Message ID | 20180530071613.125768-2-keiichiw@chromium.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 05/30/2018 09:16 AM, Keiichi Watanabe wrote: > Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired > profile for VP9 encoder and querying for supported profiles by VP9 encoder > or decoder. > > An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be > used for querying since it is not a menu control but an integer > control, which cannot return an arbitrary set of supported profiles. > > The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as > with controls for other codec profiles. (e.g. H264) Please ignore my reply to patch 2/2. I looked at this a bit more and what you should do is to change the type of V4L2_CID_MPEG_VIDEO_VPX_PROFILE to enum. All other codec profile controls are all enums, so the fact that VPX_PROFILE isn't is a bug. Changing the type should not cause any problems since the same control value is used when you set the control. Sylwester: I see that s5p-mfc uses this control, but it is explicitly added as an integer type control, so the s5p-mfc driver should not be affected by changing the type of this control. Stanimir: this will slightly change the venus driver, but since it is a very recent driver I think we can get away with changing the core type of the VPX_PROFILE control. I think that's better than ending up with two controls that do the same thing. Regards, Hans > > Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> > --- > .../media/uapi/v4l/extended-controls.rst | 26 +++++++++++++++++++ > drivers/media/v4l2-core/v4l2-ctrls.c | 12 +++++++++ > include/uapi/linux/v4l2-controls.h | 8 ++++++ > 3 files changed, 46 insertions(+) > > diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst > index 03931f9b1285..4f7f128a4998 100644 > --- a/Documentation/media/uapi/v4l/extended-controls.rst > +++ b/Documentation/media/uapi/v4l/extended-controls.rst > @@ -1959,6 +1959,32 @@ enum v4l2_vp8_golden_frame_sel - > Select the desired profile for VPx encoder. Acceptable values are 0, > 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3. > > +.. _v4l2-mpeg-video-vp9-profile: > + > +``V4L2_CID_MPEG_VIDEO_VP9_PROFILE`` > + (enum) > + > +enum v4l2_mpeg_video_vp9_profile - > + This control allows to select the profile for VP9 encoder. > + This is also used to enumerate supported profiles by VP9 encoder or decoder. > + Possible values are: > + > + > + > +.. flat-table:: > + :header-rows: 0 > + :stub-columns: 0 > + > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0`` > + - Profile 0 > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1`` > + - Profile 1 > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2`` > + - Profile 2 > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` > + - Profile 3 > + > + > > High Efficiency Video Coding (HEVC/H.265) Control Reference > ----------------------------------------------------------- > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c > index d29e45516eb7..401ce21c2e63 100644 > --- a/drivers/media/v4l2-core/v4l2-ctrls.c > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c > @@ -431,6 +431,13 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > "Use Previous Specific Frame", > NULL, > }; > + static const char * const vp9_profile[] = { > + "0", > + "1", > + "2", > + "3", > + NULL, > + }; > > static const char * const flash_led_mode[] = { > "Off", > @@ -614,6 +621,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > return mpeg4_profile; > case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: > return vpx_golden_frame_sel; > + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: > + return vp9_profile; > case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: > return jpeg_chroma_subsampling; > case V4L2_CID_DV_TX_MODE: > @@ -841,6 +850,8 @@ const char *v4l2_ctrl_get_name(u32 id) > case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value"; > case V4L2_CID_MPEG_VIDEO_VPX_PROFILE: return "VPX Profile"; > > + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile"; > + > /* HEVC controls */ > case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value"; > case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP: return "HEVC P-Frame QP Value"; > @@ -1180,6 +1191,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, > case V4L2_CID_DEINTERLACING_MODE: > case V4L2_CID_TUNE_DEEMPHASIS: > case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: > + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: > case