diff mbox

[v2,1/7] clocksource: exynos_mct: Add the support for ARM64

Message ID 1472046551-703-2-git-send-email-cw00.choi@samsung.com (mailing list archive)
State Accepted
Headers show

Commit Message

Chanwoo Choi Aug. 24, 2016, 1:49 p.m. UTC
This patch adds the support for ARM 64bit. The delay_timer is only supported
on ARM 32bit.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clocksource/Kconfig      | 2 +-
 drivers/clocksource/exynos_mct.c | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Aug. 26, 2016, 4:02 p.m. UTC | #1
On Wed, Aug 24, 2016 at 10:49:05PM +0900, Chanwoo Choi wrote:
> This patch adds the support for ARM 64bit. The delay_timer is only supported
> on ARM 32bit.
> 
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  drivers/clocksource/Kconfig      | 2 +-
>  drivers/clocksource/exynos_mct.c | 4 ++++
>  2 files changed, 5 insertions(+), 1 deletion(-)

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Krzysztof Kozlowski Sept. 16, 2016, 11:10 a.m. UTC | #2
On 09/08/2016 01:04 PM, Daniel Lezcano wrote:
> On 24/08/2016 15:49, Chanwoo Choi wrote:
>> This patch adds the support for ARM 64bit. The delay_timer is only supported
>> on ARM 32bit.
>>
>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: Kukjin Kim <kgene@kernel.org>
>> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
> 
> I don't really like #ifdef in the code itself but I suppose there is no
> much choice.
> 
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Thanks, applied.
If needed, I can provide a stable tag to base on top of it.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 567788664723..ec443c318c77 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -351,7 +351,7 @@  config CLKSRC_METAG_GENERIC
 
 config CLKSRC_EXYNOS_MCT
 	bool "Exynos multi core timer driver" if COMPILE_TEST
-	depends on ARM
+	depends on ARM || ARM64
 	help
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 41840d02c331..8f3488b80896 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -223,6 +223,7 @@  static u64 notrace exynos4_read_sched_clock(void)
 	return exynos4_read_count_32();
 }
 
+#if defined(CONFIG_ARM)
 static struct delay_timer exynos4_delay_timer;
 
 static cycles_t exynos4_read_current_timer(void)
@@ -231,14 +232,17 @@  static cycles_t exynos4_read_current_timer(void)
 			 "cycles_t needs to move to 32-bit for ARM64 usage");
 	return exynos4_read_count_32();
 }
+#endif
 
 static int __init exynos4_clocksource_init(void)
 {
 	exynos4_mct_frc_start();
 
+#if defined(CONFIG_ARM)
 	exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
 	exynos4_delay_timer.freq = clk_rate;
 	register_current_timer_delay(&exynos4_delay_timer);
+#endif
 
 	if (clocksource_register_hz(&mct_frc, clk_rate))
 		panic("%s: can't register clocksource\n", mct_frc.name);