| Message ID | 20170908124503.4491-1-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Fri, Sep 08, 2017 at 02:45:02PM +0200, Linus Walleij wrote: > The bindings for the V3 Semiconductor PCI bridge are a tad bit outdated > and predates the more formal format we have adopted for the bindings. > > Update them a bit so it is easier to read, and add the Integrator AP- > specific compatible so we can detect that we are running on that specific > platform. > > Add a second register bank for the configuration memory area. The > device tree specs does specify a memory range for configuration > space but it is not applicable to custom accessors like this. Instead > follow the pattern from the Versatile PCI adapter and simply add > a second register bank for this memory. > > Cc: devicetree@vger.kernel.org > Cc: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Applied both to pci/host-v3-semi for v4.15, thanks! > --- > ChangeLog v3->v4: > - Add bus-range to the example and the required properties. > ChangeLog v2->v3: > - Add a second register bank for the config space. > - Mention that nonpre and pre memory must be 256MB and adjacent > - Make the prefetched and non-prefetched memory mapped 1:1 to > the PCI address space so that local bus 0x40000000 and > 0x50000000 maps to the *same* local (CPU) bus addresses. > - Add reference to dma-ranges and that this is required. > - Add an example from the ARM Integrator/AP > - Rob ACKed an earlier version, he might want to have a glance > at this before merging. > ChangeLog v1->v2: > - Added Rob's ACK. > > Bjorn: please merge this when you feel confident with it. > --- > .../devicetree/bindings/pci/v3-v360epc-pci.txt | 75 ++++++++++++++++++++-- > 1 file changed, 68 insertions(+), 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt > index 30b364e504ba..11063293f761 100644 > --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt > +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt > @@ -2,14 +2,75 @@ V3 Semiconductor V360 EPC PCI bridge > > This bridge is found in the ARM Integrator/AP (Application Platform) > > -Integrator-specific notes: > +Required properties: > +- compatible: should be one of: > + "v3,v360epc-pci" > + "arm,integrator-ap-pci", "v3,v360epc-pci" > +- reg: should contain two register areas: > + first the base address of the V3 host bridge controller, 64KB > + second the configuration area register space, 16MB > +- interrupts: should contain a reference to the V3 error interrupt > + as routed on the system. > +- bus-range: see pci.txt > +- ranges: this follows the standard PCI bindings in the IEEE Std > + 1275-1994 (see pci.txt) with the following restriction: > + - The non-prefetchable and prefetchable memory windows must > + each be exactly 256MB (0x10000000) in size. > + - The prefetchable memory window must be immediately adjacent > + to the non-prefetcable memory window > +- dma-ranges: three ranges for the inbound memory region. The ranges must > + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, > + 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked > + as pre-fetchable. Two ranges are supported by the hardware. > > -- syscon: should contain a link to the syscon device node (since > +Integrator-specific required properties: > +- syscon: should contain a link to the syscon device node, since > on the Integrator, some registers in the syscon are required to > - operate the V3). > + operate the V3 host bridge. > > -V360 EPC specific notes: > +Example: > > -- reg: should contain the base address of the V3 adapter. > -- interrupts: should contain a reference to the V3 error interrupt > - as routed on the system. > +pci: pciv3@62000000 { > + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; > + #interrupt-cells = <1>; > + #size-cells = <2>; > + #address-cells = <3>; > + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; > + interrupt-parent = <&pic>; > + interrupts = <17>; /* Bus error IRQ */ > + clocks = <&pciclk>; > + bus-range = <0x00 0xff>; > + ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ > + 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ > + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ > + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ > + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ > + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ > + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ > + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ > + 0x02000000 0 0x80000000 /* Core module alias memory */ > + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ > + interrupt-map-mask = <0xf800 0 0 0x7>; > + interrupt-map = < > + /* IDSEL 9 */ > + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ > + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ > + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ > + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ > + /* IDSEL 10 */ > + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ > + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ > + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ > + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ > + /* IDSEL 11 */ > + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ > + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ > + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ > + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ > + /* IDSEL 12 */ > + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ > + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ > + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ > + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ > + >; > +}; > -- > 2.13.5 >