V4L2_CID_DETECT_MD_MODE: > case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE: > case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL: > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > index 8d473c979b61..56203b7b715c 100644 > --- a/include/uapi/linux/v4l2-controls.h > +++ b/include/uapi/linux/v4l2-controls.h > @@ -589,6 +589,14 @@ enum v4l2_vp8_golden_frame_sel { > #define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) > #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511) > > +#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_MPEG_BASE+512) > +enum v4l2_mpeg_video_vp9_profile { > + V4L2_MPEG_VIDEO_VP9_PROFILE_0 = 0, > + V4L2_MPEG_VIDEO_VP9_PROFILE_1 = 1, > + V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2, > + V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3, > +}; > + > /* CIDs for HEVC encoding. */ > > #define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_MPEG_BASE + 600) > -- > 2.17.0.921.gf22659ad46-goog >
Hi Hans, On Fri, Jun 8, 2018 at 6:29 PM Hans Verkuil <hverkuil@xs4all.nl> wrote: > > On 05/30/2018 09:16 AM, Keiichi Watanabe wrote: > > Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired > > profile for VP9 encoder and querying for supported profiles by VP9 encoder > > or decoder. > > > > An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be > > used for querying since it is not a menu control but an integer > > control, which cannot return an arbitrary set of supported profiles. > > > > The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as > > with controls for other codec profiles. (e.g. H264) > > Please ignore my reply to patch 2/2. I looked at this a bit more and what you > should do is to change the type of V4L2_CID_MPEG_VIDEO_VPX_PROFILE to enum. Note that we still need a way to query VP8 and VP9 separately, since the supported profiles will differ. (Most of hardware we have today support all 4 profiles of VP8 and only profile 0 of VP9.) Best regards, Tomasz > > All other codec profile controls are all enums, so the fact that VPX_PROFILE > isn't is a bug. Changing the type should not cause any problems since the same > control value is used when you set the control. > > Sylwester: I see that s5p-mfc uses this control, but it is explicitly added > as an integer type control, so the s5p-mfc driver should not be affected by > changing the type of this control. > > Stanimir: this will slightly change the venus driver, but since it is a very > recent driver I think we can get away with changing the core type of the > VPX_PROFILE control. I think that's better than ending up with two controls > that do the same thing. > > Regards, > > Hans > > > > > Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> > > --- > > .../media/uapi/v4l/extended-controls.rst | 26 +++++++++++++++++++ > > drivers/media/v4l2-core/v4l2-ctrls.c | 12 +++++++++ > > include/uapi/linux/v4l2-controls.h | 8 ++++++ > > 3 files changed, 46 insertions(+) > > > > diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst > > index 03931f9b1285..4f7f128a4998 100644 > > --- a/Documentation/media/uapi/v4l/extended-controls.rst > > +++ b/Documentation/media/uapi/v4l/extended-controls.rst > > @@ -1959,6 +1959,32 @@ enum v4l2_vp8_golden_frame_sel - > > Select the desired profile for VPx encoder. Acceptable values are 0, > > 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3. > > > > +.. _v4l2-mpeg-video-vp9-profile: > > + > > +``V4L2_CID_MPEG_VIDEO_VP9_PROFILE`` > > + (enum) > > + > > +enum v4l2_mpeg_video_vp9_profile - > > + This control allows to select the profile for VP9 encoder. > > + This is also used to enumerate supported profiles by VP9 encoder or decoder. > > + Possible values are: > > + > > + > > + > > +.. flat-table:: > > + :header-rows: 0 > > + :stub-columns: 0 > > + > > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0`` > > + - Profile 0 > > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1`` > > + - Profile 1 > > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2`` > > + - Profile 2 > > + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` > > + - Profile 3 > > + > > + > > > > High Efficiency Video Coding (HEVC/H.265) Control Reference > > ----------------------------------------------------------- > > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c > > index d29e45516eb7..401ce21c2e63 100644 > > --- a/drivers/media/v4l2-core/v4l2-ctrls.c > > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c > > @@ -431,6 +431,13 