Message ID | 1537194305-9243-3-git-send-email-manish.narani@xilinx.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Series | EDAC: Enhancements to Synopsys EDAC driver | expand |
On Mon, Sep 17, 2018 at 07:55:00PM +0530, Manish Narani wrote: > Add platform specific structures, so that we can add different IP > support later using quirks. > > Signed-off-by: Manish Narani <manish.narani@xilinx.com> > --- > drivers/edac/synopsys_edac.c | 91 +++++++++++++++++++++++++++++++------------- > 1 file changed, 65 insertions(+), 26 deletions(-) ... > @@ -423,6 +465,7 @@ static void edac_mc_init(struct mem_ctl_info *mci, > */ > static int synps_edac_mc_probe(struct platform_device *pdev) > { > + const struct synps_platform_data *p_data; > struct edac_mc_layer layers[2]; > struct synps_edac_priv *priv; > struct mem_ctl_info *mci; > @@ -435,7 +478,8 @@ static int synps_edac_mc_probe(struct platform_device *pdev) > if (IS_ERR(baseaddr)) > return PTR_ERR(baseaddr); > > - if (!edac_get_eccstate(baseaddr)) { > + p_data = of_device_get_match_data(&pdev->dev); > + if (!(p_data->get_eccstate(baseaddr))) { From last review round: "Too many parentheses: if (!p_data->... is enough." So I'm going to stop reviewing this patchset until you go through the old review round again and make sure you've incorporated *all* review feedback and haven't forgotten some, like the one above.
Hi Boris, Thanks for your continuous guidance. > -----Original Message----- > From: Borislav Petkov [mailto:bp@alien8.de] > Sent: Tuesday, September 18, 2018 1:25 PM > To: Manish Narani <MNARANI@xilinx.com> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; mchehab@kernel.org; > Michal Simek <michals@xilinx.com>; leoyang.li@nxp.com; > sudeep.holla@arm.com; amit.kucheria@linaro.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > edac@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH v7 2/7] edac: synps: Add platform specific structures for > ddrc controller > > On Mon, Sep 17, 2018 at 07:55:00PM +0530, Manish Narani wrote: > > Add platform specific structures, so that we can add different IP > > support later using quirks. > > > > Signed-off-by: Manish Narani <manish.narani@xilinx.com> > > --- > > drivers/edac/synopsys_edac.c | 91 > > +++++++++++++++++++++++++++++++------------- > > 1 file changed, 65 insertions(+), 26 deletions(-) > > ... > > > @@ -423,6 +465,7 @@ static void edac_mc_init(struct mem_ctl_info *mci, > > */ > > static int synps_edac_mc_probe(struct platform_device *pdev) { > > + const struct synps_platform_data *p_data; > > struct edac_mc_layer layers[2]; > > struct synps_edac_priv *priv; > > struct mem_ctl_info *mci; > > @@ -435,7 +478,8 @@ static int synps_edac_mc_probe(struct > platform_device *pdev) > > if (IS_ERR(baseaddr)) > > return PTR_ERR(baseaddr); > > > > - if (!edac_get_eccstate(baseaddr)) { > > + p_data = of_device_get_match_data(&pdev->dev); > > + if (!(p_data->get_eccstate(baseaddr))) { > > From last review round: > > "Too many parentheses: > > if (!p_data->... > > is enough." > > So I'm going to stop reviewing this patchset until you go through the old review > round again and make sure you've incorporated *all* review feedback and > haven't forgotten some, like the one above. > Okay, I will double check again for the comments from previous review and rectify the same in v8. Can you please review the remaining patches so that I can accommodate any changes for them in v8? I regret the inconvenience caused to you in this. Thanks, Manish
On Wed, Sep 19, 2018 at 05:14:51AM +0000, Manish Narani wrote: > > So I'm going to stop reviewing this patchset until you go through the old review > > round again and make sure you've incorporated *all* review feedback and > > haven't forgotten some, like the one above. > > > Okay, I will double check again for the comments from previous review > and rectify the same in v8. Can you please review the remaining > patches so that I can accommodate any changes for them in v8? Read again what I said: "I'm going to stop reviewing this patchset until you go through the old review..." You can go through the old review and check your v7. If you haven't missed anything, lemme know and I'll look at the rest. If you have, I'll wait for v8.
