diff mbox

PCI: dwc: uninitialized variable in dw_handle_msi_irq()

Message ID 20170217232618.GC26717@mwanda (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Dan Carpenter Feb. 17, 2017, 11:26 p.m. UTC
The bug is that "val" is unsigned long but we only initialize 32 bits
of it.  Then we test "if (val)" and that might be true not because we
set the bits but because some were never initialized.

Fixes: f342d940ee0e ("PCI: exynos: Add support for MSI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Static analysis.  Not tested.

Comments

Walter Harms Feb. 18, 2017, 12:08 p.m. UTC | #1
Am 18.02.2017 00:26, schrieb Dan Carpenter:
> The bug is that "val" is unsigned long but we only initialize 32 bits
> of it.  Then we test "if (val)" and that might be true not because we
> set the bits but because some were never initialized.
> 
> Fixes: f342d940ee0e ("PCI: exynos: Add support for MSI")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> Static analysis.  Not tested.
> 
> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
> index af8f6e92e885..5bfc377b83e4 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -257,17 +257,18 @@ static struct irq_chip dw_msi_irq_chip = {
>  /* MSI int handler */
>  irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
>  {
> -	unsigned long val;
> +	u32 val;
>  	int i, pos, irq;
>  	irqreturn_t ret = IRQ_NONE;
>  
>  	for (i = 0; i < MAX_MSI_CTRLS; i++) {
>  		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
> -				(u32 *)&val);
> +				    &val);
>  		if (val) {

why not
	if (!val) continue;

it would save an entire indent level and make things a bit more easy to read.


>  			ret = IRQ_HANDLED;
>  			pos = 0;
> -			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
> +			while ((pos = find_next_bit((unsigned long *)&val, 32,
> +						    pos)) != 32) {
>  				irq = irq_find_mapping(pp->irq_domain,
>  						i * 32 + pos);

irq seems to be 0 when nothing is found. This can never happen ?

find_next_bit() feels a bit overpowered perhaps a simple loop
would be more effective and more easy to understand ?
something like:
	while ( val) {
	 if (val & 1 )
		found ...
	val>>=1;
	pos++;
	}

just my 2 cents,

re,
 wh


>  				dw_pcie_wr_own_conf(pp,
Bjorn Helgaas Feb. 22, 2017, 8:20 p.m. UTC | #2
On Sat, Feb 18, 2017 at 02:26:18AM +0300, Dan Carpenter wrote:
> The bug is that "val" is unsigned long but we only initialize 32 bits
> of it.  Then we test "if (val)" and that might be true not because we
> set the bits but because some were never initialized.
> 
> Fixes: f342d940ee0e ("PCI: exynos: Add support for MSI")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

Jingoo, Joao?

> ---
> Static analysis.  Not tested.
> 
> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
> index af8f6e92e885..5bfc377b83e4 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -257,17 +257,18 @@ static struct irq_chip dw_msi_irq_chip = {
>  /* MSI int handler */
>  irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
>  {
> -	unsigned long val;
> +	u32 val;
>  	int i, pos, irq;
>  	irqreturn_t ret = IRQ_NONE;
>  
>  	for (i = 0; i < MAX_MSI_CTRLS; i++) {
>  		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
> -				(u32 *)&val);
> +				    &val);
>  		if (val) {
>  			ret = IRQ_HANDLED;
>  			pos = 0;
> -			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
> +			while ((pos = find_next_bit((unsigned long *)&val, 32,
> +						    pos)) != 32) {
>  				irq = irq_find_mapping(pp->irq_domain,
>  						i * 32 + pos);
>  				dw_pcie_wr_own_conf(pp,
Joao Pinto Feb. 22, 2017, 11:08 p.m. UTC | #3
Hi Dan,

Às 3:26 PM de 2/17/2017, Dan Carpenter escreveu:
> The bug is that "val" is unsigned long but we only initialize 32 bits
> of it.  Then we test "if (val)" and that might be true not because we
> set the bits but because some were never initialized.
> 
> Fixes: f342d940ee0e ("PCI: exynos: Add support for MSI")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> Static analysis.  Not tested.

What you are statiting makes perfect sense, since the register is indeed 32 bits
and can have undesirable behavior in 64-bit systems for example.
We have more examples like this for MSI related operations in pcie-designware.
Could you please change them as well just?

For example, the irq variable declaration is also not consistent as you can see
in these examples:

 static void dw_msi_setup_msg(struct pcie_port *pp, unsigned int irq, u32 pos)

 static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
                           irq_hw_number_t hwirq)

 static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)

 static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)

 etc.

