diff mbox

thermal: mt8173: minor mtk_thermal.c cleanups

Message ID 1486531862-31945-1-git-send-email-dawei.chien@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dawei Chien Feb. 8, 2017, 5:31 a.m. UTC
Thermal driver should read TEMP_MSR3 if thermal bank with 4 sensors.
However, Currently thermal driver don't need read TEMP_MSR3 since
thermal controller only use 3 sensors for each thermal bank.

Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
 drivers/thermal/mtk_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Matthias Brugger Feb. 9, 2017, 9:25 p.m. UTC | #1
On 02/08/2017 06:31 AM, Dawei Chien wrote:
> Thermal driver should read TEMP_MSR3 if thermal bank with 4 sensors.
> However, Currently thermal driver don't need read TEMP_MSR3 since
> thermal controller only use 3 sensors for each thermal bank.
>
> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> ---

Actually the commit message should state:
Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")

...and get backported to v4.9 and v4.10.

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

Regards,
Matthias

>  drivers/thermal/mtk_thermal.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 34169c3..c124151 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -191,7 +191,7 @@ struct mtk_thermal {
>  };
>
>  const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
> -	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2
> +	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
>  };
>
>  const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
>
Dawei Chien Feb. 13, 2017, 9:01 a.m. UTC | #2
Hi, Matthias,

On Thu, 2017-02-09 at 22:25 +0100, Matthias Brugger wrote:
> 
> On 02/08/2017 06:31 AM, Dawei Chien wrote:
> > Thermal driver should read TEMP_MSR3 if thermal bank with 4 sensors.
> > However, Currently thermal driver don't need read TEMP_MSR3 since
> > thermal controller only use 3 sensors for each thermal bank.
> >
> > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > ---
> 
> Actually the commit message should state:
> Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
> 
> ...and get backported to v4.9 and v4.10.
> 
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> 
> Regards,
> Matthias

Thank you for your review. I would add below commit message on next
version. However, currently 8173 thermal driver would not read TEMP_MSR3
since thermal driver only use 3 sensors on each bank, this patch would
not effect temperature.
Only if thermal driver use 4 sensors on any thermal bank, would read
third sensor two times, and lose fourth sensor of vale.
Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")

> >  drivers/thermal/mtk_thermal.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> > index 34169c3..c124151 100644
> > --- a/drivers/thermal/mtk_thermal.c
> > +++ b/drivers/thermal/mtk_thermal.c
> > @@ -191,7 +191,7 @@ struct mtk_thermal {
> >  };
> >
> >  const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
> > -	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2
> > +	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
> >  };
> >
> >  const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
> >
Eduardo Valentin Feb. 19, 2017, 1:23 a.m. UTC | #3
On Mon, Feb 13, 2017 at 05:01:58PM +0800, Dawei Chien wrote:
> Hi, Matthias,
> 
> On Thu, 2017-02-09 at 22:25 +0100, Matthias Brugger wrote:
> > 
> > On 02/08/2017 06:31 AM, Dawei Chien wrote:
> > > Thermal driver should read TEMP_MSR3 if thermal bank with 4 sensors.
> > > However, Currently thermal driver don't need read TEMP_MSR3 since
> > > thermal controller only use 3 sensors for each thermal bank.
> > >
> > > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > > ---
> > 
> > Actually the commit message should state:
> > Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
> > 
> > ...and get backported to v4.9 and v4.10.
> > 
> > Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> > 
> > Regards,
> > Matthias
> 
> Thank you for your review. I would add below commit message on next
> version. However, currently 8173 thermal driver would not read TEMP_MSR3
> since thermal driver only use 3 sensors on each bank, this patch would
> not effect temperature.
> Only if thermal driver use 4 sensors on any thermal bank, would read
> third sensor two times, and lose fourth sensor of vale.
> Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
> 

Please send a new version with the tag in the commit message.
Matthias Brugger Feb. 20, 2017, 11:30 a.m. UTC | #4
On 19/02/17 02:23, Eduardo Valentin wrote:
> On Mon, Feb 13, 2017 at 05:01:58PM +0800, Dawei Chien wrote:
>> Hi, Matthias,
>>
>> On Thu, 2017-02-09 at 22:25 +0100, Matthias Brugger wrote:
>>>
>>> On 02/08/2017 06:31 AM, Dawei Chien wrote:
>>>> Thermal driver should read TEMP_MSR3 if thermal bank with 4 sensors.
>>>> However, Currently thermal driver don't need read TEMP_MSR3 since
>>>> thermal controller only use 3 sensors for each thermal bank.
>>>>
>>>> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
>>>> ---
>>>
>>> Actually the commit message should state:
>>> Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
>>>
>>> ...and get backported to v4.9 and v4.10.
>>>
>>> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
>>>
>>> Regards,
>>> Matthias
>>
>> Thank you for your review. I would add below commit message on next
>> version. However, currently 8173 thermal driver would not read TEMP_MSR3
>> since thermal driver only use 3 sensors on each bank, this patch would
>> not effect temperature.
>> Only if thermal driver use 4 sensors on any thermal bank, would read
>> third sensor two times, and lose fourth sensor of vale.
>> Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
>>
>
> Please send a new version with the tag in the commit message.
>

And don't forget to add stable@vger.kernel.org so that the fix ends up 
in the older kernels as well.

Regards,
Matthias
diff mbox

Patch

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 34169c3..c124151 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -191,7 +191,7 @@  struct mtk_thermal {
 };
 
 const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
-	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
 };
 
 const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {