Message ID | 1476561450-28407-3-git-send-email-robert.jarzmik@free.fr (mailing list archive) |
---|---|
State | Changes Requested, archived |
Headers | show |
On 15-10-16, 21:57, Robert Jarzmik wrote: > Add the relevant data taken from the PXA 25x Electrical, Mechanical, and > Thermal Specfication. This will be input data for cpufreq-dt driver. > > Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> > --- > arch/arm/boot/dts/pxa25x.dtsi | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi > index 0d1e012178c4..16b4e8bad4a5 100644 > --- a/arch/arm/boot/dts/pxa25x.dtsi > +++ b/arch/arm/boot/dts/pxa25x.dtsi > @@ -89,4 +89,29 @@ > clocks = <&clktimer>; > status = "okay"; > }; > + > + pxa250_opp_table: opp_table0 { > + compatible = "operating-points-v2"; > + > + opp@99500 { We have been keeping the values in ^^^ same as the values present below. Any specific reason for making it different here ? > + opp-hz = /bits/ 64 <99532800>; > + opp-microvolt = <950000 1000000 1650000>; > + clock-latency-ns = <20>; > + }; > + opp@199100 { > + opp-hz = /bits/ 64 <199065600>; > + opp-microvolt = <1000000 950000 1650000>; > + clock-latency-ns = <20>; > + }; > + opp@298600 { > + opp-hz = /bits/ 64 <298598400>; > + opp-microvolt = <1100000 1045000 1650000>; > + clock-latency-ns = <20>; > + }; > + opp@398100 { > + opp-hz = /bits/ 64 <398131200>; > + opp-microvolt = <1300000 1235000 1650000>; > + clock-latency-ns = <20>; > + }; > + }; > }; > -- > 2.1.4
Viresh Kumar <viresh.kumar@linaro.org> writes: > On 15-10-16, 21:57, Robert Jarzmik wrote: >> Add the relevant data taken from the PXA 25x Electrical, Mechanical, and >> Thermal Specfication. This will be input data for cpufreq-dt driver. >> >> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> >> --- >> arch/arm/boot/dts/pxa25x.dtsi | 25 +++++++++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> >> diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi >> index 0d1e012178c4..16b4e8bad4a5 100644 >> --- a/arch/arm/boot/dts/pxa25x.dtsi >> +++ b/arch/arm/boot/dts/pxa25x.dtsi >> @@ -89,4 +89,29 @@ >> clocks = <&clktimer>; >> status = "okay"; >> }; >> + >> + pxa250_opp_table: opp_table0 { >> + compatible = "operating-points-v2"; >> + >> + opp@99500 { > > We have been keeping the values in ^^^ same as the values present > below. Any specific reason for making it different here ? No, that's a good comment, I'll change that. I wrote this incrementaly, first the node, then the opp-hz. Then I realized that the source crystal, at 3.8684 MHz didn't provide a round 99.5 MHz core clock, but a 99.5328 MHz clock. Anyway, I'll change that ... let's say into opp@99533 in this case ?
On 18-10-16, 17:30, Robert Jarzmik wrote: > Viresh Kumar <viresh.kumar@linaro.org> writes: > > > On 15-10-16, 21:57, Robert Jarzmik wrote: > >> Add the relevant data taken from the PXA 25x Electrical, Mechanical, and > >> Thermal Specfication. This will be input data for cpufreq-dt driver. > >> > >> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> > >> --- > >> arch/arm/boot/dts/pxa25x.dtsi | 25 +++++++++++++++++++++++++ > >> 1 file changed, 25 insertions(+) > >> > >> diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi > >> index 0d1e012178c4..16b4e8bad4a5 100644 > >> --- a/arch/arm/boot/dts/pxa25x.dtsi > >> +++ b/arch/arm/boot/dts/pxa25x.dtsi > >> @@ -89,4 +89,29 @@ > >> clocks = <&clktimer>; > >> status = "okay"; > >> }; > >> + > >> + pxa250_opp_table: opp_table0 { > >> + compatible = "operating-points-v2"; > >> + > >> + opp@99500 { > > > > We have been keeping the values in ^^^ same as the values present > > below. Any specific reason for making it different here ? > No, that's a good comment, I'll change that. > > I wrote this incrementaly, first the node, then the opp-hz. Then I realized that > the source crystal, at 3.8684 MHz didn't provide a round 99.5 MHz core clock, > but a 99.5328 MHz clock. > > Anyway, I'll change that ... let's say into opp@99533 in this case ? Just write the whole value 99532800.
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index 0d1e012178c4..16b4e8bad4a5 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -89,4 +89,29 @@ clocks = <&clktimer>; status = "okay"; }; + + pxa250_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@99500 { + opp-hz = /bits/ 64 <99532800>; + opp-microvolt = <950000 1000000 1650000>; + clock-latency-ns = <20>; + }; + opp@199100 { + opp-hz = /bits/ 64 <199065600>; + opp-microvolt = <1000000 950000 1650000>; + clock-latency-ns = <20>; + }; + opp@298600 { + opp-hz = /bits/ 64 <298598400>; + opp-microvolt = <1100000 1045000 1650000>; + clock-latency-ns = <20>; + }; + opp@398100 { + opp-hz = /bits/ 64 <398131200>; + opp-microvolt = <1300000 1235000 1650000>; + clock-latency-ns = <20>; + }; + }; };
Add the relevant data taken from the PXA 25x Electrical, Mechanical, and Thermal Specfication. This will be input data for cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- arch/arm/boot/dts/pxa25x.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)