diff mbox

[1/1] MicroSemi Switchtec management interface driver

Message ID 1485882204-26947-2-git-send-email-logang@deltatee.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Logan Gunthorpe Jan. 31, 2017, 5:03 p.m. UTC
Microsemi's "Switchtec" line of PCI switch devices is already well
supported by the kernel with standard PCI switch drivers. However, the
Switchtec device advertises a special management endpoint with a separate
PCI function address and class code. This endpoint enables some additional
functionality which includes:

 * Packet and Byte Counters
 * Switch Firmware Upgrades
 * Event and Error logs
 * Querying port link status
 * Custom user firmware commands

This patch introduces the switchtec kernel module which provides
PCI driver that exposes a char device. The char device provides
userspace access to this interface through read, write and (optionally)
poll calls. A couple of special IOCTLs are provided to:

* Inform userspace of firmware partition locations
* Pass event counts and allow userspace to wait on events

A short text file is provided which documents the switchtec driver,
outlines the semantics of using the char device and describes the
IOCTLs.

The device also exposes a few read-only sysfs attributes which provide
some device information component names and versions which is provided
by the hardware. These are documented in
Documentation/ABI/testing/sysfs-class-switchtec

A userspace tool and library which utilizes this interface is available
at [1]. This tool takes inspiration (and borrows some code) from
nvme-cli [2]. The tool is largely complete at this time but additional
features may be added in the future.

[1] https://github.com/sbates130272/switchtec-user
[2] https://github.com/linux-nvme/nvme-cli

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Stephen Bates <stephen.bates@microsemi.com>
---
 Documentation/ABI/testing/sysfs-class-switchtec |   96 ++
 Documentation/ioctl/ioctl-number.txt            |    1 +
 Documentation/switchtec.txt                     |   80 ++
 MAINTAINERS                                     |   11 +
 drivers/pci/Kconfig                             |    1 +
 drivers/pci/Makefile                            |    1 +
 drivers/pci/switch/Kconfig                      |   13 +
 drivers/pci/switch/Makefile                     |    1 +
 drivers/pci/switch/switchtec.c                  | 1320 +++++++++++++++++++++++
 drivers/pci/switch/switchtec.h                  |  266 +++++
 include/uapi/linux/switchtec_ioctl.h            |  129 +++
 11 files changed, 1919 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-switchtec
 create mode 100644 Documentation/switchtec.txt
 create mode 100644 drivers/pci/switch/Kconfig
 create mode 100644 drivers/pci/switch/Makefile
 create mode 100644 drivers/pci/switch/switchtec.c
 create mode 100644 drivers/pci/switch/switchtec.h
 create mode 100644 include/uapi/linux/switchtec_ioctl.h

Comments

Logan Gunthorpe Jan. 31, 2017, 5:35 p.m. UTC | #1
On 31/01/17 10:26 AM, Greg Kroah-Hartman wrote:
> That's one big patch to review, would you want to do that?

Sorry, will do.

> Can you break it up into smaller parts?  At least put the documentation
> separately, right?

Ha, funny. Last time I sent a patch someone asked for the documentation
to be in the same patch. But I can easily split this up.

> And don't dump a .txt file into Documentation/ anymore, people are
> working to move to the newer format.

Fair. I wasn't sure where a good place to put it was. Any suggestions?

> Also, please rebase against Linus's tree at the least, we can't go back
> in time and apply this to the 4.9 kernel tree.

Will do.

> Why a .h file for a single .c file?

I wanted to keep the hardware defining structs and macros in a separate
file for future expansion. This hardware is also capable of some NTB
functions which may find it's way into the kernel in the future.

> Also, why a whole new directory?

We didn't feel it fit in the pci director which was for standard pci
stuff. We're more than open to other suggestions as to where this code
belongs.

Thanks,

Logan

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Corbet Jan. 31, 2017, 5:49 p.m. UTC | #2
On Tue, 31 Jan 2017 10:35:44 -0700
Logan Gunthorpe <logang@deltatee.com> wrote:

> > And don't dump a .txt file into Documentation/ anymore, people are
> > working to move to the newer format.  
> 
> Fair. I wasn't sure where a good place to put it was. Any suggestions?

We're working toward a rational document hierarchy using the sphinx system:

	https://lwn.net/Articles/692704/
	https://lwn.net/Articles/692704/
	https://static.lwn.net/kerneldoc/doc-guide/index.html

The good news is that your switchtec.txt file is already 99% in the RST
format, so there is little or nothing to do there.

The bad news is that we don't quite have a place for it yet.  This is
really user-space developer documentation, and we don't have a sub-book
for that.  I expect that to change pretty soon, and I might even toss
together a bare beginning for 4.11, but that hasn't happened yet.

If you would like to learn the ropes and make one, that would be more than
great :)  Alternatively, I'd suggest just leaving the document as-is, and
I'll put it toward the top of the list of things to move into place once I
get that book started.

Thanks,

jon
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
kernel test robot Jan. 31, 2017, 6:21 p.m. UTC | #3
Hi Logan,

[auto build test ERROR on pci/next]
[also build test ERROR on v4.10-rc6 next-20170130]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Logan-Gunthorpe/MicroSemi-Switchtec-management-interface-driver/20170201-011235
base:   https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next
config: i386-allmodconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All error/warnings (new ones prefixed by >>):

   drivers/pci/switch/switchtec.c: In function 'stdev_is_alive':
>> drivers/pci/switch/switchtec.c:120:14: warning: return makes integer from pointer without a cast [-Wint-conversion]
     return stdev->mmio;
            ~~~~~^~~~~~
   drivers/pci/switch/switchtec.c: In function 'switchtec_init_msi_isr':
>> drivers/pci/switch/switchtec.c:1075:7: error: implicit declaration of function 'pci_enable_msi_range' [-Werror=implicit-function-declaration]
     rc = pci_enable_msi_range(pdev, 1, 4);
          ^~~~~~~~~~~~~~~~~~~~
   drivers/pci/switch/switchtec.c: In function 'switchtec_dev_ioctl':
>> drivers/pci/switch/switchtec.c:758:3: warning: 'nr_idxs' may be used uninitialized in this function [-Wmaybe-uninitialized]
      for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
      ^~~
   drivers/pci/switch/switchtec.c:741:6: note: 'nr_idxs' was declared here
     int nr_idxs;
         ^~~~~~~
   drivers/pci/switch/switchtec.c: In function 'switchtec_pci_probe':
>> drivers/pci/switch/switchtec.c:1174:50: warning: 'partition' may be used uninitialized in this function [-Wmaybe-uninitialized]
     stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[partition];
                                                     ^
   drivers/pci/switch/switchtec.c:1153:6: note: 'partition' was declared here
     int partition;
         ^~~~~~~~~
   cc1: some warnings being treated as errors

vim +/pci_enable_msi_range +1075 drivers/pci/switch/switchtec.c

  1069	static int switchtec_init_msi_isr(struct switchtec_dev *stdev)
  1070	{
  1071		int rc;
  1072		struct pci_dev *pdev = stdev->pdev;
  1073	
  1074		/* Try to set up msi irq */
> 1075		rc = pci_enable_msi_range(pdev, 1, 4);
  1076		if (rc < 0)
  1077			return rc;
  1078	
  1079		stdev->event_irq = ioread32(&stdev->mmio_part_cfg->vep_vector_number);
  1080		if (stdev->event_irq < 0 || stdev->event_irq >= 4) {
  1081			rc = -EFAULT;
  1082			goto err_msi_request;
  1083		}
  1084	
  1085		stdev->event_irq = pdev->irq + stdev->event_irq;
  1086		dev_dbg(&stdev->dev, "Using msi interrupts: event_irq=%d\n",
  1087			stdev->event_irq);
  1088	
  1089		return 0;
  1090	
  1091	err_msi_request:
  1092		pci_disable_msi(pdev);
  1093		return rc;
  1094	}
  1095	
  1096	static int switchtec_init_isr(struct switchtec_dev *stdev)
  1097	{
  1098		int rc;
  1099	
  1100		rc = switchtec_init_msix_isr(stdev);
  1101		if (rc)
  1102			rc = switchtec_init_msi_isr(stdev);
  1103	
  1104		if (rc)
  1105			return rc;
  1106	
  1107		rc = devm_request_irq(&stdev->pdev->dev, stdev->event_irq,
  1108				      switchtec_event_isr, 0, KBUILD_MODNAME, stdev);
  1109	
  1110		return rc;
  1111	}
  1112	
  1113	static void switchtec_deinit_isr(struct switchtec_dev *stdev)
  1114	{
  1115		devm_free_irq(&stdev->pdev->dev, stdev->event_irq, stdev);
  1116		pci_disable_msix(stdev->pdev);
  1117		pci_disable_msi(stdev->pdev);
  1118	}
  1119	
  1120	static void init_pff(struct switchtec_dev *stdev)
  1121	{
  1122		int i;
  1123		u32 reg;
  1124		struct part_cfg_regs *pcfg = stdev->mmio_part_cfg;
  1125	
  1126		for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
  1127			reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
  1128			if (reg != MICROSEMI_VENDOR_ID)
  1129				break;
  1130		}
  1131	
  1132		stdev->pff_csr_count = i;
  1133	
  1134		reg = ioread32(&pcfg->usp_pff_inst_id);
  1135		if (reg < SWITCHTEC_MAX_PFF_CSR)
  1136			stdev->pff_local[reg] = 1;
  1137	
  1138		reg = ioread32(&pcfg->vep_pff_inst_id);
  1139		if (reg < SWITCHTEC_MAX_PFF_CSR)
  1140			stdev->pff_local[reg] = 1;
  1141	
  1142		for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
  1143			reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
  1144			if (reg < SWITCHTEC_MAX_PFF_CSR)
  1145				stdev->pff_local[reg] = 1;
  1146		}
  1147	}
  1148	
  1149	static int switchtec_init_pci(struct switchtec_dev *stdev,
  1150				      struct pci_dev *pdev)
  1151	{
  1152		int rc;
  1153		int partition;
  1154	
  1155		rc = pcim_enable_device(pdev);
  1156		if (rc)
  1157			return rc;
  1158	
  1159		rc = pcim_iomap_regions(pdev, 0x1, KBUILD_MODNAME);
  1160		if (rc)
  1161			return rc;
  1162	
  1163		pci_set_master(pdev);
  1164	
  1165		stdev->mmio = pcim_iomap_table(pdev)[0];
  1166		stdev->mmio_mrpc = stdev->mmio + SWITCHTEC_GAS_MRPC_OFFSET;
  1167		stdev->mmio_sw_event = stdev->mmio + SWITCHTEC_GAS_SW_EVENT_OFFSET;
  1168		stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
  1169		stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
  1170		stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
  1171		stdev->partition = ioread8(&stdev->mmio_ntb->partition_id);
  1172		stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
  1173		stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
> 1174		stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[partition];
  1175		stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
  1176	
  1177		init_pff(stdev);

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Logan Gunthorpe Jan. 31, 2017, 6:32 p.m. UTC | #4
On 31/01/17 10:49 AM, Jonathan Corbet wrote:
> The good news is that your switchtec.txt file is already 99% in the RST
> format, so there is little or nothing to do there.
> 
> The bad news is that we don't quite have a place for it yet.  This is
> really user-space developer documentation, and we don't have a sub-book
> for that.  I expect that to change pretty soon, and I might even toss
> together a bare beginning for 4.11, but that hasn't happened yet.
> 
> If you would like to learn the ropes and make one, that would be more than
> great :)  Alternatively, I'd suggest just leaving the document as-is, and
> I'll put it toward the top of the list of things to move into place once I
> get that book started.

