Message ID | 1519638811-17269-15-git-send-email-sricharan@codeaurora.org (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
On 26-02-18, 15:23, Sricharan R wrote: > From: Stephen Boyd <sboyd@codeaurora.org> Is this email id still valid ? > +static int __init qcom_cpufreq_populate_opps(struct nvmem_cell *pvs_nvmem, > + struct opp_table **tbl) > +{ > + int speed = 0, pvs = 0, pvs_ver = 0, cpu; > + struct device *cpu_dev; > + u8 *buf; > + size_t len; > + char pvs_name[] = "speedXX-pvsXX-vXX"; > + > + buf = nvmem_cell_read(pvs_nvmem, &len); > + if (len == 4) > + get_krait_bin_format_a(&speed, &pvs, &pvs_ver, pvs_nvmem, buf); > + else if (len == 8) > + get_krait_bin_format_b(&speed, &pvs, &pvs_ver, pvs_nvmem, buf); > + else > + pr_warn("Unable to read nvmem data. Defaulting to 0!\n"); > + > + snprintf(pvs_name, sizeof(pvs_name), "speed%d-pvs%d-v%d", > + speed, pvs, pvs_ver); > + > + for (cpu = 0; cpu < num_possible_cpus(); cpu++) { > + cpu_dev = get_cpu_device(cpu); > + if (!cpu_dev) > + return -ENODEV; > + > + tbl[cpu] = dev_pm_opp_set_prop_name(cpu_dev, pvs_name); > + > + if (IS_ERR(tbl[cpu])) { > + tbl[cpu] = 0; > + pr_warn("failed to add OPP name %s\n", pvs_name); > + return PTR_ERR(tbl[cpu]); You just set tbl[cpu] to 0 :) > + } > + } > + > + return 0; > +} > + > +static int __init qcom_cpufreq_driver_init(void) > +{ > + struct platform_device *pdev; > + struct device *cpu_dev; > + struct device_node *np; > + struct nvmem_cell *pvs_nvmem; > + struct opp_table *tbl[NR_CPUS] = { NULL }; > + int ret, cpu = 0; > + > + cpu_dev = get_cpu_device(0); > + if (!cpu_dev) > + return -ENODEV; > + > + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); > + if (!np) > + return -ENOENT; > + > + if (!of_device_is_compatible(np, "operating-points-v2-krait-cpu")) { > + ret = -ENOENT; > + goto free_np; > + } > + > + pvs_nvmem = of_nvmem_cell_get(np, NULL); > + if (IS_ERR(pvs_nvmem)) { > + dev_err(cpu_dev, "Could not get nvmem cell\n"); > + ret = PTR_ERR(pvs_nvmem); > + goto free_np; > + } > + > + ret = qcom_cpufreq_populate_opps(pvs_nvmem, tbl); > + if (ret) > + goto free_opp_name; > + > + pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); > + if (IS_ERR(pdev)) { > + ret = PTR_ERR(pdev); > + goto free_opp_name; > + } > + > + of_node_put(np); > + > + return 0; > + > +free_opp_name: > + while (tbl[cpu]) { > + dev_pm_opp_put_prop_name(tbl[cpu]); > + cpu++; > + } > + > +free_np: > + of_node_put(np); > + > + return ret; > +} > +late_initcall(qcom_cpufreq_driver_init); > + > +MODULE_DESCRIPTION("Qualcomm CPUfreq driver"); > +MODULE_AUTHOR("Stephen Boyd <sboyd@codeaurora.org>"); > +MODULE_LICENSE("GPL v2"); Everything else is fine. Fix above issue and you can add Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Hi Viresh, On 2/26/2018 3:34 PM, Viresh Kumar wrote: > On 26-02-18, 15:23, Sricharan R wrote: >> From: Stephen Boyd <sboyd@codeaurora.org> > > Is this email id still valid ? > Yes. codeaurora id should exist. >> +static int __init qcom_cpufreq_populate_opps(struct nvmem_cell *pvs_nvmem, >> + struct opp_table **tbl) >> +{ >> + int speed = 0, pvs = 0, pvs_ver = 0, cpu; >> + struct device *cpu_dev; >> + u8 *buf; >> + size_t len; >> + char pvs_name[] = "speedXX-pvsXX-vXX"; >> + >> + buf = nvmem_cell_read(pvs_nvmem, &len); >> + if (len == 4) >> + get_krait_bin_format_a(&speed, &pvs, &pvs_ver, pvs_nvmem, buf); >> + else if (len == 8) >> + get_krait_bin_format_b(&speed, &pvs, &pvs_ver, pvs_nvmem, buf); >> + else >> + pr_warn("Unable to read nvmem data. Defaulting to 0!