| Message ID | 1518616792-29028-2-git-send-email-ilialin@codeaurora.org (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
Quoting Ilia Lin (2018-02-14 05:59:43) > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > index fbedbd8..78a103b 100644 > --- a/arch/arm64/Kconfig.platforms > +++ b/arch/arm64/Kconfig.platforms > @@ -145,6 +145,13 @@ config ARCH_REALTEK > This enables support for the ARMv8 based Realtek chipsets, > like the RTD1295. > > +config ARCH_MSM8996 > + bool "Enable Support for Qualcomm Technologies, Inc. MSM8996" > + depends on ARCH_QCOM Is this really the proposed approach? Doesn't the PMU code use these accessors? I would think the accessors are compiled if ARCH_QCOM=y so that the PMU stuff keeps working. Drop this Kconfig addition? > + help > + This enables support for the MSM8996 chipset. If you do not > + wish to build a kernel that runs on this chipset, say 'N' here. > + > config ARCH_ROCKCHIP > bool "Rockchip Platforms" > select ARCH_HAS_RESET_CONTROLLER > diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c > index 4fdc848..8cece9e 100644 > --- a/drivers/perf/qcom_l2_pmu.c > +++ b/drivers/perf/qcom_l2_pmu.c > @@ -1,4 +1,4 @@ > -/* Copyright (c) 2015-2017 The Linux Foundation. All rights reserved. > +/* Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. Sorry, this makes little sense. First off, code is only being deleted and more than half the file isn't being modified so why update copyright dates? > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 and > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > index dcebf28..4e91e2a 100644 > --- a/drivers/soc/qcom/Makefile > +++ b/drivers/soc/qcom/Makefile > @@ -12,3 +12,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o > obj-$(CONFIG_QCOM_SMP2P) += smp2p.o > obj-$(CONFIG_QCOM_SMSM) += smsm.o > obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o > +obj-$(CONFIG_ARCH_MSM8996) += kryo-l2-accessors.o > diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c > new file mode 100644 > index 0000000..6743848 > --- /dev/null > +++ b/drivers/soc/qcom/kryo-l2-accessors.c > @@ -0,0 +1,64 @@ > +/* > + * Copyright (c) 2014-2015, 2018, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ SPDX tags? > diff --git a/include/soc/qcom/kryo-l2-accessors.h b/include/soc/qcom/kryo-l2-accessors.h > new file mode 100644 > index 0000000..e9a5eab > --- /dev/null > +++ b/include/soc/qcom/kryo-l2-accessors.h > @@ -0,0 +1,22 @@ > +/* > + * Copyright (c) 2018, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#ifndef __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H > +#define __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H Maybe change this tO __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H > + > +#ifdef CONFIG_ARCH_QCOM > +void set_l2_indirect_reg(u64 reg_addr, u64 val); > +u64 get_l2_indirect_reg(u64 reg_addr); > +#endif This ifdef isn't doing much. Drop it? Or provide the inline nop alternatives. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> -----Original Message----- > From: Stephen Boyd <sboyd@kernel.org> > Sent: Monday, March 19, 2018 19:45 > To: Ilia Lin <ilialin@codeaurora.org>; linux-arm-kernel@lists.infradead.org; > linux-arm-msm@vger.kernel.org; linux-clk@vger.kernel.org; > sboyd@codeaurora.org > Cc: mark.rutland@arm.com; devicetree@vger.kernel.org; > rnayak@codeaurora.org; robh@kernel.org; will.deacon@arm.com; > amit.kucheria@linaro.org; tfinkel@codeaurora.org; ilialin@codeaurora.org; > nicolas.dechesne@linaro.org; celster@codeaurora.org > Subject: Re: [PATCH v3 01/10] soc: qcom: Separate kryo l2 accessors from > PMU driver > > Quoting Ilia Lin (2018-02-14 05:59:43) > > diff --git a/arch/arm64/Kconfig.platforms > > b/arch/arm64/Kconfig.platforms index fbedbd8..78a103b 100644 > > --- a/arch/arm64/Kconfig.platforms > > +++ b/arch/arm64/Kconfig.platforms > > @@ -145,6 +145,13 @@ config ARCH_REALTEK > > This enables support for the ARMv8 based