diff mbox

[v2,3/5] batman: use BIT_ULL for NL80211_STA_INFO_* attribute types

Message ID 1528971137-432-1-git-send-email-omer.efrat@tandemg.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show

Commit Message

Omer Efrat June 14, 2018, 10:12 a.m. UTC
Since 'filled' member in station_info changed to u64, BIT_ULL macro
should be used with NL80211_STA_INFO_* attribute types instead of BIT.

The BIT macro uses unsigned long type which some architectures handle as 32bit
and this results in compilation warnings such as:

net/mac80211/sta_info.c:2223:2: warning: left shift count >= width of type
  sinfo->filled |= BIT(NL80211_STA_INFO_TID_STATS);
  ^

Signed-off-by: Omer Efrat <omer.efrat@tandemg.com>
---
 net/batman-adv/bat_v_elp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Sven Eckelmann June 14, 2018, 10:40 a.m. UTC | #1
On Donnerstag, 14. Juni 2018 13:12:17 CEST Omer Efrat wrote:
> Since 'filled' member in station_info changed to u64, BIT_ULL macro
> should be used with NL80211_STA_INFO_* attribute types instead of BIT.
> 
> The BIT macro uses unsigned long type which some architectures handle as 32bit
> and this results in compilation warnings such as:
> 
> net/mac80211/sta_info.c:2223:2: warning: left shift count >= width of type
>   sinfo->filled |= BIT(NL80211_STA_INFO_TID_STATS);
>   ^
> 
> Signed-off-by: Omer Efrat <omer.efrat@tandemg.com>
> ---
>  net/batman-adv/bat_v_elp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

It is called "batman-adv" and not "batman". And when (as in commit) did it 
change to 64 bit?  Shouldn't there be a "Fixed: " line to know which kernels 
are affected (especially for the stable kernel developers).

Kind regards,
	Sven
Sven Eckelmann June 14, 2018, 10:53 a.m. UTC | #2
Hi,

here are the infos which were missing and which should be included in the 
commit message

> > Since 'filled' member in station_info changed to u64

in commit 739960f128e5 ("cfg80211/nl80211: Add support for 
NL80211_STA_INFO_RX_DURATION")

[...]

Fixes: d62890885efb ("batman-adv: Accept only filled wifi station info")

> > Signed-off-by: Omer Efrat <omer.efrat@tandemg.com>


Kind regards,
	Sven
Johannes Berg June 14, 2018, 11:05 a.m. UTC | #3
On Thu, 2018-06-14 at 12:53 +0200, Sven Eckelmann wrote:
> Hi,
> 
> here are the infos which were missing and which should be included in the 
> commit message
> 
> > > Since 'filled' member in station_info changed to u64
> 
> in commit 739960f128e5 ("cfg80211/nl80211: Add support for 
> NL80211_STA_INFO_RX_DURATION")

Yeah, which actually means this patch isn't needed?

BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT) is fine since
NL80211_STA_INFO_EXPECTED_THROUGHPUT is actually == 27.

johannes
Sven Eckelmann June 14, 2018, 11:20 a.m. UTC | #4
On Donnerstag, 14. Juni 2018 13:05:16 CEST Johannes Berg wrote:
[...]
> > in commit 739960f128e5 ("cfg80211/nl80211: Add support for 
> > NL80211_STA_INFO_RX_DURATION")
> 
> Yeah, which actually means this patch isn't needed?
> 
> BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT) is fine since
> NL80211_STA_INFO_EXPECTED_THROUGHPUT is actually == 27.

Hadn't verified this before but this would make sense. So no fixes here - just 
some "cleanup" patch to make these tests more consistent. Thanks for checking.

@Omer: If you want it as cleanup patch then make it clear in the patch that 
the warning you've showed here is not actually not something which you will 
see in in the modified code.

Kind regards,
	Sven
Omer Efrat June 14, 2018, 12:50 p.m. UTC | #5
Sven Eckelmann wrote:
>@Omer: If you want it as cleanup patch then make it clear in the patch that
>the warning you've showed here is not actually not something which you will
>see in in the modified code.

I will send v3 as clean up patch.

Omer Efrat.
diff mbox

Patch

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 71c20c1..71e6474 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -114,7 +114,7 @@  static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 		}
 		if (ret)
 			goto default_throughput;
-		if (!(sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT)))
+		if (!(sinfo.filled & BIT_ULL(NL80211_STA_INFO_EXPECTED_THROUGHPUT)))
 			goto default_throughput;
 
 		return sinfo.expected_throughput / 100;