| Message ID | 1471529868-13669-1-git-send-email-javier@osg.samsung.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
On 18-08-16 16:17, Javier Martinez Canillas wrote: > If request_irq() fails in mwifiex_sdio_probe_of(), only an error message > is printed but the actual error is not propagated to the caller function. Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care. The device may still function without this wake interrupt. Regards, Arend > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > > drivers/net/wireless/marvell/mwifiex/sdio.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c > index d3e1561ca075..00727936ad6e 100644 > --- a/drivers/net/wireless/marvell/mwifiex/sdio.c > +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c > @@ -125,6 +125,7 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card) > dev_err(dev, > "Failed to request irq_wifi %d (%d)\n", > cfg->irq_wifi, ret); > + return ret; > } > disable_irq(cfg->irq_wifi); > } >
Hello Arend, Thanks a lot for your feedback. On 08/18/2016 03:14 PM, Arend van Spriel wrote: > On 18-08-16 16:17, Javier Martinez Canillas wrote: >> If request_irq() fails in mwifiex_sdio_probe_of(), only an error message >> is printed but the actual error is not propagated to the caller function. > > Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care. > Hmm, I'm not so sure about that. It's checking the wifiex_sdio_probe_of() return value. If the IRQ request failing is not an error, then at the very least the call to disable_irq() should be avoided if request_irq() fails, and the message should be changed from dev_err() to dev_dgb() or dev_info(). > The device may still function without this wake interrupt. > That's correct, the binding says that the "interrupts" property in the child node is optional since is just a wakeup IRQ. Now the question is if should be an error if the IRQ is defined but fails to be requested. > Regards, > Arend > Best regards,
On 18-08-16 21:29, Javier Martinez Canillas wrote: > Hello Arend, > > Thanks a lot for your feedback. > > On 08/18/2016 03:14 PM, Arend van Spriel wrote: >> On 18-08-16 16:17, Javier Martinez Canillas wrote: >>> If request_irq() fails in mwifiex_sdio_probe_of(), only an error message >>> is printed but the actual error is not propagated to the caller function. >> >> Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care. >> > > Hmm, I'm not so sure about that. It's checking the wifiex_sdio_probe_of() > return value. Ok. I looked at 4.7 sources on lxr [1]. > If the IRQ request failing is not an error, then at the very least the call > to disable_irq() should be avoided if request_irq() fails, and the message > should be changed from dev_err() to dev_dgb() or dev_info(). agree. >> The device may still function without this wake interrupt. >> > > That's correct, the binding says that the "interrupts" property in the child > node is optional since is just a wakeup IRQ. Now the question is if should > be an error if the IRQ is defined but fails to be requested. Clearly it indicates an error in the DT specification so behavior is not as expected. Personally I would indeed consider it an error, but I was just indicating that it might have done like this intentionally. Regards, Arend [1] http://lxr.free-electrons.com/source/drivers/net/wireless/marvell/mwifiex/sdio.c#L192 >> Regards, >> Arend >> > > Best regards, >
Hello Arend, On 08/18/2016 03:49 PM, Arend van Spriel wrote: > > > On 18-08-16 21:29, Javier Martinez Canillas wrote: >> Hello Arend, >> >> Thanks a lot for your feedback. >> >> On 08/18/2016 03:14 PM, Arend van Spriel wrote: >>> On 18-08-16 16:17, Javier Martinez Canillas wrote: >>>> If request_irq() fails in mwifiex_sdio_probe_of(), only an error message >>>> is printed but the actual error is not propagated to the caller function. >>> >>> Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care. >>> >> >> Hmm, I'm not so sure about that. It's checking the wifiex_sdio_probe_of() >> return value. > > Ok. I looked at 4.7 sources on lxr [1]. > Oh, right. That was fixed quite recently indeed. >> If the IRQ request failing is not an error, then at the very least the call >> to disable_irq() should be avoided if request_irq() fails, and the message >> should be changed from dev_err() to dev_dgb() or dev_info(). > > agree. > >>> The device may still function without this wake interrupt. >>> >> >> That's correct, the binding says that the "interrupts" property in the child >> node is optional since is just a wakeup IRQ. Now the question is if should >> be an error if the IRQ is defined but fails to be requested. > > Clearly it indicates an error in the DT specification so behavior is not > as expected. Personally I would indeed consider it an error, but I was > just indicating that it might have done like this intentionally. > Yes, might had been done intentionally indeed but I don't think that is the case since the driver lacked error checking and propagation in many places. But if someone thinks that's better to not honor the DT and at least have the driver working without the wake up capability, then I'm happy to respin the patch and change the print log level to info/debug. > Regards, > Arend > Best regards,
Javier Martinez Canillas <javier@osg.samsung.com> wrote: > If request_irq() fails in mwifiex_sdio_probe_of(), only an error message > is printed but the actual error is not propagated to the caller function. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> What's the conclusion with this patch? Should I drop it or take it? (The discussion is available from the patchwork link in the signature.)
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c index d3e1561ca075..00727936ad6e 100644 --- a/drivers/net/wireless/marvell/mwifiex/sdio.c +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c @@ -125,6 +125,7 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card) dev_err(dev, "Failed to request irq_wifi %d (%d)\n", cfg->irq_wifi, ret); + return ret; } disable_irq(cfg->irq_wifi); }
If request_irq() fails in mwifiex_sdio_probe_of(), only an error message is printed but the actual error is not propagated to the caller function. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- drivers/net/wireless/marvell/mwifiex/sdio.c | 1 + 1 file changed, 1 insertion(+)