[INTERNAL,3/3] PCI: iproc: Disable MSI parsing in certain PAXC blocks

Commit Message

Ray Jui May 17, 2018, 5:21 p.m. UTC

The internal MSI parsing logic in certain revisions of PAXC root
complexes does not work properly and can casue corruptions on the
writes. They need to be disabled

Signed-off-by: Ray Jui <[e-mail]>
Reviewed-by: Scott Branden <[e-mail]>
---
 drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

Comments

Oza Pawandeep May 18, 2018, 9:23 a.m. UTC | #1

On 2018-05-17 22:51, Ray Jui wrote:
> The internal MSI parsing logic in certain revisions of PAXC root
> complexes does not work properly and can casue corruptions on the
> writes. They need to be disabled
> 
> Signed-off-by: Ray Jui <[e-mail]>
> Reviewed-by: Scott Branden <[e-mail]>
> ---
>  drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
>  1 file changed, 32 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-iproc.c 
> b/drivers/pci/host/pcie-iproc.c
> index 3c76c5f..b906d80 100644
> --- a/drivers/pci/host/pcie-iproc.c
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -1144,10 +1144,22 @@ static int iproc_pcie_paxb_v2_msi_steer(struct
> iproc_pcie *pcie, u64 msi_addr)
>  	return ret;
>  }
> 
> -static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 
> msi_addr)
> +static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 
> msi_addr,
> +					 bool enable)
>  {
>  	u32 val;
> 
> +	if (!enable) {
> +		/*
> +		 * Disable PAXC MSI steering. All write transfers will be
> +		 * treated as non-MSI transfers
> +		 */
> +		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
> +		val &= ~MSI_ENABLE_CFG;
> +		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
> +		return;
> +	}
> +
>  	/*
>  	 * Program bits [43:13] of address of GITS_TRANSLATER register into
>  	 * bits [30:0] of the MSI base address register.  In fact, in all 
> iProc
> @@ -1201,7 +1213,7 @@ static int iproc_pcie_msi_steer(struct iproc_pcie 
> *pcie,
>  			return ret;
>  		break;
>  	case IPROC_PCIE_PAXC_V2:
> -		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
> +		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);

Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere else with 
'false' ?
I see its getting called only from one place in current code 
iproc_pcie_msi_steer().

>  		break;
>  	default:
>  		return -EINVAL;
> @@ -1427,6 +1439,24 @@ int iproc_pcie_remove(struct iproc_pcie *pcie)
>  }
>  EXPORT_SYMBOL(iproc_pcie_remove);
> 
> +/*
> + * The MSI parsing logic in certain revisions of Broadcom PAXC based 
> root
> + * complex does not work and needs to be disabled
> + */
> +static void quirk_paxc_disable_msi_parsing(struct pci_dev *pdev)
> +{
> +	struct iproc_pcie *pcie = iproc_data(pdev->bus);
> +
> +	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
> +		iproc_pcie_paxc_v2_msi_steer(pcie, 0, false);
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
> +			quirk_paxc_disable_msi_parsing);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
> +			quirk_paxc_disable_msi_parsing);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
> +			quirk_paxc_disable_msi_parsing);
> +
>  MODULE_AUTHOR("Ray Jui <[e-mail]>");
>  MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
>  MODULE_LICENSE("GPL v2");

Lorenzo Pieralisi May 18, 2018, 1:56 p.m. UTC | #2

On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
> On 2018-05-17 22:51, Ray Jui wrote:
> >The internal MSI parsing logic in certain revisions of PAXC root
> >complexes does not work properly and can casue corruptions on the
> >writes. They need to be disabled
> >
> >Signed-off-by: Ray Jui <[e-mail]>
> >Reviewed-by: Scott Branden <[e-mail]>
> >---
> > drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
> > 1 file changed, 32 insertions(+), 2 deletions(-)
> >
> >diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> >index 3c76c5f..b906d80 100644
> >--- a/drivers/pci/host/pcie-iproc.c
> >+++ b/drivers/pci/host/pcie-iproc.c
> >@@ -1144,10 +1144,22 @@ static int iproc_pcie_paxb_v2_msi_steer(struct
> >iproc_pcie *pcie, u64 msi_addr)
> > 	return ret;
> > }
> >
> >-static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
> >msi_addr)
> >+static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
> >msi_addr,
> >+					 bool enable)
> > {
> > 	u32 val;
> >
> >+	if (!enable) {
> >+		/*
> >+		 * Disable PAXC MSI steering. All write transfers will be
> >+		 * treated as non-MSI transfers
> >+		 */
> >+		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
> >+		val &= ~MSI_ENABLE_CFG;
> >+		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
> >+		return;
> >+	}
> >+
> > 	/*
> > 	 * Program bits [43:13] of address of GITS_TRANSLATER register into
> > 	 * bits [30:0] of the MSI base address register.  In fact, in all iProc
> >@@ -1201,7 +1213,7 @@ static int iproc_pcie_msi_steer(struct iproc_pcie
> >*pcie,
> > 			return ret;
> > 		break;
> > 	case IPROC_PCIE_PAXC_V2:
> >-		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
> >+		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
> 
> Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere else with 'false' ?
> I see its getting called only from one place in current code
> iproc_pcie_msi_steer().

It is called below with the false field to disable MSIs. That's probably
one reason more to create a function to enable/disable MSIs instead of
adding a parameter to iproc_pcie_paxc_v2_msi_steer().

Which brings me to the question: what happens to those MSIs writes
when MSIs are disabled according to this patch ? Are they terminated
at the root complex ?

Lorenzo

> > 		break;
> > 	default:
> > 		return -EINVAL;
> >@@ -1427,6 +1439,24 @@ int iproc_pcie_remove(struct iproc_pcie *pcie)
> > }
> > EXPORT_SYMBOL(iproc_pcie_remove);
> >
> >+/*
> >+ * The MSI parsing logic in certain revisions of Broadcom PAXC based root
> >+ * complex does not work and needs to be disabled
> >+ */
> >+static void quirk_paxc_disable_msi_parsing(struct pci_dev *pdev)
> >+{
> >+	struct iproc_pcie *pcie = iproc_data(pdev->bus);
> >+
> >+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
> >+		iproc_pcie_paxc_v2_msi_steer(pcie, 0, false);
> >+}
> >+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
> >+			quirk_paxc_disable_msi_parsing);
> >+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
> >+			quirk_paxc_disable_msi_parsing);
> >+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
> >+			quirk_paxc_disable_msi_parsing);
> >+
> > MODULE_AUTHOR("Ray Jui <[e-mail]>");
> > MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
> > MODULE_LICENSE("GPL v2");

Ray Jui May 18, 2018, 7:48 p.m. UTC | #3

Hi Lorenzo,

On 5/18/2018 6:56 AM, Lorenzo Pieralisi wrote:
> On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
>> On 2018-05-17 22:51, Ray Jui wrote:
>>> The internal MSI parsing logic in certain revisions of PAXC root
>>> complexes does not work properly and can casue corruptions on the
>>> writes. They need to be disabled
>>>
>>> Signed-off-by: Ray Jui <[e-mail]>
>>> Reviewed-by: Scott Branden <[e-mail]>
>>> ---
>>> drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
>>> 1 file changed, 32 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
>>> index 3c76c5f..b906d80 100644
>>> --- a/drivers/pci/host/pcie-iproc.c
>>> +++ b/drivers/pci/host/pcie-iproc.c
>>> @@ -1144,10 +1144,22 @@ static int iproc_pcie_paxb_v2_msi_steer(struct
>>> iproc_pcie *pcie, u64 msi_addr)
>>> 	return ret;
>>> }
>>>
>>> -static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
>>> msi_addr)
>>> +static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
>>> msi_addr,
>>> +					 bool enable)
>>> {
>>> 	u32 val;
>>>
>>> +	if (!enable) {
>>> +		/*
>>> +		 * Disable PAXC MSI steering. All write transfers will be
>>> +		 * treated as non-MSI transfers
>>> +		 */
>>> +		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
>>> +		val &= ~MSI_ENABLE_CFG;
>>> +		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
>>> +		return;
>>> +	}
>>> +
>>> 	/*
>>> 	 * Program bits [43:13] of address of GITS_TRANSLATER register into
>>> 	 * bits [30:0] of the MSI base address register.  In fact, in all iProc
>>> @@ -1201,7 +1213,7 @@ static int iproc_pcie_msi_steer(struct iproc_pcie
>>> *pcie,
>>> 			return ret;
>>> 		break;
>>> 	case IPROC_PCIE_PAXC_V2:
>>> -		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
>>> +		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
>>
>> Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere else with 'false' ?
>> I see its getting called only from one place in current code
>> iproc_pcie_msi_steer().
> 
> It is called below with the false field to disable MSIs. That's probably
> one reason more to create a function to enable/disable MSIs instead of
> adding a parameter to iproc_pcie_paxc_v2_msi_steer().

Correct. Thanks for helping to explain.

> 
> Which brings me to the question: what happens to those MSIs writes
> when MSIs are disabled according to this patch ? Are they terminated
> at the root complex ?

Note the PAXC block parses MSI writes from our internally connected 
endpoints (i.e., an embedded network processor). The PAXC block examines 
these MSI writes and modifies the memory attributes (to DEVICE) of these 
data and then send them out to the AXI bus. These MSI writes will then 
be forwarded to the GIC (e.g., GICv2m, GICv3-ITS from ARM) for further 
processing. This is saying, PAXC itself does not process these MSI 
writes. They are processed by the GIC and associated interrupt will be 
generated form the GIC. PAXC's job is to parse and tag them properly so 
these MSI writes can reach the GIC, and at the same, reach the GIC at 
the right order.

On some of these problematic PAXCs, we are being forced to disable this 
PAXC internal parsing logic. In this case, we set up static mapping with 
the IOMMU to modify the memory attributes of these MSI writes. These MSI 
writes are always designated towards a specific memory address (e.g., on 
the GICv3 based system, it's the address of the translator register), 
and that's why static mapping table can be set up to work around this.

> 
> Lorenzo
> 
>>> 		break;
>>> 	default:
>>> 		return -EINVAL;
>>> @@ -1427,6 +1439,24 @@ int iproc_pcie_remove(struct iproc_pcie *pcie)
>>> }
>>> EXPORT_SYMBOL(iproc_pcie_remove);
>>>
>>> +/*
>>> + * The MSI parsing logic in certain revisions of Broadcom PAXC based root
>>> + * complex does not work and needs to be disabled
>>> + */
>>> +static void quirk_paxc_disable_msi_parsing(struct pci_dev *pdev)
>>> +{
>>> +	struct iproc_pcie *pcie = iproc_data(pdev->bus);
>>> +
>>> +	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
>>> +		iproc_pcie_paxc_v2_msi_steer(pcie, 0, false);
>>> +}
>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
>>> +			quirk_paxc_disable_msi_parsing);
>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
>>> +			quirk_paxc_disable_msi_parsing);
>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
>>> +			quirk_paxc_disable_msi_parsing);
>>> +
>>> MODULE_AUTHOR("Ray Jui <[e-mail]>");
>>> MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
>>> MODULE_LICENSE("GPL v2");

Lorenzo Pieralisi May 21, 2018, 1:33 p.m. UTC | #4

[+Robin]