Thanks
Joao

> 
> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
> index af8f6e92e885..5bfc377b83e4 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -257,17 +257,18 @@ static struct irq_chip dw_msi_irq_chip = {
>  /* MSI int handler */
>  irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
>  {
> -	unsigned long val;
> +	u32 val;
>  	int i, pos, irq;
>  	irqreturn_t ret = IRQ_NONE;
>  
>  	for (i = 0; i < MAX_MSI_CTRLS; i++) {
>  		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
> -				(u32 *)&val);
> +				    &val);
>  		if (val) {
>  			ret = IRQ_HANDLED;
>  			pos = 0;
> -			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
> +			while ((pos = find_next_bit((unsigned long *)&val, 32,
> +						    pos)) != 32) {
>  				irq = irq_find_mapping(pp->irq_domain,
>  						i * 32 + pos);
>  				dw_pcie_wr_own_conf(pp,
>
Bjorn Helgaas March 7, 2017, 7:09 p.m. UTC | #4
On Wed, Feb 22, 2017 at 03:08:07PM -0800, Joao Pinto wrote:
> Hi Dan,
> 
> Às 3:26 PM de 2/17/2017, Dan Carpenter escreveu:
> > The bug is that "val" is unsigned long but we only initialize 32 bits
> > of it.  Then we test "if (val)" and that might be true not because we
> > set the bits but because some were never initialized.
> > 
> > Fixes: f342d940ee0e ("PCI: exynos: Add support for MSI")
> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > ---
> > Static analysis.  Not tested.
> 
> What you are statiting makes perfect sense, since the register is indeed 32 bits
> and can have undesirable behavior in 64-bit systems for example.
> We have more examples like this for MSI related operations in pcie-designware.
> Could you please change them as well just?
> 
> For example, the irq variable declaration is also not consistent as you can see
> in these examples:
> 
>  static void dw_msi_setup_msg(struct pcie_port *pp, unsigned int irq, u32 pos)
> 
>  static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
>                            irq_hw_number_t hwirq)
> 
>  static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
> 
>  static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)

Where are we with this?  It sounds like there's a real problem here,
and Dan's original patch fixes one case of it.  But if there are other
similar cases, we should fix them all at once.

Since this doesn't sound like an urgent bug fix (I don't see user
problem reports), I guess I'll wait for an updated patch?

> > diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
> > index af8f6e92e885..5bfc377b83e4 100644
> > --- a/drivers/pci/dwc/pcie-designware.c
> > +++ b/drivers/pci/dwc/pcie-designware.c
> > @@ -257,17 +257,18 @@ static struct irq_chip dw_msi_irq_chip = {
> >  /* MSI int handler */
> >  irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
> >  {
> > -	unsigned long val;
> > +	u32 val;
> >  	int i, pos, irq;
> >  	irqreturn_t ret = IRQ_NONE;
> >  
> >  	for (i = 0; i < MAX_MSI_CTRLS; i++) {
> >  		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
> > -				(u32 *)&val);
> > +				    &val);
> >  		if (val) {
> >  			ret = IRQ_HANDLED;
> >  			pos = 0;
> > -			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
> > +			while ((pos = find_next_bit((unsigned long *)&val, 32,
> > +						    pos)) != 32) {
> >  				irq = irq_find_mapping(pp->irq_domain,
> >  						i * 32 + pos);
> >  				dw_pcie_wr_own_conf(pp,
> > 
>
Dan Carpenter March 7, 2017, 7:32 p.m. UTC | #5
On Tue, Mar 07, 2017 at 01:09:55PM -0600, Bjorn Helgaas wrote:
> On Wed, Feb 22, 2017 at 03:08:07PM -0800, Joao Pinto wrote:
> > Hi Dan,
> > 
> > Às 3:26 PM de 2/17/2017, Dan Carpenter escreveu:
> > > The bug is that "val" is unsigned long but we only initialize 32 bits
> > > of it.  Then we test "if (val)" and that might be true not because we
> > > set the bits but because some were never initialized.
> > > 
> > > Fixes: f342d940ee0e ("PCI: exynos: Add support for MSI")
> > > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > > ---
> > > Static analysis.  Not tested.
> > 
> > What you are statiting makes perfect sense, since the register is indeed 32 bits
> > and can have undesirable behavior in 64-bit systems for example.
> > We have more examples like this for MSI related operations in pcie-designware.
> > Could you please change them as well just?
> > 
> > For example, the irq variable declaration is also not consistent as you can see
> > in these examples:
> > 
> >  static void dw_msi_setup_msg(struct pcie_port *pp, unsigned int irq, u32 pos)
> > 
> >  static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
> >                            irq_hw_number_t hwirq)
> > 
> >  static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
> > 
> >  static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
> 
> Where are we with this?  It sounds like there's a real problem here,
> and Dan's original patch fixes one case of it.  But if there are other
> similar cases, we should fix them all at once.
> 
> Since this doesn't sound like an urgent bug fix (I don't see user
> problem reports), I guess I'll wait for an updated patch?

Oh...  Hm.  I misread.  I thought that Joao was going to send a patch.

Looking at it more closely now, I think my patch is sufficient.  Perhaps
I have misunderstood something but I don't see any other bugs here
beyond the one I fixed.

regards,
dan carpenter
diff mbox

Patch

diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index af8f6e92e885..5bfc377b83e4 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -257,17 +257,18 @@  static struct irq_chip dw_msi_irq_chip = {
 /* MSI int handler */
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {
-	unsigned long val;
+	u32 val;
 	int i, pos, irq;
 	irqreturn_t ret = IRQ_NONE;
 
 	for (i = 0; i < MAX_MSI_CTRLS; i++) {
 		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
-				(u32 *)&val);
+				    &val);
 		if (val) {
 			ret = IRQ_HANDLED;
 			pos = 0;
-			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
+			while ((pos = find_next_bit((unsigned long *)&val, 32,
+						    pos)) != 32) {
 				irq = irq_find_mapping(pp->irq_domain,
 						i * 32 + pos);
 				dw_pcie_wr_own_conf(pp,