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > > "Use Previous Specific Frame", > > NULL, > > }; > > + static const char * const vp9_profile[] = { > > + "0", > > + "1", > > + "2", > > + "3", > > + NULL, > > + }; > > > > static const char * const flash_led_mode[] = { > > "Off", > > @@ -614,6 +621,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > > return mpeg4_profile; > > case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: > > return vpx_golden_frame_sel; > > + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: > > + return vp9_profile; > > case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: > > return jpeg_chroma_subsampling; > > case V4L2_CID_DV_TX_MODE: > > @@ -841,6 +850,8 @@ const char *v4l2_ctrl_get_name(u32 id) > > case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value"; > > case V4L2_CID_MPEG_VIDEO_VPX_PROFILE: return "VPX Profile"; > > > > + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile"; > > + > > /* HEVC controls */ > > case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value"; > > case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP: return "HEVC P-Frame QP Value"; > > @@ -1180,6 +1191,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, > > case V4L2_CID_DEINTERLACING_MODE: > > case V4L2_CID_TUNE_DEEMPHASIS: > > case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: > > + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: > > case V4L2_CID_DETECT_MD_MODE: > > case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE: > > case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL: > > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > > index 8d473c979b61..56203b7b715c 100644 > > --- a/include/uapi/linux/v4l2-controls.h > > +++ b/include/uapi/linux/v4l2-controls.h > > @@ -589,6 +589,14 @@ enum v4l2_vp8_golden_frame_sel { > > #define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) > > #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511) > > > > +#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_MPEG_BASE+512) > > +enum v4l2_mpeg_video_vp9_profile { > > + V4L2_MPEG_VIDEO_VP9_PROFILE_0 = 0, > > + V4L2_MPEG_VIDEO_VP9_PROFILE_1 = 1, > > + V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2, > > + V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3, > > +}; > > + > > /* CIDs for HEVC encoding. */ > > > > #define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_MPEG_BASE + 600) > > -- > > 2.17.0.921.gf22659ad46-goog > > >
On 06/08/2018 11:31 AM, Tomasz Figa wrote: > Hi Hans, > > On Fri, Jun 8, 2018 at 6:29 PM Hans Verkuil <hverkuil@xs4all.nl> wrote: >> >> On 05/30/2018 09:16 AM, Keiichi Watanabe wrote: >>> Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired >>> profile for VP9 encoder and querying for supported profiles by VP9 encoder >>> or decoder. >>> >>> An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be >>> used for querying since it is not a menu control but an integer >>> control, which cannot return an arbitrary set of supported profiles. >>> >>> The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as >>> with controls for other codec profiles. (e.g. H264) >> >> Please ignore my reply to patch 2/2. I looked at this a bit more and what you >> should do is to change the type of V4L2_CID_MPEG_VIDEO_VPX_PROFILE to enum. > > Note that we still need a way to query VP8 and VP9 separately, since > the supported profiles will differ. (Most of hardware we have today > support all 4 profiles of VP8 and only profile 0 of VP9.) Urgh. So V4L2_CID_MPEG_VIDEO_VPX_PROFILE is really just for VP8? In that case I would suggest that we rename V4L2_CID_MPEG_VIDEO_VPX_PROFILE to V4L2_CID_MPEG_VIDEO_VP8_PROFILE and change it to an enum. Also add this line to v4l2-controls.h: #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE V4L2_CID_MPEG_VIDEO_VP8_PROFILE And add a new V4L2_CID_MPEG_VIDEO_VP9_PROFILE (basically this patch). Would that work? This standardizes on enums for all profile controls (except s5p-mfc, which makes its own int control, up to samsung to decide whether or not to change that), and you have VP8 and VP9 specific profiles. Regards, Hans > > Best regards, > Tomasz > >> >> All other codec profile controls are all enums, so the fact that VPX_PROFILE >> isn't is a bug. Changing the type should not cause any problems since the same >> control value is used when you set the control. >> >> Sylwester: I see that s5p-mfc uses this control, but it is explicitly added >> as an integer type control, so the s5p-mfc driver should not be