Thanks Jon. I took a look at the documentation and it doesn't look too
difficult. But I don't really feel qualified to make some of the
decisions necessary to create the new book. (ie names, locations, etc.)
And I don't really want that churn in this patchset. So we'll leave it
where it is for now.

I have cleaned up some of the RST format for v2 though.

Logan
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Greg Kroah-Hartman Jan. 31, 2017, 6:57 p.m. UTC | #5
On Tue, Jan 31, 2017 at 10:35:44AM -0700, Logan Gunthorpe wrote:
> 
> 
> On 31/01/17 10:26 AM, Greg Kroah-Hartman wrote:
> > That's one big patch to review, would you want to do that?
> 
> Sorry, will do.
> 
> > Can you break it up into smaller parts?  At least put the documentation
> > separately, right?
> 
> Ha, funny. Last time I sent a patch someone asked for the documentation
> to be in the same patch. But I can easily split this up.

Sorry, it was probably me :)

> > And don't dump a .txt file into Documentation/ anymore, people are
> > working to move to the newer format.
> 
> Fair. I wasn't sure where a good place to put it was. Any suggestions?

Why do you need this?  Wherever you put it, it should be built as part
of the online kernel documentation.  Who is the audience for this
documentation?

> > Also, please rebase against Linus's tree at the least, we can't go back
> > in time and apply this to the 4.9 kernel tree.
> 
> Will do.
> 
> > Why a .h file for a single .c file?
> 
> I wanted to keep the hardware defining structs and macros in a separate
> file for future expansion. This hardware is also capable of some NTB
> functions which may find it's way into the kernel in the future.

Do future stuff in the future, no need for that now, right?

Simple is best.

> > Also, why a whole new directory?
> 
> We didn't feel it fit in the pci director which was for standard pci
> stuff. We're more than open to other suggestions as to where this code
> belongs.

I'll leave that up to the PCI maintainer, but just a single .c file in a
subdir seems odd to me.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Logan Gunthorpe Jan. 31, 2017, 7:04 p.m. UTC | #6
On 31/01/17 11:57 AM, Greg Kroah-Hartman wrote:
> Sorry, it was probably me :)

Nope, it was Christoph Hellwig. I don't mind changing it. It's just hard
to know what's expected all the time.

> Why do you need this?  Wherever you put it, it should be built as part
> of the online kernel documentation.  Who is the audience for this
> documentation?

Well usually documenting how to use the device is a good thing. Is it
not? The audience would be people wanting to make use of the userspace
interface. Though in fairness, the vast majority of people should use
our library. I also thought it would be useful to reviewers to more
quickly understand the interface we are creating. If maintainers want us
to leave it out, we can, but that seems like an odd request.

> Do future stuff in the future, no need for that now, right?
> 
> Simple is best.

Ok, I can push it all into the C file for v2.

> I'll leave that up to the PCI maintainer, but just a single .c file in a
> subdir seems odd to me.

Thanks,

Logan
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Emil Velikov Jan. 31, 2017, 8:48 p.m. UTC | #7
Hi Logan,

NOTE: Please take my comments with a healthy pinch of salt.

I'd imagine that core/more experienced developers have more thorough
feedback, so I'll mention a few things on the less common part -
robust/compat UABI.
Above all, please read through the in-tree documentation on the topic [1]

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/ioctl/botching-up-ioctls.txt?id=refs/tags/v4.10-rc6

On 31 January 2017 at 17:03, Logan Gunthorpe <logang@deltatee.com> wrote:

> --- /dev/null
> +++ b/include/uapi/linux/switchtec_ioctl.h


> +enum switchtec_ioctl_partition {

> +       SWITCHTEC_IOCTL_NUM_PARTITIONS,
> +};
I'm not sure what the overall consensus on the topic of 'enums vs
defines in UABI'. Fwiw personally I'm in favour of defines since enums
can lead to subtle issues if one is not extra careful. For example:
 - add new enum amidst the list - ABI break
 - add new enum at the end of the list [just before NUM_PARTITIONS] - ABI break.
 - opt for negative value for existing/new enum - ABI break
 - other

With a variable size in mind, carefully consider how you'll copy data
back and forth in the case of new kernel (supports partition[X) + old
userspace (partition [X-1]) and vice-versa. Feel free to look at the
drm ioctl handler and/or others through the kernel.

Hint - as-is we'll end up with buffer overflows/other issues.

> +
> +struct switchtec_ioctl_fw_info {
> +       __u32 flash_length;
> +
> +       struct {
> +               __u32 address;
> +               __u32 length;
> +               __u32 active;
Something to keep in mind, not sure how likely it is here:
If you embed structs (partition in this case), you will not be able to
extend it [the embedded one] it in the future without the risk of ABI
breakage.

> +       } partition[SWITCHTEC_IOCTL_NUM_PARTITIONS];
> +};
> +
Afaict this and most/all other structs [in this patch] are in
violation of Prerequisites#2 and/or #3.
Personally I find pahole quite useful - reference all the UABI structs
in a dummy userspace app, compile with gcc -g -O0 and observe the
output across 32 and 64bit builds. Members _must_ be at the same
offset, otherwise things will be broken with 64bit kernel on a 32bit
userspace. Something which people will eventually end up trying/using,
even if you don't plan to support it.

Please check that Basics (#2 and #5 in particular) are also covered.

A couple more generic suggestions, which I may have noticed while
skimming through:
 - please ensure that all the input is properly sanitised, before,
going into the actual implementation
Afaict having the separate step/separation helps clarity and reduces
chances of you/others getting it wrong down the line.
 - user provided storage must not be changed when the ioctl fails.

Additionally you want to provide a reference to open-source userspace
[alongside acknowledgement of the maintainers/co-developers about the
design] which makes use of said IOCTL(s). But please, do _not_ merge
userspace code before the kernel work has landed.

Hope that provided you with sufficient good points wrt IOCTL design.

Regards,
Emil
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Logan Gunthorpe Jan. 31, 2017, 11:13 p.m. UTC | #8
Hi Emil,

Thanks for the feedback.

On 31/01/17 01:48 PM, Emil Velikov wrote:
>> +struct switchtec_ioctl_fw_info {
>> +       __u32 flash_length;
>> +
>> +       struct {
>> +               __u32 address;
>> +               __u32 length;
>> +               __u32 active;
> Something to keep in mind, not sure how likely it is here:
> If you embed structs (partition in this case), you will not be able to
> extend it [the embedded one] it in the future without the risk of ABI
> breakage.

Based on this feedback, I'll rework the fw_info IOCTL so the user only
requests one partition at a time. This will get rid of the embedded
struct and any concerns about size changes. I was originally trying to
make the ioctl RO to make it simpler but that maybe isn't the case.

>> +       } partition[SWITCHTEC_IOCTL_NUM_PARTITIONS];
>> +};
>> +
> Afaict this and most/all other structs [in this patch] are in
> violation of Prerequisites#2 and/or #3.
> Personally I find pahole quite useful - reference all the UABI structs
> in a dummy userspace app, compile with gcc -g -O0 and observe the
> output across 32 and 64bit builds. Members _must_ be at the same
> offset, otherwise things will be broken with 64bit kernel on a 32bit
> userspace. Something which people will eventually end up trying/using,
> even if you don't plan to support it.

I've made some changes to the padding and sizes to accommodate this.
I'll also do some testing with pahole before v2.


> Please check that Basics (#2 and #5 in particular) are also covered.

> then you need a driver feature flag or revision number somewhere.

We don't have this specifically. A new version ioctl could be added
later when and if changes occur; or the userspace code could easily read
the module version through sysfs and we could increment that with ioctl
changes.

> A couple more generic suggestions, which I may have noticed while
> skimming through:
>  - please ensure that all the input is properly sanitised, before,
> going into the actual implementation
> Afaict having the separate step/separation helps clarity and reduces
> chances of you/others getting it wrong down the line.

The inputs are indeed properly checked in the code. Most of the ioctls
that take inputs are so simple it's hard to separate the two steps. ie.
Verifying that the input is right pretty much gives you the answer you
need to send back to userspace.

>  - user provided storage must not be changed when the ioctl fails.

This should already be true.

> Additionally you want to provide a reference to open-source userspace
> [alongside acknowledgement of the maintainers/co-developers about the
> design] which makes use of said IOCTL(s). But please, do _not_ merge
> userspace code before the kernel work has landed.

I'm having trouble understanding what you're asking here. We provided a
reference to the userspace code in the commit message. Currently the
userspace code is completely useless without the kernel module and it is
entirely independent of other projects. I'm also the only committer so
far on the userspace code. So I assume this only applies if we were
merging changes to other existing code?

> Hope that provided you with sufficient good points wrt IOCTL design.

Thanks, this was very helpful.

Logan
Emil Velikov Feb. 1, 2017, 12:10 p.m. UTC | #9
On 31 January 2017 at 23:13, Logan Gunthorpe <logang@deltatee.com> wrote:
> Hi Emil,
>
> Thanks for the feedback.
>
> On 31/01/17 01:48 PM, Emil Velikov wrote:
>>> +struct switchtec_ioctl_fw_info {
>>> +       __u32 flash_length;
>>> +
>>> +       struct {
>>> +               __u32 address;
>>> +               __u32 length;
>>> +               __u32 active;
>> Something to keep in mind, not sure how likely it is here:
>> If you embed structs (partition in this case), you will not be able to
>> extend it [the embedded one] it in the future without the risk of ABI
>> breakage.
>
> Based on this feedback, I'll rework the fw_info IOCTL so the user only
> requests one partition at a time. This will get rid of the embedded
> struct and any concerns about size changes. I was originally trying to
> make the ioctl RO to make it simpler but that maybe isn't the case.
>
You can keep it roughly as-is if you're ~reasonably certain one won't
change it in the future.

>> then you need a driver feature flag or revision number somewhere.
>
> We don't have this specifically. A new version ioctl could be added
> later when and if changes occur; or the userspace code could easily read
> the module version through sysfs and we could increment that with ioctl
> changes.
>
Some teams frown upon adding new IOCTL(s) where existing ones can be
made backward/forward compatible.
I'm not fully aware of the general direction/consensus on the topic,
so it might be a minority.

On the other hand, reading through sysfs for module version in order
to use IOCTL A or B sounds quite hacky. Do you have an example where
this is used or pointed out as good approach ?

>> A couple more generic suggestions, which I may have noticed while
>> skimming through:
>>  - please ensure that all the input is properly sanitised, before,
>> going into the actual implementation
>> Afaict having the separate step/separation helps clarity and reduces
>> chances of you/others getting it wrong down the line.
>
> The inputs are indeed properly checked in the code. Most of the ioctls
> that take inputs are so simple it's hard to separate the two steps. ie.
> Verifying that the input is right pretty much gives you the answer you
> need to send back to userspace.
>
>>  - user provided storage must not be changed when the ioctl fails.
>
> This should already be true.
>
You're spot on [for both points]. I must have imagined something.

