diff mbox

[1/8] dt-bindings: mediatek: Add binding for mt2712 IOMMU and SMI

Message ID 1502445377-26936-2-git-send-email-yong.wu@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yong Wu (吴勇) Aug. 11, 2017, 9:56 a.m. UTC
This patch adds decriptions for mt2712 IOMMU and SMI.

In order to balance the bandwidth, mt2712 has two M4Us, two
smi-commons, 8 smi-larbs. and mt2712 is also MTK IOMMU gen2 which
use Short-Descriptor translation table format.

The mt2712 M4U-SMI HW diagram is as below:

                            EMI
                             |
              -------------------------------
              |                             |
             M4U0                          M4U1
              |                             |
         smi-common0                   smi-common1
              |                             |
  -------------------------       --------------------
  |     |     |     |     |       |         |        |
  |     |     |     |     |       |         |        |
larb0 larb1 larb2 larb3 larb6    larb4    larb5     larb7
disp0 vdec  cam   venc   jpg  mdp1/disp1 mdp2/disp2  mdp3->larb names

All the connections are HW fixed, SW can NOT adjust it.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../devicetree/bindings/iommu/mediatek,iommu.txt   |  6 +-
 .../memory-controllers/mediatek,smi-common.txt     |  6 +-
 .../memory-controllers/mediatek,smi-larb.txt       |  5 +-
 include/dt-bindings/memory/mt2712-larb-port.h      | 91 ++++++++++++++++++++++
 4 files changed, 102 insertions(+), 6 deletions(-)
 create mode 100644 include/dt-bindings/memory/mt2712-larb-port.h

Comments

Rob Herring (Arm) Aug. 17, 2017, 3:33 p.m. UTC | #1
On Fri, Aug 11, 2017 at 05:56:10PM +0800, Yong Wu wrote:
> This patch adds decriptions for mt2712 IOMMU and SMI.
> 
> In order to balance the bandwidth, mt2712 has two M4Us, two
> smi-commons, 8 smi-larbs. and mt2712 is also MTK IOMMU gen2 which
> use Short-Descriptor translation table format.

s/use/uses/

> 
> The mt2712 M4U-SMI HW diagram is as below:
> 
>                             EMI
>                              |
>               -------------------------------
>               |                             |
>              M4U0                          M4U1
>               |                             |
>          smi-common0                   smi-common1
>               |                             |
>   -------------------------       --------------------
>   |     |     |     |     |       |         |        |
>   |     |     |     |     |       |         |        |
> larb0 larb1 larb2 larb3 larb6    larb4    larb5     larb7
> disp0 vdec  cam   venc   jpg  mdp1/disp1 mdp2/disp2  mdp3->larb names
> 
> All the connections are HW fixed, SW can NOT adjust it.
> 
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../devicetree/bindings/iommu/mediatek,iommu.txt   |  6 +-
>  .../memory-controllers/mediatek,smi-common.txt     |  6 +-
>  .../memory-controllers/mediatek,smi-larb.txt       |  5 +-
>  include/dt-bindings/memory/mt2712-larb-port.h      | 91 ++++++++++++++++++++++
>  4 files changed, 102 insertions(+), 6 deletions(-)
>  create mode 100644 include/dt-bindings/memory/mt2712-larb-port.h

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
index 53c20ca..df5db73 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
@@ -40,6 +40,7 @@  video decode local arbiter, all these ports are according to the video HW.
 Required properties:
 - compatible : must be one of the following string:
 	"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
+	"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
 	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
 - reg : m4u register base and size.
 - interrupts : the interrupt of m4u.
@@ -50,8 +51,9 @@  Required properties:
 	according to the local arbiter index, like larb0, larb1, larb2...
 - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
 	Specifies the mtk_m4u_id as defined in
-	dt-binding/memory/mt2701-larb-port.h for mt2701 and
-	dt-binding/memory/mt8173-larb-port.h for mt8173
+	dt-binding/memory/mt2701-larb-port.h for mt2701,
+	dt-binding/memory/mt2712-larb-port.h for mt2712, and
+	dt-binding/memory/mt8173-larb-port.h for mt8173.
 
