| Message ID | 1529230056-18004-1-git-send-email-omer.efrat@tandemg.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Kalle Valo |
| Headers | show |
On Sun, Jun 17, 2018 at 01:07:36PM +0300, Omer Efrat wrote: > The BIT macro uses unsigned long which some architectures handle as 32 bit > and therefore might cause macro's shift to overflow when used on a value > equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). > > Since 'filled' member in station_info changed to u64, BIT_ULL macro > should be used with all NL80211_STA_INFO_* attribute types instead of BIT > to prevent future possible bugs when one will use BIT macro for higher > attributes by mistake. > > This commit cleans up all usages of BIT macro with the above field > in cfg80211 by changing it to BIT_ULL instead. > > Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg KH <greg@kroah.com> writes: > On Sun, Jun 17, 2018 at 01:07:36PM +0300, Omer Efrat wrote: >> The BIT macro uses unsigned long which some architectures handle as 32 bit >> and therefore might cause macro's shift to overflow when used on a value >> equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). >> >> Since 'filled' member in station_info changed to u64, BIT_ULL macro >> should be used with all NL80211_STA_INFO_* attribute types instead of BIT >> to prevent future possible bugs when one will use BIT macro for higher >> attributes by mistake. >> >> This commit cleans up all usages of BIT macro with the above field >> in cfg80211 by changing it to BIT_ULL instead. >> >> Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Via which tree is this supposed to go?
On Mon, Jun 18, 2018 at 10:29:43AM +0300, Kalle Valo wrote: > Greg KH <greg@kroah.com> writes: > > > On Sun, Jun 17, 2018 at 01:07:36PM +0300, Omer Efrat wrote: > >> The BIT macro uses unsigned long which some architectures handle as 32 bit > >> and therefore might cause macro's shift to overflow when used on a value > >> equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). > >> > >> Since 'filled' member in station_info changed to u64, BIT_ULL macro > >> should be used with all NL80211_STA_INFO_* attribute types instead of BIT > >> to prevent future possible bugs when one will use BIT macro for higher > >> attributes by mistake. > >> > >> This commit cleans up all usages of BIT macro with the above field > >> in cfg80211 by changing it to BIT_ULL instead. > >> > >> Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> > > > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > Via which tree is this supposed to go? Not mine :) Have fun with it! greg k-h
Greg KH <greg@kroah.com> writes: > On Mon, Jun 18, 2018 at 10:29:43AM +0300, Kalle Valo wrote: >> Greg KH <greg@kroah.com> writes: >> >> > On Sun, Jun 17, 2018 at 01:07:36PM +0300, Omer Efrat wrote: >> >> The BIT macro uses unsigned long which some architectures handle as 32 bit >> >> and therefore might cause macro's shift to overflow when used on a value >> >> equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). >> >> >> >> Since 'filled' member in station_info changed to u64, BIT_ULL macro >> >> should be used with all NL80211_STA_INFO_* attribute types instead of BIT >> >> to prevent future possible bugs when one will use BIT macro for higher >> >> attributes by mistake. >> >> >> >> This commit cleans up all usages of BIT macro with the above field >> >> in cfg80211 by changing it to BIT_ULL instead. >> >> >> >> Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> >> > >> > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >> >> Via which tree is this supposed to go? > > Not mine :) > > Have fun with it! Hehe :) But I don't see why this patch 5 should go either to mac80211 or wireless-drivers trees as there's no dependency or anything like that, AFAIK it's just cleanup. So it would simplest to get this patch 5 to staging tree, less conflicts that way. Patches 1 and 2 of course go to mac80211 tree and patch 4 goes to wireless-drivers.
