diff mbox

[PATCHv3,1/2] ath10k: add per peer htt tx stats support for 10.4

Message ID 1479227849-10042-1-git-send-email-akolli@qti.qualcomm.com (mailing list archive)
State Accepted
Commit cec17c382140a17ad54853a4b57a84588f090806
Delegated to: Kalle Valo
Headers show

Commit Message

akolli@qti.qualcomm.com Nov. 15, 2016, 4:37 p.m. UTC
From: Anilkumar Kolli <akolli@qti.qualcomm.com>

Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
event, Firmware sends one HTT event for every four PPDUs.
HTT payload has success pkts/bytes, failed pkts/bytes, retry
pkts/bytes and rate info per ppdu.
Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
which are nowadays enabled by default.

Parse peer stats and update the tx rate information per STA.

tx rate, Peer stats are tested on QCA4019 with Firmware version
10.4-3.2.1-00028.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
v2:
 * address Kalle's comments
 * fix compilation warnings
v3:
 * fix compilation warnings (kvalo)

 drivers/net/wireless/ath/ath10k/core.h   |   17 ++++
 drivers/net/wireless/ath/ath10k/htt.c    |    2 +
 drivers/net/wireless/ath/ath10k/htt.h    |   25 ++++++
 drivers/net/wireless/ath/ath10k/htt_rx.c |  125 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h    |   10 ++-
 5 files changed, 178 insertions(+), 1 deletion(-)

Comments

Kalle Valo Nov. 23, 2016, 7:40 p.m. UTC | #1
akolli@qti.qualcomm.com wrote:
> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
> 
> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
> event, Firmware sends one HTT event for every four PPDUs.
> HTT payload has success pkts/bytes, failed pkts/bytes, retry
> pkts/bytes and rate info per ppdu.
> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
> which are nowadays enabled by default.
> 
> Parse peer stats and update the tx rate information per STA.
> 
> tx rate, Peer stats are tested on QCA4019 with Firmware version
> 10.4-3.2.1-00028.
> 
> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>

2 patches applied to ath-next branch of ath.git, thanks.

cec17c382140 ath10k: add per peer htt tx stats support for 10.4
5608eaf7b086 ath10k: add support for per sta tx bitrate
Sven Eckelmann May 11, 2017, 8:40 a.m. UTC | #2
On Dienstag, 15. November 2016 22:07:29 CEST akolli@qti.qualcomm.com wrote:
> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
> 
> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
> event, Firmware sends one HTT event for every four PPDUs.
> HTT payload has success pkts/bytes, failed pkts/bytes, retry
> pkts/bytes and rate info per ppdu.
> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
> which are nowadays enabled by default.
> 
> Parse peer stats and update the tx rate information per STA.
> 
> tx rate, Peer stats are tested on QCA4019 with Firmware version
> 10.4-3.2.1-00028.
> 
> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
> ---

Just played a little bit around with it and an 802.11n client (2x2x). The 
thing I've observed was that MCS 0-7 was reported as MCS rate but the client 
received mostly MCS 8-15.

Guessing from this section

>	if (((txrate.flags == WMI_RATE_PREAMBLE_HT) ||
>	     (txrate.flags == WMI_RATE_PREAMBLE_VHT)) && txrate.mcs > 9) {
>		ath10k_warn(ar, "Invalid mcs %hhd peer stats", txrate.mcs);
>		return;
>	}

it looks like HT rates are reported as 0-9 with an NSS setting (yes, as odd as 
this is). I've printed the values to check it:

[   68.529197] XXXXX txrate.flags 2, txrate.bw 1, txrate.nss 2, txrate.mcs 5
[   68.529500] XXXXX txrate.flags 2, txrate.bw 1, txrate.nss 2, txrate.mcs 4
[   68.535225] XXXXX txrate.flags 2, txrate.bw 1, txrate.nss 2, txrate.mcs 4
[   68.542290] XXXXX txrate.flags 2, txrate.bw 1, txrate.nss 2, txrate.mcs 4
[   68.549507] XXXXX txrate.flags 2, txrate.bw 1, txrate.nss 2, txrate.mcs 4
[   68.555627] XXXXX txrate.flags 2, txrate.bw 1, txrate.nss 2, txrate.mcs 4
[   68.562652] XXXXX txrate.flags 2, txrate.bw 1, txrate.nss 2, txrate.mcs 4

I don't know this for sure but my next guess is now that following change is 
missing:

@@ -2231,8 +2231,10 @@ ath10k_update_per_peer_tx_stats(struct ath10k *ar,
 	sgi = ATH10K_HW_GI(peer_stats->flags);
 
 	if (((txrate.flags == WMI_RATE_PREAMBLE_HT) ||
-	     (txrate.flags == WMI_RATE_PREAMBLE_VHT)) && txrate.mcs > 9) {
-		ath10k_warn(ar, "Invalid mcs %hhd peer stats", txrate.mcs);
+	     (txrate.flags == WMI_RATE_PREAMBLE_VHT)) &&
+	    (txrate.mcs > 9 || txrate.nss < 1)) {
+		ath10k_warn(ar, "Invalid mcs %hhd nss %hhd peer stats",
+			    txrate.mcs, txrate.nss);
 		return;
 	}
 
@@ -2255,7 +2257,7 @@ ath10k_update_per_peer_tx_stats(struct ath10k *ar,
 		arsta->txrate.legacy = rate;
 	} else if (txrate.flags == WMI_RATE_PREAMBLE_HT) {
 		arsta->txrate.flags = RATE_INFO_FLAGS_MCS;
-		arsta->txrate.mcs = txrate.mcs;
+		arsta->txrate.mcs = txrate.mcs + 8 * (txrate.nss - 1);
 	} else {
 		arsta->txrate.flags = RATE_INFO_FLAGS_VHT_MCS;
 		arsta->txrate.mcs = txrate.mcs;

Funny enough, I was spamming following with my 802.11n!!!! 2x2 client:

[  115.694987] XXXXX txrate.flags 3, txrate.bw 1, txrate.nss 4, txrate.mcs 15
[  115.701851] ath10k_ahb a800000.wifi: Invalid mcs 15 peer stats

Firmware was 10.4-3.2.1-00050 on an Dakota (IPQ401X) board.

Kind regards,
	Sven
Sven Eckelmann Nov. 17, 2017, 11:06 a.m. UTC | #3
On Dienstag, 15. November 2016 22:07:29 CET akolli@qti.qualcomm.com wrote:
> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
> 
> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
> event, Firmware sends one HTT event for every four PPDUs.
> HTT payload has success pkts/bytes, failed pkts/bytes, retry
> pkts/bytes and rate info per ppdu.
> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
> which are nowadays enabled by default.
> 
> Parse peer stats and update the tx rate information per STA.
> 
> tx rate, Peer stats are tested on QCA4019 with Firmware version
> 10.4-3.2.1-00028.
> 
> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>

Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is 
using pktlog to transfer the PEER_STATS information.

Kind regards,
	Sven
Kalle Valo Nov. 21, 2017, 7:58 a.m. UTC | #4
Sven Eckelmann <sven.eckelmann@openmesh.com> writes:

> On Dienstag, 15. November 2016 22:07:29 CET akolli@qti.qualcomm.com wrote:
>> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
>> 
>> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
>> event, Firmware sends one HTT event for every four PPDUs.
>> HTT payload has success pkts/bytes, failed pkts/bytes, retry
>> pkts/bytes and rate info per ppdu.
>> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
>> which are nowadays enabled by default.
>> 
>> Parse peer stats and update the tx rate information per STA.
>> 
>> tx rate, Peer stats are tested on QCA4019 with Firmware version
>> 10.4-3.2.1-00028.
>> 
>> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
>
> Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is 
> using pktlog to transfer the PEER_STATS information.

