5433-cmu-g3d"; + reg = <0x14aa0000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_g3d_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + }; + + cmu_gscl: clock-controller@13cf0000 { + compatible = "samsung,exynos5433-cmu-gscl"; + reg = <0x13cf0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_gscl_111", + "aclk_gscl_333"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; + }; + + cmu_apollo: clock-controller@11900000 { + compatible = "samsung,exynos5433-cmu-apollo"; + reg = <0x11900000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_apollo"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; + }; + + cmu_atlas: clock-controller@11800000 { + compatible = "samsung,exynos5433-cmu-atlas"; + reg = <0x11800000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_atlas"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; + }; + + cmu_mscl: clock-controller@105d0000 { + compatible = "samsung,exynos5433-cmu-mscl"; + reg = <0x150d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_jpeg_mscl", + "aclk_mscl_400"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_top CLK_ACLK_MSCL_400>; + }; + + cmu_mfc: clock-controller@15280000 { + compatible = "samsung,exynos5433-cmu-mfc"; + reg = <0x15280000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_mfc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + }; + + cmu_hevc: clock-controller@14f80000 { + compatible = "samsung,exynos5433-cmu-hevc"; + reg = <0x14f80000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_hevc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + }; + + cmu_isp: clock-controller@146d0000 { + compatible = "samsung,exynos5433-cmu-isp"; + reg = <0x146d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_isp_dis_400", + "aclk_isp_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_ISP_DIS_400>, + <&cmu_top CLK_ACLK_ISP_400>; + }; + + cmu_cam0: clock-controller@120d0000 { + compatible = "samsung,exynos5433-cmu-cam0"; + reg = <0x120d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_cam0_333", + "aclk_cam0_400", + "aclk_cam0_552"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_CAM0_333>, + <&cmu_top CLK_ACLK_CAM0_400>, + <&cmu_top CLK_ACLK_CAM0_552>; + }; + + cmu_cam1: clock-controller@145d0000 { + compatible = "samsung,exynos5433-cmu-cam1"; + reg = <0x145d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_isp_uart_cam1", + "sclk_isp_spi1_cam1", + "sclk_isp_spi0_cam1", + "aclk_cam1_333", + "aclk_cam1_400", + "aclk_cam1_552"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, + <&cmu_top CLK_ACLK_CAM1_333>, + <&cmu_top CLK_ACLK_CAM1_400>, + <&cmu_top CLK_ACLK_CAM1_552>; + }; + + tmu_atlas0: tmu@10060000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10060000 0x200>; + interrupts = <0 95 0>; + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, + <&cmu_peris CLK_SCLK_TMU0>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_atlas1: tmu@10068000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10068000 0x200>; + interrupts = <0 96 0>; + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, + <&cmu_peris CLK_SCLK_TMU0>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_g3d: tmu@10070000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10070000 0x200>; + interrupts = <0 99 0>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-g3d-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_apollo: tmu@10078000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10078000 0x200>; + interrupts = <0 115 0>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_isp: tmu@1007c000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x1007c000 0x200>; + interrupts = <0 94 0>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + mct@101c0000 { + compatible = "samsung,exynos5433-mct", + "samsung,exynos4210-mct"; + reg = <0x101c0000 0x800>; + interrupts = <0 102 0>, <0 103 0>, <0 104 0>, <0 105 0>, + <0 106 0>, <0 107 0>, <0 108 0>, <0 109 0>, + <0 110 0>, <0 111 0>, <0 112 0>, <0 113 0>; + clocks = <&xxti>, + <&cmu_peris CLK_PCLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_alive: pinctrl@10580000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10580000 0x1A20>, <0x11090000 0x100>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupts = <0 16 0>; + }; + }; + + pinctrl_aud: pinctrl@114b0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x114b0000 0x1000>; + interrupts = <0 68 0>; + }; + + pinctrl_cpif: pinctrl@10fe0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10fe0000 0x1000>; + interrupts = <0 179 0>; + }; + + pinctrl_ese: pinctrl@14ca0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14ca0000 0x1000>; + interrupts = <0 413 0>; + }; + + pinctrl_finger: pinctrl@14cb0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cb0000 0x1000>; + interrupts = <0 414 0>; + }; + + pinctrl_fsys: pinctrl@15690000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x15690000 0x1000>; + interrupts = <0 229 0>; + }; + + pinctrl_imem: pinctrl@11090000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x11090000 0x1000>; + interrupts = <0 325 0>; + }; + + pinctrl_nfc: pinctrl@14cd0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cd0000 0x1000>; + interrupts = <0 441 0>; + }; + + pinctrl_peric: pinctrl@14cc0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cc0000 0x1100>; + interrupts = <0 440 0>; + }; + + pinctrl_touch: pinctrl@14ce0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14ce0000 0x1100>; + interrupts = <0 442 0>; + }; + + rtc: rtc@10590000 { + compatible = "samsung,exynos3250-rtc"; + reg = <0x10590000 0x100>; + interrupts = <0 385 0>, <0 386 0>; + status = "disabled"; + }; + + pmu_system_controller: system-controller@105c0000 { + compatible = "samsung,exynos5433-pmu", "syscon"; + reg = <0x105c0000 0x5008>; + #clock-cells = <1>; + clock-names = "clkout16"; + clocks = <&xxti>; + }; + + gic: interrupt-controller@11001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x11001000 0x1000>, + <0x11002000 0x2000>, + <0x11004000 0x2000>, + <0x11006000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + lpass: lpass@11400000 { + compatible = "samsung,exynos5433-lpass"; + reg = <0x11400000 0x100>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + i2s0: i2s0@11440000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x11440000 0x100>; + dmas = <&adma 0 &adma 2>; + dma-names = "tx", "rx"; + interrupts = <0 70 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_I2S_BCLK>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + + mipi_phy: video-phy@105C0708 { + compatible = "samsung,exynos5433-mipi-video-phy"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,cam1-sysreg = <&syscon_cam1>; + samsung,disp-sysreg = <&syscon_disp>; + }; + + decon: decon@13800000 { + compatible = "samsung,exynos5433-decon"; + reg = <0x13800000 0x2104>; + clocks = <&cmu_disp CLK_PCLK_DECON>, + <&cmu_disp CLK_ACLK_DECON>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_XIU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_SCLK_DECON_VCLK>, + <&cmu_disp CLK_SCLK_DECON_ECLK>; + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", + "aclk_xiu_decon0x", "pclk_smmu_decon0x", + "sclk_decon_vclk", "sclk_decon_eclk"; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0 201 0>, <0 202 0>, <0 203 0>; + samsung,disp-sysreg = <&syscon_disp>; + status = "disabled"; + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; + iommu-names = "m0", "m1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = <&mic_to_decon>; + }; + }; + }; + }; + + dsi: dsi@13900000 { + compatible = "samsung,exynos5433-mipi-dsi"; + reg = <0x13900000 0xC0>; + interrupts = <0 205 0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu_disp CLK_PCLK_DSIM0>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, + <&cmu_disp CLK_SCLK_DSIM0>; + clock-names = "bus_clk", + "phyclk_mipidphy0_bitclkdiv8", + "phyclk_mipidphy0_rxclkesc0", + "sclk_rgb_vclk_to_dsim0", + "sclk_mipi"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_to_mic: endpoint { + remote-endpoint = <&mic_to_dsi>; + }; + }; + }; + }; + + mic: mic@13930000 { + compatible = "samsung,exynos5433-mic"; + reg = <0x13930000 0x48>; + clocks = <&cmu_disp CLK_PCLK_MIC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; + samsung,disp-syscon = <&syscon_disp>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mic_to_decon: endpoint { + remote-endpoint = <&decon_to_mic>; + }; + }; + + port@1 { + reg = <1>; + mic_to_dsi: endpoint { + remote-endpoint = <&dsi_to_mic>; + }; + }; + }; + }; + + syscon_disp: syscon@13B80000 { + compatible = "samsung,exynos5433-sysreg", "syscon"; + reg = <0x13B80000 0x1010>; + }; + + syscon_cam0: syscon@120F0000 { + compatible = "samsung,exynos5433-sysreg", "syscon"; + reg = <0x120F0000 0x1020>; + }; + + syscon_cam1: syscon@145F0000 { + compatible = "samsung,exynos5433-sysreg", "syscon"; + reg = <0x145F0000 0x1038>; + }; + + sysmmu_gscl0: sysmmu@0x13C80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C80000 0x1000>; + interrupts = <0 288 0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>, + <&cmu_gscl CLK_PCLK_SMMU_GSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_gscl1: sysmmu@0x13C90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C90000 0x1000>; + interrupts = <0 290 0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>, + <&cmu_gscl CLK_PCLK_SMMU_GSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_gscl2: sysmmu@0x13CA0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13CA0000 0x1000>; + interrupts = <0 292 0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>, + <&cmu_gscl CLK_PCLK_SMMU_GSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_decon0x: sysmmu@0x13A00000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13A00000 0x1000>; + interrupts = <0 192 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + #iommu-cells = <0>; + }; + + sysmmu_decon1x: sysmmu@0x13A10000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13A10000 0x1000>; + interrupts = <0 194 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>; + #iommu-cells = <0>; + }; + + sysmmu_tv0x: sysmmu@0x13A20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13A20000 0x1000>; + interrupts = <0 214 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, + <&cmu_disp CLK_ACLK_SMMU_TV0X>; + #iommu-cells = <0>; + }; + + sysmmu_tv1x: sysmmu@0x13A30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13A30000 0x1000>; + interrupts = <0 216 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, + <&cmu_disp CLK_ACLK_SMMU_TV1X>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_0: sysmmu@0x15200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15200000 0x1000>; + interrupts = <0 352 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, + <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_1: sysmmu@0x15210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15210000 0x1000>; + interrupts = <0 354 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, + <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg: sysmmu@0x15060000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15060000 0x1000>; + interrupts = <0 408 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, + <&cmu_mscl CLK_ACLK_SMMU_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_flite_a: sysmmu@0x12150000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12150000 0x1000>; + interrupts = <0 128 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_A>, + <&cmu_cam0 CLK_ACLK_SMMU_LITE_A>; + #iommu-cells = <0>; + }; + + sysmmu_flite_b: sysmmu@0x12160000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12160000 0x1000>; + interrupts = <0 130 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_B>, + <&cmu_cam0 CLK_ACLK_SMMU_LITE_B>; + #iommu-cells = <0>; + }; + + sysmmu_flite_d: sysmmu@0x12170000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12170000 0x1000>; + interrupts = <0 132 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_cam0 CLK_PCLK_SMMU_LITE_D>, + <&cmu_cam0 CLK_ACLK_SMMU_LITE_D>; + #iommu-cells = <0>; + }; + + sysmmu_3aa0: sysmmu@0x12180000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12180000 0x1000>; + interrupts = <0 137 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_cam0 CLK_PCLK_SMMU_3AA0>, + <&cmu_cam0 CLK_ACLK_SMMU_3AA0>; + #iommu-cells = <0>; + }; + + sysmmu_3aa1: sysmmu@0x121A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x121A0000 0x1000>; + interrupts = <0 147 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_cam0 CLK_PCLK_SMMU_3AA1>, + <&cmu_cam0 CLK_ACLK_SMMU_3AA1>; + #iommu-cells = <0>; + }; + + sysmmu_flite_c: sysmmu@0x142B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x142B0000 0x1000>; + interrupts = <0 160 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_cam1 CLK_PCLK_SMMU_LITE_C>, + <&cmu_cam1 CLK_ACLK_SMMU_LITE_C>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_fd: sysmmu@0x142C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x142C0000 0x1000>; + interrupts = <0 162 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_cam1 CLK_PCLK_SMMU_FD>, + <&cmu_cam1 CLK_ACLK_SMMU_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_cpu: sysmmu@0x142D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x142D0000 0x1000>; + interrupts = <0 169 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_ISPCPU>, + <&cmu_isp CLK_ACLK_SMMU_ISPCPU>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_isp: sysmmu@0x14320000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14320000 0x1000>; + interrupts = <0 346 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_ISP>, + <&cmu_isp CLK_ACLK_SMMU_ISP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_drc: sysmmu@0x14330000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14330000 0x1000>; + interrupts = <0 338 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_DRC>, + <&cmu_isp CLK_ACLK_SMMU_DRC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_scc: sysmmu@0x14340000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14340000 0x1000>; + interrupts = <0 340 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_SCALERC>, + <&cmu_isp CLK_ACLK_SMMU_SCALERC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_dis0: sysmmu@0x143A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x143A0000 0x1000>; + interrupts = <0 342 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_DIS0>, + <&cmu_isp CLK_ACLK_SMMU_DIS0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_dis1: sysmmu@0x143B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x143B0000 0x1000>; + interrupts = <0 344 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_DIS1>, + <&cmu_isp CLK_ACLK_SMMU_DIS1>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_scp: sysmmu@0x143C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x143C0000 0x1000>; + interrupts = <0 336 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_SCALERP>, + <&cmu_isp CLK_ACLK_SMMU_SCALERP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_3dnr: sysmmu@0x143D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x143D0000 0x1000>; + interrupts = <0 349 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_isp CLK_PCLK_SMMU_3DNR>, + <&cmu_isp CLK_ACLK_SMMU_3DNR>; + #iommu-cells = <0>; + }; + + serial_0: serial@14c10000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c10000 0x100>; + interrupts = <0 421 0>; + clocks = <&cmu_peric CLK_PCLK_UART0>, + <&cmu_peric CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "disabled"; + }; + + serial_1: serial@14c20000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c20000 0x100>; + interrupts = <0 422 0>; + clocks = <&cmu_peric CLK_PCLK_UART1>, + <&cmu_peric CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_bus>; + status = "disabled"; + }; + + serial_2: serial@14c30000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c30000 