| Message ID | 20181004212747.6301-1-logang@deltatee.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Copy Offload in NVMe Fabrics with P2P PCI Memory | expand |
On Thu, Oct 04, 2018 at 03:27:34PM -0600, Logan Gunthorpe wrote: > This is v9 for the p2pdma patch set. It has some substantial changes > from the previous version. Essentially, the last patch has changed > based on information from Sagi that the P2P memory can be assigned > per namespace instead of globally. To that end, I've added a > radix tree that stores the p2p devices to use for each namespace and > a lookup will be done on that before allocating the memory. > > This has some knock on effects of simplifying the requirements > from the p2pdma code and so we drop all the client list code seeing > we don't need to worry about selecting a P2P device that works > with every namespace at once; only each namespace independantly. > Thus, Patch 1, 6 and 13 have significant changes. However, > I think the removal of the client list code will be generally > appreciated based on the feedback I've gotten from Christian. > > As usual, a git repo of the branch is available here: > > https://github.com/sbates130272/linux-p2pmem pci-p2p-v9 > > Thanks, > > Logan > > -- > > Changes in v9: > * Rebased on v4.19-rc6 > * Droped pci_p2pdma_add_client(), pci_p2pdma_remove_client() and > pci_p2pdma_client_list_free(), and reworked pci_p2pdma_distance() and > pci_p2pmem_find() to take simple arrays instead of list_heads. > * Updated the documentation to match > * Reworked the nvmet code to have a configfs attribute per namespace > instead of per port. Then each namespace has it's own P2P device > stored in a radix-tree in the controller (it can't be stored in > the nvme_ns structure seeing it needs to be unique per controller). > * Dropped the 'sq' argument in nvmet_req_alloc_sgl() seeing I've noticed > it is now available in the nvmet_req structure. > * Collected Keith's reviewed-by tags (however, I have not applied his > tag to the last patch seeing I think it has changed too much since > his review). > > Changes in v8: > > * Added a couple of comments to address Bart's feedback and > removed the bogus call to percpu_ref_switch_to_atomic_sync() > > Changes in v7: > > * Rebased on v4.19-rc5 > > * Fixed up commit message of patch 7 that was no longer accurate. (as > pointed out by Jens) > * Change the configfs to not use "auto" or "none" and instead just > use a 0/1/<pci_dev> (or boolean). This matches the existing > nvme-target configfs booleans. (Per Bjorn) > * A handful of other minor changes and edits that were noticed by Bjorn > * Collected Acks from Bjorn > > Changes in v6: > > * Rebased on v4.19-rc3 > > * Remove the changes to the common submit_bio() path and instead > set REQ_NOMERGE in the NVME target driver, when appropriate. > Per discussions with Jens and Christoph. > > * Some minor grammar changes in the documentation as spotted by Randy. > > Changes in v5: > > * Rebased on v4.19-rc1 > > * Drop changing ACS settings in this patchset. Now, the code > will only allow P2P transactions between devices whos > downstream ports do not restrict P2P TLPs. > > * Drop the REQ_PCI_P2PDMA block flag and instead use > is_pci_p2pdma_page() to tell if a request is P2P or not. In that > case we check for queue support and enforce using REQ_NOMERGE. > Per feedback from Christoph. > > * Drop the pci_p2pdma_unmap_sg() function as it was empty and only > there for symmetry and compatibility with dma_unmap_sg. Per feedback > from Christoph. > > * Split off the logic to handle enabling P2P in NVMe fabrics' configfs > into specific helpers in the p2pdma code. Per feedback from Christoph. > > * A number of other minor cleanups and fixes as pointed out by > Christoph and others. > > Changes in v4: > > * Change the original upstream_bridges_match() function to > upstream_bridge_distance() which calculates the distance between two > devices as long as they are behind the same root port. This should > address Bjorn's concerns that the code was to focused on > being behind a single switch. > > * The disable ACS function now disables ACS for all bridge ports instead > of switch ports (ie. those that had two upstream_bridge ports). > > * Change the pci_p2pmem_alloc_sgl() and pci_p2pmem_free_sgl() > API to be more like sgl_alloc() in that the alloc function returns > the allocated scatterlist and nents is not required bythe free > function. > > * Moved the new documentation into the driver-api tree as requested > by Jonathan > > * Add SGL alloc and free helpers in the nvmet code so that the > individual drivers can