On Mon, Jun 18, 2018 at 04:11:51PM +0300, Kalle Valo wrote: > Greg KH <greg@kroah.com> writes: > > > On Mon, Jun 18, 2018 at 10:29:43AM +0300, Kalle Valo wrote: > >> Greg KH <greg@kroah.com> writes: > >> > >> > On Sun, Jun 17, 2018 at 01:07:36PM +0300, Omer Efrat wrote: > >> >> The BIT macro uses unsigned long which some architectures handle as 32 bit > >> >> and therefore might cause macro's shift to overflow when used on a value > >> >> equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). > >> >> > >> >> Since 'filled' member in station_info changed to u64, BIT_ULL macro > >> >> should be used with all NL80211_STA_INFO_* attribute types instead of BIT > >> >> to prevent future possible bugs when one will use BIT macro for higher > >> >> attributes by mistake. > >> >> > >> >> This commit cleans up all usages of BIT macro with the above field > >> >> in cfg80211 by changing it to BIT_ULL instead. > >> >> > >> >> Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> > >> > > >> > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > >> > >> Via which tree is this supposed to go? > > > > Not mine :) > > > > Have fun with it! > > Hehe :) > > But I don't see why this patch 5 should go either to mac80211 or > wireless-drivers trees as there's no dependency or anything like that, > AFAIK it's just cleanup. So it would simplest to get this patch 5 to > staging tree, less conflicts that way. Sorry, I thought it was dependant on the previous patches, given that the first time I tried to apply it, it failed. Omer, can you just resend this single patch to me and I will be glad to apply it to the staging tree, if it really is stand-alone. thanks, greg k-h
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c index 02178e2..26b838f 100644 --- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c +++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c @@ -1273,16 +1273,16 @@ static int cfg80211_rtw_get_station(struct wiphy *wiphy, goto exit; } - sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); sinfo->signal = translate_percentage_to_dbm(padapter->recvpriv.signal_strength); - sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); sinfo->txrate.legacy = rtw_get_cur_max_rate(padapter); - sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS); sinfo->rx_packets = sta_rx_data_pkts(psta); - sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_PACKETS); sinfo->tx_packets = psta->sta_stats.tx_pkts; } @@ -3013,7 +3013,7 @@ static int cfg80211_rtw_dump_station(struct wiphy *wiphy, struct net_device *nde goto exit; } memcpy(mac, psta->hwaddr, ETH_ALEN); - sinfo->filled = BIT(NL80211_STA_INFO_SIGNAL); + sinfo->filled = BIT_ULL(NL80211_STA_INFO_SIGNAL); sinfo->signal = psta->rssi; exit: diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index e248702..13d3918 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -1141,7 +1141,7 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev, return -ENOENT; } - sinfo->filled |= BIT(NL80211_STA_INFO_INACTIVE_TIME); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_INACTIVE_TIME); wilc_get_inactive_time(vif, mac, &inactive_time); sinfo->inactive_time = 1000 * inactive_time; @@ -1150,11 +1150,11 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev, wilc_get_statistics(vif, &stats); - sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL) | - BIT(NL80211_STA_INFO_RX_PACKETS) | - BIT(NL80211_STA_INFO_TX_PACKETS) | - BIT(NL80211_STA_INFO_TX_FAILED) | - BIT(NL80211_STA_INFO_TX_BITRATE); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL) | + BIT_ULL(NL80211_STA_INFO_RX_PACKETS) | + BIT_ULL(NL80211_STA_INFO_TX_PACKETS) | + BIT_ULL(NL80211_STA_INFO_TX_FAILED) | + BIT_ULL(NL80211_STA_INFO_TX_BITRATE); sinfo->signal = stats.rssi; sinfo->rx_packets = stats.rx_cnt; @@ -1775,7 +1775,7 @@ static int dump_station(struct wiphy *wiphy, struct net_device *dev, priv = wiphy_priv(wiphy); vif = netdev_priv(priv->dev); - sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); wilc_get_rssi(vif, &sinfo->signal); diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 4291225..07c52e3 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -282,9 +282,9 @@ static int prism2_get_station(struct wiphy *wiphy, struct net_device *dev, if (result == 0) { sinfo->txrate.legacy = quality.txrate.data; - sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); sinfo->signal = quality.level.data; - sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); } return result;
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in cfg80211 by changing it to BIT_ULL instead. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> --- drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 10 +++++----- drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 14 +++++++------- drivers/staging/wlan-ng/cfg80211.c | 4 ++-- 3 files changed, 14 insertions(+), 14 deletions(-)