>> Additionally you want to provide a reference to open-source userspace
>> [alongside acknowledgement of the maintainers/co-developers about the
>> design] which makes use of said IOCTL(s). But please, do _not_ merge
>> userspace code before the kernel work has landed.
>
> I'm having trouble understanding what you're asking here. We provided a
> reference to the userspace code in the commit message. Currently the
> userspace code is completely useless without the kernel module and it is
> entirely independent of other projects. I'm also the only committer so
> far on the userspace code. So I assume this only applies if we were
> merging changes to other existing code?
>
Yes, I'm blind - you have links to the userspace.

Afaict the idea is to not ship/bundle/release userspace until kernel
parts are in.
The "do not commit the changes" is implied as [very rarely] distros
package from "random" git checkouts. Leading to all sorts of fun when
it is mismatched wrt the kernel parts. Likelihood of doing that here
is virtually none here, so this is a JFYI inspired by some past
experiences.

>> Hope that provided you with sufficient good points wrt IOCTL design.
>
> Thanks, this was very helpful.
>
Glad to hear. Then again you already had most of the things nicely done, imho.

-Emil
Logan Gunthorpe Feb. 2, 2017, 4:37 p.m. UTC | #10
On 01/02/17 05:10 AM, Emil Velikov wrote:
> You can keep it roughly as-is if you're ~reasonably certain one won't
> change it in the future.

I've made the change anyway. I think it's better now.

> Some teams frown upon adding new IOCTL(s) where existing ones can be
> made backward/forward compatible.
> I'm not fully aware of the general direction/consensus on the topic,
> so it might be a minority.

Sure, I just don't know what might be needed in the future so it's hard
to add a version or flags ioctl now.

> On the other hand, reading through sysfs for module version in order
> to use IOCTL A or B sounds quite hacky. Do you have an example where
> this is used or pointed out as good approach ?

I don't know of anything doing it that way now. But it sure would be
easy and make a bit of sense. (We'd actually use the module version for
something useful.) Either way, it would really depend on if and how
things change in the future. The point is there are options to expand if
needed.


> Afaict the idea is to not ship/bundle/release userspace until kernel
> parts are in.
> The "do not commit the changes" is implied as [very rarely] distros
> package from "random" git checkouts. Leading to all sorts of fun when
> it is mismatched wrt the kernel parts. Likelihood of doing that here
> is virtually none here, so this is a JFYI inspired by some past
> experiences.

Understood.

> Glad to hear. Then again you already had most of the things nicely done, imho.

Great, thanks.

Logan
Emil Velikov Feb. 3, 2017, 1:49 p.m. UTC | #11
On 2 February 2017 at 16:37, Logan Gunthorpe <logang@deltatee.com> wrote:
>
>
> On 01/02/17 05:10 AM, Emil Velikov wrote:
>> You can keep it roughly as-is if you're ~reasonably certain one won't
>> change it in the future.
>
> I've made the change anyway. I think it's better now.
>
>> Some teams frown upon adding new IOCTL(s) where existing ones can be
>> made backward/forward compatible.
>> I'm not fully aware of the general direction/consensus on the topic,
>> so it might be a minority.
>
> Sure, I just don't know what might be needed in the future so it's hard
> to add a version or flags ioctl now.
>
Yes knowing how things will need to change in the is hard. That's why
the documentation suggestions adding a flag to the ioctl structs.
It [the flag] might imply certain functional/implementation change,
support for new/deprecation of old features and others.

>> On the other hand, reading through sysfs for module version in order
>> to use IOCTL A or B sounds quite hacky. Do you have an example where
>> this is used or pointed out as good approach ?
>
> I don't know of anything doing it that way now. But it sure would be
> easy and make a bit of sense. (We'd actually use the module version for
> something useful.) Either way, it would really depend on if and how
> things change in the future. The point is there are options to expand if
> needed.
>
The part that nobody else is doing such a thing should ring a bell ;-)

It's no my call, but if it was I'd stick with the existing approach
and not "reinvent the wheel" sort of speak.

Thanks
Emil
diff mbox

Patch

diff --git a/Documentation/ABI/testing/sysfs-class-switchtec b/Documentation/ABI/testing/sysfs-class-switchtec
new file mode 100644
index 0000000..4fbc417
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-switchtec
@@ -0,0 +1,96 @@ 
+switchtec - Microsemi Switchtec PCI Switch Management Endpoint
+
+For details on this subsystem look at Documentation/switchtec.txt.
+
+What: 		/sys/class/switchtec
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	The switchtec class subsystem folder.
+		Each registered switchtec driver is represented by a switchtecX
+		subfolder (X being an integer >= 0).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component identifier as stored in the hardware (eg. PM4385)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component revision stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/device_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Device version as stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/fw_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Currently running firmware version (read only)
+Values: 	integer (in hexadecimal).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Partition number for this device in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition_count
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Total number of partitions in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product identifier as stored in the hardware (eg. PSX 48XG3)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product revision stored in the hardware (eg. RevB)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 81c7f2b..032b33c 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -191,6 +191,7 @@  Code  Seq#(hex)	Include File		Comments
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!		(pre 3.9)
 'W'	00-3F	sound/asound.h		conflict!
+'W'	40-5F   drivers/pci/switch/switchtec.c
 'X'	all	fs/xfs/xfs_fs.h		conflict!
 		and fs/xfs/linux-2.6/xfs_ioctl32.h
 		and include/linux/falloc.h
diff --git a/Documentation/switchtec.txt b/Documentation/switchtec.txt
new file mode 100644
index 0000000..11a6686
--- /dev/null
+++ b/Documentation/switchtec.txt
@@ -0,0 +1,80 @@ 
+
+Linux Switchtec Support
+========================
+
+Microsemi's "Switchtec" line of PCI switch devices is already
+supported by the kernel with standard PCI switch drivers. However, the
+Switchtec device advertises a special management endpoint which
+enables some additional functionality. This includes:
+
+ * Packet and Byte Counters
+ * Firmware Upgrades
+ * Event and Error logs
+ * Querying port link status
+ * Custom user firmware commands
+
+The switchtec kernel module implements this functionality.
+
+
+Interface
+=========
+
+The primary means of communicating with the Switchtec management firmware is
+through the Memory-mapped Remote Procedure Call (MRPC) interface.
+Commands are submitted to the interface with a 4-byte command
+identifier and up to 1KB of command specific data. The firmware will
+respond with a 4 bytes return code and up to 1KB of command specific
+data. The interface only processes a single command at a time.
+
+
+Userspace Interface
+===================
+
+The MRPC interface will be exposed to userspace through a simple char
+device: /dev/switchtec#, one for each management endpoint in the system.
+
+The char device has the following semantics:
+
+ * A write must consist of at least 4 bytes and no more than 1028 bytes.
+   The first four bytes will be interpreted as the command to run and
+   the remainder will be used as the input data. A write will send the
+   command to the firmware to begin processing.
+
+ * Each write must be followed by exactly one read. Any double write will
+   produce an error and any read that doesn't follow a write will
+   produce an error.
+
+ * A read will block until the firmware completes the command and return
+   the four bytes of status plus up to 1024 bytes of output data. (The
+   length will be specified by the size parameter of the read call --
+   reading less than 4 bytes will produce an error.
+
+ * The poll call will also be supported for userspace applications that
+   need to do other things while waiting for the command to complete.
+
+The following IOCTLs are also supported by the device:
+
+ * SWITCHTEC_IOCTL_FW_INFO - Retrieve firmware address and length for
+   any specified partition. This ioctl populates a
+   switchtec_ioctl_fw_info struct with addresses and lengs for each
+   partition.
+
+ * SWITCHTEC_IOCTL_EVENT_SUMMARY - Read a structure of bitmaps
+   indicating all uncleared events.
+
+ * SWITCHTEC_IOCTL_EVENT_CTL - Get the current count, clear and set flags
+   for any event. This ioctl takes in a switchtec_ioctl_event_ctl struct
+   with the event_id, index and flags set (index being the partition or PFF
+   number for non-global events). It returns whether the event has
+   occurred, the number of times and any event specific data. The flags
+   can be used to clear the count or enable and disable actions to
+   happen when the event occurs.
+
+   By using the SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL flag,
+   you can set an event to trigger a poll command to return with
+   POLLPRI. In this way, userspace can wait for events to occur.
+
+ * SWITCHTEC_IOCTL_PFF_TO_PORT and SWITCHTEC_IOCTL_PORT_TO_PFF convert
+   between PCI Function Framework number (used by the event system)
+   and Switchtec Logic Port ID and Partition number (which is more
+   user friendly).
diff --git a/MAINTAINERS b/MAINTAINERS
index 63cefa6..7efa42c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9288,6 +9288,17 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/pci/aardvark-pci.txt
 F:	drivers/pci/host/pci-aardvark.c
 
+PCI DRIVER FOR MICROSEMI SWITCHTEC
+M:	Kurt Schwemmer <kurt.schwemmer@microsemi.com>
+M:	Stephen Bates <stephen.bates@microsemi.com>
+M:	Logan Gunthorpe <logang@deltatee.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/switchtec.txt
+F:	Documentation/ABI/testing/sysfs-class-switchtec
+F:	drivers/pci/switch/switchtec*
+F:	include/uapi/linux/switchtec_ioctl.h
+
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-tegra@vger.kernel.org
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 6555eb7..f72e8c5 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -133,3 +133,4 @@  config PCI_HYPERV
 
 source "drivers/pci/hotplug/Kconfig"
 source "drivers/pci/host/Kconfig"
+source "drivers/pci/switch/Kconfig"
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 8db5079..15b46dd 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -68,3 +68,4 @@  ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
 
