diff mbox

[RESEND,v2,1/2] ASoC: stm32: add bindings for SAI

Message ID 1488879872-7839-2-git-send-email-olivier.moysan@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Olivier MOYSAN March 7, 2017, 9:44 a.m. UTC
This patch adds documentation of device tree bindings for the
STM32 SAI ASoC driver.

Signed-off-by: olivier moysan <olivier.moysan@st.com>
---
 .../devicetree/bindings/sound/st,stm32-sai.txt     | 79 ++++++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt

Comments

Rob Herring March 15, 2017, 5:46 p.m. UTC | #1
On Tue, Mar 07, 2017 at 10:44:31AM +0100, olivier moysan wrote:
> This patch adds documentation of device tree bindings for the
> STM32 SAI ASoC driver.
> 
> Signed-off-by: olivier moysan <olivier.moysan@st.com>
> ---
>  .../devicetree/bindings/sound/st,stm32-sai.txt     | 79 ++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> new file mode 100644
> index 0000000..b3be26d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> @@ -0,0 +1,79 @@
> +STMicroelectronics STM32 Serial Audio Interface (SAI).
> +
> +The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
> +as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
> +The SAI contains two independent audio sub-blocks. Each sub-block has
> +its own clock generator and I/O lines controller.
> +
> +Required properties:
> +  - compatible: Should be "st,stm32f4-sai"
> +  - reg: Base address and size of SAI common register set.
> +  - clocks: Must contain phandle and clock specifier pairs for each entry
> +	in clock-names.
> +  - clock-names: Must contain "clk_x8k" and "clk_x11k"
> +	"clk_x8k": SAI parent clock for sampling rates multiple of 8kHz.
> +	"clk_x11k": SAI parent clock for sampling rates multiple of 11.025kHz.

clk_ is redundant.

> +  - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
> +
> +Note: Each SAI controller should have an alias correctly numbered
> +in "aliases" node, to provide explicit name to CPU DAI.

No, it shouldn't. Why do you need that?


> +
> +Optional properties:
> +  - resets: Reference to a reset controller asserting the SAI
> +
> +SAI subnodes:
> +Two subnodes corresponding to SAI sub-block instances A et B can be defined.
> +Subnode can be omitted for unsused sub-block.
> +
> +SAI subnodes required properties:
> +  - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
> +	for SAI sub-block A or B respectively.
> +  - reg: Base address and size of SAI sub-block register set.
> +  - clocks: Must contain one phandle and clock specifier pair
> +	for sai_ck which feeds the internal clock generator.
> +  - clock-names: Must contain "sai_ck".
> +  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
> +  - dma-names: identifier string for each DMA request line
> +	"tx": if sai sub-block is configured as playback DAI
> +	"rx": if sai sub-block is configured as capture DAI
> +  - pinctrl-names: should contain only value "default"
> +  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
> +
> +Example:
> +sai1: sai1@40015800 {
> +	compatible = "st,stm32f4-sai";
> +	reg = <0x40015800 0x400>;
> +	clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
> +	clock-names = "clk_x8k", "clk_x11k";
> +	interrupts = <87>;
> +	resets = <&rcc 310>;
> +
> +	sai1b: sai@1 {

unit address needs a reg property.

audio-controller@1

> +		#sound-dai-cells = <0>;
> +		compatible = "st,stm32-sai-sub-b";
> +		clocks = <&rcc 1 CLK_SAI2>;
> +		clock-names = "sai_ck";
> +		dmas = <&dma2 5 0 0x400 0x1>;
> +		dma-names = "tx";
> +	};
> +};
> +
> +sound {
> +	compatible = "simple-audio-card";

Perhaps you want to use the graph-card here. It's getting close to 
merging.

> +	simple-audio-card,name = "STM32-Sound-Card";
> +	status = "okay";
> +
> +	simple-audio-card,dai-link@0 {
> +		format = "i2s";
> +		cpu {
> +			sound-dai = <&sai1b>;
> +		};
> +		codec {
> +			sound-dai = <&codec>;
> +		};
> +	};
> +};
> +
> +aliases {
> +	sai1 = &sai1;
> +};
> -- 
> 1.9.1
>
Olivier MOYSAN March 16, 2017, 10:50 a.m. UTC | #2
Hello Rob,

Thanks for your feedback.

On 03/15/2017 06:46 PM, Rob Herring wrote:
> On Tue, Mar 07, 2017 at 10:44:31AM +0100, olivier moysan wrote:
>> This patch adds documentation of device tree bindings for the
>> STM32 SAI ASoC driver.
>>
>> Signed-off-by: olivier moysan <olivier.moysan@st.com>
>> ---
>>  .../devicetree/bindings/sound/st,stm32-sai.txt     | 79 ++++++++++++++++++++++
>>  1 file changed, 79 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>>
>> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>> new file mode 100644
>> index 0000000..b3be26d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>> @@ -0,0 +1,79 @@
>> +STMicroelectronics STM32 Serial Audio Interface (SAI).
>> +
>> +The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
>> +as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
>> +The SAI contains two independent audio sub-blocks. Each sub-block has
>> +its own clock generator and I/O lines controller.
>> +
>> +Required properties:
>> +  - compatible: Should be "st,stm32f4-sai"
>> +  - reg: Base address and size of SAI common register set.
>> +  - clocks: Must contain phandle and clock specifier pairs for each entry
>> +	in clock-names.
>> +  - clock-names: Must contain "clk_x8k" and "clk_x11k"
>> +	"clk_x8k": SAI parent clock for sampling rates multiple of 8kHz.
>> +	"clk_x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
>
> clk_ is redundant.
>

Do you mean, removing clk_ prefix ?

>> +  - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
>> +
>> +Note: Each SAI controller should have an alias correctly numbered
>> +in "aliases" node, to provide explicit name to CPU DAI.
>
> No, it shouldn't. Why do you need that?
>

Yes, this is not mandatory. This is convenient to identify sai 
controller, as we may have up to 8 instances.
I can make it optional, or remove it if you think it is not relevant.

>
>> +
>> +Optional properties:
>> +  - resets: Reference to a reset controller asserting the SAI
>> +
>> +SAI subnodes:
>> +Two subnodes corresponding to SAI sub-block instances A et B can be defined.
>> +Subnode can be omitted for unsused sub-block.
>> +
>> +SAI subnodes required properties:
>> +  - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
>> +	for SAI sub-block A or B respectively.
>> +  - reg: Base address and size of SAI sub-block register set.
>> +  - clocks: Must contain one phandle and clock specifier pair
>> +	for sai_ck which feeds the internal clock generator.
>> +  - clock-names: Must contain "sai_ck".
>> +  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
>> +  - dma-names: identifier string for each DMA request line
>> +	"tx": if sai sub-block is configured as playback DAI
>> +	"rx": if sai sub-block is configured as capture DAI
>> +  - pinctrl-names: should contain only value "default"
>> +  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
>> +
>> +Example:
>> +sai1: sai1@40015800 {
>> +	compatible = "st,stm32f4-sai";
>> +	reg = <0x40015800 0x400>;

	reg = <0x40015800 0x4>;

>> +	clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
>> +	clock-names = "clk_x8k", "clk_x11k";
>> +	interrupts = <87>;
>> +	resets = <&rcc 310>;
>> +
>> +	sai1b: sai@1 {
>
> unit address needs a reg property.
>
> audio-controller@1
>

Right. This needs to be updated as follows:
	sai1b: sai1b@40015824 {
		...
		reg = <0x40015824 0x1C>;
		...
	};

>> +		#sound-dai-cells = <0>;
>> +		compatible = "st,stm32-sai-sub-b";
>> +		clocks = <&rcc 1 CLK_SAI2>;
>> +		clock-names = "sai_ck";
>> +		dmas = <&dma2 5 0 0x400 0x1>;
>> +		dma-names = "tx";
>> +	};
>> +};
>> +
>> +sound {
>> +	compatible = "simple-audio-card";
>
> Perhaps you want to use the graph-card here. It's getting close to
> merging.
>

mclk-fs property is required when SAI is configured as master.
It seems that mclk-fs is not supported in current version
of audio graph card. So I thing I should keep simple card for the time 
being. Anyway, I plan further updates for SAI, so I will
have opportunity to change to graph card at that time.