On Fri, May 18, 2018 at 12:48:28PM -0700, Ray Jui wrote:
> Hi Lorenzo,
> 
> On 5/18/2018 6:56 AM, Lorenzo Pieralisi wrote:
> >On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
> >>On 2018-05-17 22:51, Ray Jui wrote:
> >>>The internal MSI parsing logic in certain revisions of PAXC root
> >>>complexes does not work properly and can casue corruptions on the
> >>>writes. They need to be disabled
> >>>
> >>>Signed-off-by: Ray Jui <[e-mail]>
> >>>Reviewed-by: Scott Branden <[e-mail]>
> >>>---
> >>>drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
> >>>1 file changed, 32 insertions(+), 2 deletions(-)
> >>>
> >>>diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> >>>index 3c76c5f..b906d80 100644
> >>>--- a/drivers/pci/host/pcie-iproc.c
> >>>+++ b/drivers/pci/host/pcie-iproc.c
> >>>@@ -1144,10 +1144,22 @@ static int iproc_pcie_paxb_v2_msi_steer(struct
> >>>iproc_pcie *pcie, u64 msi_addr)
> >>>	return ret;
> >>>}
> >>>
> >>>-static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
> >>>msi_addr)
> >>>+static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
> >>>msi_addr,
> >>>+					 bool enable)
> >>>{
> >>>	u32 val;
> >>>
> >>>+	if (!enable) {
> >>>+		/*
> >>>+		 * Disable PAXC MSI steering. All write transfers will be
> >>>+		 * treated as non-MSI transfers
> >>>+		 */
> >>>+		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
> >>>+		val &= ~MSI_ENABLE_CFG;
> >>>+		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
> >>>+		return;
> >>>+	}
> >>>+
> >>>	/*
> >>>	 * Program bits [43:13] of address of GITS_TRANSLATER register into
> >>>	 * bits [30:0] of the MSI base address register.  In fact, in all iProc
> >>>@@ -1201,7 +1213,7 @@ static int iproc_pcie_msi_steer(struct iproc_pcie
> >>>*pcie,
> >>>			return ret;
> >>>		break;
> >>>	case IPROC_PCIE_PAXC_V2:
> >>>-		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
> >>>+		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
> >>
> >>Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere else with 'false' ?
> >>I see its getting called only from one place in current code
> >>iproc_pcie_msi_steer().
> >
> >It is called below with the false field to disable MSIs. That's probably
> >one reason more to create a function to enable/disable MSIs instead of
> >adding a parameter to iproc_pcie_paxc_v2_msi_steer().
> 
> Correct. Thanks for helping to explain.
> 
> >
> >Which brings me to the question: what happens to those MSIs writes
> >when MSIs are disabled according to this patch ? Are they terminated
> >at the root complex ?
> 
> Note the PAXC block parses MSI writes from our internally connected
> endpoints (i.e., an embedded network processor). The PAXC block examines
> these MSI writes and modifies the memory attributes (to DEVICE) of these
> data and then send them out to the AXI bus. These MSI writes will then be
> forwarded to the GIC (e.g., GICv2m, GICv3-ITS from ARM) for further
> processing. This is saying, PAXC itself does not process these MSI writes.
> They are processed by the GIC and associated interrupt will be generated
> form the GIC. PAXC's job is to parse and tag them properly so these MSI
> writes can reach the GIC, and at the same, reach the GIC at the right order.
> 
> On some of these problematic PAXCs, we are being forced to disable this PAXC
> internal parsing logic. In this case, we set up static mapping with the
> IOMMU to modify the memory attributes of these MSI writes. These MSI writes
> are always designated towards a specific memory address (e.g., on the GICv3
> based system, it's the address of the translator register), and that's why
> static mapping table can be set up to work around this.

Which means, I presume, that there must be some code that somehow
somewhere in the kernel sets-up those mappings and it has to be related
to this patch, in which case I wonder why we enable the PAXC steering at
all given that this (hack) can be done through the IOMMU (and I assume
that on all PAXC platforms that do need MSIs there is an IOMMU IP
upstream the root bridge, otherwise I have no idea what will happen to
those MSI writes).

Lorenzo

Robin Murphy May 21, 2018, 2:26 p.m. UTC | #5

On 21/05/18 14:33, Lorenzo Pieralisi wrote:
> [+Robin]
> 
> On Fri, May 18, 2018 at 12:48:28PM -0700, Ray Jui wrote:
>> Hi Lorenzo,
>>
>> On 5/18/2018 6:56 AM, Lorenzo Pieralisi wrote:
>>> On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
>>>> On 2018-05-17 22:51, Ray Jui wrote:
>>>>> The internal MSI parsing logic in certain revisions of PAXC root
>>>>> complexes does not work properly and can casue corruptions on the
>>>>> writes. They need to be disabled
>>>>>
>>>>> Signed-off-by: Ray Jui <[e-mail]>
>>>>> Reviewed-by: Scott Branden <[e-mail]>
>>>>> ---
>>>>> drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
>>>>> 1 file changed, 32 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
>>>>> index 3c76c5f..b906d80 100644
>>>>> --- a/drivers/pci/host/pcie-iproc.c
>>>>> +++ b/drivers/pci/host/pcie-iproc.c
>>>>> @@ -1144,10 +1144,22 @@ static int iproc_pcie_paxb_v2_msi_steer(struct
>>>>> iproc_pcie *pcie, u64 msi_addr)
>>>>> 	return ret;
>>>>> }
>>>>>
>>>>> -static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
>>>>> msi_addr)
>>>>> +static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64
>>>>> msi_addr,
>>>>> +					 bool enable)
>>>>> {
>>>>> 	u32 val;
>>>>>
>>>>> +	if (!enable) {
>>>>> +		/*
>>>>> +		 * Disable PAXC MSI steering. All write transfers will be
>>>>> +		 * treated as non-MSI transfers
>>>>> +		 */
>>>>> +		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
>>>>> +		val &= ~MSI_ENABLE_CFG;
>>>>> +		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
>>>>> +		return;
>>>>> +	}
>>>>> +
>>>>> 	/*
>>>>> 	 * Program bits [43:13] of address of GITS_TRANSLATER register into
>>>>> 	 * bits [30:0] of the MSI base address register.  In fact, in all iProc
>>>>> @@ -1201,7 +1213,7 @@ static int iproc_pcie_msi_steer(struct iproc_pcie
>>>>> *pcie,
>>>>> 			return ret;
>>>>> 		break;
>>>>> 	case IPROC_PCIE_PAXC_V2:
>>>>> -		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
>>>>> +		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
>>>>
>>>> Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere else with 'false' ?
>>>> I see its getting called only from one place in current code
>>>> iproc_pcie_msi_steer().
>>>
>>> It is called below with the false field to disable MSIs. That's probably
>>> one reason more to create a function to enable/disable MSIs instead of
>>> adding a parameter to iproc_pcie_paxc_v2_msi_steer().
>>
>> Correct. Thanks for helping to explain.
>>
>>>
>>> Which brings me to the question: what happens to those MSIs writes
>>> when MSIs are disabled according to this patch ? Are they terminated
>>> at the root complex ?
>>
>> Note the PAXC block parses MSI writes from our internally connected
>> endpoints (i.e., an embedded network processor). The PAXC block examines
>> these MSI writes and modifies the memory attributes (to DEVICE) of these
>> data and then send them out to the AXI bus. These MSI writes will then be
>> forwarded to the GIC (e.g., GICv2m, GICv3-ITS from ARM) for further
>> processing. This is saying, PAXC itself does not process these MSI writes.
>> They are processed by the GIC and associated interrupt will be generated
>> form the GIC. PAXC's job is to parse and tag them properly so these MSI
>> writes can reach the GIC, and at the same, reach the GIC at the right order.
>>
>> On some of these problematic PAXCs, we are being forced to disable this PAXC
>> internal parsing logic. In this case, we set up static mapping with the
>> IOMMU to modify the memory attributes of these MSI writes. These MSI writes
>> are always designated towards a specific memory address (e.g., on the GICv3
>> based system, it's the address of the translator register), and that's why
>> static mapping table can be set up to work around this.
> 
> Which means, I presume, that there must be some code that somehow
> somewhere in the kernel sets-up those mappings and it has to be related
> to this patch, in which case I wonder why we enable the PAXC steering at
> all given that this (hack) can be done through the IOMMU (and I assume
> that on all PAXC platforms that do need MSIs there is an IOMMU IP
> upstream the root bridge, otherwise I have no idea what will happen to
> those MSI writes).

