| Message ID | 20160829081613.1474-1-rmanohar@qti.qualcomm.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Kalle Valo |
| Headers | show |
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> wrote: > commit 7a0adc83f34d ("ath10k: improve tx scheduling") is causing > severe throughput drop in multi client mode. This issue is originally > reported in veriwave setup with 50 clients with TCP downlink traffic. > While increasing number of clients, the average throughput drops > gradually. With 50 clients, the combined peak throughput is decreased > to 98 Mbps whereas reverting given commit restored it to 550 Mbps. > > Processing txqs for every tx completion is causing overhead. Ideally for > management frame tx completion, pending txqs processing can be avoided. > The change partly reverts the commit "ath10k: improve tx scheduling". > Processing pending txqs after all skbs tx completion will yeild enough > room to burst tx frames. > > Fixes: 7a0adc83f34d ("ath10k: improve tx scheduling") > Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> I'm planning to queue this to 4.8 if no objections.
Kalle Valo <kvalo@qca.qualcomm.com> writes: > Rajkumar Manoharan <rmanohar@qti.qualcomm.com> wrote: >> commit 7a0adc83f34d ("ath10k: improve tx scheduling") is causing >> severe throughput drop in multi client mode. This issue is originally >> reported in veriwave setup with 50 clients with TCP downlink traffic. >> While increasing number of clients, the average throughput drops >> gradually. With 50 clients, the combined peak throughput is decreased >> to 98 Mbps whereas reverting given commit restored it to 550 Mbps. >> >> Processing txqs for every tx completion is causing overhead. Ideally for >> management frame tx completion, pending txqs processing can be avoided. >> The change partly reverts the commit "ath10k: improve tx scheduling". >> Processing pending txqs after all skbs tx completion will yeild enough >> room to burst tx frames. >> >> Fixes: 7a0adc83f34d ("ath10k: improve tx scheduling") >> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> > > I'm planning to queue this to 4.8 if no objections. Actually the patch doesn't apply to ath-current branch so I'll apply to ath-next instead.
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> wrote: > commit 7a0adc83f34d ("ath10k: improve tx scheduling") is causing > severe throughput drop in multi client mode. This issue is originally > reported in veriwave setup with 50 clients with TCP downlink traffic. > While increasing number of clients, the average throughput drops > gradually. With 50 clients, the combined peak throughput is decreased > to 98 Mbps whereas reverting given commit restored it to 550 Mbps. > > Processing txqs for every tx completion is causing overhead. Ideally for > management frame tx completion, pending txqs processing can be avoided. > The change partly reverts the commit "ath10k: improve tx scheduling". > Processing pending txqs after all skbs tx completion will yeild enough > room to burst tx frames. > > Fixes: 7a0adc83f34d ("ath10k: improve tx scheduling") > Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Thanks, 1 patch applied to ath-next branch of ath.git: 18f53fe0f303 ath10k: fix throughput regression in multi client mode
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index d3f8baf532d4..2d62921bcd4e 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -2445,6 +2445,8 @@ int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget) while (kfifo_get(&htt->txdone_fifo, &tx_done)) ath10k_txrx_tx_unref(htt, &tx_done); + ath10k_mac_tx_push_pending(ar); + spin_lock_irqsave(&htt->tx_fetch_ind_q.lock, flags); skb_queue_splice_init(&htt->tx_fetch_ind_q, &tx_ind_q); spin_unlock_irqrestore(&htt->tx_fetch_ind_q.lock, flags); diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index 98f3bb47414c..5d645f989ce2 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -125,8 +125,6 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt, ieee80211_tx_status(htt->ar->hw, msdu); /* we do not own the msdu anymore */ - ath10k_mac_tx_push_pending(ar); - return 0; }
commit 7a0adc83f34d ("ath10k: improve tx scheduling") is causing severe throughput drop in multi client mode. This issue is originally reported in veriwave setup with 50 clients with TCP downlink traffic. While increasing number of clients, the average throughput drops gradually. With 50 clients, the combined peak throughput is decreased to 98 Mbps whereas reverting given commit restored it to 550 Mbps. Processing txqs for every tx completion is causing overhead. Ideally for management frame tx completion, pending txqs processing can be avoided. The change partly reverts the commit "ath10k: improve tx scheduling". Processing pending txqs after all skbs tx completion will yeild enough room to burst tx frames. Fixes: 7a0adc83f34d ("ath10k: improve tx scheduling") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/htt_rx.c | 2 ++ drivers/net/wireless/ath/ath10k/txrx.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-)