Message ID | 13513063.74pX3ZfeIS@sanji (mailing list archive) |
---|---|
State | Changes Requested, archived |
Delegated to: | Andy Shevchenko |
Headers | show |
On Sun, Apr 22, 2018 at 1:25 AM, Tristian Celestin <tristiancelestin@fastmail.com> wrote: Thanks for the patch. First of all, please, include all PDx86 maintainers to the discussion as well. Second, please, use `git send-email` tool to send patches, it avoids attachments. > I am running Fedora 28 and Android-x86 on a Dell Latitude 5175 tablet. The > power button functionality is driven by the intel-hid driver. I am using > kernel version 4.16. > > Currently, the intel-hid driver does not supply a KEY_POWER up event in cases > where the platform doesn't expose the 5-button array. Without this patch, the > power button can't reliably respond when the platform is running Android. > > When running Fedora, I can use the power button to suspend and resume the > tablet. I can initiate this suspend by short-pressing the power button for a > second, and can resume it using another short-press. > > When running Android-x86, I can only short-press the power button once. After > the press, the button seems to no longer respond. This is problematic when > using a short-press to initiate a suspend, since a subsequent short press will > not wake the tablet. > > I used getevent to display the KeyEvents[1] detected by Android, and a > combination of 'cat /proc/kmsg' and debug statements in the intel-hid driver > to display the events generated by the driver. I found the block in the intel- > hid driver that generates power button events for my device. On line 253 of > intel-hid.c: > > if (!priv->array) { > if (event == 0xce) { > input_report_key(priv->input_dev, KEY_POWER, 1); > input_sync(priv->input_dev); > return; > } > > if (event == 0xcf) > return; > } > > When I short-press the power button, intel-hid produces a KEY_POWER down > event, but doesn't produce a KEY_POWER up event when I release the power > button. Suppose intel-hid has been mapped to the input device /dev/input/ > event19. Then, on Android-x86, the command "getevent -lt" produces the > following output: > > /dev/input/event19: EV_KEY KEY_POWER DOWN > /dev/input/event19: EV_SYN SYN_REPORT 00000000 > > Subsequent presses produced no output for that input device. > > When I added a call to input_report_key(...) and input_sync(...) on the > KEY_POWER up event in the intel-hid driver, I could repeatedly short-press the > power button and have Android respond appropriately, including resuming the > device from suspend. My hunch as to why this is the case is that Android needs > a paired KEY_POWER DOWN and UP event before it will handle the press. WRT, patch contents: - please, do a proper commit message - while it has crucial semantic mistake (missing {}) it suddenly works because nothing behind the condition you had touched - I would rather unify conditionals, though I would like to hear from Alex and Dmitry if it's fine to do what you are trying to do in the patch
On Mon, Apr 23, 2018 at 7:36 AM, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > On Sun, Apr 22, 2018 at 1:25 AM, Tristian Celestin > <tristiancelestin@fastmail.com> wrote: > > Thanks for the patch. > > First of all, please, include all PDx86 maintainers to the discussion as well. > Second, please, use `git send-email` tool to send patches, it avoids > attachments. > >> I am running Fedora 28 and Android-x86 on a Dell Latitude 5175 tablet. The >> power button functionality is driven by the intel-hid driver. I am using >> kernel version 4.16. >> >> Currently, the intel-hid driver does not supply a KEY_POWER up event in cases >> where the platform doesn't expose the 5-button array. Without this patch, the >> power button can't reliably respond when the platform is running Android. >> >> When running Fedora, I can use the power button to suspend and resume the >> tablet. I can initiate this suspend by short-pressing the power button for a >> second, and can resume it using another short-press. >> >> When running Android-x86, I can only short-press the power button once. After >> the press, the button seems to no longer respond. This is problematic when >> using a short-press to initiate a suspend, since a subsequent short press will >> not wake the tablet. >> >> I used getevent to display the KeyEvents[1] detected by Android, and a >> combination of 'cat /proc/kmsg' and debug statements in the intel-hid driver >> to display the events generated by the driver. I found the block in the intel- >> hid driver that generates power button events for my device. On line 253 of >> intel-hid.c: >> >> if (!priv->array) { >> if (event == 0xce) { >> input_report_key(priv->input_dev, KEY_POWER, 1); >> input_sync(priv->input_dev); >> return; >> } >> >> if (event == 0xcf) >> return; >> } Thanks for the work. This somehow sounds similar to Wacom MobileStudio Pro that we worked on before. A quirk was added to enable 5 button array, and the commit is c454a99d4ce1cebb. Could you please try to add a DMI entry in button_array_table[] and verify the power button again? If this works, we can use the DMI quirk instead. >> >> When I short-press the power button, intel-hid produces a KEY_POWER down >> event, but doesn't produce a KEY_POWER up event when I release the power >> button. Suppose intel-hid has been mapped to the input device /dev/input/ >> event19. Then, on Android-x86, the command "getevent -lt" produces the >> following output: >> >> /dev/input/event19: EV_KEY KEY_POWER DOWN >> /dev/input/event19: EV_SYN SYN_REPORT 00000000 >> >> Subsequent presses produced no output for that input device. >> >> When I added a call to input_report_key(...) and input_sync(...) on the >> KEY_POWER up event in the intel-hid driver, I could repeatedly short-press the >> power button and have Android respond appropriately, including resuming the >> device from suspend. My hunch as to why this is the case is that Android needs >> a paired KEY_POWER DOWN and UP event before it will handle the press. > > WRT, patch contents: > - please, do a proper commit message > - while it has crucial semantic mistake (missing {}) it suddenly works > because nothing behind the condition you had touched > - I would rather unify conditionals, though I would like to hear from > Alex and Dmitry if it's fine to do what you are trying to do in the > patch > > -- > With Best Regards, > Andy Shevchenko
On Mon, Apr 23, 2018, at 8:55 PM, Alex Hung wrote: > On Mon, Apr 23, 2018 at 7:36 AM, Andy Shevchenko > <andy.shevchenko@gmail.com> wrote: >> On Sun, Apr 22, 2018 at 1:25 AM, Tristian Celestin >> <tristiancelestin@fastmail.com> wrote: >> >> Thanks for the patch. >> >> First of all, please, include all PDx86 maintainers to the discussion as well. >> Second, please, use `git send-email` tool to send patches, it avoids >> attachments. Thank you for the guidance. Will do. >>> I am running Fedora 28 and Android-x86 on a Dell Latitude 5175 tablet. The >>> power button functionality is driven by the intel-hid driver. I am using >>> kernel version 4.16. >>> >>> Currently, the intel-hid driver does not supply a KEY_POWER up event in cases >>> where the platform doesn't expose the 5-button array. Without this patch, the >>> power button can't reliably respond when the platform is running Android. >>> >>> When running Fedora, I can use the power button to suspend and resume the >>> tablet. I can initiate this suspend by short-pressing the power button for a >>> second, and can resume it using another short-press. >>> >>> When running Android-x86, I can only short-press the power button once. After >>> the press, the button seems to no longer respond. This is problematic when >>> using a short-press to initiate a suspend, since a subsequent short press will >>> not wake the tablet. >>> >>> I used getevent to display the KeyEvents[1] detected by Android, and a >>> combination of 'cat /proc/kmsg' and debug statements in the intel-hid driver >>> to display the events generated by the driver. I found the block in the intel- >>> hid driver that generates power button events for my device. On line 253 of >>> intel-hid.c: >>> >>> if (!priv->array) { >>> if (event == 0xce) { >>> input_report_key(priv->input_dev, KEY_POWER, 1); >>> input_sync(priv->input_dev); >>> return; >>> } >>> >>> if (event == 0xcf) >>> return; >>> } > > Thanks for the work. This somehow sounds similar to Wacom MobileStudio > Pro that we worked on before. A quirk was added to enable 5 button > array, and the commit is c454a99d4ce1cebb. > > Could you please try to add a DMI entry in button_array_table[] and > verify the power button again? If this works, we can use the DMI quirk > instead. Thank you for the guidance. I added a DMI entry to button_array_table[] for the Latitude 5175, and the tablet now also responds to short presses while suspended. >>> >>> When I short-press the power button, intel-hid produces a KEY_POWER down >>> event, but doesn't produce a KEY_POWER up event when I release the power >>> button. Suppose intel-hid has been mapped to the input device /dev/input/ >>> event19. Then, on Android-x86, the command "getevent -lt" produces the >>> following output: >>> >>> /dev/input/event19: EV_KEY KEY_POWER DOWN >>> /dev/input/event19: EV_SYN SYN_REPORT 00000000 >>> >>> Subsequent presses produced no output for that input device. >>> >>> When I added a call to input_report_key(...) and input_sync(...) on the >>> KEY_POWER up event in the intel-hid driver, I could repeatedly short-press the >>> power button and have Android respond appropriately, including resuming the >>> device from suspend. My hunch as to why this is the case is that Android needs >>> a paired KEY_POWER DOWN and UP event before it will handle the press. >> >> WRT, patch contents: >> - please, do a proper commit message >> - while it has crucial semantic mistake (missing {}) it suddenly works >> because nothing behind the condition you had touched >> - I would rather unify conditionals, though I would like to hear from >> Alex and Dmitry if it's fine to do what you are trying to do in the >> patch >> >> -- >> With Best Regards, >> Andy Shevchenko > > > > -- > Cheers, > Alex Hung
I have a patch ready, but I don't know the underlying cause of the problem, and this is preventing from writing a meaningful commit message. On Sun, Apr 29, 2018, at 8:45 PM, Tristian Celestin wrote: > > > > On Mon, Apr 23, 2018, at 8:55 PM, Alex Hung wrote: >> On Mon, Apr 23, 2018 at 7:36 AM, Andy Shevchenko >> <andy.shevchenko@gmail.com> wrote: >>> On Sun, Apr 22, 2018 at 1:25 AM, Tristian Celestin >>> <tristiancelestin@fastmail.com> wrote: >>> >>> Thanks for the patch. >>> >>> First of all, please, include all PDx86 maintainers to the discussion as well. >>> Second, please, use `git send-email` tool to send patches, it avoids >>> attachments. > > Thank you for the guidance. Will do. > >>>> I am running Fedora 28 and Android-x86 on a Dell Latitude 5175 tablet. The >>>> power button functionality is driven by the intel-hid driver. I am using >>>> kernel version 4.16. >>>> >>>> Currently, the intel-hid driver does not supply a KEY_POWER up event in cases >>>> where the platform doesn't expose the 5-button array. Without this patch, the >>>> power button can't reliably respond when the platform is running Android. >>>> >>>> When running Fedora, I can use the power button to suspend and resume the >>>> tablet. I can initiate this suspend by short-pressing the power button for a >>>> second, and can resume it using another short-press. >>>> >>>> When running Android-x86, I can only short-press the power button once. After >>>> the press, the button seems to no longer respond. This is problematic when >>>> using a short-press to initiate a suspend, since a subsequent short press will >>>> not wake the tablet. >>>> >>>> I used getevent to display the KeyEvents[1] detected by Android, and a >>>> combination of 'cat /proc/kmsg' and debug statements in the intel-hid driver >>>> to display the events generated by the driver. I found the block in the intel- >>>> hid driver that generates power button events for my device. On line 253 of >>>> intel-hid.c: >>>> >>>> if (!priv->array) { >>>> if (event == 0xce) { >>>> input_report_key(priv->input_dev, KEY_POWER, 1); >>>> input_sync(priv->input_dev); >>>> return; >>>> } >>>> >>>> if (event == 0xcf) >>>> return; >>>> } >> >> Thanks for the work. This somehow sounds similar to Wacom MobileStudio >> Pro that we worked on before. A quirk was added to enable 5 button >> array, and the commit is c454a99d4ce1cebb. >> >> Could you please try to add a DMI entry in button_array_table[] and >> verify the power button again? If this works, we can use the DMI quirk >> instead. > > Thank you for the guidance. I added a DMI entry to button_array_table[] for the Latitude 5175, and the > tablet now also responds to short presses while suspended. > >>>> >>>> When I short-press the power button, intel-hid produces a KEY_POWER down >>>> event, but doesn't produce a KEY_POWER up event when I release the power >>>> button. Suppose intel-hid has been mapped to the input device /dev/input/ >>>> event19. Then, on Android-x86, the command "getevent -lt" produces the >>>> following output: >>>> >>>> /dev/input/event19: EV_KEY KEY_POWER DOWN >>>> /dev/input/event19: EV_SYN SYN_REPORT 00000000 >>>> >>>> Subsequent presses produced no output for that input device. >>>> >>>> When I added a call to input_report_key(...) and input_sync(...) on the >>>> KEY_POWER up event in the intel-hid driver, I could repeatedly short-press the >>>> power button and have Android respond appropriately, including resuming the >>>> device from suspend. My hunch as to why this is the case is that Android needs >>>> a paired KEY_POWER DOWN and UP event before it will handle the press. >>> >>> WRT, patch contents: >>> - please, do a proper commit message >>> - while it has crucial semantic mistake (missing {}) it suddenly works >>> because nothing behind the condition you had touched >>> - I would rather unify conditionals, though I would like to hear from >>> Alex and Dmitry if it's fine to do what you are trying to do in the >>> patch >>> >>> -- >>> With Best Regards, >>> Andy Shevchenko >> >> >> >> -- >> Cheers, >> Alex Hung
On Sun, Apr 29, 2018 at 9:35 PM, Tristian Celestin <tristiancelestin@fastmail.com> wrote: > I have a patch ready, but I don't know the underlying cause of the problem, and this is preventing from writing a meaningful commit message. According to my understanding, the original intel-hid spec supported 0xC0 notification and events are reported by HDEM method, and an update of "5 button array" added other notification numbers such as 0xce for power button; however, some BIOS failed to report 5 button array is supported via HEBC method, and the DMI quirk was a workaround to always enable 5 button array. I personally think a commit message similar to c454a99d4ce1cebb is good enough, but Andy or Darren will provide more feedbacks if they think a refinement is necessary. > > > On Sun, Apr 29, 2018, at 8:45 PM, Tristian Celestin wrote: >> >> >> >> On Mon, Apr 23, 2018, at 8:55 PM, Alex Hung wrote: >>> On Mon, Apr 23, 2018 at 7:36 AM, Andy Shevchenko >>> <andy.shevchenko@gmail.com> wrote: >>>> On Sun, Apr 22, 2018 at 1:25 AM, Tristian Celestin >>>> <tristiancelestin@fastmail.com> wrote: >>>> >>>> Thanks for the patch. >>>> >>>> First of all, please, include all PDx86 maintainers to the discussion as well. >>>> Second, please, use `git send-email` tool to send patches, it avoids >>>> attachments. >> >> Thank you for the guidance. Will do. >> >>>>> I am running Fedora 28 and Android-x86 on a Dell Latitude 5175 tablet. The >>>>> power button functionality is driven by the intel-hid driver. I am using >>>>> kernel version 4.16. >>>>> >>>>> Currently, the intel-hid driver does not supply a KEY_POWER up event in cases >>>>> where the platform doesn't expose the 5-button array. Without this patch, the >>>>> power button can't reliably respond when the platform is running Android. >>>>> >>>>> When running Fedora, I can use the power button to suspend and resume the >>>>> tablet. I can initiate this suspend by short-pressing the power button for a >>>>> second, and can resume it using another short-press. >>>>> >>>>> When running Android-x86, I can only short-press the power button once. After >>>>> the press, the button seems to no longer respond. This is problematic when >>>>> using a short-press to initiate a suspend, since a subsequent short press will >>>>> not wake the tablet. >>>>> >>>>> I used getevent to display the KeyEvents[1] detected by Android, and a >>>>> combination of 'cat /proc/kmsg' and debug statements in the intel-hid driver >>>>> to display the events generated by the driver. I found the block in the intel- >>>>> hid driver that generates power button events for my device. On line 253 of >>>>> intel-hid.c: >>>>> >>>>> if (!priv->array) { >>>>> if (event == 0xce) { >>>>> input_report_key(priv->input_dev, KEY_POWER, 1); >>>>> input_sync(priv->input_dev); >>>>> return; >>>>> } >>>>> >>>>> if (event == 0xcf) >>>>> return; >>>>> } >>> >>> Thanks for the work. This somehow sounds similar to Wacom MobileStudio >>> Pro that we worked on before. A quirk was added to enable 5 button >>> array, and the commit is c454a99d4ce1cebb. >>> >>> Could you please try to add a DMI entry in button_array_table[] and >>> verify the power button again? If this works, we can use the DMI quirk >>> instead. >> >> Thank you for the guidance. I added a DMI entry to button_array_table[] for the Latitude 5175, and the >> tablet now also responds to short presses while suspended. >> >>>>> >>>>> When I short-press the power button, intel-hid produces a KEY_POWER down >>>>> event, but doesn't produce a KEY_POWER up event when I release the power >>>>> button. Suppose intel-hid has been mapped to the input device /dev/input/ >>>>> event19. Then, on Android-x86, the command "getevent -lt" produces the >>>>> following output: >>>>> >>>>> /dev/input/event19: EV_KEY KEY_POWER DOWN >>>>> /dev/input/event19: EV_SYN SYN_REPORT 00000000 >>>>> >>>>> Subsequent presses produced no output for that input device. >>>>> >>>>> When I added a call to input_report_key(...) and input_sync(...) on the >>>>> KEY_POWER up event in the intel-hid driver, I could repeatedly short-press the >>>>> power button and have Android respond appropriately, including resuming the >>>>> device from suspend. My hunch as to why this is the case is that Android needs >>>>> a paired KEY_POWER DOWN and UP event before it will handle the press. >>>> >>>> WRT, patch contents: >>>> - please, do a proper commit message >>>> - while it has crucial semantic mistake (missing {}) it suddenly works >>>> because nothing behind the condition you had touched >>>> - I would rather unify conditionals, though I would like to hear from >>>> Alex and Dmitry if it's fine to do what you are trying to do in the >>>> patch >>>> >>>> -- >>>> With Best Regards, >>>> Andy Shevchenko >>> >>> >>> >>> -- >>> Cheers, >>> Alex Hung
On Mon, Apr 30, 2018 at 8:20 AM Alex Hung <alex.hung@canonical.com> wrote: > > On Sun, Apr 29, 2018 at 9:35 PM, Tristian Celestin > <tristiancelestin@fastmail.com> wrote: > > I have a patch ready, but I don't know the underlying cause of the problem, and this is preventing from writing a meaningful commit message. > > According to my understanding, the original intel-hid spec supported > 0xC0 notification and events are reported by HDEM method, and an > update of "5 button array" added other notification numbers such as > 0xce for power button; however, some BIOS failed to report 5 button > array is supported via HEBC method, and the DMI quirk was a workaround > to always enable 5 button array. > > I personally think a commit message similar to c454a99d4ce1cebb is > good enough, but Andy or Darren will provide more feedbacks if they > think a refinement is necessary. > This is still in the patchwork queue by some reason. Can you elaborate if this needed or not? If so, would it be anticipated a new version? > > > > > > On Sun, Apr 29, 2018, at 8:45 PM, Tristian Celestin wrote: > >> > >> > >> > >> On Mon, Apr 23, 2018, at 8:55 PM, Alex Hung wrote: > >>> On Mon, Apr 23, 2018 at 7:36 AM, Andy Shevchenko > >>> <andy.shevchenko@gmail.com> wrote: > >>>> On Sun, Apr 22, 2018 at 1:25 AM, Tristian Celestin > >>>> <tristiancelestin@fastmail.com> wrote: > >>>> > >>>> Thanks for the patch. > >>>> > >>>> First of all, please, include all PDx86 maintainers to the discussion as well. > >>>> Second, please, use `git send-email` tool to send patches, it avoids > >>>> attachments. > >> > >> Thank you for the guidance. Will do. > >> > >>>>> I am running Fedora 28 and Android-x86 on a Dell Latitude 5175 tablet. The > >>>>> power button functionality is driven by the intel-hid driver. I am using > >>>>> kernel version 4.16. > >>>>> > >>>>> Currently, the intel-hid driver does not supply a KEY_POWER up event in cases > >>>>> where the platform doesn't expose the 5-button array. Without this patch, the > >>>>> power button can't reliably respond when the platform is running Android. > >>>>> > >>>>> When running Fedora, I can use the power button to suspend and resume the > >>>>> tablet. I can initiate this suspend by short-pressing the power button for a > >>>>> second, and can resume it using another short-press. > >>>>> > >>>>> When running Android-x86, I can only short-press the power button once. After > >>>>> the press, the button seems to no longer respond. This is problematic when > >>>>> using a short-press to initiate a suspend, since a subsequent short press will > >>>>> not wake the tablet. > >>>>> > >>>>> I used getevent to display the KeyEvents[1] detected by Android, and a > >>>>> combination of 'cat /proc/kmsg' and debug statements in the intel-hid driver > >>>>> to display the events generated by the driver. I found the block in the intel- > >>>>> hid driver that generates power button events for my device. On line 253 of > >>>>> intel-hid.c: > >>>>> > >>>>> if (!priv->array) { > >>>>> if (event == 0xce) { > >>>>> input_report_key(priv->input_dev, KEY_POWER, 1); > >>>>> input_sync(priv->input_dev); > >>>>> return; > >>>>> } > >>>>> > >>>>> if (event == 0xcf) > >>>>> return; > >>>>> } > >>> > >>> Thanks for the work. This somehow sounds similar to Wacom MobileStudio > >>> Pro that we worked on before. A quirk was added to enable 5 button > >>> array, and the commit is c454a99d4ce1cebb. > >>> > >>> Could you please try to add a DMI entry in button_array_table[] and > >>> verify the power button again? If this works, we can use the DMI quirk > >>> instead. > >> > >> Thank you for the guidance. I added a DMI entry to button_array_table[] for the Latitude 5175, and the > >> tablet now also responds to short presses while suspended. > >> > >>>>> > >>>>> When I short-press the power button, intel-hid produces a KEY_POWER down > >>>>> event, but doesn't produce a KEY_POWER up event when I release the power > >>>>> button. Suppose intel-hid has been mapped to the input device /dev/input/ > >>>>> event19. Then, on Android-x86, the command "getevent -lt" produces the > >>>>> following output: > >>>>> > >>>>> /dev/input/event19: EV_KEY KEY_POWER DOWN > >>>>> /dev/input/event19: EV_SYN SYN_REPORT 00000000 > >>>>> > >>>>> Subsequent presses produced no output for that input device. > >>>>> > >>>>> When I added a call to input_report_key(...) and input_sync(...) on the > >>>>> KEY_POWER up event in the intel-hid driver, I could repeatedly short-press the > >>>>> power button and have Android respond appropriately, including resuming the > >>>>> device from suspend. My hunch as to why this is the case is that Android needs > >>>>> a paired KEY_POWER DOWN and UP event before it will handle the press. > >>>> > >>>> WRT, patch contents: > >>>> - please, do a proper commit message > >>>> - while it has crucial semantic mistake (missing {}) it suddenly works > >>>> because nothing behind the condition you had touched > >>>> - I would rather unify conditionals, though I would like to hear from > >>>> Alex and Dmitry if it's fine to do what you are trying to do in the > >>>> patch > >>>> > >>>> -- > >>>> With Best Regards, > >>>> Andy Shevchenko > >>> > >>> > >>> > >>> -- > >>> Cheers, > >>> Alex Hung > > > > -- > Cheers, > Alex Hung
On Tue, Jun 11, 2019 at 10:00:35PM +0300, Andy Shevchenko wrote: > On Mon, Apr 30, 2018 at 8:20 AM Alex Hung <alex.hung@canonical.com> wrote: > > > > On Sun, Apr 29, 2018 at 9:35 PM, Tristian Celestin > > <tristiancelestin@fastmail.com> wrote: > > > I have a patch ready, but I don't know the underlying cause of the problem, and this is preventing from writing a meaningful commit message. > > > > According to my understanding, the original intel-hid spec supported > > 0xC0 notification and events are reported by HDEM method, and an > > update of "5 button array" added other notification numbers such as > > 0xce for power button; however, some BIOS failed to report 5 button > > array is supported via HEBC method, and the DMI quirk was a workaround > > to always enable 5 button array. > > > > I personally think a commit message similar to c454a99d4ce1cebb is > > good enough, but Andy or Darren will provide more feedbacks if they > > think a refinement is necessary. > > > > This is still in the patchwork queue by some reason. > Can you elaborate if this needed or not? If so, would it be > anticipated a new version? Looks another copy of the patch was merged: commit e97a34563d18606ee5db93e495382a967f999cd4 Author: Jérôme de Bretagne <jerome.debretagne@gmail.com> Date: Sun Jan 6 18:56:44 2019 +0100 platform/x86: intel-hid: Missing power button release on some Dell models Thanks.
On Wed, Jun 12, 2019 at 3:49 AM Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > On Tue, Jun 11, 2019 at 10:00:35PM +0300, Andy Shevchenko wrote: > > On Mon, Apr 30, 2018 at 8:20 AM Alex Hung <alex.hung@canonical.com> wrote: > > This is still in the patchwork queue by some reason. > > Can you elaborate if this needed or not? If so, would it be > > anticipated a new version? > > Looks another copy of the patch was merged: > > commit e97a34563d18606ee5db93e495382a967f999cd4 > Author: Jérôme de Bretagne <jerome.debretagne@gmail.com> > Date: Sun Jan 6 18:56:44 2019 +0100 > > platform/x86: intel-hid: Missing power button release on some Dell models Thanks! I will mark old one correspondently.
From 13f7f1cd9dfb71275f41dc598b17a92503fb991c Mon Sep 17 00:00:00 2001 From: Tristian Celestin <tristian.celestin@outlook.com> Date: Tue, 10 Apr 2018 00:52:53 -0400 Subject: [PATCH] Make power-button key report the button-up event when the 5-button array does not exist. --- drivers/platform/x86/intel-hid.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index 5e3df19..170ad950 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -260,6 +260,8 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) } if (event == 0xcf) + input_report_key(priv->input_dev, KEY_POWER, 0); + input_sync(priv->input_dev); return; } -- 1.8.3.1