If it's only rewriting memory attributes (FWIW it sounds like this thing 
is comparable to the AXI translation table of the PLDA root complex we 
have in Juno), then if the IOMMU is controlled by Linux the PAXC 
shouldn't be needed anyway. In that situation the GICv2m/ITS doorbell 
will be already mapped for the endpoint as device memory (and usually at 
some arbitrary address that the PAXC won't recognise anyway) - see 
iommu_dma_get_msi_page().

If Linux *doesn't* know about the IOMMU, then the firmware should be 
free to set it up with a static 1:1 mapping of the PA space and leave it 
that way, provided Linux can't inadvertently stomp on those page tables 
later.

Robin.

Ray Jui May 22, 2018, 4:48 p.m. UTC | #6

Hi Robin/Lorenzo,

On 5/21/2018 7:26 AM, Robin Murphy wrote:
> On 21/05/18 14:33, Lorenzo Pieralisi wrote:
>> [+Robin]
>>
>> On Fri, May 18, 2018 at 12:48:28PM -0700, Ray Jui wrote:
>>> Hi Lorenzo,
>>>
>>> On 5/18/2018 6:56 AM, Lorenzo Pieralisi wrote:
>>>> On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
>>>>> On 2018-05-17 22:51, Ray Jui wrote:
>>>>>> The internal MSI parsing logic in certain revisions of PAXC root
>>>>>> complexes does not work properly and can casue corruptions on the
>>>>>> writes. They need to be disabled
>>>>>>
>>>>>> Signed-off-by: Ray Jui <[e-mail]>
>>>>>> Reviewed-by: Scott Branden <[e-mail]>
>>>>>> ---
>>>>>> drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
>>>>>> 1 file changed, 32 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/pci/host/pcie-iproc.c 
>>>>>> b/drivers/pci/host/pcie-iproc.c
>>>>>> index 3c76c5f..b906d80 100644
>>>>>> --- a/drivers/pci/host/pcie-iproc.c
>>>>>> +++ b/drivers/pci/host/pcie-iproc.c
>>>>>> @@ -1144,10 +1144,22 @@ static int 
>>>>>> iproc_pcie_paxb_v2_msi_steer(struct
>>>>>> iproc_pcie *pcie, u64 msi_addr)
>>>>>>     return ret;
>>>>>> }
>>>>>>
>>>>>> -static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, 
>>>>>> u64
>>>>>> msi_addr)
>>>>>> +static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, 
>>>>>> u64
>>>>>> msi_addr,
>>>>>> +                     bool enable)
>>>>>> {
>>>>>>     u32 val;
>>>>>>
>>>>>> +    if (!enable) {
>>>>>> +        /*
>>>>>> +         * Disable PAXC MSI steering. All write transfers will be
>>>>>> +         * treated as non-MSI transfers
>>>>>> +         */
>>>>>> +        val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
>>>>>> +        val &= ~MSI_ENABLE_CFG;
>>>>>> +        iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
>>>>>> +        return;
>>>>>> +    }
>>>>>> +
>>>>>>     /*
>>>>>>      * Program bits [43:13] of address of GITS_TRANSLATER register 
>>>>>> into
>>>>>>      * bits [30:0] of the MSI base address register.  In fact, in 
>>>>>> all iProc
>>>>>> @@ -1201,7 +1213,7 @@ static int iproc_pcie_msi_steer(struct 
>>>>>> iproc_pcie
>>>>>> *pcie,
>>>>>>             return ret;
>>>>>>         break;
>>>>>>     case IPROC_PCIE_PAXC_V2:
>>>>>> -        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
>>>>>> +        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
>>>>>
>>>>> Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere else with 
>>>>> 'false' ?
>>>>> I see its getting called only from one place in current code
>>>>> iproc_pcie_msi_steer().
>>>>
>>>> It is called below with the false field to disable MSIs. That's 
>>>> probably
>>>> one reason more to create a function to enable/disable MSIs instead of
>>>> adding a parameter to iproc_pcie_paxc_v2_msi_steer().
>>>
>>> Correct. Thanks for helping to explain.
>>>
>>>>
>>>> Which brings me to the question: what happens to those MSIs writes
>>>> when MSIs are disabled according to this patch ? Are they terminated
>>>> at the root complex ?
>>>
>>> Note the PAXC block parses MSI writes from our internally connected
>>> endpoints (i.e., an embedded network processor). The PAXC block examines
>>> these MSI writes and modifies the memory attributes (to DEVICE) of these
>>> data and then send them out to the AXI bus. These MSI writes will 
>>> then be
>>> forwarded to the GIC (e.g., GICv2m, GICv3-ITS from ARM) for further
>>> processing. This is saying, PAXC itself does not process these MSI 
>>> writes.
>>> They are processed by the GIC and associated interrupt will be generated
>>> form the GIC. PAXC's job is to parse and tag them properly so these MSI
>>> writes can reach the GIC, and at the same, reach the GIC at the right 
>>> order.
>>>
>>> On some of these problematic PAXCs, we are being forced to disable 
>>> this PAXC
>>> internal parsing logic. In this case, we set up static mapping with the
>>> IOMMU to modify the memory attributes of these MSI writes. These MSI 
>>> writes
>>> are always designated towards a specific memory address (e.g., on the 
>>> GICv3
>>> based system, it's the address of the translator register), and 
>>> that's why
>>> static mapping table can be set up to work around this.
>>
>> Which means, I presume, that there must be some code that somehow
>> somewhere in the kernel sets-up those mappings and it has to be related
>> to this patch, in which case I wonder why we enable the PAXC steering at
>> all given that this (hack) can be done through the IOMMU (and I assume
>> that on all PAXC platforms that do need MSIs there is an IOMMU IP
>> upstream the root bridge, otherwise I have no idea what will happen to
>> those MSI writes).
> 
> If it's only rewriting memory attributes (FWIW it sounds like this thing 
> is comparable to the AXI translation table of the PLDA root complex we 
> have in Juno), then if the IOMMU is controlled by Linux the PAXC 
> shouldn't be needed anyway. In that situation the GICv2m/ITS doorbell 
> will be already mapped for the endpoint as device memory (and usually at 
> some arbitrary address that the PAXC won't recognise anyway) - see 
> iommu_dma_get_msi_page().
> 
> If Linux *doesn't* know about the IOMMU, then the firmware should be 
> free to set it up with a static 1:1 mapping of the PA space and leave it 
> that way, provided Linux can't inadvertently stomp on those page tables 
> later.