 # PCI host controller drivers
 obj-y += host/
+obj-y += switch/
diff --git a/drivers/pci/switch/Kconfig b/drivers/pci/switch/Kconfig
new file mode 100644
index 0000000..4c49648
--- /dev/null
+++ b/drivers/pci/switch/Kconfig
@@ -0,0 +1,13 @@ 
+menu "PCI switch controller drivers"
+	depends on PCI
+
+config PCI_SW_SWITCHTEC
+	tristate "MicroSemi Switchtec PCIe Switch Management Driver"
+	help
+	 Enables support for the management interface for the MicroSemi
+	 Switchtec series of PCIe switches. Supports userspace access
+	 to submit MRPC commands to the switch via /dev/switchtecX
+	 devices. See <file:Documentation/switchtec.txt> for more
+	 information.
+
+endmenu
diff --git a/drivers/pci/switch/Makefile b/drivers/pci/switch/Makefile
new file mode 100644
index 0000000..37d8cfb
--- /dev/null
+++ b/drivers/pci/switch/Makefile
@@ -0,0 +1 @@ 
+obj-$(CONFIG_PCI_SW_SWITCHTEC) += switchtec.o
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
new file mode 100644
index 0000000..7308fb4
--- /dev/null
+++ b/drivers/pci/switch/switchtec.c
@@ -0,0 +1,1320 @@ 
+/*
+ * Microsemi Switchtec(tm) PCIe Management Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include "switchtec.h"
+#include <linux/switchtec_ioctl.h>
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/poll.h>
+
+MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCI-E Management Driver");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Microsemi Corporation");
+
+static int max_devices = 16;
+module_param(max_devices, int, 0644);
+MODULE_PARM_DESC(max_devices, "max number of switchtec device instances");
+
+static dev_t switchtec_devt;
+static struct class *switchtec_class;
+static DEFINE_IDA(switchtec_minor_ida);
+
+static struct switchtec_dev *to_stdev(struct device *dev)
+{
+	return container_of(dev, struct switchtec_dev, dev);
+}
+
+struct switchtec_user {
+	struct switchtec_dev *stdev;
+
+	enum mrpc_state {
+		MRPC_IDLE = 0,
+		MRPC_QUEUED,
+		MRPC_RUNNING,
+		MRPC_DONE,
+	} state;
+
+	struct completion comp;
+	struct kref kref;
+	struct list_head list;
+
+	u32 cmd;
+	u32 status;
+	u32 return_code;
+	size_t data_len;
+	unsigned char data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	int event_cnt;
+};
+
+static struct switchtec_user *stuser_create(struct switchtec_dev *stdev)
+{
+	struct switchtec_user *stuser;
+
+	stuser = kzalloc(sizeof(*stuser), GFP_KERNEL);
+	if (!stuser)
+		return ERR_PTR(-ENOMEM);
+
+	get_device(&stdev->dev);
+	stuser->stdev = stdev;
+	kref_init(&stuser->kref);
+	INIT_LIST_HEAD(&stuser->list);
+	init_completion(&stuser->comp);
+	stuser->event_cnt = atomic_read(&stdev->event_cnt);
+
+	dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
+
+	return stuser;
+}
+
+static void stuser_free(struct kref *kref)
+{
+	struct switchtec_user *stuser;
+
+	stuser = container_of(kref, struct switchtec_user, kref);
+
+	dev_dbg(&stuser->stdev->dev, "%s: %p\n", __func__, stuser);
+
+	put_device(&stuser->stdev->dev);
+	kfree(stuser);
+}
+
+static void stuser_put(struct switchtec_user *stuser)
+{
+	kref_put(&stuser->kref, stuser_free);
+}
+
+static void stuser_set_state(struct switchtec_user *stuser,
+			     enum mrpc_state state)
+{
+	const char * const state_names[] = {
+		[MRPC_IDLE] = "IDLE",
+		[MRPC_QUEUED] = "QUEUED",
+		[MRPC_RUNNING] = "RUNNING",
+		[MRPC_DONE] = "DONE",
+	};
+
+	stuser->state = state;
+
+	dev_dbg(&stuser->stdev->dev, "stuser state %p -> %s",
+		stuser, state_names[state]);
+}
+
+static int stdev_is_alive(struct switchtec_dev *stdev)
+{
+	return stdev->mmio;
+}
+
+static void mrpc_complete_cmd(struct switchtec_dev *stdev);
+
+static void mrpc_cmd_submit(struct switchtec_dev *stdev)
+{
+	/* requires the mrpc_mutex to already be held when called */
+
+	struct switchtec_user *stuser;
+
+	if (stdev->mrpc_busy)
+		return;
+
+	if (list_empty(&stdev->mrpc_queue))
+		return;
+
+	stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
+			    list);
+
+	stuser_set_state(stuser, MRPC_RUNNING);
+	stdev->mrpc_busy = 1;
+	memcpy_toio(&stdev->mmio_mrpc->input_data,
+		    stuser->data, stuser->data_len);
+	iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd);
+
+	stuser->status = ioread32(&stdev->mmio_mrpc->status);
+	if (stuser->status != SWITCHTEC_MRPC_STATUS_INPROGRESS)
+		mrpc_complete_cmd(stdev);
+
+	schedule_delayed_work(&stdev->mrpc_timeout,
+			      msecs_to_jiffies(500));
+}
+
+static void mrpc_queue_cmd(struct switchtec_user *stuser)
+{
+	/* requires the mrpc_mutex to already be held when called */
+
+	struct switchtec_dev *stdev = stuser->stdev;
+
+	kref_get(&stuser->kref);
+	stuser_set_state(stuser, MRPC_QUEUED);
+	init_completion(&stuser->comp);
+	list_add_tail(&stuser->list, &stdev->mrpc_queue);
+
+	mrpc_cmd_submit(stdev);
+}
+
+static void mrpc_complete_cmd(struct switchtec_dev *stdev)
+{
+	/* requires the mrpc_mutex to already be held when called */
+	struct switchtec_user *stuser;
+
+	if (list_empty(&stdev->mrpc_queue))
+		return;
+
+	stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
+			    list);
+
+	stuser->status = ioread32(&stdev->mmio_mrpc->status);
+	if (stuser->status == SWITCHTEC_MRPC_STATUS_INPROGRESS)
+		return;
+
+	stuser_set_state(stuser, MRPC_DONE);
+	stuser->return_code = 0;
+
+	if (stuser->status != SWITCHTEC_MRPC_STATUS_DONE)
+		goto out;
+
+	stuser->return_code = ioread32(&stdev->mmio_mrpc->ret_value);
+	if (stuser->return_code != 0)
+		goto out;
+
+	memcpy_fromio(stuser->data, &stdev->mmio_mrpc->output_data,
+		      sizeof(stuser->data));
+
+out:
+	complete_all(&stuser->comp);
+	list_del_init(&stuser->list);
+	stuser_put(stuser);
+	stdev->mrpc_busy = 0;
+
+	mrpc_cmd_submit(stdev);
+}
+
+static void mrpc_event_work(struct work_struct *work)
+{
+	struct switchtec_dev *stdev;
+
+	stdev = container_of(work, struct switchtec_dev, mrpc_work);
+
+	dev_dbg(&stdev->dev, "%s\n", __func__);
+
+	mutex_lock(&stdev->mrpc_mutex);
+	cancel_delayed_work(&stdev->mrpc_timeout);
+	mrpc_complete_cmd(stdev);
+	mutex_unlock(&stdev->mrpc_mutex);
+}
+
+static void mrpc_timeout_work(struct work_struct *work)
+{
+	struct switchtec_dev *stdev;
+	u32 status;
+
+	stdev = container_of(work, struct switchtec_dev, mrpc_timeout.work);
+
+	dev_dbg(&stdev->dev, "%s\n", __func__);
+
+	mutex_lock(&stdev->mrpc_mutex);
+
+	if (stdev_is_alive(stdev)) {
+		status = ioread32(&stdev->mmio_mrpc->status);
+		if (status == SWITCHTEC_MRPC_STATUS_INPROGRESS) {
+			schedule_delayed_work(&stdev->mrpc_timeout,
+					      msecs_to_jiffies(500));
+			goto out;
+		}
+	}
+
+	mrpc_complete_cmd(stdev);
+
+out:
+	mutex_unlock(&stdev->mrpc_mutex);
+}
+
+static ssize_t device_version_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	u32 ver;
+
+	ver = ioread32(&stdev->mmio_sys_info->device_version);
+
+	return sprintf(buf, "%x\n", ver);
+}
+static DEVICE_ATTR_RO(device_version);
+
+static ssize_t fw_version_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	u32 ver;
+
+	ver = ioread32(&stdev->mmio_sys_info->firmware_version);
+
+	return sprintf(buf, "%08x\n", ver);
+}
+static DEVICE_ATTR_RO(fw_version);
+
+static ssize_t io_string_show(char *buf, void __iomem *attr, size_t len)
+{
+	int i;
+
+	memcpy_fromio(buf, attr, len);
+	buf[len] = '\n';
+	buf[len + 1] = 0;
+
+	for (i = len - 1; i > 0; i--) {
+		if (buf[i] != ' ')
+			break;
+		buf[i] = '\n';
+		buf[i + 1] = 0;
+	}
+
+	return strlen(buf);
+}
+
+#define DEVICE_ATTR_SYS_INFO_STR(field) \
+static ssize_t field ## _show(struct device *dev, \
+	struct device_attribute *attr, char *buf) \
+{ \
+	struct switchtec_dev *stdev = to_stdev(dev); \
+	return io_string_show(buf, &stdev->mmio_sys_info->field, \
+			    sizeof(stdev->mmio_sys_info->field)); \
+} \
+\
+static DEVICE_ATTR_RO(field)
+
+DEVICE_ATTR_SYS_INFO_STR(vendor_id);
+DEVICE_ATTR_SYS_INFO_STR(product_id);
+DEVICE_ATTR_SYS_INFO_STR(product_revision);
+DEVICE_ATTR_SYS_INFO_STR(component_vendor);
+
+static ssize_t component_id_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	int id = ioread16(&stdev->mmio_sys_info->component_id);
+
+	return sprintf(buf, "PM%04X\n", id);
+}
+static DEVICE_ATTR_RO(component_id);
+
+static ssize_t component_revision_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	int rev = ioread8(&stdev->mmio_sys_info->component_revision);
+
+	return sprintf(buf, "%d\n", rev);
+}
+static DEVICE_ATTR_RO(component_revision);
+
+static ssize_t partition_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+
+	return sprintf(buf, "%d\n", stdev->partition);
+}
+static DEVICE_ATTR_RO(partition);
+
+static ssize_t partition_count_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+
+	return sprintf(buf, "%d\n", stdev->partition_count);
+}
+static DEVICE_ATTR_RO(partition_count);
+
+static struct attribute *switchtec_device_attrs[] = {
+	&dev_attr_device_version.attr,
+	&dev_attr_fw_version.attr,
+	&dev_attr_vendor_id.attr,
+	&dev_attr_product_id.attr,
+	&dev_attr_product_revision.attr,
+	&dev_attr_component_vendor.attr,
+	&dev_attr_component_id.attr,
+	&dev_attr_component_revision.attr,
+	&dev_attr_partition.attr,
+	&dev_attr_partition_count.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(switchtec_device);