\n"); >> + >> + snprintf(pvs_name, sizeof(pvs_name), "speed%d-pvs%d-v%d", >> + speed, pvs, pvs_ver); >> + >> + for (cpu = 0; cpu < num_possible_cpus(); cpu++) { >> + cpu_dev = get_cpu_device(cpu); >> + if (!cpu_dev) >> + return -ENODEV; >> + >> + tbl[cpu] = dev_pm_opp_set_prop_name(cpu_dev, pvs_name); >> + >> + if (IS_ERR(tbl[cpu])) { >> + tbl[cpu] = 0; >> + pr_warn("failed to add OPP name %s\n", pvs_name); >> + return PTR_ERR(tbl[cpu]); > > You just set tbl[cpu] to 0 :) > my bad. will fix it. >> + } >> + } >> + >> + return 0; >> +} >> + >> +static int __init qcom_cpufreq_driver_init(void) >> +{ >> + struct platform_device *pdev; >> + struct device *cpu_dev; >> + struct device_node *np; >> + struct nvmem_cell *pvs_nvmem; >> + struct opp_table *tbl[NR_CPUS] = { NULL }; >> + int ret, cpu = 0; >> + >> + cpu_dev = get_cpu_device(0); >> + if (!cpu_dev) >> + return -ENODEV; >> + >> + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); >> + if (!np) >> + return -ENOENT; >> + >> + if (!of_device_is_compatible(np, "operating-points-v2-krait-cpu")) { >> + ret = -ENOENT; >> + goto free_np; >> + } >> + >> + pvs_nvmem = of_nvmem_cell_get(np, NULL); >> + if (IS_ERR(pvs_nvmem)) { >> + dev_err(cpu_dev, "Could not get nvmem cell\n"); >> + ret = PTR_ERR(pvs_nvmem); >> + goto free_np; >> + } >> + >> + ret = qcom_cpufreq_populate_opps(pvs_nvmem, tbl); >> + if (ret) >> + goto free_opp_name; >> + >> + pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); >> + if (IS_ERR(pdev)) { >> + ret = PTR_ERR(pdev); >> + goto free_opp_name; >> + } >> + >> + of_node_put(np); >> + >> + return 0; >> + >> +free_opp_name: >> + while (tbl[cpu]) { >> + dev_pm_opp_put_prop_name(tbl[cpu]); >> + cpu++; >> + } >> + >> +free_np: >> + of_node_put(np); >> + >> + return ret; >> +} >> +late_initcall(qcom_cpufreq_driver_init); >> + >> +MODULE_DESCRIPTION("Qualcomm CPUfreq driver"); >> +MODULE_AUTHOR("Stephen Boyd <sboyd@codeaurora.org>"); >> +MODULE_LICENSE("GPL v2"); > > Everything else is fine. Fix above issue and you can add > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > Thanks. Will fix and repost. Regards, Sricharan
Quoting Sricharan R (2018-02-26 02:15:59) > Hi Viresh, > > On 2/26/2018 3:34 PM, Viresh Kumar wrote: > > On 26-02-18, 15:23, Sricharan R wrote: > >> From: Stephen Boyd <sboyd@codeaurora.org> > > > > Is this email id still valid ? > > > > Yes. codeaurora id should exist. > Yes it exists and I am checking it.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 3a88e33..826f9e7 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -133,6 +133,16 @@ config ARM_OMAP2PLUS_CPUFREQ depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS +config ARM_QCOM_CPUFREQ + bool "CPUfreq driver for the QCOM SoCs with KRAIT processors" + depends on ARCH_QCOM + select PM_OPP + help + This enables the CPUFreq driver for Qualcomm SoCs with + KRAIT processors. + + If in doubt, say N. + config ARM_S3C_CPUFREQ bool help diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index c60c1e1..21894f6 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -65,6 +65,9 @@ obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 3b585e4..e2e9a99 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -127,6 +127,11 @@ { .compatible = "ti,am43", }, { .compatible = "ti,dra7", }, + { .compatible = "qcom,ipq8064", }, + { .compatible = "qcom,apq8064", }, + { .compatible = "qcom,msm8974", }, + { .compatible = "qcom,msm8960", }, + { } }; diff --git a/drivers/cpufreq/qcom-cpufreq.c b/drivers/cpufreq/qcom-cpufreq.c new file mode 100644 index 0000000..20d9fa8 --- /dev/null +++ b/drivers/cpufreq/qcom-cpufreq.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include <linux/cpu.