I'm not sure what you are asking. If you are asking the firmware release
mentioned in the commit log that's in ath10k-firmware:

https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1

But I'm sure you know that already.
Sebastian Gottschall Nov. 21, 2017, 8 a.m. UTC | #5
Am 21.11.2017 um 08:58 schrieb Kalle Valo:
> Sven Eckelmann <sven.eckelmann@openmesh.com> writes:
>
>> On Dienstag, 15. November 2016 22:07:29 CET akolli@qti.qualcomm.com wrote:
>>> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
>>>
>>> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
>>> event, Firmware sends one HTT event for every four PPDUs.
>>> HTT payload has success pkts/bytes, failed pkts/bytes, retry
>>> pkts/bytes and rate info per ppdu.
>>> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
>>> which are nowadays enabled by default.
>>>
>>> Parse peer stats and update the tx rate information per STA.
>>>
>>> tx rate, Peer stats are tested on QCA4019 with Firmware version
>>> 10.4-3.2.1-00028.
>>>
>>> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
>> Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is
>> using pktlog to transfer the PEER_STATS information.
> I'm not sure what you are asking. If you are asking the firmware release
> mentioned in the commit log that's in ath10k-firmware:
>
> https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1
>
> But I'm sure you know that already.

i believe he is just talking about a patch which allows to get station 
statistics like rx and tx rate on the firmare 10.2 series which is 
qca988x mainly

this patch was posted here months ago but never got upstream

>
Kalle Valo Nov. 21, 2017, 8:06 a.m. UTC | #6
Sebastian Gottschall <s.gottschall@dd-wrt.com> writes:

> Am 21.11.2017 um 08:58 schrieb Kalle Valo:
>> Sven Eckelmann <sven.eckelmann@openmesh.com> writes:
>>
>>> On Dienstag, 15. November 2016 22:07:29 CET akolli@qti.qualcomm.com wrote:
>>>> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
>>>>
>>>> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
>>>> event, Firmware sends one HTT event for every four PPDUs.
>>>> HTT payload has success pkts/bytes, failed pkts/bytes, retry
>>>> pkts/bytes and rate info per ppdu.
>>>> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
>>>> which are nowadays enabled by default.
>>>>
>>>> Parse peer stats and update the tx rate information per STA.
>>>>
>>>> tx rate, Peer stats are tested on QCA4019 with Firmware version
>>>> 10.4-3.2.1-00028.
>>>>
>>>> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
>>> Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is
>>> using pktlog to transfer the PEER_STATS information.
>> I'm not sure what you are asking. If you are asking the firmware release
>> mentioned in the commit log that's in ath10k-firmware:
>>
>> https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1
>>
>> But I'm sure you know that already.
>
> i believe he is just talking about a patch which allows to get station
> statistics like rx and tx rate on the firmare 10.2 series which is
> qca988x mainly
>
> this patch was posted here months ago but never got upstream

Any pointers to the patch? Patch title or link to patchwork would help.
I see hundreds of patches per release, I cannot remember all of them.
Sven Eckelmann Nov. 21, 2017, 8:20 a.m. UTC | #7
On Dienstag, 21. November 2017 09:00:54 CET Sebastian Gottschall wrote:
[...]
> >> Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is
> >> using pktlog to transfer the PEER_STATS information.
> > I'm not sure what you are asking. If you are asking the firmware release
> > mentioned in the commit log that's in ath10k-firmware:
> >
> > https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1
> >
> > But I'm sure you know that already.
> 
> i believe he is just talking about a patch which allows to get station 
> statistics like rx and tx rate on the firmare 10.2 series which is 
> qca988x mainly
> 
> this patch was posted here months ago but never got upstream

Yes, I was talking about that patch (which I didn't find on the mailing list - 
so a link would be helpful). QCA is gathering a lot of patches (a00-*) at 
https://source.codeaurora.org/quic/qsdk/oss/system/feeds/wlan-open/tree/mac80211/patches?h=coconut
which are often not upstreamed. The patch 
a00-0075-ath10k-Add-support-to-parse-per-station-tx-stats-for.patch is the one 
which is receiving the TX statistics stuff from 10.2.

I had a discussion with some QCA employee (or actually OpenMesh had it and I 
joined the discussion rather late) where the QCA employee was very confident 
that ath10k supports ATH10K_PKTLOG_PEER_STATS (not the fw_stats stuff in 
debugfs). But I couldn't find the code for that in ath10k. Only after some 
guesswork, I was able to find the patch mentioned above and was able to test 
it (after hacking the smart antenna patch dependency away).

Kind regards,
	Sven
Kalle Valo Nov. 21, 2017, 8:40 a.m. UTC | #8
Sven Eckelmann <sven.eckelmann@openmesh.com> writes:

> On Dienstag, 21. November 2017 09:00:54 CET Sebastian Gottschall wrote:
> [...]
>> >> Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is
>> >> using pktlog to transfer the PEER_STATS information.
>> > I'm not sure what you are asking. If you are asking the firmware release
>> > mentioned in the commit log that's in ath10k-firmware:
>> >
>> > https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1
>> >
>> > But I'm sure you know that already.
>> 
>> i believe he is just talking about a patch which allows to get station 
>> statistics like rx and tx rate on the firmare 10.2 series which is 
>> qca988x mainly
>> 
>> this patch was posted here months ago but never got upstream
>
> Yes, I was talking about that patch (which I didn't find on the
> mailing list - so a link would be helpful). QCA is gathering a lot of
> patches (a00-*) at
> https://source.codeaurora.org/quic/qsdk/oss/system/feeds/wlan-open/tree/mac80211/patches?h=coconut
> which are often not upstreamed.

Oh, that. I have always told the team working on that repository that
they should upstream everything but obviously they don't :/

> The patch
> a00-0075-ath10k-Add-support-to-parse-per-station-tx-stats-for.patch is
> the one which is receiving the TX statistics stuff from 10.2.

I tried to find that patch from the ath10k list archives but didn't find
it. I only did a quick search so of course it might be submitted still,
so if anyone finds a link please let me know.
Sebastian Gottschall Nov. 21, 2017, 9 a.m. UTC | #9
maybe this one?

i have this qca988x supporting tx/rx rate patch in my local tree. just 
need to extract it again

  ath10k: report per-station tx/rate rates to mac80211

Am 21.11.2017 um 09:40 schrieb Kalle Valo:
> Sven Eckelmann <sven.eckelmann@openmesh.com> writes:
>
>> On Dienstag, 21. November 2017 09:00:54 CET Sebastian Gottschall wrote:
>> [...]
>>>>> Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is
>>>>> using pktlog to transfer the PEER_STATS information.
>>>> I'm not sure what you are asking. If you are asking the firmware release
>>>> mentioned in the commit log that's in ath10k-firmware:
>>>>
>>>> https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1
>>>>
>>>> But I'm sure you know that already.
>>> i believe he is just talking about a patch which allows to get station
>>> statistics like rx and tx rate on the firmare 10.2 series which is
>>> qca988x mainly
>>>
>>> this patch was posted here months ago but never got upstream
>> Yes, I was talking about that patch (which I didn't find on the
>> mailing list - so a link would be helpful). QCA is gathering a lot of
>> patches (a00-*) at
>> https://source.codeaurora.org/quic/qsdk/oss/system/feeds/wlan-open/tree/mac80211/patches?h=coconut
>> which are often not upstreamed.
> Oh, that. I have always told the team working on that repository that
> they should upstream everything but obviously they don't :/
>
>> The patch
>> a00-0075-ath10k-Add-support-to-parse-per-station-tx-stats-for.patch is
>> the one which is receiving the TX statistics stuff from 10.2.
> I tried to find that patch from the ath10k list archives but didn't find
> it. I only did a quick search so of course it might be submitted still,
> so if anyone finds a link please let me know.
>
Sven Eckelmann Nov. 21, 2017, 9:46 a.m. UTC | #10
On Dienstag, 21. November 2017 10:00:20 CET Sebastian Gottschall wrote:
> maybe this one?
> 
> i have this qca988x supporting tx/rx rate patch in my local tree. just 
> need to extract it again
> 
>   ath10k: report per-station tx/rate rates to mac80211

This one sounds like https://patchwork.kernel.org/patch/8597341/ - and it is 
something different (end is implementing get_expected_throughput "wrong" and 
therefore overestimates the expected throughput extremely). This patch is 
using the stuff from fw_stats to fill the station rx/tx information.

