diff mbox

[v2,2/2] ARM: sun8i: dt: Add mali node

Message ID 681511dd6370b9146ae8e3f8009eba1e15d36cc0.1485180017.git-series.maxime.ripard@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard Jan. 23, 2017, 2 p.m. UTC
The A23 and A33 have an ARM Mali 400 GPU. Now that we have a binding, add
it to our DT.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sun8i-a23-a33.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+), 0 deletions(-)

Comments

Rob Herring (Arm) Jan. 27, 2017, 8:21 p.m. UTC | #1
On Mon, Jan 23, 2017 at 03:00:46PM +0100, Maxime Ripard wrote:
> The A23 and A33 have an ARM Mali 400 GPU. Now that we have a binding, add
> it to our DT.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  arch/arm/boot/dts/sun8i-a23-a33.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
> index e4991a78ad73..982705719ef2 100644
> --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
> @@ -486,6 +486,32 @@
>  			#size-cells = <0>;
>  		};
>  
> +		mali: gpu@01c40000 {

Drop leading 0.

> +			compatible = "allwinner,sun8i-a23-mali",
> +				     "allwinner,sun7i-a20-mali", "arm,mali-400";
> +			reg = <0x01c40000 0x10000>;

Does this really use 64K or that's just the register spacing? Set it to 
what's used.

> +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "gp",
> +					  "gpmmu",
> +					  "pp0",
> +					  "ppmmu0",
> +					  "pp1",
> +					  "ppmmu1",
> +					  "pmu";
> +			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
> +			clock-names = "bus", "core";
> +			resets = <&ccu RST_BUS_GPU>;
> +
> +			assigned-clocks = <&ccu CLK_GPU>;
> +			assigned-clock-rates = <408000000>;
> +		};
> +
>  		gic: interrupt-controller@01c81000 {
>  			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
>  			reg = <0x01c81000 0x1000>,
> -- 
> git-series 0.8.11
Maxime Ripard Jan. 30, 2017, 2 p.m. UTC | #2
Hi Rob,

On Fri, Jan 27, 2017 at 02:21:19PM -0600, Rob Herring wrote:
> On Mon, Jan 23, 2017 at 03:00:46PM +0100, Maxime Ripard wrote:
> > The A23 and A33 have an ARM Mali 400 GPU. Now that we have a binding, add
> > it to our DT.
> > 
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> >  arch/arm/boot/dts/sun8i-a23-a33.dtsi | 26 ++++++++++++++++++++++++++
> >  1 file changed, 26 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
> > index e4991a78ad73..982705719ef2 100644
> > --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
> > @@ -486,6 +486,32 @@
> >  			#size-cells = <0>;
> >  		};
> >  
> > +		mali: gpu@01c40000 {
> 
> Drop leading 0.
> 
> > +			compatible = "allwinner,sun8i-a23-mali",
> > +				     "allwinner,sun7i-a20-mali", "arm,mali-400";
> > +			reg = <0x01c40000 0x10000>;
> 
> Does this really use 64K or that's just the register spacing? Set it
> to what's used.

The memory maps in our datasheet allocates 64k for that block. I
always thought that we had to put the size of the whole memory block
allocated to that device.

For now, the driver only uses space up to 0xe000 (so we wouldn't
"waste" a lot of space anyway), but what if at some point the driver
needs more than what we put in the DT?

Thanks,
Maxime
Rob Herring (Arm) Jan. 30, 2017, 4:40 p.m. UTC | #3
On Mon, Jan 30, 2017 at 8:00 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Hi Rob,
>
> On Fri, Jan 27, 2017 at 02:21:19PM -0600, Rob Herring wrote:
>> On Mon, Jan 23, 2017 at 03:00:46PM +0100, Maxime Ripard wrote:
>> > The A23 and A33 have an ARM Mali 400 GPU. Now that we have a binding, add
>> > it to our DT.
>> >
>> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>> > ---
>> >  arch/arm/boot/dts/sun8i-a23-a33.dtsi | 26 ++++++++++++++++++++++++++
>> >  1 file changed, 26 insertions(+), 0 deletions(-)
>> >
>> > diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
>> > index e4991a78ad73..982705719ef2 100644
>> > --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
>> > +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
>> > @@ -486,6 +486,32 @@
>> >                     #size-cells = <0>;
>> >             };
>> >
>> > +           mali: gpu@01c40000 {
>>
>> Drop leading 0.
>>
>> > +                   compatible = "allwinner,sun8i-a23-mali",
>> > +                                "allwinner,sun7i-a20-mali", "arm,mali-400";
>> > +                   reg = <0x01c40000 0x10000>;
>>
>> Does this really use 64K or that's just the register spacing? Set it
>> to what's used.
>
> The memory maps in our datasheet allocates 64k for that block. I
> always thought that we had to put the size of the whole memory block
> allocated to that device.
>
> For now, the driver only uses space up to 0xe000 (so we wouldn't
> "waste" a lot of space anyway), but what if at some point the driver
> needs more than what we put in the DT?

Well, it should be what the h/w is, not what the driver needs.

I only asked because 64K spacing of peripherals is becoming common,
but that wastes a bit of virtual address space on 32-bit if really the
h/w registers are only <4KB. Given that it is 0xe000 in this case, it
doesn't really matter here.

Rob
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index e4991a78ad73..982705719ef2 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -486,6 +486,32 @@ 
 			#size-cells = <0>;
 		};
 
+		mali: gpu@01c40000 {
+			compatible = "allwinner,sun8i-a23-mali",
+				     "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <408000000>;
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,