On Tue, Sep 26, 2017 at 9:16 PM, Bjorn Helgaas <helgaas@kernel.org> wrote: > On Fri, Sep 08, 2017 at 02:45:02PM +0200, Linus Walleij wrote: >> The bindings for the V3 Semiconductor PCI bridge are a tad bit outdated >> and predates the more formal format we have adopted for the bindings. >> >> Update them a bit so it is easier to read, and add the Integrator AP- >> specific compatible so we can detect that we are running on that specific >> platform. >> >> Add a second register bank for the configuration memory area. The >> device tree specs does specify a memory range for configuration >> space but it is not applicable to custom accessors like this. Instead >> follow the pattern from the Versatile PCI adapter and simply add >> a second register bank for this memory. >> >> Cc: devicetree@vger.kernel.org >> Cc: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> >> Acked-by: Rob Herring <robh@kernel.org> >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > > Applied both to pci/host-v3-semi for v4.15, thanks! Oh it fails to build right now (as the zeroday builder noticed) since it is using Marc Gonzalez new helper for DMA ranges parsing. If Marc's patches are getting applied they will solve the issue so I wouldn't care in that case. Yours, Linus Walleij
On Wed, Sep 27, 2017 at 03:25:53PM +0200, Linus Walleij wrote: > On Tue, Sep 26, 2017 at 9:16 PM, Bjorn Helgaas <helgaas@kernel.org> wrote: > > On Fri, Sep 08, 2017 at 02:45:02PM +0200, Linus Walleij wrote: > >> The bindings for the V3 Semiconductor PCI bridge are a tad bit outdated > >> and predates the more formal format we have adopted for the bindings. > >> > >> Update them a bit so it is easier to read, and add the Integrator AP- > >> specific compatible so we can detect that we are running on that specific > >> platform. > >> > >> Add a second register bank for the configuration memory area. The > >> device tree specs does specify a memory range for configuration > >> space but it is not applicable to custom accessors like this. Instead > >> follow the pattern from the Versatile PCI adapter and simply add > >> a second register bank for this memory. > >> > >> Cc: devicetree@vger.kernel.org > >> Cc: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> > >> Acked-by: Rob Herring <robh@kernel.org> > >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > > > > Applied both to pci/host-v3-semi for v4.15, thanks! > > Oh it fails to build right now (as the zeroday builder noticed) > since it is using Marc Gonzalez new helper for DMA ranges > parsing. > > If Marc's patches are getting applied they will solve the issue > so I wouldn't care in that case. I applied Marc's patches and rebased pci/host-v3-semi on top of his patch that adds the helper. Sorry I didn't notice this up front!
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt index 30b364e504ba..11063293f761 100644 --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -2,14 +2,75 @@ V3 Semiconductor V360 EPC PCI bridge This bridge is found in the ARM Integrator/AP (Application Platform) -Integrator-specific notes: +Required properties: +- compatible: should be one of: + "v3,v360epc-pci" + "arm,integrator-ap-pci", "v3,v360epc-pci" +- reg: should contain two register areas: + first the base address of the V3 host bridge controller, 64KB + second the configuration area register space, 16MB +- interrupts: should contain a reference to the V3 error interrupt + as routed on the system. +- bus-range: see pci.txt +- ranges: this follows the standard PCI bindings in the IEEE Std + 1275-1994 (see pci.txt) with the following restriction: + - The non-prefetchable and prefetchable memory windows must + each be exactly 256MB (0x10000000) in size. + - The prefetchable memory window must be immediately adjacent + to the non-prefetcable memory window +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, + 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked + as pre-fetchable. Two ranges are supported by the hardware. -- syscon: should contain a link to the syscon device node (since +Integrator-specific required properties: +- syscon: should contain a link to the syscon device node, since on the Integrator, some registers in the syscon are required to - operate the V3). + operate the V3 host bridge. -V360 EPC specific notes: +Example: -- reg: should contain the base address of the V3 adapter. -- interrupts: should contain a reference to the V3 error interrupt - as routed on the system. +pci: pciv3@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ + 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; +};