Realtek chipsets, > > like the RTD1295. > > > > +config ARCH_MSM8996 > > + bool "Enable Support for Qualcomm Technologies, Inc. MSM8996" > > + depends on ARCH_QCOM > > Is this really the proposed approach? Doesn't the PMU code use these > accessors? I would think the accessors are compiled if ARCH_QCOM=y so > that the PMU stuff keeps working. Drop this Kconfig addition? I'll check whether the kryo-accessors code is SOC specific or not. > > > + help > > + This enables support for the MSM8996 chipset. If you do not > > + wish to build a kernel that runs on this chipset, say 'N' here. > > + > > config ARCH_ROCKCHIP > > bool "Rockchip Platforms" > > select ARCH_HAS_RESET_CONTROLLER diff --git > > a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index > > 4fdc848..8cece9e 100644 > > --- a/drivers/perf/qcom_l2_pmu.c > > +++ b/drivers/perf/qcom_l2_pmu.c > > @@ -1,4 +1,4 @@ > > -/* Copyright (c) 2015-2017 The Linux Foundation. All rights reserved. > > +/* Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. > > Sorry, this makes little sense. First off, code is only being deleted and more > than half the file isn't being modified so why update copyright dates? Agree. Will roll back. > > > * > > * This program is free software; you can redistribute it and/or modify > > * it under the terms of the GNU General Public License version 2 and > > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > > index dcebf28..4e91e2a 100644 > > --- a/drivers/soc/qcom/Makefile > > +++ b/drivers/soc/qcom/Makefile > > @@ -12,3 +12,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += > smem_state.o > > obj-$(CONFIG_QCOM_SMP2P) += smp2p.o > > obj-$(CONFIG_QCOM_SMSM) += smsm.o > > obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o > > +obj-$(CONFIG_ARCH_MSM8996) += kryo-l2-accessors.o > > diff --git a/drivers/soc/qcom/kryo-l2-accessors.c > > b/drivers/soc/qcom/kryo-l2-accessors.c > > new file mode 100644 > > index 0000000..6743848 > > --- /dev/null > > +++ b/drivers/soc/qcom/kryo-l2-accessors.c > > @@ -0,0 +1,64 @@ > > +/* > > + * Copyright (c) 2014-2015, 2018, The Linux Foundation. All rights reserved. > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > SPDX tags? Will do. > > > diff --git a/include/soc/qcom/kryo-l2-accessors.h > > b/include/soc/qcom/kryo-l2-accessors.h > > new file mode 100644 > > index 0000000..e9a5eab > > --- /dev/null > > +++ b/include/soc/qcom/kryo-l2-accessors.h > > @@ -0,0 +1,22 @@ > > +/* > > + * Copyright (c) 2018, The Linux Foundation. All rights reserved. > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#ifndef __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H > > +#define __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H > > Maybe change this tO __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H No problem. Will change. > > > + > > +#ifdef CONFIG_ARCH_QCOM > > +void set_l2_indirect_reg(u64 reg_addr, u64 val); > > +u64 get_l2_indirect_reg(u64 reg_addr); #endif > > This ifdef isn't doing much. Drop it? Or provide the inline nop alternatives. Right. I'll drop it. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index fbedbd8..78a103b 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -145,6 +145,13 @@ config ARCH_REALTEK This enables support for the ARMv8 based Realtek chipsets, like the RTD1295. +config ARCH_MSM8996 + bool "Enable Support for Qualcomm Technologies, Inc. MSM8996" + depends on ARCH_QCOM + help + This enables support for the MSM8996 chipset. If you do not + wish to build a kernel that runs on this chipset, say 'N' here. + config ARCH_ROCKCHIP bool "Rockchip Platforms" select ARCH_HAS_RESET_CONTROLLER diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index 4fdc848..8cece9e 100644 --- a/drivers/perf/qcom_l2_pmu.c +++ b/drivers/perf/qcom_l2_pmu.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2015-2017 The Linux Foundation. All rights reserved. +/* Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -30,7 +30,7 @@ #include <asm/barrier.h> #include <asm/local64.h> -#include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> #define MAX_L2_CTRS 9 @@ -87,9 +87,6 @@ #define L2_COUNTER_RELOAD BIT_ULL(31) #define L2_CYCLE_COUNTER_RELOAD BIT_ULL(63) -#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) -#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) - #define reg_idx(reg, i) (((i) * IA_L2_REG_OFFSET) + reg##_BASE) /* @@ -107,49 +104,6 @@ #define L2_EVENT_STREX 0x421 #define L2_EVENT_CLREX 0x422 -static DEFINE_RAW_SPINLOCK(l2_access_lock); - -/** - * set_l2_indirect_reg: write value to an L2 register - * @reg: Address of L2 register. - * @value: Value to be written to register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static void set_l2_indirect_reg(u64 reg, u64 val) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - write_sysreg_s(val, L2CPUSRDR_EL1); - isb(); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); -} - -/** - * get_l2_indirect_reg: read an L2 register value - * @reg: Address of L2 register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static u64 get_l2_indirect_reg(u64 reg) -{ - u64 val; - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - val = read_sysreg_s(L2CPUSRDR_EL1); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); - - return val; -} - struct cluster_pmu; /* diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index dcebf28..4e91e2a 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o obj-$(CONFIG_QCOM_SMP2P) += smp2p.o obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o +obj-$(CONFIG_ARCH_MSM8996) += kryo-l2-accessors.o diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c new file mode 100644 index 0000000..6743848 --- /dev/null +++ b/drivers/soc/qcom/kryo-l2-accessors.c @@ -0,0 +1,64 @@ +/* + * Copyright (c) 2014-2015, 2018, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/spinlock.h> +#include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> + +#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) +#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) + +static DEFINE_RAW_SPINLOCK(l2_access_lock); + +/** + * set_l2_indirect_reg: write value to an L2 register + * @reg: Address of L2 register. + * @value: Value to be written to register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +void set_l2_indirect_reg(u64 reg, u64 val) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + write_sysreg_s(val, L2CPUSRDR_EL1); + isb(); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); +} +EXPORT_SYMBOL(set_l2_indirect_reg); + +/** + * get_l2_indirect_reg: read an L2 register value + * @reg: Address of L2 register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +u64 get_l2_indirect_reg(u64 reg) +{ + u64 val; + unsigned long flags; + + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + val = read_sysreg_s(L2CPUSRDR_EL1); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); + + return val; +} +EXPORT_SYMBOL(get_l2_indirect_reg); diff --git a/include/soc/qcom/kryo-l2-accessors.h b/include/soc/qcom/kryo-l2-accessors.h new file mode 100644 index 0000000..e9a5eab --- /dev/null +++ b/include/soc/qcom/kryo-l2-accessors.h @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H +#define __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H + +#ifdef CONFIG_ARCH_QCOM +void set_l2_indirect_reg(u64 reg_addr, u64 val); +u64 get_l2_indirect_reg(u64 reg_addr); +#endif + +#endif
The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> --- arch/arm64/Kconfig.platforms | 7 ++++ drivers/perf/qcom_l2_pmu.c | 50 ++-------------------------- drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/kryo-l2-accessors.c | 64 ++++++++++++++++++++++++++++++++++++ include/soc/qcom/kryo-l2-accessors.h | 22 +++++++++++++ 5 files changed, 96 insertions(+), 48 deletions(-) create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c create mode 100644 include/soc/qcom/kryo-l2-accessors.h