diff mbox

arm64: dts: exynos: Replace small letter of base address/offset on Exynos5433

Message ID 1484096148-17120-1-git-send-email-cw00.choi@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chanwoo Choi Jan. 11, 2017, 12:55 a.m. UTC
This patch replaces the small letter of base address, offset and hex value
with the capital letter to keep the consistency on Exynos5433.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Andi Shyti Jan. 11, 2017, 1:11 a.m. UTC | #1
Hi Chanwoo,

> This patch replaces the small letter of base address, offset and hex value
> with the capital letter to keep the consistency on Exynos5433.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Reviewed-by: Andi Shyti <andi.shyti@samsung.com>

You will make Krzysztof happy by guessing the correct subject :)

Andi
Krzysztof Kozlowski Jan. 11, 2017, 4:26 p.m. UTC | #2
On Wed, Jan 11, 2017 at 09:55:48AM +0900, Chanwoo Choi wrote:
> This patch replaces the small letter of base address, offset and hex value
> with the capital letter to keep the consistency on Exynos5433.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index abaf6b4d599d..d7ed1a68b6fd 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -231,7 +231,7 @@
>  		compatible = "arm,psci";
>  		method = "smc";
>  		cpu_off = <0x84000002>;
> -		cpu_on = <0xC4000003>;
> +		cpu_on = <0xc4000003>;

There is no point of such "improvements". This is just unnecessary
churn.

Sometimes such things are accepted as part of some bigger work (vide
recent Andrzej's sysmmu for HDMI/TV). But on its own? No sense at all.

Best regards,
Krzysztof
Rob Herring (Arm) Jan. 11, 2017, 9:15 p.m. UTC | #3
On Wed, Jan 11, 2017 at 09:55:48AM +0900, Chanwoo Choi wrote:
> This patch replaces the small letter of base address, offset and hex value
> with the capital letter to keep the consistency on Exynos5433.

You mean the other way around, right?

> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index abaf6b4d599d..d7ed1a68b6fd 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -231,7 +231,7 @@
>  		compatible = "arm,psci";
>  		method = "smc";
>  		cpu_off = <0x84000002>;
> -		cpu_on = <0xC4000003>;
> +		cpu_on = <0xc4000003>;
>  	};
>  
>  	reboot: syscon-reboot {
> @@ -753,7 +753,7 @@
>  
>  		dsi: dsi@13900000 {
>  			compatible = "samsung,exynos5433-mipi-dsi";
> -			reg = <0x13900000 0xC0>;
> +			reg = <0x13900000 0xc0>;
>  			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
>  			phys = <&mipi_phy 1>;
>  			phy-names = "dsim";
> @@ -880,9 +880,9 @@
>  			iommus = <&sysmmu_jpeg>;
>  		};
>  
> -		mfc: codec@152E0000 {
> +		mfc: codec@152e0000 {
>  			compatible = "samsung,exynos5433-mfc";
> -			reg = <0x152E0000 0x10000>;
> +			reg = <0x152e0000 0x10000>;
>  			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "pclk", "aclk", "aclk_xiu";
>  			clocks = <&cmu_mfc CLK_PCLK_MFC>,
> @@ -914,7 +914,7 @@
>  
>  		sysmmu_gscl0: sysmmu@13c80000 {
>  			compatible = "samsung,exynos-sysmmu";
> -			reg = <0x13C80000 0x1000>;
> +			reg = <0x13c80000 0x1000>;
>  			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "aclk", "pclk";
>  			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
> @@ -924,7 +924,7 @@
>  
>  		sysmmu_gscl1: sysmmu@13c90000 {
>  			compatible = "samsung,exynos-sysmmu";
> -			reg = <0x13C90000 0x1000>;
> +			reg = <0x13c90000 0x1000>;
>  			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "aclk", "pclk";
>  			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
> @@ -934,7 +934,7 @@
>  
>  		sysmmu_gscl2: sysmmu@13ca0000 {
>  			compatible = "samsung,exynos-sysmmu";
> -			reg = <0x13CA0000 0x1000>;
> +			reg = <0x13ca0000 0x1000>;
>  			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "aclk", "pclk";
>  			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
> -- 
> 1.9.1
>
Chanwoo Choi Jan. 11, 2017, 9:22 p.m. UTC | #4
2017-01-12 1:26 GMT+09:00 Krzysztof Kozlowski <krzk@kernel.org>:
> On Wed, Jan 11, 2017 at 09:55:48AM +0900, Chanwoo Choi wrote:
>> This patch replaces the small letter of base address, offset and hex value
>> with the capital letter to keep the consistency on Exynos5433.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> index abaf6b4d599d..d7ed1a68b6fd 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> @@ -231,7 +231,7 @@
>>               compatible = "arm,psci";
>>               method = "smc";
>>               cpu_off = <0x84000002>;
>> -             cpu_on = <0xC4000003>;
>> +             cpu_on = <0xc4000003>;
>
> There is no point of such "improvements". This is just unnecessary
> churn.
>
> Sometimes such things are accepted as part of some bigger work (vide
> recent Andrzej's sysmmu for HDMI/TV). But on its own? No sense at all.

Do you mean that this patch is not reasonable? or
The modification of cpu_on property is only not reasonable?

It is simple for the consistency to use the hex value in dts file.
Chanwoo Choi Jan. 11, 2017, 9:30 p.m. UTC | #5
2017-01-12 6:15 GMT+09:00 Rob Herring <robh@kernel.org>:
> On Wed, Jan 11, 2017 at 09:55:48AM +0900, Chanwoo Choi wrote:
>> This patch replaces the small letter of base address, offset and hex value
>> with the capital letter to keep the consistency on Exynos5433.
>
> You mean the other way around, right?