affected by >> changing the type of this control. >> >> Stanimir: this will slightly change the venus driver, but since it is a very >> recent driver I think we can get away with changing the core type of the >> VPX_PROFILE control. I think that's better than ending up with two controls >> that do the same thing. >> >> Regards, >> >> Hans >> >>> >>> Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> >>> --- >>> .../media/uapi/v4l/extended-controls.rst | 26 +++++++++++++++++++ >>> drivers/media/v4l2-core/v4l2-ctrls.c | 12 +++++++++ >>> include/uapi/linux/v4l2-controls.h | 8 ++++++ >>> 3 files changed, 46 insertions(+) >>> >>> diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst >>> index 03931f9b1285..4f7f128a4998 100644 >>> --- a/Documentation/media/uapi/v4l/extended-controls.rst >>> +++ b/Documentation/media/uapi/v4l/extended-controls.rst >>> @@ -1959,6 +1959,32 @@ enum v4l2_vp8_golden_frame_sel - >>> Select the desired profile for VPx encoder. Acceptable values are 0, >>> 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3. >>> >>> +.. _v4l2-mpeg-video-vp9-profile: >>> + >>> +``V4L2_CID_MPEG_VIDEO_VP9_PROFILE`` >>> + (enum) >>> + >>> +enum v4l2_mpeg_video_vp9_profile - >>> + This control allows to select the profile for VP9 encoder. >>> + This is also used to enumerate supported profiles by VP9 encoder or decoder. >>> + Possible values are: >>> + >>> + >>> + >>> +.. flat-table:: >>> + :header-rows: 0 >>> + :stub-columns: 0 >>> + >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0`` >>> + - Profile 0 >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1`` >>> + - Profile 1 >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2`` >>> + - Profile 2 >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` >>> + - Profile 3 >>> + >>> + >>> >>> High Efficiency Video Coding (HEVC/H.265) Control Reference >>> ----------------------------------------------------------- >>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c >>> index d29e45516eb7..401ce21c2e63 100644 >>> --- a/drivers/media/v4l2-core/v4l2-ctrls.c >>> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c >>> @@ -431,6 +431,13 @@ const char * const *v4l2_ctrl_get_menu(u32 id) >>> "Use Previous Specific Frame", >>> NULL, >>> }; >>> + static const char * const vp9_profile[] = { >>> + "0", >>> + "1", >>> + "2", >>> + "3", >>> + NULL, >>> + }; >>> >>> static const char * const flash_led_mode[] = { >>> "Off", >>> @@ -614,6 +621,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) >>> return mpeg4_profile; >>> case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: >>> return vpx_golden_frame_sel; >>> + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: >>> + return vp9_profile; >>> case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: >>> return jpeg_chroma_subsampling; >>> case V4L2_CID_DV_TX_MODE: >>> @@ -841,6 +850,8 @@ const char *v4l2_ctrl_get_name(u32 id) >>> case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value"; >>> case V4L2_CID_MPEG_VIDEO_VPX_PROFILE: return "VPX Profile"; >>> >>> + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile"; >>> + >>> /* HEVC controls */ >>> case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value"; >>> case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP: return "HEVC P-Frame QP Value"; >>> @@ -1180,6 +1191,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, >>> case V4L2_CID_DEINTERLACING_MODE: >>> case V4L2_CID_TUNE_DEEMPHASIS: >>> case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: >>> + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: >>> case V4L2_CID_DETECT_MD_MODE: >>> case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE: >>> case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL: >>> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h >>> index 8d473c979b61..56203b7b715c 100644 >>> --- a/include/uapi/linux/v4l2-controls.h >>> +++ b/include/uapi/linux/v4l2-controls.h >>> @@ -589,6 +589,14 @@ enum v4l2_vp8_golden_frame_sel { >>> #define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) >>> #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511) >>> >>> +#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_MPEG_BASE+512) >>> +enum v4l2_mpeg_video_vp9_profile { >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_0 = 0, >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_1 = 1, >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2, >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3, >>> +}; >>> + >>> /* CIDs for HEVC encoding. */ >>> >>> #define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_MPEG_BASE + 600) >>> -- >>> 2.17.0.921.gf22659ad46-goog >>> >>