>> +	simple-audio-card,name = "STM32-Sound-Card";
>> +	status = "okay";
>> +
>> +	simple-audio-card,dai-link@0 {
>> +		format = "i2s";

		mclk-fs = <256>;

>> +		cpu {
>> +			sound-dai = <&sai1b>;
>> +		};
>> +		codec {
>> +			sound-dai = <&codec>;
>> +		};
>> +	};
>> +};
>> +
>> +aliases {
>> +	sai1 = &sai1;
>> +};
>> --
>> 1.9.1
>>

regards
olivier
Rob Herring March 18, 2017, 8:43 p.m. UTC | #3
On Thu, Mar 16, 2017 at 5:50 AM, Olivier MOYSAN <olivier.moysan@st.com> wrote:
> Hello Rob,
>
> Thanks for your feedback.
>
> On 03/15/2017 06:46 PM, Rob Herring wrote:
>> On Tue, Mar 07, 2017 at 10:44:31AM +0100, olivier moysan wrote:
>>> This patch adds documentation of device tree bindings for the
>>> STM32 SAI ASoC driver.
>>>
>>> Signed-off-by: olivier moysan <olivier.moysan@st.com>
>>> ---
>>>  .../devicetree/bindings/sound/st,stm32-sai.txt     | 79 ++++++++++++++++++++++
>>>  1 file changed, 79 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>>> new file mode 100644
>>> index 0000000..b3be26d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>>> @@ -0,0 +1,79 @@
>>> +STMicroelectronics STM32 Serial Audio Interface (SAI).
>>> +
>>> +The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
>>> +as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
>>> +The SAI contains two independent audio sub-blocks. Each sub-block has
>>> +its own clock generator and I/O lines controller.
>>> +
>>> +Required properties:
>>> +  - compatible: Should be "st,stm32f4-sai"
>>> +  - reg: Base address and size of SAI common register set.
>>> +  - clocks: Must contain phandle and clock specifier pairs for each entry
>>> +    in clock-names.
>>> +  - clock-names: Must contain "clk_x8k" and "clk_x11k"
>>> +    "clk_x8k": SAI parent clock for sampling rates multiple of 8kHz.
>>> +    "clk_x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
>>
>> clk_ is redundant.
>>
>
> Do you mean, removing clk_ prefix ?

Yes.

>
>>> +  - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
>>> +
>>> +Note: Each SAI controller should have an alias correctly numbered
>>> +in "aliases" node, to provide explicit name to CPU DAI.
>>
>> No, it shouldn't. Why do you need that?
>>
>
> Yes, this is not mandatory. This is convenient to identify sai
> controller, as we may have up to 8 instances.
> I can make it optional, or remove it if you think it is not relevant.

Remove it.

>
>>
>>> +
>>> +Optional properties:
>>> +  - resets: Reference to a reset controller asserting the SAI
>>> +
>>> +SAI subnodes:
>>> +Two subnodes corresponding to SAI sub-block instances A et B can be defined.
>>> +Subnode can be omitted for unsused sub-block.
>>> +
>>> +SAI subnodes required properties:
>>> +  - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
>>> +    for SAI sub-block A or B respectively.
>>> +  - reg: Base address and size of SAI sub-block register set.
>>> +  - clocks: Must contain one phandle and clock specifier pair
>>> +    for sai_ck which feeds the internal clock generator.
>>> +  - clock-names: Must contain "sai_ck".
>>> +  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
>>> +  - dma-names: identifier string for each DMA request line
>>> +    "tx": if sai sub-block is configured as playback DAI
>>> +    "rx": if sai sub-block is configured as capture DAI
>>> +  - pinctrl-names: should contain only value "default"
>>> +  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
>>> +
>>> +Example:
>>> +sai1: sai1@40015800 {
>>> +    compatible = "st,stm32f4-sai";
>>> +    reg = <0x40015800 0x400>;
>
>         reg = <0x40015800 0x4>;
>
>>> +    clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
>>> +    clock-names = "clk_x8k", "clk_x11k";
>>> +    interrupts = <87>;
>>> +    resets = <&rcc 310>;
>>> +
>>> +    sai1b: sai@1 {
>>
>> unit address needs a reg property.
>>
>> audio-controller@1
>>
>
> Right. This needs to be updated as follows:
>         sai1b: sai1b@40015824 {

audio-controller@...