It is not the worst thing to do (I want(ed) to use something similar for my 
purposes) but there is a special pktlog message on 10.2 which contains the 
same information as the 10.4 HTT_10_4_T2H_MSG_TYPE_PEER_STATS.

Kind regards,
	Sven
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e8decfaba5b6..2f324a115b18 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -337,6 +337,7 @@  struct ath10k_sta {
 	u32 nss;
 	u32 smps;
 	u16 peer_id;
+	struct rate_info txrate;
 
 	struct work_struct update_wk;
 
@@ -693,6 +694,21 @@  struct ath10k_fw_components {
 	struct ath10k_fw_file fw_file;
 };
 
+struct ath10k_per_peer_tx_stats {
+	u32	succ_bytes;
+	u32	retry_bytes;
+	u32	failed_bytes;
+	u8	ratecode;
+	u8	flags;
+	u16	peer_id;
+	u16	succ_pkts;
+	u16	retry_pkts;
+	u16	failed_pkts;
+	u16	duration;
+	u32	reserved1;
+	u32	reserved2;
+};
+
 struct ath10k {
 	struct ath_common ath_common;
 	struct ieee80211_hw *hw;
@@ -906,6 +922,7 @@  struct ath10k {
 
 	struct ath10k_thermal thermal;
 	struct ath10k_wow wow;
+	struct ath10k_per_peer_tx_stats peer_tx_stats;
 
 	/* NAPI */
 	struct net_device napi_dev;
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 130cd9502021..cd160b16db1e 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -137,6 +137,8 @@ 
 				HTT_T2H_MSG_TYPE_STATS_NOUPLOAD,
 	[HTT_10_4_T2H_MSG_TYPE_TX_MODE_SWITCH_IND] =
 				HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND,
+	[HTT_10_4_T2H_MSG_TYPE_PEER_STATS] =
+				HTT_T2H_MSG_TYPE_PEER_STATS,
 };
 
 int ath10k_htt_connect(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 0d2ed09f202b..164eb3a10566 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -419,6 +419,7 @@  enum htt_10_4_t2h_msg_type {
 	HTT_10_4_T2H_MSG_TYPE_STATS_NOUPLOAD         = 0x18,
 	/* 0x19 to 0x2f are reserved */
 	HTT_10_4_T2H_MSG_TYPE_TX_MODE_SWITCH_IND     = 0x30,
+	HTT_10_4_T2H_MSG_TYPE_PEER_STATS	     = 0x31,
 	/* keep this last */
 	HTT_10_4_T2H_NUM_MSGS
 };
@@ -453,6 +454,7 @@  enum htt_t2h_msg_type {
 	HTT_T2H_MSG_TYPE_TX_FETCH_IND,
 	HTT_T2H_MSG_TYPE_TX_FETCH_CONFIRM,
 	HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND,
+	HTT_T2H_MSG_TYPE_PEER_STATS,
 	/* keep this last */
 	HTT_T2H_NUM_MSGS
 };
@@ -1470,6 +1472,28 @@  struct htt_channel_change {
 	__le32 phymode;
 } __packed;
 