On Fri, Jun 8, 2018 at 6:40 PM Hans Verkuil <hverkuil@xs4all.nl> wrote: > > On 06/08/2018 11:31 AM, Tomasz Figa wrote: > > Hi Hans, > > > > On Fri, Jun 8, 2018 at 6:29 PM Hans Verkuil <hverkuil@xs4all.nl> wrote: > >> > >> On 05/30/2018 09:16 AM, Keiichi Watanabe wrote: > >>> Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired > >>> profile for VP9 encoder and querying for supported profiles by VP9 encoder > >>> or decoder. > >>> > >>> An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be > >>> used for querying since it is not a menu control but an integer > >>> control, which cannot return an arbitrary set of supported profiles. > >>> > >>> The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as > >>> with controls for other codec profiles. (e.g. H264) > >> > >> Please ignore my reply to patch 2/2. I looked at this a bit more and what you > >> should do is to change the type of V4L2_CID_MPEG_VIDEO_VPX_PROFILE to enum. > > > > Note that we still need a way to query VP8 and VP9 separately, since > > the supported profiles will differ. (Most of hardware we have today > > support all 4 profiles of VP8 and only profile 0 of VP9.) > > Urgh. So V4L2_CID_MPEG_VIDEO_VPX_PROFILE is really just for VP8? I don't know the background, but it's completely inconsistent to similar controls we have for other codecs. (Also we don't have V4L2_CID_MPEG_VIDEO_PROFILE, but rather 1 control for each codec). > > In that case I would suggest that we rename V4L2_CID_MPEG_VIDEO_VPX_PROFILE to > V4L2_CID_MPEG_VIDEO_VP8_PROFILE and change it to an enum. Also add this line > to v4l2-controls.h: > > #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE V4L2_CID_MPEG_VIDEO_VP8_PROFILE > > And add a new V4L2_CID_MPEG_VIDEO_VP9_PROFILE (basically this patch). > > Would that work? > > This standardizes on enums for all profile controls (except s5p-mfc, which > makes its own int control, up to samsung to decide whether or not to change > that), and you have VP8 and VP9 specific profiles. Sounds good to me, thanks. Best regards, Tomasz > > Regards, > > Hans > > > > > Best regards, > > Tomasz > > > >> > >> All other codec profile controls are all enums, so the fact that VPX_PROFILE > >> isn't is a bug. Changing the type should not cause any problems since the same > >> control value is used when you set the control. > >> > >> Sylwester: I see that s5p-mfc uses this control, but it is explicitly added > >> as an integer type control, so the s5p-mfc driver should not be affected by > >> changing the type of this control. > >> > >> Stanimir: this will slightly change the venus driver, but since it is a very > >> recent driver I think we can get away with changing the core type of the > >> VPX_PROFILE control. I think that's better than ending up with two controls > >> that do the same thing. > >> > >> Regards, > >> > >> Hans > >> > >>> > >>> Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> > >>> --- > >>> .../media/uapi/v4l/extended-controls.rst | 26 +++++++++++++++++++ > >>> drivers/media/v4l2-core/v4l2-ctrls.c | 12 +++++++++ > >>> include/uapi/linux/v4l2-controls.h | 8 ++++++ > >>> 3 files changed, 46 insertions(+) > >>> > >>> diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst > >>> index 03931f9b1285..4f7f128a4998 100644 > >>> --- a/Documentation/media/uapi/v4l/extended-controls.rst > >>> +++ b/Documentation/media/uapi/v4l/extended-controls.rst > >>> @@ -1959,6 +1959,32 @@ enum v4l2_vp8_golden_frame_sel - > >>> Select the desired profile for VPx encoder. Acceptable values are 0, > >>> 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3. > >>> > >>> +.. _v4l2-mpeg-video-vp9-profile: > >>> + > >>> +``V4L2_CID_MPEG_VIDEO_VP9_PROFILE`` > >>> + (enum) > >>> + > >>> +enum v4l2_mpeg_video_vp9_profile - > >>> + This control allows to select the profile for VP9 encoder. > >>> + This is also used to enumerate supported profiles by VP9 encoder or decoder. > >>> + Possible values are: > >>> + > >>> + > >>> + > >>> +.. flat-table:: > >>> + :header-rows: 0 > >>> + :stub-columns: 0 > >>> + > >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0`` > >>> + - Profile 0 > >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1`` > >>> + - Profile 1 > >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2`` > >>> + - Profile 2 > >>> + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` > >>> + - Profile 3 > >>> + > >>> + > >>> > >>> High Efficiency Video Coding (HEVC/H.265) Control Reference > >>> ----------------------------------------------------------- > >>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c > >>> index d29e45516eb7..401ce21c2e63 100644 > >>> --- a/drivers/media/v4l2-core/v4l2-ctrls.c > >>> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c > >>> @@ -431,6 +431,13 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > >>> "Use Previous Specific Frame", > >>> NULL, > >>> }; > >>> + static const char * const vp9_profile[] = { > >>> + "0", > >>> + "1", > >>> + "2", > >>> + "3", > >>> + NULL, > >>> + }; > >>> > >>> static const char * const flash_led_mode[] = { > >>> "Off", > >>> @@ -614,6 +621,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > >>> return mpeg4_profile; > >>> case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: > >>> return vpx_golden_frame_sel; > >>> + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: > >>> + return vp9_profile; > >>> case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: > >>> return jpeg_chroma_subsampling; > >>> case V4L2_CID_DV_TX_MODE: > >>> @@ -841,6 +850,8 @@ const char *v4l2_ctrl_get_name(u32 id) > >>> case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value"; > >>> case V4L2_CID_MPEG_VIDEO_VPX_PROFILE: return "VPX Profile"; > >>> > >>> + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile"; > >>> + > >>> /* HEVC controls */ > >>> case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value"; > >>> case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP: return "HEVC P-Frame QP Value"; > >>> @@ -1180,6 +1191,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, > >>> case V4L2_CID_DEINTERLACING_MODE: > >>> case V4L2_CID_TUNE_DEEMPHASIS: > >>> case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: > >>> + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: > >>> case V4L2_CID_DETECT_MD_MODE: > >>> case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE: > >>> case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL: > >>> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > >>> index 8d473c979b61..56203b7b715c 100644 > >>> --- a/include/uapi/linux/v4l2-controls.h > >>> +++ b/include/uapi/linux/v4l2-controls.h > >>> @@ -589,6 +589,14 @@ enum v4l2_vp8_golden_frame_sel { > >>> #define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) > >>> #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511) > >>> > >>> +#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_MPEG_BASE+512) > >>> +enum v4l2_mpeg_video_vp9_profile { > >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_0 = 0, > >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_1 = 1, > >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2, > >>> + V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3, > >>> +}; > >>> + > >>> /* CIDs for HEVC encoding. */ > >>> > >>> #define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_MPEG_BASE + 600) > >>> -- > >>> 2.17.0.921.gf22659ad46-goog > >>> > >> >
Hi Hans, On 06/08/2018 12:29 PM, Hans Verkuil wrote: > On 05/30/2018 09:16 AM, Keiichi Watanabe wrote: >> Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired >> profile for VP9 encoder and querying for supported profiles by VP9 encoder >> or decoder. >> >> An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be >> used for querying since it is not a menu control but an integer >> control, which cannot return an arbitrary set of supported profiles. >> >> The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as >> with controls for other codec profiles. (e.g. H264) > > Please ignore my reply to patch 2/2. I looked at this a bit more and what you > should do is to change the type of V4L2_CID_MPEG_VIDEO_VPX_PROFILE to enum. > > All other codec profile controls are all enums, so the fact that VPX_PROFILE > isn't is a bug. Changing the type should not cause any problems since the same > control value is used when you set the control. > > Sylwester: I see that s5p-mfc uses this control, but it is explicitly added > as an integer type control, so the s5p-mfc driver should not be affected by > changing the type of this control. > > Stanimir: this will slightly change the venus driver, but since it is a very > recent driver I think we can get away with changing the core type of the > VPX_PROFILE control. I think that's better than ending up with two controls > that do the same thing. I agree. Actually the changes shouldn't be so much in venus driver.