+
+static int switchtec_dev_open(struct inode *inode, struct file *filp)
+{
+	struct switchtec_dev *stdev;
+	struct switchtec_user *stuser;
+
+	stdev = container_of(inode->i_cdev, struct switchtec_dev, cdev);
+
+	stuser = stuser_create(stdev);
+	if (!stuser)
+		return PTR_ERR(stuser);
+
+	filp->private_data = stuser;
+	nonseekable_open(inode, filp);
+
+	dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
+
+	return 0;
+}
+
+static int switchtec_dev_release(struct inode *inode, struct file *filp)
+{
+	struct switchtec_user *stuser = filp->private_data;
+
+	stuser_put(stuser);
+
+	return 0;
+}
+
+static ssize_t switchtec_dev_write(struct file *filp, const char __user *data,
+				   size_t size, loff_t *off)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+	int rc;
+
+	if (!stdev_is_alive(stdev))
+		return -ENXIO;
+
+	if (size < sizeof(stuser->cmd) ||
+	    size > sizeof(stuser->cmd) + SWITCHTEC_MRPC_PAYLOAD_SIZE)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&stdev->mrpc_mutex))
+		return -EINTR;
+
+	if (stuser->state != MRPC_IDLE) {
+		rc = -EBADE;
+		goto out;
+	}
+
+	rc = copy_from_user(&stuser->cmd, data, sizeof(stuser->cmd));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	data += sizeof(stuser->cmd);
+	rc = copy_from_user(&stuser->data, data, size - sizeof(stuser->cmd));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	stuser->data_len = size - sizeof(stuser->cmd);
+
+	mrpc_queue_cmd(stuser);
+
+	rc = size;
+
+out:
+	mutex_unlock(&stdev->mrpc_mutex);
+
+	return rc;
+}
+
+static ssize_t switchtec_dev_read(struct file *filp, char __user *data,
+				  size_t size, loff_t *off)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+	int rc;
+
+	if (!stdev_is_alive(stdev))
+		return -ENXIO;
+
+	if (size < sizeof(stuser->cmd) ||
+	    size > sizeof(stuser->cmd) + SWITCHTEC_MRPC_PAYLOAD_SIZE)
+		return -EINVAL;
+
+	if (stuser->state == MRPC_IDLE)
+		return -EBADE;
+
+	if (filp->f_flags & O_NONBLOCK) {
+		if (!try_wait_for_completion(&stuser->comp))
+			return -EAGAIN;
+	} else {
+		rc = wait_for_completion_interruptible(&stuser->comp);
+		if (rc < 0)
+			return rc;
+	}
+
+	if (mutex_lock_interruptible(&stdev->mrpc_mutex))
+		return -EINTR;
+
+	if (stuser->state != MRPC_DONE)
+		return -EBADE;
+
+	rc = copy_to_user(data, &stuser->return_code,
+			  sizeof(stuser->return_code));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	data += sizeof(stuser->return_code);
+	rc = copy_to_user(data, &stuser->data,
+			  size - sizeof(stuser->return_code));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	stuser_set_state(stuser, MRPC_IDLE);
+
+	if (stuser->status == SWITCHTEC_MRPC_STATUS_DONE)
+		rc = size;
+	else if (stuser->status == SWITCHTEC_MRPC_STATUS_INTERRUPTED)
+		rc = -ENXIO;
+	else
+		rc = -EBADMSG;
+
+out:
+	mutex_unlock(&stdev->mrpc_mutex);
+
+	return rc;
+}
+
+static unsigned int switchtec_dev_poll(struct file *filp, poll_table *wait)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+	int ret = 0;
+
+	poll_wait(filp, &stuser->comp.wait, wait);
+	poll_wait(filp, &stdev->event_wq, wait);
+
+	if (!stdev_is_alive(stdev))
+		return POLLERR;
+
+	if (try_wait_for_completion(&stuser->comp))
+		ret |= POLLIN | POLLRDNORM;
+
+	if (stuser->event_cnt != atomic_read(&stdev->event_cnt))
+		ret |= POLLPRI | POLLRDBAND;
+
+	return ret;
+}
+
+static void set_fw_info_part(struct switchtec_ioctl_fw_info *info,
+			     enum switchtec_ioctl_partition p,
+			     struct partition_info __iomem *pi)
+{
+	info->partition[p].address = ioread32(&pi->address);
+	info->partition[p].length = ioread32(&pi->length);
+}
+
+static int ioctl_fw_info(struct switchtec_dev *stdev,
+			 struct switchtec_ioctl_fw_info __user *uinfo)
+{
+	struct switchtec_ioctl_fw_info info = {0};
+	struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
+	u32 active_addr;
+
+	info.flash_length = ioread32(&fi->flash_length);
+
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_CFG0, &fi->cfg0);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_CFG1, &fi->cfg1);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_IMG0, &fi->img0);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_IMG1, &fi->img1);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_NVLOG, &fi->nvlog);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR0, &fi->vendor[0]);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR1, &fi->vendor[1]);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR2, &fi->vendor[2]);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR3, &fi->vendor[3]);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR4, &fi->vendor[4]);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR5, &fi->vendor[5]);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR6, &fi->vendor[6]);
+	set_fw_info_part(&info, SWITCHTEC_IOCTL_PART_VENDOR7, &fi->vendor[7]);
+
+	active_addr = ioread32(&fi->active_img);
+	if (info.partition[SWITCHTEC_IOCTL_PART_IMG0].address == active_addr)
+		info.partition[SWITCHTEC_IOCTL_PART_IMG0].active = 1;
+	if (info.partition[SWITCHTEC_IOCTL_PART_IMG1].address == active_addr)
+		info.partition[SWITCHTEC_IOCTL_PART_IMG1].active = 1;
+
+	active_addr = ioread32(&fi->active_cfg);
+	if (info.partition[SWITCHTEC_IOCTL_PART_CFG0].address == active_addr)
+		info.partition[SWITCHTEC_IOCTL_PART_CFG0].active = 1;
+	if (info.partition[SWITCHTEC_IOCTL_PART_CFG1].address == active_addr)
+		info.partition[SWITCHTEC_IOCTL_PART_CFG1].active = 1;
+
+	if (copy_to_user(uinfo, &info, sizeof(info)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ioctl_event_summary(struct switchtec_dev *stdev,
+	struct switchtec_user *stuser,
+	struct switchtec_ioctl_event_summary __user *usum)
+{
+	struct switchtec_ioctl_event_summary s = {0};
+	int i;
+	u32 reg;
+
+	s.global = ioread32(&stdev->mmio_sw_event->global_summary);
+	s.part_bitmap = ioread32(&stdev->mmio_sw_event->
+				 part_event_bitmap);
+	s.local_part = ioread32(&stdev->mmio_part_cfg->
+				part_event_summary);
+
+	for (i = 0; i < stdev->partition_count; i++) {
+		reg = ioread32(&stdev->mmio_part_cfg_all[i].
+			       part_event_summary);
+		s.part[i] = reg;
+	}
+
+	for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
+		reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
+		if (reg != MICROSEMI_VENDOR_ID)
+			break;
+
+		reg = ioread32(&stdev->mmio_pff_csr[i].pff_event_summary);
+		s.pff[i] = reg;
+	}
+
+	if (copy_to_user(usum, &s, sizeof(s)))
+		return -EFAULT;
+
+	stuser->event_cnt = atomic_read(&stdev->event_cnt);
+
+	return 0;
+}
+
+static u32 __iomem *global_ev_reg(struct switchtec_dev *stdev,
+				  size_t offset, int index)
+{
+	return (void __iomem *)stdev->mmio_sw_event + offset;
+}
+
+static u32 __iomem *part_ev_reg(struct switchtec_dev *stdev,
+				size_t offset, int index)
+{
+	return (void __iomem *)&stdev->mmio_part_cfg_all[index] + offset;
+}
+
+static u32 __iomem *pff_ev_reg(struct switchtec_dev *stdev,
+			       size_t offset, int index)
+{
+	return (void __iomem *)&stdev->mmio_pff_csr[index] + offset;
+}
+
+#define EV_GLB(i, r)[i] = {offsetof(struct sw_event_regs, r), global_ev_reg}
+#define EV_PAR(i, r)[i] = {offsetof(struct part_cfg_regs, r), part_ev_reg}
+#define EV_PFF(i, r)[i] = {offsetof(struct pff_csr_regs, r), pff_ev_reg}
+
+const struct event_reg {
+	size_t offset;
+	u32 __iomem *(*map_reg)(struct switchtec_dev *stdev,
+				size_t offset, int index);
+} event_regs[] = {
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_STACK_ERROR, stack_error_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_PPU_ERROR, ppu_error_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_ISP_ERROR, isp_error_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_SYS_RESET, sys_reset_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_EXC, fw_exception_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NMI, fw_nmi_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NON_FATAL, fw_non_fatal_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_FATAL, fw_fatal_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP, twi_mrpc_comp_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP_ASYNC,
+	       twi_mrpc_comp_async_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP, cli_mrpc_comp_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP_ASYNC,
+	       cli_mrpc_comp_async_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_GPIO_INT, gpio_interrupt_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_PART_RESET, part_reset_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP, mrpc_comp_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP_ASYNC, mrpc_comp_async_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_DYN_PART_BIND_COMP, dyn_binding_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_P2P, aer_in_p2p_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_VEP, aer_in_vep_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_DPC, dpc_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_CTS, cts_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_HOTPLUG, hotplug_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_IER, ier_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_THRESH, threshold_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_POWER_MGMT, power_mgmt_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_TLP_THROTTLING, tlp_throttling_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_FORCE_SPEED, force_speed_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_CREDIT_TIMEOUT, credit_timeout_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_LINK_STATE, link_state_hdr),