+struct htt_per_peer_tx_stats_ind {
+	__le32	succ_bytes;
+	__le32  retry_bytes;
+	__le32  failed_bytes;
+	u8	ratecode;
+	u8	flags;
+	__le16	peer_id;
+	__le16  succ_pkts;
+	__le16	retry_pkts;
+	__le16	failed_pkts;
+	__le16	tx_duration;
+	__le32	reserved1;
+	__le32	reserved2;
+} __packed;
+
+struct htt_peer_tx_stats {
+	u8 num_ppdu;
+	u8 ppdu_len;
+	u8 version;
+	u8 payload[0];
+} __packed;
+
 union htt_rx_pn_t {
 	/* WEP: 24-bit PN */
 	u32 pn24;
@@ -1521,6 +1545,7 @@  struct htt_resp {
 		struct htt_tx_fetch_confirm tx_fetch_confirm;
 		struct htt_tx_mode_switch_ind tx_mode_switch_ind;
 		struct htt_channel_change chan_change;
+		struct htt_peer_tx_stats peer_tx_stats;
 	};
 } __packed;
 
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 285b235268d7..86d082cf4eef 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2194,6 +2194,128 @@  void ath10k_htt_htc_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		dev_kfree_skb_any(skb);
 }
 
+static inline bool is_valid_legacy_rate(u8 rate)
+{
+	static const u8 legacy_rates[] = {1, 2, 5, 11, 6, 9, 12,
+					  18, 24, 36, 48, 54};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(legacy_rates); i++) {
+		if (rate == legacy_rates[i])
+			return true;
+	}
+
+	return false;
+}
+
+static void
+ath10k_update_per_peer_tx_stats(struct ath10k *ar,
+				struct ieee80211_sta *sta,
+				struct ath10k_per_peer_tx_stats *peer_stats)
+{
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	u8 rate = 0, sgi;
+	struct rate_info txrate;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	txrate.flags = ATH10K_HW_PREAMBLE(peer_stats->ratecode);
+	txrate.bw = ATH10K_HW_BW(peer_stats->flags);
+	txrate.nss = ATH10K_HW_NSS(peer_stats->ratecode);
+	txrate.mcs = ATH10K_HW_MCS_RATE(peer_stats->ratecode);
+	sgi = ATH10K_HW_GI(peer_stats->flags);
+
+	if (((txrate.flags == WMI_RATE_PREAMBLE_HT) ||
+	     (txrate.flags == WMI_RATE_PREAMBLE_VHT)) && txrate.mcs > 9) {
+		ath10k_warn(ar, "Invalid mcs %hhd peer stats", txrate.mcs);
+		return;
+	}
+
+	if (txrate.flags == WMI_RATE_PREAMBLE_CCK ||
+	    txrate.flags == WMI_RATE_PREAMBLE_OFDM) {
+		rate = ATH10K_HW_LEGACY_RATE(peer_stats->ratecode);
+
+		if (!is_valid_legacy_rate(rate)) {
+			ath10k_warn(ar, "Invalid legacy rate %hhd peer stats",
+				    rate);
+			return;
+		}
+
+		/* This is hacky, FW sends CCK rate 5.5Mbps as 6 */
+		rate *= 10;
+		if (rate == 60 && txrate.flags == WMI_RATE_PREAMBLE_CCK)
+			rate = rate - 5;
+		arsta->txrate.legacy = rate * 10;
+	} else if (txrate.flags == WMI_RATE_PREAMBLE_HT) {
+		arsta->txrate.flags = RATE_INFO_FLAGS_MCS;
+		arsta->txrate.mcs = txrate.mcs;
+	} else {
+		arsta->txrate.flags = RATE_INFO_FLAGS_VHT_MCS;
+		arsta->txrate.mcs = txrate.mcs;
+	}
+
+	if (sgi)
+		arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+	arsta->txrate.nss = txrate.nss;
+	arsta->txrate.bw = txrate.bw + RATE_INFO_BW_20;
+}
+
+static void ath10k_htt_fetch_peer_stats(struct ath10k *ar,
+					struct sk_buff *skb)