When I posted the dts patches, I got the comment that small letter is better
for base address/offset. (It doesn’t mean that all dts file in Linux Kernel
have to use the small letter of base address and offset.)

This dts uses the both capital and small letter for each base address/offset.
Almost hex value already uses the small letter. If possible, I hope to use
the one style (small letter).

>
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> index abaf6b4d599d..d7ed1a68b6fd 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> @@ -231,7 +231,7 @@
>>               compatible = "arm,psci";
>>               method = "smc";
>>               cpu_off = <0x84000002>;
>> -             cpu_on = <0xC4000003>;
>> +             cpu_on = <0xc4000003>;
>>       };
>>
>>       reboot: syscon-reboot {
>> @@ -753,7 +753,7 @@
>>
>>               dsi: dsi@13900000 {
>>                       compatible = "samsung,exynos5433-mipi-dsi";
>> -                     reg = <0x13900000 0xC0>;
>> +                     reg = <0x13900000 0xc0>;
>>                       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
>>                       phys = <&mipi_phy 1>;
>>                       phy-names = "dsim";
>> @@ -880,9 +880,9 @@
>>                       iommus = <&sysmmu_jpeg>;
>>               };
>>
>> -             mfc: codec@152E0000 {
>> +             mfc: codec@152e0000 {
>>                       compatible = "samsung,exynos5433-mfc";
>> -                     reg = <0x152E0000 0x10000>;
>> +                     reg = <0x152e0000 0x10000>;
>>                       interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "pclk", "aclk", "aclk_xiu";
>>                       clocks = <&cmu_mfc CLK_PCLK_MFC>,
>> @@ -914,7 +914,7 @@
>>
>>               sysmmu_gscl0: sysmmu@13c80000 {
>>                       compatible = "samsung,exynos-sysmmu";
>> -                     reg = <0x13C80000 0x1000>;
>> +                     reg = <0x13c80000 0x1000>;
>>                       interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "aclk", "pclk";
>>                       clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
>> @@ -924,7 +924,7 @@
>>
>>               sysmmu_gscl1: sysmmu@13c90000 {
>>                       compatible = "samsung,exynos-sysmmu";
>> -                     reg = <0x13C90000 0x1000>;
>> +                     reg = <0x13c90000 0x1000>;
>>                       interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "aclk", "pclk";
>>                       clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
>> @@ -934,7 +934,7 @@
>>
>>               sysmmu_gscl2: sysmmu@13ca0000 {
>>                       compatible = "samsung,exynos-sysmmu";
>> -                     reg = <0x13CA0000 0x1000>;
>> +                     reg = <0x13ca0000 0x1000>;
>>                       interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "aclk", "pclk";
>>                       clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
>> --
>> 1.9.1
>>
Krzysztof Kozlowski Jan. 12, 2017, 6:34 a.m. UTC | #6
On Wed, Jan 11, 2017 at 11:22 PM, Chanwoo Choi <cwchoi00@gmail.com> wrote:
> 2017-01-12 1:26 GMT+09:00 Krzysztof Kozlowski <krzk@kernel.org>:
>> On Wed, Jan 11, 2017 at 09:55:48AM +0900, Chanwoo Choi wrote:
>>> This patch replaces the small letter of base address, offset and hex value
>>> with the capital letter to keep the consistency on Exynos5433.
>>>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>>> ---
>>>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
>>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>>> index abaf6b4d599d..d7ed1a68b6fd 100644
>>> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>>> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>>> @@ -231,7 +231,7 @@
>>>               compatible = "arm,psci";
>>>               method = "smc";
>>>               cpu_off = <0x84000002>;
>>> -             cpu_on = <0xC4000003>;
>>> +             cpu_on = <0xc4000003>;
>>
>> There is no point of such "improvements". This is just unnecessary
>> churn.
>>
>> Sometimes such things are accepted as part of some bigger work (vide
>> recent Andrzej's sysmmu for HDMI/TV). But on its own? No sense at all.
>
> Do you mean that this patch is not reasonable? or
> The modification of cpu_on property is only not reasonable?
>
> It is simple for the consistency to use the hex value in dts file.

The patch is not reasonable (as sent alone).

Best regards,
Krzysztof
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index abaf6b4d599d..d7ed1a68b6fd 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -231,7 +231,7 @@ 
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	reboot: syscon-reboot {
@@ -753,7 +753,7 @@ 
 
 		dsi: dsi@13900000 {
 			compatible = "samsung,exynos5433-mipi-dsi";
-			reg = <0x13900000 0xC0>;
+			reg = <0x13900000 0xc0>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
@@ -880,9 +880,9 @@ 
 			iommus = <&sysmmu_jpeg>;
 		};
 
-		mfc: codec@152E0000 {
+		mfc: codec@152e0000 {
 			compatible = "samsung,exynos5433-mfc";
-			reg = <0x152E0000 0x10000>;
+			reg = <0x152e0000 0x10000>;
 			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "pclk", "aclk", "aclk_xiu";
 			clocks = <&cmu_mfc CLK_PCLK_MFC>,
@@ -914,7 +914,7 @@ 
 
 		sysmmu_gscl0: sysmmu@13c80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C80000 0x1000>;
+			reg = <0x13c80000 0x1000>;
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
@@ -924,7 +924,7 @@ 
 
 		sysmmu_gscl1: sysmmu@13c90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C90000 0x1000>;
+			reg = <0x13c90000 0x1000>;
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
@@ -934,7 +934,7 @@ 
 
 		sysmmu_gscl2: sysmmu@13ca0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13CA0000 0x1000>;
+			reg = <0x13ca0000 0x1000>;
 			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,