Hi, Hans. Thank you for the review. Your idea sounds good. However, I think that changing V4L2_CID_MPEG_VIDEO_VPX_PROFILE to an enum breaks both of s5p-mfc and venus drivers. This is because they call 'v4l2_ctrl_new_std' for it. For menu controls, 'v4l2_ctrl_new_std_menu' must be used. https://elixir.bootlin.com/linux/latest/source/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c#L2678 https://elixir.bootlin.com/linux/latest/source/drivers/media/platform/qcom/venus/vdec_ctrls.c#L133 I can fix them within the commit for adding VP8_PROFILE control, but cannot confirm that it works on real devices since I don't have them. What should I do? Best regards, Keiichi On Fri, Jun 8, 2018 at 10:00 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > > Le ven. 8 juin 2018 08:56, Stanimir Varbanov <stanimir.varbanov@linaro.org> a écrit : >> >> Hi Hans, >> >> On 06/08/2018 12:29 PM, Hans Verkuil wrote: >> > On 05/30/2018 09:16 AM, Keiichi Watanabe wrote: >> >> Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired >> >> profile for VP9 encoder and querying for supported profiles by VP9 encoder >> >> or decoder. >> >> >> >> An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be >> >> used for querying since it is not a menu control but an integer >> >> control, which cannot return an arbitrary set of supported profiles. >> >> >> >> The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as >> >> with controls for other codec profiles. (e.g. H264) >> > >> > Please ignore my reply to patch 2/2. I looked at this a bit more and what you >> > should do is to change the type of V4L2_CID_MPEG_VIDEO_VPX_PROFILE to enum. >> > >> > All other codec profile controls are all enums, so the fact that VPX_PROFILE >> > isn't is a bug. Changing the type should not cause any problems since the same >> > control value is used when you set the control. >> > >> > Sylwester: I see that s5p-mfc uses this control, but it is explicitly added >> > as an integer type control, so the s5p-mfc driver should not be affected by >> > changing the type of this control. >> > >> > Stanimir: this will slightly change the venus driver, but since it is a very >> > recent driver I think we can get away with changing the core type of the >> > VPX_PROFILE control. I think that's better than ending up with two controls >> > that do the same thing. >> >> I agree. Actually the changes shouldn't be so much in venus driver. > > > Also fine on userspace side, since profiles enumeration isn't implemented yet in FFMPEG, GStreamer, Chrome > > >> >> -- >> regards, >> Stan
On 11/06/18 08:44, Keiichi Watanabe wrote: > Hi, Hans. > Thank you for the review. > Your idea sounds good. > > However, I think that changing V4L2_CID_MPEG_VIDEO_VPX_PROFILE to an enum > breaks both of s5p-mfc and venus drivers. This is because they call > 'v4l2_ctrl_new_std' for it. For menu controls, > 'v4l2_ctrl_new_std_menu' must be used. > > https://elixir.bootlin.com/linux/latest/source/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c#L2678 > https://elixir.bootlin.com/linux/latest/source/drivers/media/platform/qcom/venus/vdec_ctrls.c#L133 > > I can fix them within the commit for adding VP8_PROFILE control, but > cannot confirm that it works on real devices since I don't have them. > What should I do? Fix it in both drivers with a Cc to stanimir.varbanov@linaro.org (venus) and s.nawrocki@samsung.com (s5p) to let them test/ack the patch. Venus is no problem, the s5p driver can decide to keep the old INT control since it has been in use for such a long time, but that is up to Sylwester to decide. Regards, Hans > > Best regards, > Keiichi > On Fri, Jun 8, 2018 at 10:00 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >> >> >> >> Le ven. 8 juin 2018 08:56, Stanimir Varbanov <stanimir.varbanov@linaro.org> a écrit : >>> >>> Hi Hans, >>> >>> On 06/08/2018 12:29 PM, Hans Verkuil wrote: >>>> On 05/30/2018 09:16 AM, Keiichi Watanabe wrote: >>>>> Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired >>>>> profile for VP9 encoder and querying for supported profiles by VP9 encoder >>>>> or decoder. >>>>> >>>>> An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be >>>>> used for querying since it is not a menu control but an integer >>>>> control, which cannot return an arbitrary set of supported profiles. >>>>> >>>>> The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as >>>>> with controls for other codec profiles. (e.g. H264) >>>> >>>> Please ignore my reply to patch 2/2. I looked at this a bit more and what you >>>> should do is to change the type of V4L2_CID_MPEG_VIDEO_VPX_PROFILE to enum. >>>> >>>> All other codec profile controls are all enums, so the fact that VPX_PROFILE >>>> isn't is a bug. Changing the type should not cause any problems since the same >>>> control value is used when you set the control. >>>> >>>> Sylwester: I see that s5p-mfc uses this control, but it is explicitly added >>>> as an integer type control, so the s5p-mfc driver should not be affected by >>>> changing the type of this control. >>>> >>>> Stanimir: this will slightly change the venus driver, but since it is a very >>>> recent driver I think we can get away with changing the core type of the >>>> VPX_PROFILE control. I think that's better than ending up with two controls >>>> that do the same thing. >>> >>> I agree. Actually the changes shouldn't be so much in venus driver. >> >> >> Also fine on userspace side, since profiles enumeration isn't implemented yet in FFMPEG, GStreamer, Chrome >> >> >>> >>> -- >>> regards, >>> Stan
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 03931f9b1285..4f7f128a4998 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -1959,6 +1959,32 @@ enum v4l2_vp8_golden_frame_sel - Select the desired profile for VPx encoder. Acceptable values are 0, 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3. +.. _v4l2-mpeg-video-vp9-profile: + +``V4L2_CID_MPEG_VIDEO_VP9_PROFILE`` + (enum) + +enum v4l2_mpeg_video_vp9_profile - + This control allows to select the profile for VP9 encoder. + This is also used to enumerate supported profiles by VP9 encoder or decoder. + Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0`` + - Profile 0 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1`` + - Profile 1 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2`` + - Profile 2 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` + - Profile 3 + + High Efficiency Video Coding (HEVC/H.265) Control Reference ----------------------------------------------------------- diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index d29e45516eb7..401ce21c2e63 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -431,6 +431,13 @@ const char * const *v4l2_ctrl_get_menu(u32 id) "Use Previous Specific Frame", NULL, }; + static const char * const vp9_profile[] = { + "0", + "1", + "2", + "3", + NULL, + }; static const char * const flash_led_mode[] = { "Off", @@ -614,6 +621,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return mpeg4_profile; case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: return vpx_golden_frame_sel; + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: + return vp9_profile; case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: return jpeg_chroma_subsampling; case V4L2_CID_DV_TX_MODE: @@ -841,6 +850,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value"; case V4L2_CID_MPEG_VIDEO_VPX_PROFILE: return "VPX Profile"; + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile"; + /* HEVC controls */ case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value"; case V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP: return "HEVC P-Frame QP Value"; @@ -1180,6 +1191,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_DEINTERLACING_MODE: case V4L2_CID_TUNE_DEEMPHASIS: case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: + case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: case V4L2_CID_DETECT_MD_MODE: case V4L2_CID_MPEG_VIDEO_HEVC_PROFILE: case V4L2_CID_MPEG_VIDEO_HEVC_LEVEL: diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 8d473c979b61..56203b7b715c 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -589,6 +589,14 @@ enum v4l2_vp8_golden_frame_sel { #define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE (V4L2_CID_MPEG_BASE+511) +#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_MPEG_BASE+512) +enum v4l2_mpeg_video_vp9_profile { + V4L2_MPEG_VIDEO_VP9_PROFILE_0 = 0, + V4L2_MPEG_VIDEO_VP9_PROFILE_1 = 1, + V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2, + V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3, +}; + /* CIDs for HEVC encoding. */ #define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_MPEG_BASE + 600)
Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for selecting desired profile for VP9 encoder and querying for supported profiles by VP9 encoder or decoder. An existing control V4L2_CID_MPEG_VIDEO_VPX_PROFILE cannot be used for querying since it is not a menu control but an integer control, which cannot return an arbitrary set of supported profiles. The new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE is a menu control as with controls for other codec profiles. (e.g. H264) Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> --- .../media/uapi/v4l/extended-controls.rst | 26 +++++++++++++++++++ drivers/media/v4l2-core/v4l2-ctrls.c | 12 +++++++++ include/uapi/linux/v4l2-controls.h | 8 ++++++ 3 files changed, 46 insertions(+) -- 2.17.0.921.gf22659ad46-goog