Right, in our case, we had our ATF bootloader set up 1:1 mapping for 
this. In this case, PAXC internal MSI parsing is completely disabled 
(which is what this patch does for those PAXC blocks that have this issue).

> 
> Robin.

Ray Jui May 22, 2018, 4:52 p.m. UTC | #7

On 5/22/2018 9:48 AM, Ray Jui wrote:
> Hi Robin/Lorenzo,
> 
> On 5/21/2018 7:26 AM, Robin Murphy wrote:
>> On 21/05/18 14:33, Lorenzo Pieralisi wrote:
>>> [+Robin]
>>>
>>> On Fri, May 18, 2018 at 12:48:28PM -0700, Ray Jui wrote:
>>>> Hi Lorenzo,
>>>>
>>>> On 5/18/2018 6:56 AM, Lorenzo Pieralisi wrote:
>>>>> On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
>>>>>> On 2018-05-17 22:51, Ray Jui wrote:
>>>>>>> The internal MSI parsing logic in certain revisions of PAXC root
>>>>>>> complexes does not work properly and can casue corruptions on the
>>>>>>> writes. They need to be disabled
>>>>>>>
>>>>>>> Signed-off-by: Ray Jui <[e-mail]>
>>>>>>> Reviewed-by: Scott Branden <[e-mail]>
>>>>>>> ---
>>>>>>> drivers/pci/host/pcie-iproc.c | 34 
>>>>>>> ++++++++++++++++++++++++++++++++--
>>>>>>> 1 file changed, 32 insertions(+), 2 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/pci/host/pcie-iproc.c 
>>>>>>> b/drivers/pci/host/pcie-iproc.c
>>>>>>> index 3c76c5f..b906d80 100644
>>>>>>> --- a/drivers/pci/host/pcie-iproc.c
>>>>>>> +++ b/drivers/pci/host/pcie-iproc.c
>>>>>>> @@ -1144,10 +1144,22 @@ static int 
>>>>>>> iproc_pcie_paxb_v2_msi_steer(struct
>>>>>>> iproc_pcie *pcie, u64 msi_addr)
>>>>>>>     return ret;
>>>>>>> }
>>>>>>>
>>>>>>> -static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie 
>>>>>>> *pcie, u64
>>>>>>> msi_addr)
>>>>>>> +static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie 
>>>>>>> *pcie, u64
>>>>>>> msi_addr,
>>>>>>> +                     bool enable)
>>>>>>> {
>>>>>>>     u32 val;
>>>>>>>
>>>>>>> +    if (!enable) {
>>>>>>> +        /*
>>>>>>> +         * Disable PAXC MSI steering. All write transfers will be
>>>>>>> +         * treated as non-MSI transfers
>>>>>>> +         */
>>>>>>> +        val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
>>>>>>> +        val &= ~MSI_ENABLE_CFG;
>>>>>>> +        iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
>>>>>>> +        return;
>>>>>>> +    }
>>>>>>> +
>>>>>>>     /*
>>>>>>>      * Program bits [43:13] of address of GITS_TRANSLATER 
>>>>>>> register into
>>>>>>>      * bits [30:0] of the MSI base address register.  In fact, in 
>>>>>>> all iProc
>>>>>>> @@ -1201,7 +1213,7 @@ static int iproc_pcie_msi_steer(struct 
>>>>>>> iproc_pcie
>>>>>>> *pcie,
>>>>>>>             return ret;
>>>>>>>         break;
>>>>>>>     case IPROC_PCIE_PAXC_V2:
>>>>>>> -        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
>>>>>>> +        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
>>>>>>
>>>>>> Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere else with 
>>>>>> 'false' ?
>>>>>> I see its getting called only from one place in current code
>>>>>> iproc_pcie_msi_steer().
>>>>>
>>>>> It is called below with the false field to disable MSIs. That's 
>>>>> probably
>>>>> one reason more to create a function to enable/disable MSIs instead of
>>>>> adding a parameter to iproc_pcie_paxc_v2_msi_steer().
>>>>
>>>> Correct. Thanks for helping to explain.
>>>>
>>>>>
>>>>> Which brings me to the question: what happens to those MSIs writes
>>>>> when MSIs are disabled according to this patch ? Are they terminated
>>>>> at the root complex ?
>>>>
>>>> Note the PAXC block parses MSI writes from our internally connected
>>>> endpoints (i.e., an embedded network processor). The PAXC block 
>>>> examines
>>>> these MSI writes and modifies the memory attributes (to DEVICE) of 
>>>> these
>>>> data and then send them out to the AXI bus. These MSI writes will 
>>>> then be
>>>> forwarded to the GIC (e.g., GICv2m, GICv3-ITS from ARM) for further
>>>> processing. This is saying, PAXC itself does not process these MSI 
>>>> writes.
>>>> They are processed by the GIC and associated interrupt will be 
>>>> generated
>>>> form the GIC. PAXC's job is to parse and tag them properly so these MSI
>>>> writes can reach the GIC, and at the same, reach the GIC at the 
>>>> right order.
>>>>
>>>> On some of these problematic PAXCs, we are being forced to disable 
>>>> this PAXC
>>>> internal parsing logic. In this case, we set up static mapping with the
>>>> IOMMU to modify the memory attributes of these MSI writes. These MSI 
>>>> writes
>>>> are always designated towards a specific memory address (e.g., on 
>>>> the GICv3
>>>> based system, it's the address of the translator register), and 
>>>> that's why
>>>> static mapping table can be set up to work around this.
>>>
>>> Which means, I presume, that there must be some code that somehow
>>> somewhere in the kernel sets-up those mappings and it has to be related
>>> to this patch, in which case I wonder why we enable the PAXC steering at
>>> all given that this (hack) can be done through the IOMMU (and I assume
>>> that on all PAXC platforms that do need MSIs there is an IOMMU IP
>>> upstream the root bridge, otherwise I have no idea what will happen to
>>> those MSI writes).
>>
>> If it's only rewriting memory attributes (FWIW it sounds like this 
>> thing is comparable to the AXI translation table of the PLDA root 
>> complex we have in Juno), then if the IOMMU is controlled by Linux the 
>> PAXC shouldn't be needed anyway. In that situation the GICv2m/ITS 
>> doorbell will be already mapped for the endpoint as device memory (and 
>> usually at some arbitrary address that the PAXC won't recognise 
>> anyway) - see iommu_dma_get_msi_page().
>>
>> If Linux *doesn't* know about the IOMMU, then the firmware should be 
>> free to set it up with a static 1:1 mapping of the PA space and leave 
>> it that way, provided Linux can't inadvertently stomp on those page 
>> tables later.
> 
> Right, in our case, we had our ATF bootloader set up 1:1 mapping for 
> this. In this case, PAXC internal MSI parsing is completely disabled 
> (which is what this patch does for those PAXC blocks that have this issue).
> 