+};
+
+static u32 __iomem *event_hdr_addr(struct switchtec_dev *stdev,
+				   int event_id, int index)
+{
+	size_t off;
+
+	if (event_id < 0 || event_id >= SWITCHTEC_IOCTL_MAX_EVENTS)
+		return ERR_PTR(-EINVAL);
+
+	off = event_regs[event_id].offset;
+
+	if (event_regs[event_id].map_reg == part_ev_reg) {
+		if (index == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
+			index = stdev->partition;
+		else if (index < 0 || index >= stdev->partition_count)
+			return ERR_PTR(-EINVAL);
+	} else if (event_regs[event_id].map_reg == pff_ev_reg) {
+		if (index < 0 || index >= stdev->pff_csr_count)
+			return ERR_PTR(-EINVAL);
+	}
+
+	return event_regs[event_id].map_reg(stdev, off, index);
+}
+
+static int event_ctl(struct switchtec_dev *stdev,
+		     struct switchtec_ioctl_event_ctl *ctl)
+{
+	int i;
+	u32 __iomem *reg;
+	u32 hdr;
+
+	reg = event_hdr_addr(stdev, ctl->event_id, ctl->index);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	hdr = ioread32(reg);
+	for (i = 0; i < ARRAY_SIZE(ctl->data); i++)
+		ctl->data[i] = ioread32(&reg[i + 1]);
+
+	ctl->occurred = hdr & SWITCHTEC_EVENT_OCCURRED;
+	ctl->count = (hdr >> 5) & 0xFF;
+
+	if (!(ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_CLEAR))
+		hdr &= ~SWITCHTEC_EVENT_CLEAR;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL)
+		hdr |= SWITCHTEC_EVENT_EN_IRQ;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_POLL)
+		hdr &= ~SWITCHTEC_EVENT_EN_IRQ;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG)
+		hdr |= SWITCHTEC_EVENT_EN_LOG;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_LOG)
+		hdr &= ~SWITCHTEC_EVENT_EN_LOG;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI)
+		hdr |= SWITCHTEC_EVENT_EN_CLI;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_CLI)
+		hdr &= ~SWITCHTEC_EVENT_EN_CLI;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL)
+		hdr |= SWITCHTEC_EVENT_FATAL;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_FATAL)
+		hdr &= ~SWITCHTEC_EVENT_FATAL;
+
+	if (ctl->flags)
+		iowrite32(hdr, reg);
+
+	ctl->flags = 0;
+	if (hdr & SWITCHTEC_EVENT_EN_IRQ)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL;
+	if (hdr & SWITCHTEC_EVENT_EN_LOG)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG;
+	if (hdr & SWITCHTEC_EVENT_EN_CLI)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI;
+	if (hdr & SWITCHTEC_EVENT_FATAL)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL;
+
+	return 0;
+}
+
+static int ioctl_event_ctl(struct switchtec_dev *stdev,
+	struct switchtec_ioctl_event_ctl __user *uctl)
+{
+	int ret;
+	int nr_idxs;
+	struct switchtec_ioctl_event_ctl ctl;
+
+	if (copy_from_user(&ctl, uctl, sizeof(ctl)))
+		return -EFAULT;
+
+	if (ctl.event_id > SWITCHTEC_IOCTL_MAX_EVENTS)
+		return -EINVAL;
+
+	if (ctl.index == SWITCHTEC_IOCTL_EVENT_IDX_ALL) {
+		if (event_regs[ctl.event_id].map_reg == global_ev_reg)
+			nr_idxs = 1;
+		else if (event_regs[ctl.event_id].map_reg == part_ev_reg)
+			nr_idxs = stdev->partition_count;
+		else if (event_regs[ctl.event_id].map_reg == pff_ev_reg)
+			nr_idxs = stdev->pff_csr_count;
+
+		for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
+			ret = event_ctl(stdev, &ctl);
+			if (ret < 0)
+				return ret;
+		}
+	} else {
+		ret = event_ctl(stdev, &ctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (copy_to_user(uctl, &ctl, sizeof(ctl)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ioctl_pff_to_port(struct switchtec_dev *stdev,
+			     struct switchtec_ioctl_pff_port *up)
+{
+	int i, part;
+	u32 reg;
+	struct part_cfg_regs *pcfg;
+	struct switchtec_ioctl_pff_port p;
+
+	if (copy_from_user(&p, up, sizeof(p)))
+		return -EFAULT;
+
+	p.port = -1;
+	for (part = 0; part < stdev->partition_count; part++) {
+		pcfg = &stdev->mmio_part_cfg_all[part];
+		p.partition = part;
+
+		reg = ioread32(&pcfg->usp_pff_inst_id);
+		if (reg == p.pff) {
+			p.port = 0;
+			break;
+		}
+
+		reg = ioread32(&pcfg->vep_pff_inst_id);
+		if (reg == p.pff) {
+			p.port = SWITCHTEC_IOCTL_PFF_VEP;
+			break;
+		}
+
+		for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
+			reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
+			if (reg != p.pff)
+				continue;
+
+			p.port = i + 1;
+			break;
+		}
+
+		if (p.port != -1)
+			break;
+	}
+
+	if (copy_to_user(up, &p, sizeof(p)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ioctl_port_to_pff(struct switchtec_dev *stdev,
+			     struct switchtec_ioctl_pff_port *up)
+{
+	struct switchtec_ioctl_pff_port p;
+	struct part_cfg_regs *pcfg;
+
+	if (copy_from_user(&p, up, sizeof(p)))
+		return -EFAULT;
+
+	if (p.partition == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
+		pcfg = stdev->mmio_part_cfg;
+	else if (p.partition < stdev->partition_count)
+		pcfg = &stdev->mmio_part_cfg_all[p.partition];
+	else
+		return -EINVAL;
+
+	switch (p.port) {
+	case 0:
+		p.pff = ioread32(&pcfg->usp_pff_inst_id);
+		break;
+	case SWITCHTEC_IOCTL_PFF_VEP:
+		p.pff = ioread32(&pcfg->vep_pff_inst_id);
+		break;
+	default:
+		if (p.port > ARRAY_SIZE(pcfg->dsp_pff_inst_id))
+			return -EINVAL;
+		p.pff = ioread32(&pcfg->dsp_pff_inst_id[p.port - 1]);
+		break;
+	}
+
+	if (copy_to_user(up, &p, sizeof(p)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long switchtec_dev_ioctl(struct file *filp, unsigned int cmd,
+				unsigned long arg)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+
+	void __user *argp = (void __user *)arg;
+
+	switch (cmd) {
+	case SWITCHTEC_IOCTL_FW_INFO:
+		return ioctl_fw_info(stdev, argp);
+	case SWITCHTEC_IOCTL_EVENT_SUMMARY:
+		return ioctl_event_summary(stdev, stuser, argp);
+	case SWITCHTEC_IOCTL_EVENT_CTL:
+		return ioctl_event_ctl(stdev, argp);
+	case SWITCHTEC_IOCTL_PFF_TO_PORT:
+		return ioctl_pff_to_port(stdev, argp);
+	case SWITCHTEC_IOCTL_PORT_TO_PFF:
+		return ioctl_port_to_pff(stdev, argp);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations switchtec_fops = {
+	.owner = THIS_MODULE,
+	.open = switchtec_dev_open,
+	.release = switchtec_dev_release,
+	.write = switchtec_dev_write,
+	.read = switchtec_dev_read,
+	.poll = switchtec_dev_poll,
+	.unlocked_ioctl = switchtec_dev_ioctl,
+	.compat_ioctl = switchtec_dev_ioctl,
+};
+
+static void stdev_release(struct device *dev)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+
+	ida_simple_remove(&switchtec_minor_ida,
+			  MINOR(dev->devt));
+	kfree(stdev);
+}
+
+static void stdev_unregister(struct switchtec_dev *stdev)
+{
+	cdev_del(&stdev->cdev);
+	device_unregister(&stdev->dev);
+}
+
+static struct switchtec_dev *stdev_create(struct pci_dev *pdev)
+{
+	struct switchtec_dev *stdev;
+	int minor;
+	struct device *dev;
+	struct cdev *cdev;
+	int rc;
+
+	stdev = kzalloc_node(sizeof(*stdev), GFP_KERNEL,
+			     dev_to_node(&pdev->dev));
+	if (!stdev)
+		return ERR_PTR(-ENOMEM);
+
+	stdev->pdev = pdev;
+	INIT_LIST_HEAD(&stdev->mrpc_queue);
+	mutex_init(&stdev->mrpc_mutex);
+	stdev->mrpc_busy = 0;
+	INIT_WORK(&stdev->mrpc_work, mrpc_event_work);
+	INIT_DELAYED_WORK(&stdev->mrpc_timeout, mrpc_timeout_work);
+	init_waitqueue_head(&stdev->event_wq);
+	atomic_set(&stdev->event_cnt, 0);
+
+	minor = ida_simple_get(&switchtec_minor_ida, 0, 0,
+			       GFP_KERNEL);
+	if (minor < 0)
+		return ERR_PTR(minor);
+
+	dev = &stdev->dev;
+	device_initialize(dev);
+	dev->devt = MKDEV(MAJOR(switchtec_devt), minor);
+	dev->class = switchtec_class;
+	dev->parent = &pdev->dev;
+	dev->groups = switchtec_device_groups;
+	dev->release = stdev_release;
+	dev_set_name(dev, "switchtec%d", minor);
+
+	cdev = &stdev->cdev;
+	cdev_init(cdev, &switchtec_fops);
+	cdev->owner = THIS_MODULE;
+	cdev->kobj.parent = &dev->kobj;
+
+	rc = cdev_add(&stdev->cdev, dev->devt, 1);
+	if (rc)
+		goto err_cdev;
+
+	rc = device_add(dev);
+	if (rc) {
+		cdev_del(&stdev->cdev);
+		put_device(dev);
+		return ERR_PTR(rc);
+	}
+
+	return stdev;
+
+err_cdev:
+	ida_simple_remove(&switchtec_minor_ida, minor);
+
+	return ERR_PTR(rc);
+}
+
+static int mask_event(struct switchtec_dev *stdev, int eid, int idx)
+{
+	size_t off = event_regs[eid].offset;
+	u32 __iomem *hdr_reg;
+	u32 hdr;
+
+	hdr_reg = event_regs[eid].map_reg(stdev, off, idx);
+	hdr = ioread32(hdr_reg);
+
+	if (!(hdr & SWITCHTEC_EVENT_OCCURRED && hdr & SWITCHTEC_EVENT_EN_IRQ))
+		return 0;
+
+	dev_dbg(&stdev->dev, "%s: %d %d %x\n", __func__, eid, idx, hdr);
+	hdr &= ~(SWITCHTEC_EVENT_EN_IRQ | SWITCHTEC_EVENT_OCCURRED);
+	iowrite32(hdr, hdr_reg);
+
+	return 1;
+}
+
+static int mask_all_events(struct switchtec_dev *stdev, int eid)
+{
+	int idx;
+	int count = 0;
+
+	if (event_regs[eid].map_reg == part_ev_reg) {
+		for (idx = 0; idx < stdev->partition_count; idx++)
+			count += mask_event(stdev, eid, idx);
