diff mbox

[v4,7/7] ARM: dts: stm32: add initial support of stm32mp157c eval board

Message ID 1516111941-12635-8-git-send-email-ludovic.Barre@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ludovic BARRE Jan. 16, 2018, 2:12 p.m. UTC
From: Ludovic Barre <ludovic.barre@st.com>

Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1)
split in 2 elements:
-Daughter board (part number: STM32MP157C-ED1)
 which includes CPU, memory and power supply
-Mother board (part number: STM32MP157C-EM1)
 which includes external peripherals (like display, camera,...)
 and extension connectors.

The daughter board can run alone, this is why the device tree files
are split in two layers, for the complete evaluation board (ev1)
and for the daughter board alone (ed1).

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
---
 arch/arm/boot/dts/Makefile                |  6 ++++--
 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 13 +++++++++++++
 arch/arm/boot/dts/stm32mp157c-ed1.dts     | 32 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32mp157c-ev1.dts     | 21 ++++++++++++++++++++
 4 files changed, 70 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts

Comments

Arnd Bergmann Jan. 16, 2018, 2:25 p.m. UTC | #1
On Tue, Jan 16, 2018 at 3:12 PM, Ludovic Barre <ludovic.Barre@st.com> wrote:

> +
> +       aliases {
> +               serial3 = &uart4;
> +       };

Why 'serial3' ? If you have multiple UARTS on this board, just list
all of them, otherwise
start with 'serial0'.

       Arnd
Ludovic BARRE Jan. 16, 2018, 2:28 p.m. UTC | #2
On 01/16/2018 03:25 PM, Arnd Bergmann wrote:
> On Tue, Jan 16, 2018 at 3:12 PM, Ludovic Barre <ludovic.Barre@st.com> wrote:
> 
>> +
>> +       aliases {
>> +               serial3 = &uart4;
>> +       };
> 
> Why 'serial3' ? If you have multiple UARTS on this board, just list
> all of them, otherwise
> start with 'serial0'.
> 
>         Arnd
>
sorry, I fix that :-(

BR
Ludo
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..d72c71c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -839,7 +839,7 @@  dtb-$(CONFIG_ARCH_STI) += \
 	stih410-b2120.dtb \
 	stih410-b2260.dtb \
 	stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= \
+dtb-$(CONFIG_ARCH_STM32) += \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
 	stm32f746-disco.dtb \
@@ -847,7 +847,9 @@  dtb-$(CONFIG_ARCH_STM32)+= \
 	stm32429i-eval.dtb \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
-	stm32h743i-disco.dtb
+	stm32h743i-disco.dtb \
+	stm32mp157c-ed1.dtb \
+	stm32mp157c-ev1.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 440276a..7ac65f4 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -145,6 +145,19 @@ 
 				ngpios = <8>;
 				gpio-ranges = <&pinctrl 0 160 8>;
 			};
+
+			uart4_pins_a: uart4@0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+					bias-disable;
+				};
+			};
 		};
 
 		pinctrl_z: pin-controller-z {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
new file mode 100644
index 0000000..f52eba9
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,32 @@ 
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved 
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C eval daughter";
+	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	aliases {
+		serial3 = &uart4;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
new file mode 100644
index 0000000..d7dc9bb
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -0,0 +1,21 @@ 
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved 
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+
+/ {
+	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	aliases {
+		serial3 = &uart4;
+	};
+};