And forgot to mention, the logic in our bootloader to set up 1:1 mapping 
to work around this issue is chip dependent and only activated for 
certain revisions of PAXC that has this issue.

>>
>> Robin.

Lorenzo Pieralisi July 4, 2018, 3:13 p.m. UTC | #8

On Tue, May 22, 2018 at 09:48:55AM -0700, Ray Jui wrote:
> Hi Robin/Lorenzo,
> 
> On 5/21/2018 7:26 AM, Robin Murphy wrote:
> >On 21/05/18 14:33, Lorenzo Pieralisi wrote:
> >>[+Robin]
> >>
> >>On Fri, May 18, 2018 at 12:48:28PM -0700, Ray Jui wrote:
> >>>Hi Lorenzo,
> >>>
> >>>On 5/18/2018 6:56 AM, Lorenzo Pieralisi wrote:
> >>>>On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
> >>>>>On 2018-05-17 22:51, Ray Jui wrote:
> >>>>>>The internal MSI parsing logic in certain revisions of PAXC root
> >>>>>>complexes does not work properly and can casue corruptions on the
> >>>>>>writes. They need to be disabled
> >>>>>>
> >>>>>>Signed-off-by: Ray Jui <[e-mail]>
> >>>>>>Reviewed-by: Scott Branden <[e-mail]>
> >>>>>>---
> >>>>>>drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
> >>>>>>1 file changed, 32 insertions(+), 2 deletions(-)
> >>>>>>
> >>>>>>diff --git a/drivers/pci/host/pcie-iproc.c
> >>>>>>b/drivers/pci/host/pcie-iproc.c
> >>>>>>index 3c76c5f..b906d80 100644
> >>>>>>--- a/drivers/pci/host/pcie-iproc.c
> >>>>>>+++ b/drivers/pci/host/pcie-iproc.c
> >>>>>>@@ -1144,10 +1144,22 @@ static int
> >>>>>>iproc_pcie_paxb_v2_msi_steer(struct
> >>>>>>iproc_pcie *pcie, u64 msi_addr)
> >>>>>>    return ret;
> >>>>>>}
> >>>>>>
> >>>>>>-static void iproc_pcie_paxc_v2_msi_steer(struct
> >>>>>>iproc_pcie *pcie, u64
> >>>>>>msi_addr)
> >>>>>>+static void iproc_pcie_paxc_v2_msi_steer(struct
> >>>>>>iproc_pcie *pcie, u64
> >>>>>>msi_addr,
> >>>>>>+                     bool enable)
> >>>>>>{
> >>>>>>    u32 val;
> >>>>>>
> >>>>>>+    if (!enable) {
> >>>>>>+        /*
> >>>>>>+         * Disable PAXC MSI steering. All write transfers will be
> >>>>>>+         * treated as non-MSI transfers
> >>>>>>+         */
> >>>>>>+        val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
> >>>>>>+        val &= ~MSI_ENABLE_CFG;
> >>>>>>+        iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
> >>>>>>+        return;
> >>>>>>+    }
> >>>>>>+
> >>>>>>    /*
> >>>>>>     * Program bits [43:13] of address of
> >>>>>>GITS_TRANSLATER register into
> >>>>>>     * bits [30:0] of the MSI base address register.  In
> >>>>>>fact, in all iProc
> >>>>>>@@ -1201,7 +1213,7 @@ static int
> >>>>>>iproc_pcie_msi_steer(struct iproc_pcie
> >>>>>>*pcie,
> >>>>>>            return ret;
> >>>>>>        break;
> >>>>>>    case IPROC_PCIE_PAXC_V2:
> >>>>>>-        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
> >>>>>>+        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
> >>>>>
> >>>>>Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere
> >>>>>else with 'false' ?
> >>>>>I see its getting called only from one place in current code
> >>>>>iproc_pcie_msi_steer().
> >>>>
> >>>>It is called below with the false field to disable MSIs.
> >>>>That's probably
> >>>>one reason more to create a function to enable/disable MSIs instead of
> >>>>adding a parameter to iproc_pcie_paxc_v2_msi_steer().
> >>>
> >>>Correct. Thanks for helping to explain.
> >>>
> >>>>
> >>>>Which brings me to the question: what happens to those MSIs writes
> >>>>when MSIs are disabled according to this patch ? Are they terminated
> >>>>at the root complex ?
> >>>
> >>>Note the PAXC block parses MSI writes from our internally connected
> >>>endpoints (i.e., an embedded network processor). The PAXC block examines
> >>>these MSI writes and modifies the memory attributes (to DEVICE) of these
> >>>data and then send them out to the AXI bus. These MSI writes
> >>>will then be
> >>>forwarded to the GIC (e.g., GICv2m, GICv3-ITS from ARM) for further
> >>>processing. This is saying, PAXC itself does not process these
> >>>MSI writes.
> >>>They are processed by the GIC and associated interrupt will be generated
> >>>form the GIC. PAXC's job is to parse and tag them properly so these MSI
> >>>writes can reach the GIC, and at the same, reach the GIC at
> >>>the right order.
> >>>
> >>>On some of these problematic PAXCs, we are being forced to
> >>>disable this PAXC
> >>>internal parsing logic. In this case, we set up static mapping with the
> >>>IOMMU to modify the memory attributes of these MSI writes.
> >>>These MSI writes
> >>>are always designated towards a specific memory address (e.g.,
> >>>on the GICv3
> >>>based system, it's the address of the translator register),
> >>>and that's why
> >>>static mapping table can be set up to work around this.
> >>
> >>Which means, I presume, that there must be some code that somehow
> >>somewhere in the kernel sets-up those mappings and it has to be related
> >>to this patch, in which case I wonder why we enable the PAXC steering at
> >>all given that this (hack) can be done through the IOMMU (and I assume
> >>that on all PAXC platforms that do need MSIs there is an IOMMU IP
> >>upstream the root bridge, otherwise I have no idea what will happen to
> >>those MSI writes).
> >
> >If it's only rewriting memory attributes (FWIW it sounds like this
> >thing is comparable to the AXI translation table of the PLDA root
> >complex we have in Juno), then if the IOMMU is controlled by Linux
> >the PAXC shouldn't be needed anyway. In that situation the
> >GICv2m/ITS doorbell will be already mapped for the endpoint as
> >device memory (and usually at some arbitrary address that the PAXC
> >won't recognise anyway) - see iommu_dma_get_msi_page().
> >
> >If Linux *doesn't* know about the IOMMU, then the firmware should
> >be free to set it up with a static 1:1 mapping of the PA space and
> >leave it that way, provided Linux can't inadvertently stomp on
> >those page tables later.
> 
> Right, in our case, we had our ATF bootloader set up 1:1 mapping for
> this. In this case, PAXC internal MSI parsing is completely disabled
> (which is what this patch does for those PAXC blocks that have this
> issue).