 Example:
 	iommu: iommu@10205000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index aa614b2..615abdd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -2,8 +2,9 @@  SMI (Smart Multimedia Interface) Common
 
 The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 
-Mediatek SMI have two generations of HW architecture, mt8173 uses the second
-generation of SMI HW while mt2701 uses the first generation HW of SMI.
+Mediatek SMI have two generations of HW architecture, mt2712 and mt8173 use
+the second generation of SMI HW while mt2701 uses the first generation HW of
+SMI.
 
 There's slight differences between the two SMI, for generation 2, the
 register which control the iommu port is at each larb's register base. But
@@ -15,6 +16,7 @@  not needed for SMI generation 2.
 Required properties:
 - compatible : must be one of :
 	"mediatek,mt2701-smi-common"
+	"mediatek,mt2712-smi-common"
 	"mediatek,mt8173-smi-common"
 - reg : the register and size of the SMI block.
 - power-domains : a phandle to the power domain of this local arbiter.
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index ddf46b8..083155c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -4,8 +4,9 @@  The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 
 Required properties:
 - compatible : must be one of :
-		"mediatek,mt8173-smi-larb"
 		"mediatek,mt2701-smi-larb"
+		"mediatek,mt2712-smi-larb"
+		"mediatek,mt8173-smi-larb"
 - reg : the register and size of this local arbiter.
 - mediatek,smi : a phandle to the smi_common node.
 - power-domains : a phandle to the power domain of this local arbiter.
@@ -15,7 +16,7 @@  Required properties:
 	    the register.
   - "smi" : It's the clock for transfer data and command.
 
-Required property for mt2701:
+Required property for mt2701 and mt2712:
 - mediatek,larb-id :the hardware id of this larb.
 