+{
+	struct htt_resp *resp = (struct htt_resp *)skb->data;
+	struct ath10k_per_peer_tx_stats *p_tx_stats = &ar->peer_tx_stats;
+	struct htt_per_peer_tx_stats_ind *tx_stats;
+	struct ieee80211_sta *sta;
+	struct ath10k_peer *peer;
+	int peer_id, i;
+	u8 ppdu_len, num_ppdu;
+
+	num_ppdu = resp->peer_tx_stats.num_ppdu;
+	ppdu_len = resp->peer_tx_stats.ppdu_len * sizeof(__le32);
+
+	if (skb->len < sizeof(struct htt_resp_hdr) + num_ppdu * ppdu_len) {
+		ath10k_warn(ar, "Invalid peer stats buf length %d\n", skb->len);
+		return;
+	}
+
+	tx_stats = (struct htt_per_peer_tx_stats_ind *)
+			(resp->peer_tx_stats.payload);
+	peer_id = __le16_to_cpu(tx_stats->peer_id);
+
+	rcu_read_lock();
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find_by_id(ar, peer_id);
+	if (!peer) {
+		ath10k_warn(ar, "Invalid peer id %d peer stats buffer\n",
+			    peer_id);
+		goto out;
+	}
+
+	sta = peer->sta;
+	for (i = 0; i < num_ppdu; i++) {
+		tx_stats = (struct htt_per_peer_tx_stats_ind *)
+			   (resp->peer_tx_stats.payload + i * ppdu_len);
+
+		p_tx_stats->succ_bytes = __le32_to_cpu(tx_stats->succ_bytes);
+		p_tx_stats->retry_bytes = __le32_to_cpu(tx_stats->retry_bytes);
+		p_tx_stats->failed_bytes =
+				__le32_to_cpu(tx_stats->failed_bytes);
+		p_tx_stats->ratecode = tx_stats->ratecode;
+		p_tx_stats->flags = tx_stats->flags;
+		p_tx_stats->succ_pkts = __le16_to_cpu(tx_stats->succ_pkts);
+		p_tx_stats->retry_pkts = __le16_to_cpu(tx_stats->retry_pkts);
+		p_tx_stats->failed_pkts = __le16_to_cpu(tx_stats->failed_pkts);
+
+		ath10k_update_per_peer_tx_stats(ar, sta, p_tx_stats);
+	}
+
+out:
+	spin_unlock_bh(&ar->data_lock);
+	rcu_read_unlock();
+}
+
 bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct ath10k_htt *htt = &ar->htt;
@@ -2354,6 +2476,9 @@  bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 	case HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND:
 		ath10k_htt_rx_tx_mode_switch_ind(ar, skb);
 		break;
+	case HTT_T2H_MSG_TYPE_PEER_STATS:
+		ath10k_htt_fetch_peer_stats(ar, skb);
+		break;
 	case HTT_T2H_MSG_TYPE_EN_STATS:
 	default:
 		ath10k_warn(ar, "htt event (%d) not handled\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1b243c899bef..e108d49998c3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4603,9 +4603,17 @@  enum wmi_rate_preamble {
 
 #define ATH10K_HW_NSS(rate)		(1 + (((rate) >> 4) & 0x3))
 #define ATH10K_HW_PREAMBLE(rate)	(((rate) >> 6) & 0x3)
-#define ATH10K_HW_RATECODE(rate, nss, preamble)	\
+#define ATH10K_HW_MCS_RATE(rate)	((rate) & 0xf)
+#define ATH10K_HW_LEGACY_RATE(rate)	((rate) & 0x3f)
+#define ATH10K_HW_BW(flags)		(((flags) >> 3) & 0x3)
+#define ATH10K_HW_GI(flags)		(((flags) >> 5) & 0x1)
+#define ATH10K_HW_RATECODE(rate, nss, preamble) \
 	(((preamble) << 6) | ((nss) << 4) | (rate))
 
+#define VHT_MCS_NUM     10
+#define VHT_BW_NUM      4
+#define VHT_NSS_NUM     4
+
 /* Value to disable fixed rate setting */
 #define WMI_FIXED_RATE_NONE    (0xff)