| Message ID | 1474583892-8936-1-git-send-email-rajatja@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
Hi Rajat, 在 2016/9/23 6:38, Rajat Jain 写道: > This increases the likelihood of link state to automatically go to L1 > and save some power. > > The default credit update interval of 7.5 us results in the rootport > sending UpdateFC packets too often, thus reulting in the link never Actually it's UpdateFC-P. Could you amend the log since you don't touch other DLLPs of flow control. > going to L1, and always staying in L0/L0s. The value 24 us was chosen > after some experiments and peeking over the PCIe bus to see that we do > enter L1 substate when there is not enough traffic on the PCIe bus. > The defualt value is wrong including the unit of this value on TRM. I talked with Brain face-2-face about this issue, so your patch is what we want. Thanks for pushing this. I guess Bjorn could help amend the changelog? With that fixed, Acked-by: Shawn Lin <shawn.lin@rock-chips.com> > Signed-off-by: Rajat Jain <rajatja@google.com> > --- > v2: Update the register on Phy link bandwidth changes, > since the value gets lost on such events. > > drivers/pci/host/pcie-rockchip.c | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c > index c3593e6..99e700f 100644 > --- a/drivers/pci/host/pcie-rockchip.c > +++ b/drivers/pci/host/pcie-rockchip.c > @@ -95,6 +95,11 @@ > #define PCIE_CORE_PL_CONF_SPEED_MASK 0x00000018 > #define PCIE_CORE_PL_CONF_LANE_MASK 0x00000006 > #define PCIE_CORE_PL_CONF_LANE_SHIFT 1 > +#define PCIE_CORE_TXCREDIT_CFG1 (PCIE_CORE_CTRL_MGMT_BASE + 0x020) > +#define PCIE_CORE_TXCREDIT_CFG1_MUI_MASK 0xFFFF0000 > +#define PCIE_CORE_TXCREDIT_CFG1_MUI_SHIFT 16 > +#define PCIE_CORE_TXCREDIT_CFG1_MUI_ENCODE(x) \ > + (((x) >> 3) << PCIE_CORE_TXCREDIT_CFG1_MUI_SHIFT) > #define PCIE_CORE_INT_STATUS (PCIE_CORE_CTRL_MGMT_BASE + 0x20c) > #define PCIE_CORE_INT_PRFPE BIT(0) > #define PCIE_CORE_INT_CRFPE BIT(1) > @@ -224,6 +229,17 @@ static void rockchip_pcie_clr_bw_int(struct rockchip_pcie *rockchip) > rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LCS); > } > > +static void rockchip_pcie_update_txcredit_mui(struct rockchip_pcie *rockchip) > +{ > + u32 val; > + > + /* Update Tx credit maximum update interval */ > + val = rockchip_pcie_read(rockchip, PCIE_CORE_TXCREDIT_CFG1); > + val &= ~PCIE_CORE_TXCREDIT_CFG1_MUI_MASK; > + val |= PCIE_CORE_TXCREDIT_CFG1_MUI_ENCODE(24000); /* ns */ > + rockchip_pcie_write(rockchip, val, PCIE_CORE_TXCREDIT_CFG1); > +} > + > static int rockchip_pcie_valid_device(struct rockchip_pcie *rockchip, > struct pci_bus *bus, int dev) > { > @@ -597,6 +613,7 @@ static irqreturn_t rockchip_pcie_subsys_irq_handler(int irq, void *arg) > rockchip_pcie_write(rockchip, sub_reg, PCIE_CORE_INT_STATUS); > } else if (reg & PCIE_CLIENT_INT_PHY) { > dev_dbg(dev, "phy link changes\n"); > + rockchip_pcie_update_txcredit_mui(rockchip); > rockchip_pcie_clr_bw_int(rockchip); > } > >
diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c index c3593e6..99e700f 100644 --- a/drivers/pci/host/pcie-rockchip.c +++ b/drivers/pci/host/pcie-rockchip.c @@ -95,6 +95,11 @@ #define PCIE_CORE_PL_CONF_SPEED_MASK 0x00000018 #define PCIE_CORE_PL_CONF_LANE_MASK 0x00000006 #define PCIE_CORE_PL_CONF_LANE_SHIFT 1 +#define PCIE_CORE_TXCREDIT_CFG1 (PCIE_CORE_CTRL_MGMT_BASE + 0x020) +#define PCIE_CORE_TXCREDIT_CFG1_MUI_MASK 0xFFFF0000 +#define PCIE_CORE_TXCREDIT_CFG1_MUI_SHIFT 16 +#define PCIE_CORE_TXCREDIT_CFG1_MUI_ENCODE(x) \ + (((x) >> 3) << PCIE_CORE_TXCREDIT_CFG1_MUI_SHIFT) #define PCIE_CORE_INT_STATUS (PCIE_CORE_CTRL_MGMT_BASE + 0x20c) #define PCIE_CORE_INT_PRFPE BIT(0) #define PCIE_CORE_INT_CRFPE BIT(1) @@ -224,6 +229,17 @@ static void rockchip_pcie_clr_bw_int(struct rockchip_pcie *rockchip) rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LCS); } +static void rockchip_pcie_update_txcredit_mui(struct rockchip_pcie *rockchip) +{ + u32 val; + + /* Update Tx credit maximum update interval */ + val = rockchip_pcie_read(rockchip, PCIE_CORE_TXCREDIT_CFG1); + val &= ~PCIE_CORE_TXCREDIT_CFG1_MUI_MASK; + val |= PCIE_CORE_TXCREDIT_CFG1_MUI_ENCODE(24000); /* ns */ + rockchip_pcie_write(rockchip, val, PCIE_CORE_TXCREDIT_CFG1); +} + static int rockchip_pcie_valid_device(struct rockchip_pcie *rockchip, struct pci_bus *bus, int dev) { @@ -597,6 +613,7 @@ static irqreturn_t rockchip_pcie_subsys_irq_handler(int irq, void *arg) rockchip_pcie_write(rockchip, sub_reg, PCIE_CORE_INT_STATUS); } else if (reg & PCIE_CLIENT_INT_PHY) { dev_dbg(dev, "phy link changes\n"); + rockchip_pcie_update_txcredit_mui(rockchip); rockchip_pcie_clr_bw_int(rockchip); }
This increases the likelihood of link state to automatically go to L1 and save some power. The default credit update interval of 7.5 us results in the rootport sending UpdateFC packets too often, thus reulting in the link never going to L1, and always staying in L0/L0s. The value 24 us was chosen after some experiments and peeking over the PCIe bus to see that we do enter L1 substate when there is not enough traffic on the PCIe bus. Signed-off-by: Rajat Jain <rajatja@google.com> --- v2: Update the register on Phy link bandwidth changes, since the value gets lost on such events. drivers/pci/host/pcie-rockchip.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)