Ok so to sum it up, why does the PCI host bridge code has to deal with
this steering at all given the discussion above ? Why can't we disable
PAXC steering completely ?

Lorenzo

Ray Jui July 4, 2018, 3:44 p.m. UTC | #9

Hi Lorenzo,

On 7/4/2018 8:13 AM, Lorenzo Pieralisi wrote:
> On Tue, May 22, 2018 at 09:48:55AM -0700, Ray Jui wrote:
>> Hi Robin/Lorenzo,
>>
>> On 5/21/2018 7:26 AM, Robin Murphy wrote:
>>> On 21/05/18 14:33, Lorenzo Pieralisi wrote:
>>>> [+Robin]
>>>>
>>>> On Fri, May 18, 2018 at 12:48:28PM -0700, Ray Jui wrote:
>>>>> Hi Lorenzo,
>>>>>
>>>>> On 5/18/2018 6:56 AM, Lorenzo Pieralisi wrote:
>>>>>> On Fri, May 18, 2018 at 02:53:41PM +0530, [e-mail] wrote:
>>>>>>> On 2018-05-17 22:51, Ray Jui wrote:
>>>>>>>> The internal MSI parsing logic in certain revisions of PAXC root
>>>>>>>> complexes does not work properly and can casue corruptions on the
>>>>>>>> writes. They need to be disabled
>>>>>>>>
>>>>>>>> Signed-off-by: Ray Jui <[e-mail]>
>>>>>>>> Reviewed-by: Scott Branden <[e-mail]>
>>>>>>>> ---
>>>>>>>> drivers/pci/host/pcie-iproc.c | 34 ++++++++++++++++++++++++++++++++--
>>>>>>>> 1 file changed, 32 insertions(+), 2 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/pci/host/pcie-iproc.c
>>>>>>>> b/drivers/pci/host/pcie-iproc.c
>>>>>>>> index 3c76c5f..b906d80 100644
>>>>>>>> --- a/drivers/pci/host/pcie-iproc.c
>>>>>>>> +++ b/drivers/pci/host/pcie-iproc.c
>>>>>>>> @@ -1144,10 +1144,22 @@ static int
>>>>>>>> iproc_pcie_paxb_v2_msi_steer(struct
>>>>>>>> iproc_pcie *pcie, u64 msi_addr)
>>>>>>>>      return ret;
>>>>>>>> }
>>>>>>>>
>>>>>>>> -static void iproc_pcie_paxc_v2_msi_steer(struct
>>>>>>>> iproc_pcie *pcie, u64
>>>>>>>> msi_addr)
>>>>>>>> +static void iproc_pcie_paxc_v2_msi_steer(struct
>>>>>>>> iproc_pcie *pcie, u64
>>>>>>>> msi_addr,
>>>>>>>> +                     bool enable)
>>>>>>>> {
>>>>>>>>      u32 val;
>>>>>>>>
>>>>>>>> +    if (!enable) {
>>>>>>>> +        /*
>>>>>>>> +         * Disable PAXC MSI steering. All write transfers will be
>>>>>>>> +         * treated as non-MSI transfers
>>>>>>>> +         */
>>>>>>>> +        val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
>>>>>>>> +        val &= ~MSI_ENABLE_CFG;
>>>>>>>> +        iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
>>>>>>>> +        return;
>>>>>>>> +    }
>>>>>>>> +
>>>>>>>>      /*
>>>>>>>>       * Program bits [43:13] of address of
>>>>>>>> GITS_TRANSLATER register into
>>>>>>>>       * bits [30:0] of the MSI base address register.  In
>>>>>>>> fact, in all iProc
>>>>>>>> @@ -1201,7 +1213,7 @@ static int
>>>>>>>> iproc_pcie_msi_steer(struct iproc_pcie
>>>>>>>> *pcie,
>>>>>>>>              return ret;
>>>>>>>>          break;
>>>>>>>>      case IPROC_PCIE_PAXC_V2:
>>>>>>>> -        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
>>>>>>>> +        iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
>>>>>>>
>>>>>>> Are you calling iproc_pcie_paxc_v2_msi_steer() anywhere
>>>>>>> else with 'false' ?
>>>>>>> I see its getting called only from one place in current code
>>>>>>> iproc_pcie_msi_steer().
>>>>>>
>>>>>> It is called below with the false field to disable MSIs.
>>>>>> That's probably
>>>>>> one reason more to create a function to enable/disable MSIs instead of
>>>>>> adding a parameter to iproc_pcie_paxc_v2_msi_steer().
>>>>>
>>>>> Correct. Thanks for helping to explain.
>>>>>
>>>>>>
>>>>>> Which brings me to the question: what happens to those MSIs writes
>>>>>> when MSIs are disabled according to this patch ? Are they terminated
>>>>>> at the root complex ?
>>>>>
>>>>> Note the PAXC block parses MSI writes from our internally connected
>>>>> endpoints (i.e., an embedded network processor). The PAXC block examines
>>>>> these MSI writes and modifies the memory attributes (to DEVICE) of these
>>>>> data and then send them out to the AXI bus. These MSI writes
>>>>> will then be
>>>>> forwarded to the GIC (e.g., GICv2m, GICv3-ITS from ARM) for further
>>>>> processing. This is saying, PAXC itself does not process these
>>>>> MSI writes.
>>>>> They are processed by the GIC and associated interrupt will be generated
>>>>> form the GIC. PAXC's job is to parse and tag them properly so these MSI
>>>>> writes can reach the GIC, and at the same, reach the GIC at
>>>>> the right order.
>>>>>
>>>>> On some of these problematic PAXCs, we are being forced to
>>>>> disable this PAXC
>>>>> internal parsing logic. In this case, we set up static mapping with the
>>>>> IOMMU to modify the memory attributes of these MSI writes.
>>>>> These MSI writes
>>>>> are always designated towards a specific memory address (e.g.,
>>>>> on the GICv3
>>>>> based system, it's the address of the translator register),
>>>>> and that's why
>>>>> static mapping table can be set up to work around this.
>>>>
>>>> Which means, I presume, that there must be some code that somehow
>>>> somewhere in the kernel sets-up those mappings and it has to be related
>>>> to this patch, in which case I wonder why we enable the PAXC steering at
>>>> all given that this (hack) can be done through the IOMMU (and I assume
>>>> that on all PAXC platforms that do need MSIs there is an IOMMU IP
>>>> upstream the root bridge, otherwise I have no idea what will happen to
>>>> those MSI writes).
>>>
>>> If it's only rewriting memory attributes (FWIW it sounds like this
>>> thing is comparable to the AXI translation table of the PLDA root
>>> complex we have in Juno), then if the IOMMU is controlled by Linux
>>> the PAXC shouldn't be needed anyway. In that situation the
>>> GICv2m/ITS doorbell will be already mapped for the endpoint as
>>> device memory (and usually at some arbitrary address that the PAXC
>>> won't recognise anyway) - see iommu_dma_get_msi_page().
>>>
>>> If Linux *doesn't* know about the IOMMU, then the firmware should
>>> be free to set it up with a static 1:1 mapping of the PA space and
>>> leave it that way, provided Linux can't inadvertently stomp on
>>> those page tables later.
>>
>> Right, in our case, we had our ATF bootloader set up 1:1 mapping for
>> this. In this case, PAXC internal MSI parsing is completely disabled
>> (which is what this patch does for those PAXC blocks that have this
>> issue).
> 
> Ok so to sum it up, why does the PCI host bridge code has to deal with
> this steering at all given the discussion above ? Why can't we disable
> PAXC steering completely ?
> 
> Lorenzo
> 

Sorry I probably did not give enough information in our previous discussion.

Per recommendation from our ASIC team, we are advised to enable MSI 
steering in the PAXC block in the latest revision of our SoC (and 
therefore there's this patch to enable/disable MSI steering based on the 
root complex device ID).

Note PAXC is an highly custom, emulated root complex hard-wire connected 
internally to our embedded network processor (that acts as EP). Some 
special tagging in done in the firmware for the network processor to 
distinguish between data packets, completion, and MSI packets 
(data/completion in the perspective of our network processor), and 
inbound packets are re-ordered within PAXC to 1) ensure that they are in 
the correct order (e.g., completion and MSI needs to arrive after data), 
and 2) achieve extremely high performance (i.e., pure strictly ordered 
packets will actually result very poor performance). I don't know more 
details but the above is the high-level summary that explains why we 
need to enable PAXC based steering in the latest revision of our SoC.

Thanks,

Ray

Patch

diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 3c76c5f..b906d80 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -1144,10 +1144,22 @@  static int iproc_pcie_paxb_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr)
 	return ret;
 }
 
-static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr)
+static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr,
+					 bool enable)
 {
 	u32 val;
 
+	if (!enable) {
+		/*
+		 * Disable PAXC MSI steering. All write transfers will be
+		 * treated as non-MSI transfers
+		 */
+		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
+		val &= ~MSI_ENABLE_CFG;
+		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
+		return;
+	}
+
 	/*
 	 * Program bits [43:13] of address of GITS_TRANSLATER register into
 	 * bits [30:0] of the MSI base address register.  In fact, in all iProc
@@ -1201,7 +1213,7 @@  static int iproc_pcie_msi_steer(struct iproc_pcie *pcie,
 			return ret;
 		break;
 	case IPROC_PCIE_PAXC_V2:
-		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
+		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
 		break;
 	default:
 		return -EINVAL;
@@ -1427,6 +1439,24 @@  int iproc_pcie_remove(struct iproc_pcie *pcie)
 }
 EXPORT_SYMBOL(iproc_pcie_remove);
 
+/*
+ * The MSI parsing logic in certain revisions of Broadcom PAXC based root
+ * complex does not work and needs to be disabled
+ */
+static void quirk_paxc_disable_msi_parsing(struct pci_dev *pdev)
+{
+	struct iproc_pcie *pcie = iproc_data(pdev->bus);
+
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		iproc_pcie_paxc_v2_msi_steer(pcie, 0, false);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
+			quirk_paxc_disable_msi_parsing);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
+			quirk_paxc_disable_msi_parsing);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
+			quirk_paxc_disable_msi_parsing);
+
 MODULE_AUTHOR("Ray Jui <[e-mail]>");
 MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
 MODULE_LICENSE("GPL v2");