+	} else if (event_regs[eid].map_reg == pff_ev_reg) {
+		for (idx = 0; idx < stdev->pff_csr_count; idx++) {
+			if (!stdev->pff_local[idx])
+				continue;
+			count += mask_event(stdev, eid, idx);
+		}
+	} else {
+		count += mask_event(stdev, eid, 0);
+	}
+
+	return count;
+}
+
+static irqreturn_t switchtec_event_isr(int irq, void *dev)
+{
+	struct switchtec_dev *stdev = dev;
+	u32 reg;
+	irqreturn_t ret = IRQ_NONE;
+	int eid, event_count = 0;
+
+	reg = ioread32(&stdev->mmio_part_cfg->mrpc_comp_hdr);
+	if (reg & SWITCHTEC_EVENT_OCCURRED) {
+		dev_dbg(&stdev->dev, "%s: mrpc comp\n", __func__);
+		ret = IRQ_HANDLED;
+		schedule_work(&stdev->mrpc_work);
+		iowrite32(reg, &stdev->mmio_part_cfg->mrpc_comp_hdr);
+	}
+
+	for (eid = 0; eid < SWITCHTEC_IOCTL_MAX_EVENTS; eid++)
+		event_count += mask_all_events(stdev, eid);
+
+	if (event_count) {
+		atomic_inc(&stdev->event_cnt);
+		wake_up_interruptible(&stdev->event_wq);
+		dev_dbg(&stdev->dev, "%s: %d events\n", __func__,
+			event_count);
+		return IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int switchtec_init_msix_isr(struct switchtec_dev *stdev)
+{
+	struct pci_dev *pdev = stdev->pdev;
+	int rc, i, msix_count, node;
+
+	node = dev_to_node(&pdev->dev);
+
+	for (i = 0; i < ARRAY_SIZE(stdev->msix); ++i)
+		stdev->msix[i].entry = i;
+
+	msix_count = pci_enable_msix_range(pdev, stdev->msix, 1,
+					   ARRAY_SIZE(stdev->msix));
+	if (msix_count < 0)
+		return msix_count;
+
+	stdev->event_irq = ioread32(&stdev->mmio_part_cfg->vep_vector_number);
+	if (stdev->event_irq < 0 || stdev->event_irq >= msix_count) {
+		rc = -EFAULT;
+		goto err_msix_request;
+	}
+
+	stdev->event_irq = stdev->msix[stdev->event_irq].vector;
+	dev_dbg(&stdev->dev, "Using msix interrupts: event_irq=%d\n",
+		stdev->event_irq);
+
+	return 0;
+
+err_msix_request:
+	pci_disable_msix(pdev);
+	return rc;
+}
+
+static int switchtec_init_msi_isr(struct switchtec_dev *stdev)
+{
+	int rc;
+	struct pci_dev *pdev = stdev->pdev;
+
+	/* Try to set up msi irq */
+	rc = pci_enable_msi_range(pdev, 1, 4);
+	if (rc < 0)
+		return rc;
+
+	stdev->event_irq = ioread32(&stdev->mmio_part_cfg->vep_vector_number);
+	if (stdev->event_irq < 0 || stdev->event_irq >= 4) {
+		rc = -EFAULT;
+		goto err_msi_request;
+	}
+
+	stdev->event_irq = pdev->irq + stdev->event_irq;
+	dev_dbg(&stdev->dev, "Using msi interrupts: event_irq=%d\n",
+		stdev->event_irq);
+
+	return 0;
+
+err_msi_request:
+	pci_disable_msi(pdev);
+	return rc;
+}
+
+static int switchtec_init_isr(struct switchtec_dev *stdev)
+{
+	int rc;
+
+	rc = switchtec_init_msix_isr(stdev);
+	if (rc)
+		rc = switchtec_init_msi_isr(stdev);
+
+	if (rc)
+		return rc;
+
+	rc = devm_request_irq(&stdev->pdev->dev, stdev->event_irq,
+			      switchtec_event_isr, 0, KBUILD_MODNAME, stdev);
+
+	return rc;
+}
+
+static void switchtec_deinit_isr(struct switchtec_dev *stdev)
+{
+	devm_free_irq(&stdev->pdev->dev, stdev->event_irq, stdev);
+	pci_disable_msix(stdev->pdev);
+	pci_disable_msi(stdev->pdev);
+}
+
+static void init_pff(struct switchtec_dev *stdev)
+{
+	int i;
+	u32 reg;
+	struct part_cfg_regs *pcfg = stdev->mmio_part_cfg;
+
+	for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
+		reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
+		if (reg != MICROSEMI_VENDOR_ID)
+			break;
+	}
+
+	stdev->pff_csr_count = i;
+
+	reg = ioread32(&pcfg->usp_pff_inst_id);
+	if (reg < SWITCHTEC_MAX_PFF_CSR)
+		stdev->pff_local[reg] = 1;
+
+	reg = ioread32(&pcfg->vep_pff_inst_id);
+	if (reg < SWITCHTEC_MAX_PFF_CSR)
+		stdev->pff_local[reg] = 1;
+
+	for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
+		reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
+		if (reg < SWITCHTEC_MAX_PFF_CSR)
+			stdev->pff_local[reg] = 1;
+	}
+}
+
+static int switchtec_init_pci(struct switchtec_dev *stdev,
+			      struct pci_dev *pdev)
+{
+	int rc;
+	int partition;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	rc = pcim_iomap_regions(pdev, 0x1, KBUILD_MODNAME);
+	if (rc)
+		return rc;
+
+	pci_set_master(pdev);
+
+	stdev->mmio = pcim_iomap_table(pdev)[0];
+	stdev->mmio_mrpc = stdev->mmio + SWITCHTEC_GAS_MRPC_OFFSET;
+	stdev->mmio_sw_event = stdev->mmio + SWITCHTEC_GAS_SW_EVENT_OFFSET;
+	stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
+	stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
+	stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
+	stdev->partition = ioread8(&stdev->mmio_ntb->partition_id);
+	stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
+	stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
+	stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[partition];
+	stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
+
+	init_pff(stdev);
+
+	iowrite32(SWITCHTEC_EVENT_CLEAR |
+		  SWITCHTEC_EVENT_EN_IRQ,
+		  &stdev->mmio_part_cfg->mrpc_comp_hdr);
+
+	pci_set_drvdata(pdev, stdev);
+
+	return 0;
+}
+
+static void switchtec_deinit_pci(struct switchtec_dev *stdev)
+{
+	struct pci_dev *pdev = stdev->pdev;
+
+	stdev->mmio = NULL;
+	pci_clear_master(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static int switchtec_pci_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *id)
+{
+	struct switchtec_dev *stdev;
+	int rc;
+
+	stdev = stdev_create(pdev);
+	if (!stdev)
+		return PTR_ERR(stdev);
+
+	rc = switchtec_init_pci(stdev, pdev);
+	if (rc)
+		goto err_init_pci;
+
+	rc = switchtec_init_isr(stdev);
+	if (rc) {
+		dev_err(&stdev->dev, "failed to init isr.\n");
+		goto err_init_isr;
+	}
+
+	dev_info(&stdev->dev, "Management device registered.\n");
+
+	return 0;
+
+err_init_isr:
+	switchtec_deinit_pci(stdev);
+err_init_pci:
+	stdev_unregister(stdev);
+	return rc;
+}
+
+static void switchtec_pci_remove(struct pci_dev *pdev)
+{
+	struct switchtec_dev *stdev = pci_get_drvdata(pdev);
+
+	switchtec_deinit_isr(stdev);
+	switchtec_deinit_pci(stdev);
+	stdev_unregister(stdev);
+}
+
+#define SWITCHTEC_PCI_DEVICE(device_id) \
+	{ \
+		.vendor     = MICROSEMI_VENDOR_ID, \
+		.device     = device_id, \
+		.subvendor  = PCI_ANY_ID, \
+		.subdevice  = PCI_ANY_ID, \
+		.class      = MICROSEMI_MGMT_CLASSCODE, \
+		.class_mask = 0xFFFFFFFF, \
+	}, \
+	{ \
+		.vendor     = MICROSEMI_VENDOR_ID, \
+		.device     = device_id, \
+		.subvendor  = PCI_ANY_ID, \
+		.subdevice  = PCI_ANY_ID, \
+		.class      = MICROSEMI_NTB_CLASSCODE, \
+		.class_mask = 0xFFFFFFFF, \
+	}
+
+static const struct pci_device_id switchtec_pci_tbl[] = {
+	SWITCHTEC_PCI_DEVICE(0x8531),  //PFX 24xG3
+	SWITCHTEC_PCI_DEVICE(0x8532),  //PFX 32xG3
+	SWITCHTEC_PCI_DEVICE(0x8533),  //PFX 48xG3
+	SWITCHTEC_PCI_DEVICE(0x8534),  //PFX 64xG3
+	SWITCHTEC_PCI_DEVICE(0x8535),  //PFX 80xG3
+	SWITCHTEC_PCI_DEVICE(0x8536),  //PFX 96xG3
+	SWITCHTEC_PCI_DEVICE(0x8543),  //PSX 48xG3
+	SWITCHTEC_PCI_DEVICE(0x8544),  //PSX 64xG3
+	SWITCHTEC_PCI_DEVICE(0x8545),  //PSX 80xG3
+	SWITCHTEC_PCI_DEVICE(0x8546),  //PSX 96xG3
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, switchtec_pci_tbl);
+
+static struct pci_driver switchtec_pci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= switchtec_pci_tbl,
+	.probe		= switchtec_pci_probe,
+	.remove		= switchtec_pci_remove,
+};
+
+static int __init switchtec_init(void)
+{
+	int rc;
+
+	max_devices = max(max_devices, 256);
+	rc = alloc_chrdev_region(&switchtec_devt, 0, max_devices,
+				 "switchtec");
+	if (rc)
+		return rc;
+
+	switchtec_class = class_create(THIS_MODULE, "switchtec");
+	if (IS_ERR(switchtec_class)) {
+		rc = PTR_ERR(switchtec_class);
+		goto err_create_class;
+	}
+
+	rc = pci_register_driver(&switchtec_pci_driver);
+	if (rc)
+		goto err_pci_register;
+
+	pr_info(KBUILD_MODNAME ": loaded.\n");
+
+	return 0;
+
+err_pci_register:
+	class_destroy(switchtec_class);
+
+err_create_class:
+	unregister_chrdev_region(switchtec_devt, max_devices);
+
+	return rc;
+}
+module_init(switchtec_init);
+
+static void __exit switchtec_exit(void)
+{
+	pci_unregister_driver(&switchtec_pci_driver);
+	class_destroy(switchtec_class);
+	unregister_chrdev_region(switchtec_devt, max_devices);
+	ida_destroy(&switchtec_minor_ida);
+
+	pr_info(KBUILD_MODNAME ": unloaded.\n");
+}
+module_exit(switchtec_exit);
diff --git a/drivers/pci/switch/switchtec.h b/drivers/pci/switch/switchtec.h
new file mode 100644
index 0000000..57a2e9f
--- /dev/null
+++ b/drivers/pci/switch/switchtec.h
@@ -0,0 +1,266 @@ 
+/*
+ * Microsemi Switchtec PCIe Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef SWITCHTEC_H
+#define SWITCHTEC_H
+
+#include <linux/pci.h>
+#include <linux/cdev.h>
+#include <linux/wait.h>
+
+#define MICROSEMI_VENDOR_ID         0x11f8
+#define MICROSEMI_NTB_CLASSCODE     0x068000
+#define MICROSEMI_MGMT_CLASSCODE    0x058000
+
+#define SWITCHTEC_MRPC_PAYLOAD_SIZE 1024
+#define SWITCHTEC_MAX_PFF_CSR 48
+
+#define SWITCHTEC_EVENT_OCCURRED BIT(0)
+#define SWITCHTEC_EVENT_CLEAR    BIT(0)
+#define SWITCHTEC_EVENT_EN_LOG   BIT(1)
+#define SWITCHTEC_EVENT_EN_CLI   BIT(2)
+#define SWITCHTEC_EVENT_EN_IRQ   BIT(3)
+#define SWITCHTEC_EVENT_FATAL    BIT(4)
+
+enum {
+	SWITCHTEC_GAS_MRPC_OFFSET       = 0x0000,
+	SWITCHTEC_GAS_TOP_CFG_OFFSET    = 0x1000,
+	SWITCHTEC_GAS_SW_EVENT_OFFSET   = 0x1800,