>                 ...
>                 reg = <0x40015824 0x1C>;
>                 ...
>         };
>
>>> +            #sound-dai-cells = <0>;
>>> +            compatible = "st,stm32-sai-sub-b";
>>> +            clocks = <&rcc 1 CLK_SAI2>;
>>> +            clock-names = "sai_ck";
>>> +            dmas = <&dma2 5 0 0x400 0x1>;
>>> +            dma-names = "tx";
>>> +    };
>>> +};
>>> +
>>> +sound {
>>> +    compatible = "simple-audio-card";
>>
>> Perhaps you want to use the graph-card here. It's getting close to
>> merging.
>>
>
> mclk-fs property is required when SAI is configured as master.
> It seems that mclk-fs is not supported in current version
> of audio graph card. So I thing I should keep simple card for the time
> being. Anyway, I plan further updates for SAI, so I will
> have opportunity to change to graph card at that time.

Well, it's not easy to switch later and maintain compatibility. Is it
complicated to add mclk-fs property? The intent is graph-card supports
everything simple-card supports.

Rob
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
new file mode 100644
index 0000000..b3be26d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -0,0 +1,79 @@ 
+STMicroelectronics STM32 Serial Audio Interface (SAI).
+
+The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
+as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
+The SAI contains two independent audio sub-blocks. Each sub-block has
+its own clock generator and I/O lines controller.
+
+Required properties:
+  - compatible: Should be "st,stm32f4-sai"
+  - reg: Base address and size of SAI common register set.
+  - clocks: Must contain phandle and clock specifier pairs for each entry
+	in clock-names.
+  - clock-names: Must contain "clk_x8k" and "clk_x11k"
+	"clk_x8k": SAI parent clock for sampling rates multiple of 8kHz.
+	"clk_x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
+  - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
+
+Note: Each SAI controller should have an alias correctly numbered
+in "aliases" node, to provide explicit name to CPU DAI.
+
+Optional properties:
+  - resets: Reference to a reset controller asserting the SAI
+
+SAI subnodes:
+Two subnodes corresponding to SAI sub-block instances A et B can be defined.
+Subnode can be omitted for unsused sub-block.
+
+SAI subnodes required properties:
+  - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
+	for SAI sub-block A or B respectively.
+  - reg: Base address and size of SAI sub-block register set.
+  - clocks: Must contain one phandle and clock specifier pair
+	for sai_ck which feeds the internal clock generator.
+  - clock-names: Must contain "sai_ck".
+  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
+  - dma-names: identifier string for each DMA request line
+	"tx": if sai sub-block is configured as playback DAI
+	"rx": if sai sub-block is configured as capture DAI
+  - pinctrl-names: should contain only value "default"
+  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+
+Example:
+sai1: sai1@40015800 {
+	compatible = "st,stm32f4-sai";
+	reg = <0x40015800 0x400>;
+	clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
+	clock-names = "clk_x8k", "clk_x11k";
+	interrupts = <87>;
+	resets = <&rcc 310>;
+
+	sai1b: sai@1 {
+		#sound-dai-cells = <0>;
+		compatible = "st,stm32-sai-sub-b";
+		clocks = <&rcc 1 CLK_SAI2>;
+		clock-names = "sai_ck";
+		dmas = <&dma2 5 0 0x400 0x1>;
+		dma-names = "tx";
+	};
+};
+
+sound {
+	compatible = "simple-audio-card";
+	simple-audio-card,name = "STM32-Sound-Card";
+	status = "okay";
+
+	simple-audio-card,dai-link@0 {
+		format = "i2s";
+		cpu {
+			sound-dai = <&sai1b>;
+		};
+		codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+aliases {
+	sai1 = &sai1;
+};