Message ID | 1493214513-12245-1-git-send-email-geoff@kuvee.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Samuel Ortiz |
Headers | show |
Am 26.04.2017 15:48, schrieb Geoff Lansberry: > In prior commits the selected clock frequency does not propagate > correctly to what is written the the TRF7970A_MODULATOR_SYS_CLK_CTRL > register. > Also fixes a bug that causes the device tree property check to always > pass. > > Signed-off-by: Geoff Lansberry <geoff@kuvee.com> > --- > drivers/nfc/trf7970a.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c > index 2d1c8ca..c278b0e 100644 > --- a/drivers/nfc/trf7970a.c > +++ b/drivers/nfc/trf7970a.c > @@ -2071,7 +2071,7 @@ static int trf7970a_probe(struct spi_device *spi) > } > > of_property_read_u32(np, "clock-frequency", &clk_freq); > - if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) || > + if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) && > (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUENCY)) { > dev_err(trf->dev, > "clock-frequency (%u Hz) unsupported\n", > @@ -2079,6 +2079,13 @@ static int trf7970a_probe(struct spi_device *spi) > return -EINVAL; > } > > + if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) { > + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ; > + dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n"); > + } else { > + trf->modulator_sys_clk_ctrl = 0; > + } > + I am a fan of defensive programming and would move do: trf->modulator_sys_clk_ctrl = 0; if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) { trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ; dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n"); } perhaps using a switch/case here is appropriate IMHO a border case for 2 case but would make the init code more clear. just my 2 cents, re, wh > if (of_property_read_bool(np, "en2-rf-quirk")) > trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW; >
On Wed, Apr 26, 2017 at 09:48:33AM -0400, Geoff Lansberry wrote: > In prior commits the selected clock frequency does not propagate > correctly to what is written the the TRF7970A_MODULATOR_SYS_CLK_CTRL > register. > Also fixes a bug that causes the device tree property check to always > pass. > > Signed-off-by: Geoff Lansberry <geoff@kuvee.com> > --- > drivers/nfc/trf7970a.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c > index 2d1c8ca..c278b0e 100644 > --- a/drivers/nfc/trf7970a.c > +++ b/drivers/nfc/trf7970a.c > @@ -2071,7 +2071,7 @@ static int trf7970a_probe(struct spi_device *spi) > } > > of_property_read_u32(np, "clock-frequency", &clk_freq); > - if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) || > + if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) && There is already a patch submitted to fix this issue so no need to fix it again. For the record, it should have been in a separate patch since it fixes a different issue than what is fixed below. > (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUENCY)) { > dev_err(trf->dev, > "clock-frequency (%u Hz) unsupported\n", > @@ -2079,6 +2079,13 @@ static int trf7970a_probe(struct spi_device *spi) > return -EINVAL; > } > > + if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) { > + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ; > + dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n"); > + } else { > + trf->modulator_sys_clk_ctrl = 0; > + } > + > if (of_property_read_bool(np, "en2-rf-quirk")) > trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW; This part looks okay to me but I like Walter's suggestion too. Mark --
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index 2d1c8ca..c278b0e 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -2071,7 +2071,7 @@ static int trf7970a_probe(struct spi_device *spi) } of_property_read_u32(np, "clock-frequency", &clk_freq); - if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) || + if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) && (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUENCY)) { dev_err(trf->dev, "clock-frequency (%u Hz) unsupported\n", @@ -2079,6 +2079,13 @@ static int trf7970a_probe(struct spi_device *spi) return -EINVAL; } + if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) { + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ; + dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n"); + } else { + trf->modulator_sys_clk_ctrl = 0; + } + if (of_property_read_bool(np, "en2-rf-quirk")) trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW;
In prior commits the selected clock frequency does not propagate correctly to what is written the the TRF7970A_MODULATOR_SYS_CLK_CTRL register. Also fixes a bug that causes the device tree property check to always pass. Signed-off-by: Geoff Lansberry <geoff@kuvee.com> --- drivers/nfc/trf7970a.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)