 Example:
diff --git a/include/dt-bindings/memory/mt2712-larb-port.h b/include/dt-bindings/memory/mt2712-larb-port.h
new file mode 100644
index 0000000..4d74536
--- /dev/null
+++ b/include/dt-bindings/memory/mt2712-larb-port.h
@@ -0,0 +1,91 @@ 
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Yong Wu <yong.wu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DTS_IOMMU_PORT_MT2712_H
+#define __DTS_IOMMU_PORT_MT2712_H
+
+#define MTK_M4U_ID(larb, port)		(((larb) << 5) | (port))
+
+#define M4U_LARB0_ID			0
+#define M4U_LARB1_ID			1
+#define M4U_LARB2_ID			2
+#define M4U_LARB3_ID			3
+#define M4U_LARB4_ID			4
+#define M4U_LARB5_ID			5
+#define M4U_LARB6_ID			6
+#define M4U_LARB7_ID			7
+
+/* larb0 */
+#define M4U_PORT_DISP_OVL0		MTK_M4U_ID(M4U_LARB0_ID, 0)
+#define M4U_PORT_DISP_RDMA0		MTK_M4U_ID(M4U_LARB0_ID, 1)
+#define M4U_PORT_DISP_WDMA0		MTK_M4U_ID(M4U_LARB0_ID, 2)
+#define M4U_PORT_DISP_OD_R		MTK_M4U_ID(M4U_LARB0_ID, 3)
+#define M4U_PORT_DISP_OD_W		MTK_M4U_ID(M4U_LARB0_ID, 4)
+#define M4U_PORT_MDP_RDMA0		MTK_M4U_ID(M4U_LARB0_ID, 5)
+#define M4U_PORT_MDP_WDMA		MTK_M4U_ID(M4U_LARB0_ID, 6)
+
+/* larb1 */
+#define M4U_PORT_HW_VDEC_MC_EXT		MTK_M4U_ID(M4U_LARB1_ID, 0)
+#define M4U_PORT_HW_VDEC_PP_EXT		MTK_M4U_ID(M4U_LARB1_ID, 1)
+#define M4U_PORT_HW_VDEC_UFO_EXT	MTK_M4U_ID(M4U_LARB1_ID, 2)
+#define M4U_PORT_HW_VDEC_VLD_EXT	MTK_M4U_ID(M4U_LARB1_ID, 3)
+#define M4U_PORT_HW_VDEC_VLD2_EXT	MTK_M4U_ID(M4U_LARB1_ID, 4)
+#define M4U_PORT_HW_VDEC_AVC_MV_EXT	MTK_M4U_ID(M4U_LARB1_ID, 5)
+#define M4U_PORT_HW_VDEC_PRED_RD_EXT	MTK_M4U_ID(M4U_LARB1_ID, 6)
+#define M4U_PORT_HW_VDEC_PRED_WR_EXT	MTK_M4U_ID(M4U_LARB1_ID, 7)
+#define M4U_PORT_HW_VDEC_PPWRAP_EXT	MTK_M4U_ID(M4U_LARB1_ID, 8)
+#define M4U_PORT_HW_VDEC_TILE		MTK_M4U_ID(M4U_LARB1_ID, 9)
+#define M4U_PORT_HW_IMG_RESZ_EXT	MTK_M4U_ID(M4U_LARB1_ID, 10)
+
+/* larb2 */
+#define M4U_PORT_CAM_DMA0		MTK_M4U_ID(M4U_LARB2_ID, 0)
+#define M4U_PORT_CAM_DMA1		MTK_M4U_ID(M4U_LARB2_ID, 1)
+#define M4U_PORT_CAM_DMA2		MTK_M4U_ID(M4U_LARB2_ID, 2)
+
+/* larb3 */
+#define M4U_PORT_VENC_RCPU		MTK_M4U_ID(M4U_LARB3_ID, 0)
+#define M4U_PORT_VENC_REC		MTK_M4U_ID(M4U_LARB3_ID, 1)
+#define M4U_PORT_VENC_BSDMA		MTK_M4U_ID(M4U_LARB3_ID, 2)
+#define M4U_PORT_VENC_SV_COMV		MTK_M4U_ID(M4U_LARB3_ID, 3)
+#define M4U_PORT_VENC_RD_COMV		MTK_M4U_ID(M4U_LARB3_ID, 4)
+#define M4U_PORT_VENC_CUR_CHROMA	MTK_M4U_ID(M4U_LARB3_ID, 5)
+#define M4U_PORT_VENC_REF_CHROMA	MTK_M4U_ID(M4U_LARB3_ID, 6)
+#define M4U_PORT_VENC_CUR_LUMA		MTK_M4U_ID(M4U_LARB3_ID, 7)
+#define M4U_PORT_VENC_REF_LUMA		MTK_M4U_ID(M4U_LARB3_ID, 8)
+
+/* larb4 */
+#define M4U_PORT_DISP_OVL1		MTK_M4U_ID(M4U_LARB4_ID, 0)
+#define M4U_PORT_DISP_RDMA1		MTK_M4U_ID(M4U_LARB4_ID, 1)
+#define M4U_PORT_DISP_WDMA1		MTK_M4U_ID(M4U_LARB4_ID, 2)
+#define M4U_PORT_DISP_OD1_R		MTK_M4U_ID(M4U_LARB4_ID, 3)
+#define M4U_PORT_DISP_OD1_W		MTK_M4U_ID(M4U_LARB4_ID, 4)
+#define M4U_PORT_MDP_RDMA1		MTK_M4U_ID(M4U_LARB4_ID, 5)
+#define M4U_PORT_MDP_WROT1		MTK_M4U_ID(M4U_LARB4_ID, 6)
+
+/* larb5 */
+#define M4U_PORT_DISP_OVL2		MTK_M4U_ID(M4U_LARB5_ID, 0)
+#define M4U_PORT_DISP_WDMA2		MTK_M4U_ID(M4U_LARB5_ID, 1)
+#define M4U_PORT_MDP_RDMA2		MTK_M4U_ID(M4U_LARB5_ID, 2)
+#define M4U_PORT_MDP_WROT0		MTK_M4U_ID(M4U_LARB5_ID, 3)
+
+/* larb6 */
+#define M4U_PORT_JPGDEC_WDMA_0		MTK_M4U_ID(M4U_LARB6_ID, 0)
+#define M4U_PORT_JPGDEC_WDMA_1		MTK_M4U_ID(M4U_LARB6_ID, 1)
+#define M4U_PORT_JPGDEC_BSDMA_0		MTK_M4U_ID(M4U_LARB6_ID, 2)
+#define M4U_PORT_JPGDEC_BSDMA_1		MTK_M4U_ID(M4U_LARB6_ID, 3)
+
+/* larb7 */
+#define M4U_PORT_MDP_RDMA3		MTK_M4U_ID(M4U_LARB7_ID, 0)
+#define M4U_PORT_MDP_WROT2		MTK_M4U_ID(M4U_LARB7_ID, 1)
+
+#endif