+	SWITCHTEC_GAS_SYS_INFO_OFFSET   = 0x2000,
+	SWITCHTEC_GAS_FLASH_INFO_OFFSET = 0x2200,
+	SWITCHTEC_GAS_PART_CFG_OFFSET   = 0x4000,
+	SWITCHTEC_GAS_NTB_OFFSET        = 0x10000,
+	SWITCHTEC_GAS_PFF_CSR_OFFSET    = 0x134000,
+};
+
+struct mrpc_regs {
+	u8 input_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	u8 output_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	u32 cmd;
+	u32 status;
+	u32 ret_value;
+} __packed;
+
+enum mrpc_status {
+	SWITCHTEC_MRPC_STATUS_INPROGRESS = 1,
+	SWITCHTEC_MRPC_STATUS_DONE = 2,
+	SWITCHTEC_MRPC_STATUS_ERROR = 0xFF,
+	SWITCHTEC_MRPC_STATUS_INTERRUPTED = 0x100,
+};
+
+struct sw_event_regs {
+	u64 event_report_ctrl;
+	u64 reserved1;
+	u64 part_event_bitmap;
+	u64 reserved2;
+	u32 global_summary;
+	u32 reserved3[3];
+	u32 stack_error_event_hdr;
+	u32 stack_error_event_data;
+	u32 reserved4[4];
+	u32 ppu_error_event_hdr;
+	u32 ppu_error_event_data;
+	u32 reserved5[4];
+	u32 isp_error_event_hdr;
+	u32 isp_error_event_data;
+	u32 reserved6[4];
+	u32 sys_reset_event_hdr;
+	u32 reserved7[5];
+	u32 fw_exception_hdr;
+	u32 reserved8[5];
+	u32 fw_nmi_hdr;
+	u32 reserved9[5];
+	u32 fw_non_fatal_hdr;
+	u32 reserved10[5];
+	u32 fw_fatal_hdr;
+	u32 reserved11[5];
+	u32 twi_mrpc_comp_hdr;
+	u32 twi_mrpc_comp_data;
+	u32 reserved12[4];
+	u32 twi_mrpc_comp_async_hdr;
+	u32 twi_mrpc_comp_async_data;
+	u32 reserved13[4];
+	u32 cli_mrpc_comp_hdr;
+	u32 cli_mrpc_comp_data;
+	u32 reserved14[4];
+	u32 cli_mrpc_comp_async_hdr;
+	u32 cli_mrpc_comp_async_data;
+	u32 reserved15[4];
+	u32 gpio_interrupt_hdr;
+	u32 gpio_interrupt_data;
+	u32 reserved16[4];
+} __packed;
+
+struct sys_info_regs {
+	u32 device_id;
+	u32 device_version;
+	u32 firmware_version;
+	u32 reserved1;
+	u32 vendor_table_revision;
+	u32 table_format_version;
+	u32 partition_id;
+	u32 cfg_file_fmt_version;
+	u32 reserved2[58];
+	char vendor_id[8];
+	char product_id[16];
+	char product_revision[4];
+	char component_vendor[8];
+	u16 component_id;
+	u8 component_revision;
+} __packed;
+
+struct flash_info_regs {
+	u32 flash_part_map_upd_idx;
+
+	struct active_partition_info {
+		u32 address;
+		u32 build_version;
+		u32 build_string;
+	} active_img;
+
+	struct active_partition_info active_cfg;
+	struct active_partition_info inactive_img;
+	struct active_partition_info inactive_cfg;
+
+	u32 flash_length;
+
+	struct partition_info {
+		u32 address;
+		u32 length;
+	} cfg0;
+
+	struct partition_info cfg1;
+	struct partition_info img0;
+	struct partition_info img1;
+	struct partition_info nvlog;
+	struct partition_info vendor[8];
+};
+
+struct ntb_info_regs {
+	u8  partition_count;
+	u8  partition_id;
+	u16 reserved1;
+	u64 ep_map;
+	u16 requester_id;
+} __packed;
+
+struct part_cfg_regs {
+	u32 status;
+	u32 state;
+	u32 port_cnt;
+	u32 usp_port_mode;
+	u32 usp_pff_inst_id;
+	u32 vep_pff_inst_id;
+	u32 dsp_pff_inst_id[47];
+	u32 reserved1[11];
+	u16 vep_vector_number;
+	u16 usp_vector_number;
+	u32 port_event_bitmap;
+	u32 reserved2[3];
+	u32 part_event_summary;
+	u32 reserved3[3];
+	u32 part_reset_hdr;
+	u32 part_reset_data[5];
+	u32 mrpc_comp_hdr;
+	u32 mrpc_comp_data[5];
+	u32 mrpc_comp_async_hdr;
+	u32 mrpc_comp_async_data[5];
+	u32 dyn_binding_hdr;
+	u32 dyn_binding_data[5];
+	u32 reserved4[159];
+} __packed;
+
+enum {
+	SWITCHTEC_PART_CFG_EVENT_RESET = 1 << 0,
+	SWITCHTEC_PART_CFG_EVENT_MRPC_CMP = 1 << 1,
+	SWITCHTEC_PART_CFG_EVENT_MRPC_ASYNC_CMP = 1 << 2,
+	SWITCHTEC_PART_CFG_EVENT_DYN_PART_CMP = 1 << 3,
+};
+
+struct pff_csr_regs {
+	u16 vendor_id;
+	u16 device_id;
+	u32 pci_cfg_header[15];
+	u32 pci_cap_region[48];
+	u32 pcie_cap_region[448];
+	u32 indirect_gas_window[128];
+	u32 indirect_gas_window_off;
+	u32 reserved[127];
+	u32 pff_event_summary;
+	u32 reserved2[3];
+	u32 aer_in_p2p_hdr;
+	u32 aer_in_p2p_data[5];
+	u32 aer_in_vep_hdr;
+	u32 aer_in_vep_data[5];
+	u32 dpc_hdr;
+	u32 dpc_data[5];
+	u32 cts_hdr;
+	u32 cts_data[5];
+	u32 reserved3[6];
+	u32 hotplug_hdr;
+	u32 hotplug_data[5];
+	u32 ier_hdr;
+	u32 ier_data[5];
+	u32 threshold_hdr;
+	u32 threshold_data[5];
+	u32 power_mgmt_hdr;
+	u32 power_mgmt_data[5];
+	u32 tlp_throttling_hdr;
+	u32 tlp_throttling_data[5];
+	u32 force_speed_hdr;
+	u32 force_speed_data[5];
+	u32 credit_timeout_hdr;
+	u32 credit_timeout_data[5];
+	u32 link_state_hdr;
+	u32 link_state_data[5];
+	u32 reserved4[174];
+} __packed;
+
+struct switchtec_dev {
+	struct pci_dev *pdev;
+	struct msix_entry msix[4];
+	struct device dev;
+	struct cdev cdev;
+	unsigned int event_irq;
+
+	int partition;
+	int partition_count;
+	int pff_csr_count;
+	char pff_local[SWITCHTEC_MAX_PFF_CSR];
+
+	void __iomem *mmio;
+	struct mrpc_regs __iomem *mmio_mrpc;
+	struct sw_event_regs __iomem *mmio_sw_event;
+	struct sys_info_regs __iomem *mmio_sys_info;
+	struct flash_info_regs __iomem *mmio_flash_info;
+	struct ntb_info_regs __iomem *mmio_ntb;
+	struct part_cfg_regs __iomem *mmio_part_cfg;
+	struct part_cfg_regs __iomem *mmio_part_cfg_all;
+	struct pff_csr_regs __iomem *mmio_pff_csr;
+
+	/*
+	 * The mrpc mutex must be held when accessing the other
+	 * mrpc fields
+	 */
+	struct mutex mrpc_mutex;
+	struct list_head mrpc_queue;
+	int mrpc_busy;
+	struct work_struct mrpc_work;
+	struct delayed_work mrpc_timeout;
+	wait_queue_head_t event_wq;
+	atomic_t event_cnt;
+};
+
+#endif
diff --git a/include/uapi/linux/switchtec_ioctl.h b/include/uapi/linux/switchtec_ioctl.h
new file mode 100644
index 0000000..9ecbd42
--- /dev/null
+++ b/include/uapi/linux/switchtec_ioctl.h
@@ -0,0 +1,129 @@ 
+/*
+ * Microsemi Switchtec PCIe Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _UAPI_LINUX_SWITCHTEC_IOCTL_H
+#define _UAPI_LINUX_SWITCHTEC_IOCTL_H
+
+#include <linux/types.h>
+
+enum switchtec_ioctl_partition {
+	SWITCHTEC_IOCTL_PART_CFG0,
+	SWITCHTEC_IOCTL_PART_CFG1,
+	SWITCHTEC_IOCTL_PART_IMG0,
+	SWITCHTEC_IOCTL_PART_IMG1,
+	SWITCHTEC_IOCTL_PART_NVLOG,
+	SWITCHTEC_IOCTL_PART_VENDOR0,
+	SWITCHTEC_IOCTL_PART_VENDOR1,
+	SWITCHTEC_IOCTL_PART_VENDOR2,
+	SWITCHTEC_IOCTL_PART_VENDOR3,
+	SWITCHTEC_IOCTL_PART_VENDOR4,
+	SWITCHTEC_IOCTL_PART_VENDOR5,
+	SWITCHTEC_IOCTL_PART_VENDOR6,
+	SWITCHTEC_IOCTL_PART_VENDOR7,
+	SWITCHTEC_IOCTL_NUM_PARTITIONS,
+};
+
+struct switchtec_ioctl_fw_info {
+	__u32 flash_length;
+
+	struct {
+		__u32 address;
+		__u32 length;
+		__u32 active;
+	} partition[SWITCHTEC_IOCTL_NUM_PARTITIONS];
+};
+
+struct switchtec_ioctl_event_summary {
+	__u64 global;
+	__u64 part_bitmap;
+	__u32 local_part;
+	__u32 part[48];
+	__u32 pff[48];
+};
+
+enum switchtec_ioctl_event {
+	SWITCHTEC_IOCTL_EVENT_STACK_ERROR,
+	SWITCHTEC_IOCTL_EVENT_PPU_ERROR,
+	SWITCHTEC_IOCTL_EVENT_ISP_ERROR,
+	SWITCHTEC_IOCTL_EVENT_SYS_RESET,
+	SWITCHTEC_IOCTL_EVENT_FW_EXC,
+	SWITCHTEC_IOCTL_EVENT_FW_NMI,
+	SWITCHTEC_IOCTL_EVENT_FW_NON_FATAL,
+	SWITCHTEC_IOCTL_EVENT_FW_FATAL,
+	SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP,
+	SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP_ASYNC,
+	SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP,
+	SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP_ASYNC,
+	SWITCHTEC_IOCTL_EVENT_GPIO_INT,
+	SWITCHTEC_IOCTL_EVENT_PART_RESET,
+	SWITCHTEC_IOCTL_EVENT_MRPC_COMP,
+	SWITCHTEC_IOCTL_EVENT_MRPC_COMP_ASYNC,
+	SWITCHTEC_IOCTL_EVENT_DYN_PART_BIND_COMP,
+	SWITCHTEC_IOCTL_EVENT_AER_IN_P2P,
+	SWITCHTEC_IOCTL_EVENT_AER_IN_VEP,
+	SWITCHTEC_IOCTL_EVENT_DPC,
+	SWITCHTEC_IOCTL_EVENT_CTS,
+	SWITCHTEC_IOCTL_EVENT_HOTPLUG,
+	SWITCHTEC_IOCTL_EVENT_IER,
+	SWITCHTEC_IOCTL_EVENT_THRESH,
+	SWITCHTEC_IOCTL_EVENT_POWER_MGMT,
+	SWITCHTEC_IOCTL_EVENT_TLP_THROTTLING,
+	SWITCHTEC_IOCTL_EVENT_FORCE_SPEED,
+	SWITCHTEC_IOCTL_EVENT_CREDIT_TIMEOUT,
+	SWITCHTEC_IOCTL_EVENT_LINK_STATE,
+	SWITCHTEC_IOCTL_MAX_EVENTS,
+};
+
+#define SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX -1
+#define SWITCHTEC_IOCTL_EVENT_IDX_ALL -2
+
+#define SWITCHTEC_IOCTL_EVENT_FLAG_CLEAR     (1 << 0)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL   (1 << 1)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG    (1 << 2)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI    (1 << 3)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL  (1 << 4)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_POLL  (1 << 5)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_LOG   (1 << 6)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_CLI   (1 << 7)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_FATAL (1 << 8)
+
+struct switchtec_ioctl_event_ctl {
+	__u32 event_id;
+	__s32 index;
+	__u32 flags;
+	__u16 occurred;
+	__u16 count;
+	__u32 data[5];
+};
+
+#define SWITCHTEC_IOCTL_PFF_VEP 100
+struct switchtec_ioctl_pff_port {
+	__u32 pff;
+	__u32 partition;
+	__u32 port;
+};
+
+#define SWITCHTEC_IOCTL_FW_INFO \
+	_IOR('W', 0x40, struct switchtec_ioctl_fw_info)
+#define SWITCHTEC_IOCTL_EVENT_SUMMARY \
+	_IOR('W', 0x41, struct switchtec_ioctl_event_summary)
+#define SWITCHTEC_IOCTL_EVENT_CTL \
+	_IOWR('W', 0x42, struct switchtec_ioctl_event_ctl)
+#define SWITCHTEC_IOCTL_PFF_TO_PORT \
+	_IOWR('W', 0x43, struct switchtec_ioctl_pff_port)
+#define SWITCHTEC_IOCTL_PORT_TO_PFF \
+	_IOWR('W', 0x44, struct switchtec_ioctl_pff_port)
+
+#endif