0x100>; + interrupts = <0 423 0>; + clocks = <&cmu_peric CLK_PCLK_UART2>, + <&cmu_peric CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_bus>; + }; + + serial_3: serial@11460000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x11460000 0x100>; + interrupts = <0 67 0>; + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, + <&cmu_aud CLK_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_aud_bus>; + status = "disabled"; + }; + + spi_0: spi@14d20000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d20000 0x100>; + interrupts = <0 432 0>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI0>, + <&cmu_peric CLK_SCLK_SPI0>, + <&cmu_peric CLK_SCLK_IOCLK_SPI0>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_1: spi@14d30000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d30000 0x100>; + interrupts = <0 433 0>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI1>, + <&cmu_peric CLK_SCLK_SPI1>, + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_2: spi@14d40000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d40000 0x100>; + interrupts = <0 434 0>; + dmas = <&pdma0 13>, <&pdma0 12>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI2>, + <&cmu_peric CLK_SCLK_SPI2>, + <&cmu_peric CLK_SCLK_IOCLK_SPI2>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_3: spi@14d50000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d50000 0x100>; + interrupts = <0 447 0>; + dmas = <&pdma0 23>, <&pdma0 22>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI3>, + <&cmu_peric CLK_SCLK_SPI3>, + <&cmu_peric CLK_SCLK_IOCLK_SPI3>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_4: spi@14d00000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d00000 0x100>; + interrupts = <0 412 0>; + dmas = <&pdma0 25>, <&pdma0 24>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI4>, + <&cmu_peric CLK_SCLK_SPI4>, + <&cmu_peric CLK_SCLK_IOCLK_SPI4>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_bus>; + num-cs = <1>; + status = "disabled"; + }; + + adc: adc@14d10000 { + compatible = "samsung,exynos7-adc"; + reg = <0x14d10000 0x100>; + interrupts = <0 438 0>; + clock-names = "adc"; + clocks = <&cmu_peric CLK_PCLK_ADCIF>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + pwm: pwm@14dd0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x14dd0000 0x100>; + interrupts = <0 416 0>, <0 417 0>, + <0 418 0>, <0 419 0>, <0 420 0>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + clocks = <&cmu_peric CLK_PCLK_PWM>; + clock-names = "timers"; + #pwm-cells = <3>; + status = "disabled"; + }; + + hsi2c_0: hsi2c@14e40000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e40000 0x1000>; + interrupts = <0 428 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@14e50000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e50000 0x1000>; + interrupts = <0 429 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@14e60000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e60000 0x1000>; + interrupts = <0 430 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@14e70000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e70000 0x1000>; + interrupts = <0 431 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: hsi2c@14ec0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ec0000 0x1000>; + interrupts = <0 424 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: hsi2c@14ed0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ed0000 0x1000>; + interrupts = <0 425 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: hsi2c@14ee0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ee0000 0x1000>; + interrupts = <0 426 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: hsi2c@14ef0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ef0000 0x1000>; + interrupts = <0 427 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: hsi2c@14d90000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14d90000 0x1000>; + interrupts = <0 443 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c8_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C8>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: hsi2c@14da0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14da0000 0x1000>; + interrupts = <0 444 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c9_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C9>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: hsi2c@14de0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14de0000 0x1000>; + interrupts = <0 445 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c10_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C10>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_11: hsi2c@14df0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14df0000 0x1000>; + interrupts = <0 446 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c11_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C11>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + usbdrd30: usb@15400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "usbdrd30", "usbdrd30_susp_clk"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, + <&cmu_top CLK_MOUT_SCLK_USBDRD30>, + <&cmu_top CLK_DIV_SCLK_USBDRD30>; + assigned-clock-parents = + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; + assigned-clock-rates = <0>, <0>, <66700000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x15400000 0x10000>; + interrupts = <0 231 0>; + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + + }; + + usbdrd30_phy: phy@15500000 { + compatible = "samsung,exynos5433-usbdrd-phy"; + reg = <0x15500000 0x100>; + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>; + assigned-clock-parents = + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbhost30_phy: phy@15580000 { + compatible = "samsung,exynos5433-usbdrd-phy"; + reg = <0x15580000 0x100>; + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", + "itp"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>; + assigned-clock-parents = + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbhost30: usb@15a00000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "usbdrd30", "usbdrd30_susp_clk"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, + <&cmu_top CLK_DIV_SCLK_USBHOST30>; + assigned-clock-parents = + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; + assigned-clock-rates = <0>, <0>, <66700000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + usbdrd_dwc3_0: dwc3 { + compatible = "snps,dwc3"; + reg = <0x15a00000 0x10000>; + interrupts = <0 244 0>; + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mshc_0: mshc@15540000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 225 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15540000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC0>, + <&cmu_fsys CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mshc_1: mshc@15550000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 226 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15550000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC1>, + <&cmu_fsys CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mshc_2: mshc@15560000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 227 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15560000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC2>, + <&cmu_fsys CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma0: pdma@15610000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15610000 0x1000>; + interrupts = <0 228 0>; + clocks = <&cmu_fsys CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@15600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15600000 0x1000>; + interrupts = <0 246 0>; + clocks = <&cmu_fsys CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + adma: adma@11420000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11420000 0x1000>; + interrupts = <0 73 0>; + clocks = <&cmu_aud CLK_ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff04>, + <1 14 0xff04>, + <1 11 0xff04>, + <1 10 0xff04>; + }; +}; + +#include "exynos5433-pinctrl.dtsi" +#include "exynos5433-tmu.dtsi"
This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports PSCI (Power State Coordination Interface) v0.1. This patch includes following Device Tree node to support Exynos5433 SoC: 1. Octa cores for big.LITTLE architecture - Cortex-A53 LITTLE Quad-core - Cortex-A57 big Quad-core - Support PSCI v0.1 2. Clock controller node - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS - CMU_CPIF : clocks for LLI (Low Latency Interface) - CMU_MIF : clocks for DRAM Memory Controller - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA - CMU_G2D : clocks for G2D/MDMA - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses - CMU_G3D : clocks for 3D Graphics Engine - CMU_GSCL : clocks for GSCALER - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor. - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor, CoreSight and L2 cache controller. - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs. - CMU_MFC : clocks for MFC (Multi-Format Codec) IP. - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP. - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs. 3. pinctrl node for GPIO - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad 4. Timer - ARM architecture timer (armv8-timer) - MCT (Multi Core Timer) timer 5. Interrupt controller (GIC-400) 6. BUS devices - HS-I2C (High-Speed I2C) device - SPI (Serial Peripheral Interface) device 7. Sound devices - I2S bus - LPASS (Low Power Audio Subsystem) 8. Power management devices - CPUFREQ for for Cortex-A53/A57 - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP 9. Display controller devices - DECON (Display and enhancement controller) for panel output - DSI (Display Serial Interface) - MIC (Mobile Image Compressor) - IOMMU for GSCL/DECON/TV/MFC/JPEG/FLITE/3AA/FIMC 10. USB - USB 3.0 DRD (Dual Role Device) controller - USB 3.0 Host controller 11. Storage devices - MSHC (Mobile Stoarage Host Controller) 12. Misc devices - UART device - ADC (Analog Digital Converter) - PWM (Pulse Width Modulation) - ADMA (Advanced DMA) and PDMA (Peripheral DMA) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Ingi kim <ingi2.kim@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++ .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 + .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 + arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 306 ++++ arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1580 ++++++++++++++++++++ 5 files changed, 2725 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi