diff mbox

[2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators

Message ID 20180710220202.116404-3-dianders@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Doug Anderson July 10, 2018, 10:02 p.m. UTC
Add regulator devices for PMIC regulators managed via VRM and XOB
RPMh accelerators.

A few notes here:
- Regulators are added directly to the board file.  While it's true
  that this will mean a bunch of copy/pasting for other boards that
  are very similar to MTP, this is probably the right call since
  boards could make changes to the way these regulators are hooked up
  and trying to find a way to avoid duplication will result in some
  confusing node overrides.
- Regulators are always given labels based on the schematic.  If there
  is more than one logical name on the schematic for the same rail the
  all of these secondary names are also listed and should be referred
  to as appropriate.
- Regulators all default to HPM mode with the assumption that if a
  rail is being provided to a driver that doesn't specify the needed
  current that we'll at least be correct.

NOTE: This patch is loosely based on one originally shared to me by
David Collins.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 446 ++++++++++++++++++++++++
 1 file changed, 446 insertions(+)

Comments

David Collins July 10, 2018, 10:32 p.m. UTC | #1
Hello Doug,

On 07/10/2018 03:02 PM, Douglas Anderson wrote:
...
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vph_pwr>;
> +		vdd-s3-supply = <&vph_pwr>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-s6-supply = <&vph_pwr>;
> +		vdd-s7-supply = <&vph_pwr>;
> +		vdd-s8-supply = <&vph_pwr>;
> +		vdd-s9-supply = <&vph_pwr>;
> +		vdd-s10-supply = <&vph_pwr>;
> +		vdd-s11-supply = <&vph_pwr>;
> +		vdd-s12-supply = <&vph_pwr>;
> +		vdd-s13-supply = <&vph_pwr>;
> +		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
> +		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
> +		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
> +		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
> +		vdd-l6-supply = <&vph_pwr>;
> +		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
> +		vdd-l9-supply = <&vreg_bob>;
> +		vdd-l10-l23-l25-supply = <&vreg_bob>;
> +		vdd-l13-l19-l21-supply = <&vreg_bob>;
> +		vdd-l16-l28-supply = <&vreg_bob>;
> +		vdd-l18-l22-supply = <&vreg_bob>;
> +		vdd-l20-l24-supply = <&vreg_bob>;
> +		vdd-l26-supply = <&vreg_s3a_1p35>;
> +		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;

I would suggest not specifying any of these regulator parent supplies in
device tree.  RPMh will be enforcing all regulator parent-child
dependencies.  Therefore, handling the dependencies in Linux is redundant.
 It will result in additional RPMh requests as well as more time spent in
regulator framework calls.  Overall, it will lead to slightly lower
performance.  Note that while specifying the parent supplies results in
less efficient runtime behavior, it is not technically wrong so you could
keep them in place if you prefer.

Take care,
David
Doug Anderson July 10, 2018, 10:55 p.m. UTC | #2
Hi

On Tue, Jul 10, 2018 at 3:32 PM, David Collins <collinsd@codeaurora.org> wrote:
> Hello Doug,
>
> On 07/10/2018 03:02 PM, Douglas Anderson wrote:
> ...
>> +             vdd-s1-supply = <&vph_pwr>;
>> +             vdd-s2-supply = <&vph_pwr>;
>> +             vdd-s3-supply = <&vph_pwr>;
>> +             vdd-s4-supply = <&vph_pwr>;
>> +             vdd-s5-supply = <&vph_pwr>;
>> +             vdd-s6-supply = <&vph_pwr>;
>> +             vdd-s7-supply = <&vph_pwr>;
>> +             vdd-s8-supply = <&vph_pwr>;
>> +             vdd-s9-supply = <&vph_pwr>;
>> +             vdd-s10-supply = <&vph_pwr>;
>> +             vdd-s11-supply = <&vph_pwr>;
>> +             vdd-s12-supply = <&vph_pwr>;
>> +             vdd-s13-supply = <&vph_pwr>;
>> +             vdd-l1-l27-supply = <&vreg_s7a_1p025>;
>> +             vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
>> +             vdd-l3-l11-supply = <&vreg_s7a_1p025>;
>> +             vdd-l4-l5-supply = <&vreg_s7a_1p025>;
>> +             vdd-l6-supply = <&vph_pwr>;
>> +             vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
>> +             vdd-l9-supply = <&vreg_bob>;
>> +             vdd-l10-l23-l25-supply = <&vreg_bob>;
>> +             vdd-l13-l19-l21-supply = <&vreg_bob>;
>> +             vdd-l16-l28-supply = <&vreg_bob>;
>> +             vdd-l18-l22-supply = <&vreg_bob>;
>> +             vdd-l20-l24-supply = <&vreg_bob>;
>> +             vdd-l26-supply = <&vreg_s3a_1p35>;
>> +             vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
>
> I would suggest not specifying any of these regulator parent supplies in
> device tree.  RPMh will be enforcing all regulator parent-child
> dependencies.  Therefore, handling the dependencies in Linux is redundant.
>  It will result in additional RPMh requests as well as more time spent in
> regulator framework calls.  Overall, it will lead to slightly lower
> performance.  Note that while specifying the parent supplies results in
> less efficient runtime behavior, it is not technically wrong so you could
> keep them in place if you prefer.

Interesting.  ...so RPMh will automatically turn on parent regulators
when their children are enabled (assuming that the parent regulator is
also RPMh controlled)?

Personally I'd still prefer to see Linux managing its own state and
relying less on RPMh-automatic stuff, but I'd defer to Bjorn / Andy
(or others) to override me.

-Doug
David Collins July 10, 2018, 11:01 p.m. UTC | #3
Hi,

On 07/10/2018 03:55 PM, Doug Anderson wrote:
> On Tue, Jul 10, 2018 at 3:32 PM, David Collins <collinsd@codeaurora.org> wrote:
>> On 07/10/2018 03:02 PM, Douglas Anderson wrote:
>> ...
>>> +             vdd-s1-supply = <&vph_pwr>;
>>> +             vdd-s2-supply = <&vph_pwr>;
>>> +             vdd-s3-supply = <&vph_pwr>;
>>> +             vdd-s4-supply = <&vph_pwr>;
>>> +             vdd-s5-supply = <&vph_pwr>;
>>> +             vdd-s6-supply = <&vph_pwr>;
>>> +             vdd-s7-supply = <&vph_pwr>;
>>> +             vdd-s8-supply = <&vph_pwr>;
>>> +             vdd-s9-supply = <&vph_pwr>;
>>> +             vdd-s10-supply = <&vph_pwr>;
>>> +             vdd-s11-supply = <&vph_pwr>;
>>> +             vdd-s12-supply = <&vph_pwr>;
>>> +             vdd-s13-supply = <&vph_pwr>;
>>> +             vdd-l1-l27-supply = <&vreg_s7a_1p025>;
>>> +             vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
>>> +             vdd-l3-l11-supply = <&vreg_s7a_1p025>;
>>> +             vdd-l4-l5-supply = <&vreg_s7a_1p025>;
>>> +             vdd-l6-supply = <&vph_pwr>;
>>> +             vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
>>> +             vdd-l9-supply = <&vreg_bob>;
>>> +             vdd-l10-l23-l25-supply = <&vreg_bob>;
>>> +             vdd-l13-l19-l21-supply = <&vreg_bob>;
>>> +             vdd-l16-l28-supply = <&vreg_bob>;
>>> +             vdd-l18-l22-supply = <&vreg_bob>;
>>> +             vdd-l20-l24-supply = <&vreg_bob>;
>>> +             vdd-l26-supply = <&vreg_s3a_1p35>;
>>> +             vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
>>
>> I would suggest not specifying any of these regulator parent supplies in
>> device tree.  RPMh will be enforcing all regulator parent-child
>> dependencies.  Therefore, handling the dependencies in Linux is redundant.
>>  It will result in additional RPMh requests as well as more time spent in
>> regulator framework calls.  Overall, it will lead to slightly lower
>> performance.  Note that while specifying the parent supplies results in
>> less efficient runtime behavior, it is not technically wrong so you could
>> keep them in place if you prefer.
> 
> Interesting.  ...so RPMh will automatically turn on parent regulators
> when their children are enabled (assuming that the parent regulator is
> also RPMh controlled)?

Yes, exactly.  RPMh also ensures that the voltage of a parent regulator is
sufficient to meet minimum headroom voltage requirements of all
subregulated child regulators.


> Personally I'd still prefer to see Linux managing its own state and
> relying less on RPMh-automatic stuff, but I'd defer to Bjorn / Andy
> (or others) to override me.

Ok

Take care,
David
kernel test robot July 11, 2018, 2:57 a.m. UTC | #4
Hi Douglas,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on agross/for-next]
[also build test ERROR on next-20180710]
[cannot apply to v4.18-rc4]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Douglas-Anderson/arm64-dts-sdm845-Add-RPMh-regulators-and-usb/20180711-061052
base:   https://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git for-next
config: arm64-allyesconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.2.0 make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

>> arch/arm64/boot/dts/qcom/sdm845-mtp.dts:10:10: fatal error: dt-bindings/regulator/qcom,rpmh-regulator.h: No such file or directory
    #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   compilation terminated.

vim +10 arch/arm64/boot/dts/qcom/sdm845-mtp.dts

     9	
  > 10	#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
    11	#include "sdm845.dtsi"
    12	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 6d651f314193..1db4b9735e70 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -7,6 +7,7 @@ 
 
 /dts-v1/;
 
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
 
 / {
@@ -20,6 +21,451 @@ 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode =
+				<RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pmi8998-rpmh-regulators {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	pm8005-rpmh-regulators {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
 };
 
 &i2c10 {