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> + +static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver, + struct nvmem_cell *pvs_nvmem, u8 *buf) +{ + u32 pte_efuse; + + pte_efuse = *((u32 *)buf); + + *speed = pte_efuse & 0xf; + if (*speed == 0xf) + *speed = (pte_efuse >> 4) & 0xf; + + if (*speed == 0xf) { + *speed = 0; + pr_warn("Speed bin: Defaulting to %d\n", *speed); + } else { + pr_info("Speed bin: %d\n", *speed); + } + + *pvs = (pte_efuse >> 10) & 0x7; + if (*pvs == 0x7) + *pvs = (pte_efuse >> 13) & 0x7; + + if (*pvs == 0x7) { + *pvs = 0; + pr_warn("PVS bin: Defaulting to %d\n", *pvs); + } else { + pr_info("PVS bin: %d\n", *pvs); + } + + kfree(buf); +} + +static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver, + struct nvmem_cell *pvs_nvmem, u8 *buf) +{ + u32 pte_efuse, redundant_sel; + + pte_efuse = *((u32 *)buf); + redundant_sel = (pte_efuse >> 24) & 0x7; + *speed = pte_efuse & 0x7; + + /* 4 bits of PVS are in efuse register bits 31, 8-6. */ + *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); + *pvs_ver = (pte_efuse >> 4) & 0x3; + + switch (redundant_sel) { + case 1: + *speed = (pte_efuse >> 27) & 0xf; + break; + case 2: + *pvs = (pte_efuse >> 27) & 0xf; + break; + } + + /* Check SPEED_BIN_BLOW_STATUS */ + if (pte_efuse & BIT(3)) { + pr_info("Speed bin: %d\n", *speed); + } else { + pr_warn("Speed bin not set. Defaulting to 0!\n"); + *speed = 0; + } + + /* Check PVS_BLOW_STATUS */ + pte_efuse = *(((u32 *)buf) + 4); + if (pte_efuse) { + pr_info("PVS bin: %d\n", *pvs); + } else { + pr_warn("PVS bin not set. Defaulting to 0!\n"); + *pvs = 0; + } + + pr_info("PVS version: %d\n", *pvs_ver); + kfree(buf); +} + +static int __init qcom_cpufreq_populate_opps(struct nvmem_cell *pvs_nvmem, + struct opp_table **tbl) +{ + int speed = 0, pvs = 0, pvs_ver = 0, cpu; + struct device *cpu_dev; + u8 *buf; + size_t len; + char pvs_name[] = "speedXX-pvsXX-vXX"; + + buf = nvmem_cell_read(pvs_nvmem, &len); + if (len == 4) + get_krait_bin_format_a(&speed, &pvs, &pvs_ver, pvs_nvmem, buf); + else if (len == 8) + get_krait_bin_format_b(&speed, &pvs, &pvs_ver, pvs_nvmem, buf); + else + pr_warn("Unable to read nvmem data. Defaulting to 0!\n"); + + snprintf(pvs_name, sizeof(pvs_name), "speed%d-pvs%d-v%d", + speed, pvs, pvs_ver); + + for (cpu = 0; cpu < num_possible_cpus(); cpu++) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) + return -ENODEV; + + tbl[cpu] = dev_pm_opp_set_prop_name(cpu_dev, pvs_name); + + if (IS_ERR(tbl[cpu])) { + tbl[cpu] = 0; + pr_warn("failed to add OPP name %s\n", pvs_name); + return PTR_ERR(tbl[cpu]); + } + } + + return 0; +} + +static int __init qcom_cpufreq_driver_init(void) +{ + struct platform_device *pdev; + struct device *cpu_dev; + struct device_node *np; + struct nvmem_cell *pvs_nvmem; + struct opp_table *tbl[NR_CPUS] = { NULL }; + int ret, cpu = 0; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!np) + return -ENOENT; + + if (!of_device_is_compatible(np, "operating-points-v2-krait-cpu")) { + ret = -ENOENT; + goto free_np; + } + + pvs_nvmem = of_nvmem_cell_get(np, NULL); + if (IS_ERR(pvs_nvmem)) { + dev_err(cpu_dev, "Could not get nvmem cell\n"); + ret = PTR_ERR(pvs_nvmem); + goto free_np; + } + + ret = qcom_cpufreq_populate_opps(pvs_nvmem, tbl); + if (ret) + goto free_opp_name; + + pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto free_opp_name; + } + + of_node_put(np); + + return 0; + +free_opp_name: + while (tbl[cpu]) { + dev_pm_opp_put_prop_name(tbl[cpu]); + cpu++; + } + +free_np: + of_node_put(np); + + return ret; +} +late_initcall(qcom_cpufreq_driver_init); + +MODULE_DESCRIPTION("Qualcomm CPUfreq driver"); +MODULE_AUTHOR("Stephen Boyd <sboyd@codeaurora.org>"); +MODULE_LICENSE("GPL v2");