Hi Boris, > -----Original Message----- > From: Borislav Petkov [mailto:bp@alien8.de] > Sent: Wednesday, September 19, 2018 4:46 PM > To: Manish Narani <MNARANI@xilinx.com> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; mchehab@kernel.org; > Michal Simek <michals@xilinx.com>; leoyang.li@nxp.com; > sudeep.holla@arm.com; amit.kucheria@linaro.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > edac@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH v7 2/7] edac: synps: Add platform specific structures for > ddrc controller > > On Wed, Sep 19, 2018 at 05:14:51AM +0000, Manish Narani wrote: > > > So I'm going to stop reviewing this patchset until you go through > > > the old review round again and make sure you've incorporated *all* > > > review feedback and haven't forgotten some, like the one above. > > > > > Okay, I will double check again for the comments from previous review > > and rectify the same in v8. Can you please review the remaining > > patches so that I can accommodate any changes for them in v8? > > Read again what I said: "I'm going to stop reviewing this patchset until you go > through the old review..." You can go through the old review and check your v7. > If you haven't missed anything, lemme know and I'll look at the rest. Apart from this one, I have covered all the comments from the previous review. Thanks, Manish
On Wed, Sep 19, 2018 at 01:33:58PM +0000, Manish Narani wrote:
> Apart from this one, I have covered all the comments from the previous review.
Are you sure?
Let's see. I said:
| Kill all that "function pointer" fluff. Here's how I've changed it:
|
| /**
| * struct synps_platform_data - synps platform data structure
| * @edac_geterror_info: edac error info
| * @edac_get_mtype: get mtype
| * @edac_get_dtype: get dtype
| * @edac_get_eccstate: get ECC state
^^^^^^^^^^^^^
This is supposed to denote that this function returns whether ECC
checking is enabled on the controller or not.
Your patch has:
+ * struct synps_platform_data - synps platform data structure.
+ * @geterror_info: Get error info.
+ * @get_mtype: Get mtype.
+ * @get_dtype: Get dtype.
+ * @get_eccstate: Get eccstate.
So what is "eccstate"? Is it a struct or a variable or ...?
Do you see my point?
I know, it is a small thing but documenting our code properly is
something which people would be thanking us for. Even you will be
thanking yourself when you look at this months from now after having
forgotten it all.
Please check the rest of your additions for similar discrepancies.
Thanks.
There's more: I said: > > @@ -370,12 +398,12 @@ static int synps_edac_init_csrows(struct mem_ctl_info *mci) > That function returns 0 unconditionally. Make it a void in a prepatch. But you've lumped this change together with a bunch more. Maybe my request wasn't clear so let me rephrase it: That function returns 0 unconditionally. Make it a void in a *separate* prepatch. Ok?
Hi Boris, Thanks for the review. > -----Original Message----- > From: Borislav Petkov [mailto:bp@alien8.de] > Sent: Friday, September 21, 2018 2:37 PM > To: Manish Narani <MNARANI@xilinx.com> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; mchehab@kernel.org; > Michal Simek <michals@xilinx.com>; leoyang.li@nxp.com; > sudeep.holla@arm.com; amit.kucheria@linaro.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > edac@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH v7 2/7] edac: synps: Add platform specific structures for > ddrc controller > > On Wed, Sep 19, 2018 at 01:33:58PM +0000, Manish Narani wrote: > > Apart from this one, I have covered all the comments from the previous > review. > > Are you sure? > > Let's see. I said: > > | Kill all that "function pointer" fluff. Here's how I've changed it: > | > | /** > | * struct synps_platform_data - synps platform data structure > | * @edac_geterror_info: edac error info > | * @edac_get_mtype: get mtype > | * @edac_get_dtype: get dtype > | * @edac_get_eccstate: get ECC state > ^^^^^^^^^^^^^ > > This is supposed to denote that this function returns whether ECC checking is > enabled on the controller or not. > > Your patch has: > > + * struct synps_platform_data - synps platform data structure. > + * @geterror_info: Get error info. > + * @get_mtype: Get mtype. > + * @get_dtype: Get dtype. > + * @get_eccstate: Get eccstate. > > So what is "eccstate"? Is it a struct or a variable or ...? > > Do you see my point? > > I know, it is a small thing but documenting our code properly is something > which people would be thanking us for. Even you will be thanking yourself when > you look at this months from now after having forgotten it all. > > Please check the rest of your additions for similar discrepancies. Okay sure. Will be rectified in v8. Thanks, Manish
Hi Boris, Thanks for the review. > -----Original Message----- > From: Borislav Petkov [mailto:bp@alien8.de] > Sent: Friday, September 21, 2018 2:46 PM > To: Manish Narani <MNARANI@xilinx.com> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; mchehab@kernel.org; > Michal Simek <michals@xilinx.com>; leoyang.li@nxp.com; > sudeep.holla@arm.com; amit.kucheria@linaro.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > edac@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH v7 2/7] edac: synps: Add platform specific structures for > ddrc controller > > There's more: > > I said: > > > > @@ -370,12 +398,12 @@ static int synps_edac_init_csrows(struct > > > mem_ctl_info *mci) > > > That function returns 0 unconditionally. Make it a void in a prepatch. > > But you've lumped this change together with a bunch more. Maybe my request > wasn't clear so let me rephrase it: > > That function returns 0 unconditionally. Make it a void in a *separate* > prepatch. > > Ok? Yes, okay.
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index 4963930..eb458e5 100644 --- a/drivers/edac/synopsys_edac.c +++ b/drivers/edac/synopsys_edac.c @@ -22,6 +22,8 @@ #include <linux/edac.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> #include "edac_module.h" @@ -130,6 +132,7 @@ struct synps_ecc_status { * @baseaddr: Base address of the DDR controller. * @message: Buffer for framing the event specific info. * @stat: ECC status information. + * @p_data: Platform data * @ce_cnt: Correctable Error count. * @ue_cnt: Uncorrectable Error count. */ @@ -137,21 +140,41 @@ struct synps_edac_priv { void __iomem *baseaddr; char message[SYNPS_EDAC_MSG_SIZE]; struct synps_ecc_status stat; + const struct synps_platform_data *p_data; u32 ce_cnt; u32 ue_cnt; }; /** - * edac_geterror_info - Get the current ECC error info. - * @base: Base address of the DDR memory controller. - * @p: Synopsys ECC status structure. + * struct synps_platform_data - synps platform data structure. + * @geterror_info: Get error info. + * @get_mtype: Get mtype. + * @get_dtype: Get dtype. + * @get_eccstate: Get eccstate. + * @quirks: To differentiate IPs. + */ +struct synps_platform_data { + int (*geterror_info)(struct synps_edac_priv *priv); + enum mem_type (*get_mtype)(const void __iomem *base); + enum dev_type (*get_dtype)(const void __iomem *base); + bool (*get_eccstate)(void __iomem *base); + int quirks; +}; + +/** + * zynq_geterror_info - Get the current ECC error info. + * @priv: DDR memory controller private instance data. * * Return: one if there is no error otherwise returns zero. */ -static int edac_geterror_info(void __iomem *base, - struct synps_ecc_status *p) +static int zynq_geterror_info(struct synps_edac_priv *priv) { + struct synps_ecc_status *p; u32 regval, clearval = 0; + void __iomem *base; + + base = priv->baseaddr; + p = &priv->stat; regval = readl(base + STAT_OFST); if (!regval) @@ -230,17 +253,18 @@ static void edac_handle_error(struct mem_ctl_info *mci, } /** - * edac_check - Check controller for ECC errors. + * edac_error_check - Check controller for ECC errors. * @mci: EDAC memory controller instance. * * Used to check and post ECC errors. Called by the polling thread. */ -static void edac_check(struct mem_ctl_info *mci) +static void edac_error_check(struct mem_ctl_info *mci) { struct synps_edac_priv *priv = mci->pvt_info; + const struct synps_platform_data *p_data = priv->p_data; int status; - status = edac_geterror_info(priv->baseaddr, &priv->stat); + status = p_data->geterror_info(priv); if (status) return; @@ -253,7 +277,7 @@ static void edac_check(struct mem_ctl_info *mci) } /** - * edac_get_dtype - Return the controller memory width. + * zynq_get_dtype - Return the controller memory width. * @base: DDR memory controller base address. * * Get the EDAC device type width appropriate for the current controller @@ -261,7 +285,7 @@ static void edac_check(struct mem_ctl_info *mci) * * Return: a device type width enumeration. */ -static enum dev_type edac_get_dtype(const void __iomem *base) +static enum dev_type zynq_get_dtype(const void __iomem *base) { enum dev_type dt; u32 width; @@ -284,20 +308,20 @@ static enum dev_type edac_get_dtype(const void __iomem *base) } /** - * edac_get_eccstate - Return the controller ECC enable/disable status. + * zynq_get_eccstate - Return the controller ECC enable/disable status. * @base: DDR memory controller base address. * * Get the ECC enable/disable status for the controller. * * Return: a ECC status boolean i.e true/false - enabled/disabled. */ -static bool edac_get_eccstate(void __iomem *base) +static bool zynq_get_eccstate(void __iomem *base) { bool state = false; enum dev_type dt; u32 ecctype; - dt = edac_get_dtype(base); + dt = zynq_get_dtype(base); if (dt == DEV_UNKNOWN) return state; @@ -323,7 +347,7 @@ static u32 edac_get_memsize(void) } /** - * edac_get_mtype - Returns controller memory type. + * zynq_get_mtype - Returns controller memory type. * @base: Synopsys ECC status structure. * * Get the EDAC memory type appropriate for the current controller @@ -331,7 +355,7 @@ static u32 edac_get_memsize(void) * * Return: a memory type enumeration. */ -static enum mem_type edac_get_mtype(const void __iomem *base) +static enum mem_type zynq_get_mtype(const void __iomem *base) { enum mem_type mt; u32 memtype; @@ -356,11 +380,14 @@ static enum mem_type edac_get_mtype(const void __iomem *base) static void edac_init_csrows(struct mem_ctl_info *mci) { struct synps_edac_priv *priv = mci->pvt_info; + const struct synps_platform_data *p_data; struct csrow_info *csi; struct dimm_info *dimm; u32 size, row; int j; + p_data = priv->p_data; + for (row = 0; row < mci->nr_csrows; row++) { csi = mci->csrows[row]; size = edac_get_memsize(); @@ -368,10 +395,10 @@ static void edac_init_csrows(struct mem_ctl_info *mci) for (j = 0; j < csi->nr_channels; j++) { dimm = csi->channels[j]->dimm; dimm->edac_mode = EDAC_FLAG_SECDED; - dimm->mtype = edac_get_mtype(priv->baseaddr); + dimm->mtype = p_data->get_mtype(priv->baseaddr); dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels; dimm->grain = SYNPS_EDAC_ERR_GRAIN; - dimm->dtype = edac_get_dtype(priv->baseaddr); + dimm->dtype = p_data->get_dtype(priv->baseaddr); } } } @@ -406,12 +433,27 @@ static void edac_mc_init(struct mem_ctl_info *mci, mci->mod_name = SYNPS_EDAC_MOD_VER; edac_op_state = EDAC_OPSTATE_POLL; - mci->edac_check = edac_check; + mci->edac_check = edac_error_check; mci->ctl_page_to_phys = NULL; edac_init_csrows(mci); } +static const struct synps_platform_data zynq_edac_def = { + .geterror_info = zynq_geterror_info, + .get_mtype = zynq_get_mtype, + .get_dtype = zynq_get_dtype, + .get_eccstate = zynq_get_eccstate, + .quirks = 0, +}; + +static const struct of_device_id synps_edac_match[] = { + { .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def }, + { /* end of table */ } +}; + +MODULE_DEVICE_TABLE(of, synps_edac_match); + /** * synps_edac_mc_probe - Check controller and bind driver. * @pdev: platform_device struct. @@ -423,6 +465,7 @@ static void edac_mc_init(struct mem_ctl_info *mci, */ static int synps_edac_mc_probe(struct platform_device *pdev) { + const struct synps_platform_data *p_data; struct edac_mc_layer layers[2]; struct synps_edac_priv *priv; struct mem_ctl_info *mci; @@ -435,7 +478,8 @@ static int synps_edac_mc_probe(struct platform_device *pdev) if (IS_ERR(baseaddr)) return PTR_ERR(baseaddr); - if (!edac_get_eccstate(baseaddr)) { + p_data = of_device_get_match_data(&pdev->dev); + if (!(p_data->get_eccstate(baseaddr))) { edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n"); return -ENXIO; } @@ -457,6 +501,8 @@ static int synps_edac_mc_probe(struct platform_device *pdev) priv = mci->pvt_info; priv->baseaddr = baseaddr; + priv->p_data = p_data; + edac_mc_init(mci, pdev); rc = edac_mc_add_mc(mci); @@ -495,13 +541,6 @@ static int synps_edac_mc_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id synps_edac_match[] = { - { .compatible = "xlnx,zynq-ddrc-a05", }, - { /* end of table */ } -}; - -MODULE_DEVICE_TABLE(of, synps_edac_match); - static struct platform_driver synps_edac_mc_driver = { .driver = { .name = "synopsys-edac",
Add platform specific structures, so that we can add different IP support later using quirks. Signed-off-by: Manish Narani <manish.narani@xilinx.com> --- drivers/edac/synopsys_edac.c | 91 +++++++++++++++++++++++++++++++------------- 1 file changed, 65 insertions(+), 26 deletions(-)