| Message ID | 1500301019-9960-5-git-send-email-jacob-chen@iotwrt.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Montag, 17. Juli 2017, 22:16:58 CEST schrieb Jacob Chen: > Add an mipi node, and also add mipi endpoints to vopb and vopl > output port nodes. > > Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> > --- > arch/arm64/boot/dts/rockchip/rk3399.dtsi | 44 ++++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi > index c0371af..5c5c9d9 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi > @@ -1475,6 +1475,11 @@ > #address-cells = <1>; > #size-cells = <0>; > > + vopl_out_mipi: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&mipi_in_vopl>; > + }; > + > vopl_out_edp: endpoint@1 { > reg = <1>; > remote-endpoint = <&edp_in_vopl>; > @@ -1516,6 +1521,11 @@ > remote-endpoint = <&edp_in_vopb>; > }; > > + vopb_out_mipi: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&mipi_in_vopb>; > + }; > + > }; > }; > > @@ -1531,6 +1541,40 @@ > status = "disabled"; > }; > > + mipi_dsi: mipi@ff960000 { > + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; > + reg = <0x0 0xff960000 0x0 0x8000>; > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, > + <&cru SCLK_DPHY_TX0_CFG>; > + clock-names = "ref", "pclk", "phy_cfg"; > + power-domains = <&power RK3399_PD_VIO>; > + rockchip,grf = <&grf>; > + #address-cells = <1>; > + #size-cells = <0>; I've dropped these, as the ports node does not need a regs property. Similar to edp and hdmi. > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; dropped this reg as well - see above and applied the rest for 4.14 Thanks Heiko
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index c0371af..5c5c9d9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1475,6 +1475,11 @@ #address-cells = <1>; #size-cells = <0>; + vopl_out_mipi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_in_vopl>; + }; + vopl_out_edp: endpoint@1 { reg = <1>; remote-endpoint = <&edp_in_vopl>; @@ -1516,6 +1521,11 @@ remote-endpoint = <&edp_in_vopb>; }; + vopb_out_mipi: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_in_vopb>; + }; + }; }; @@ -1531,6 +1541,40 @@ status = "disabled"; }; + mipi_dsi: mipi@ff960000 { + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xff960000 0x0 0x8000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_DPHY_TX0_CFG>; + clock-names = "ref", "pclk", "phy_cfg"; + power-domains = <&power RK3399_PD_VIO>; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + }; + }; + edp: edp@ff970000 { compatible = "rockchip,rk3399-edp"; reg = <0x0 0xff970000 0x0 0x8000>;
Add an mipi node, and also add mipi endpoints to vopb and vopl output port nodes. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 44 ++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+)