share the code that allocates P2P memory. > As requested by Christoph. > > * Cleanup the nvmet_p2pmem_store() function as Christoph > thought my first attempt was ugly. > > * Numerous commit message and comment fix-ups > > Changes in v3: > > * Many more fixes and minor cleanups that were spotted by Bjorn > > * Additional explanation of the ACS change in both the commit message > and Kconfig doc. Also, the code that disables the ACS bits is surrounded > explicitly by an #ifdef > > * Removed the flag we added to rdma_rw_ctx() in favour of using > is_pci_p2pdma_page(), as suggested by Sagi. > > * Adjust pci_p2pmem_find() so that it prefers P2P providers that > are closest to (or the same as) the clients using them. In cases > of ties, the provider is randomly chosen. > > * Modify the NVMe Target code so that the PCI device name of the provider > may be explicitly specified, bypassing the logic in pci_p2pmem_find(). > (Note: it's still enforced that the provider must be behind the > same switch as the clients). > > * As requested by Bjorn, added documentation for driver writers. > > > Changes in v2: > > * Renamed everything to 'p2pdma' per the suggestion from Bjorn as well > as a bunch of cleanup and spelling fixes he pointed out in the last > series. > > * To address Alex's ACS concerns, we change to a simpler method of > just disabling ACS behind switches for any kernel that has > CONFIG_PCI_P2PDMA. > > * We also reject using devices that employ 'dma_virt_ops' which should > fairly simply handle Jason's concerns that this work might break with > the HFI, QIB and rxe drivers that use the virtual ops to implement > their own special DMA operations. > > -- > > This is a continuation of our work to enable using Peer-to-Peer PCI > memory in the kernel with initial support for the NVMe fabrics target > subsystem. Many thanks go to Christoph Hellwig who provided valuable > feedback to get these patches to where they are today. > > The concept here is to use memory that's exposed on a PCI BAR as > data buffers in the NVMe target code such that data can be transferred > from an RDMA NIC to the special memory and then directly to an NVMe > device avoiding system memory entirely. The upside of this is better > QoS for applications running on the CPU utilizing memory and lower > PCI bandwidth required to the CPU (such that systems could be designed > with fewer lanes connected to the CPU). > > Due to these trade-offs we've designed the system to only enable using > the PCI memory in cases where the NIC, NVMe devices and memory are all > behind the same PCI switch hierarchy. This will mean many setups that > could likely work well will not be supported so that we can be more > confident it will work and not place any responsibility on the user to > understand their topology. (We chose to go this route based on feedback > we received at the last LSF). Future work may enable these transfers > using a white list of known good root complexes. However, at this time, > there is no reliable way to ensure that Peer-to-Peer transactions are > permitted between PCI Root Ports. > > For PCI P2P DMA transfers to work in this situation the ACS bits > must be disabled on the downstream ports (DSPs) for all devices > involved in the transfer. This can be done using the "disable_acs_redir" > PCI kernel command line option which was introduced in v4.19. > > In order to enable PCI P2P functionality, we introduce a few new PCI > functions such that a driver can register P2P memory with the system. > Struct pages are created for this memory using devm_memremap_pages() > and the PCI bus offset is stored in the corresponding pagemap structure. > > Another set of functions allow a client driver to create a list of > client devices that will be used in a given P2P transactions and then > use that list to find any P2P memory that is supported by all the > client devices. > > In the block layer, we also introduce a flag for a request queue > to indicate a given queue supports targeting P2P memory. The driver > submitting bios must ensure that the queue supports P2P before > attempting to submit BIOs backed by P2P memory. Also, P2P requests > are marked to not be merged seeing a non-homogenous request would > complicate the DMA mapping requirements. > > In the PCI NVMe driver, we modify the existing CMB support to utilize > the new PCI P2P memory infrastructure and also add support for P2P > memory in its request queue. When a P2P request is received it uses the > pci_p2pmem_map_sg() function which applies the necessary transformation > to get the corrent pci_bus_addr_t for the DMA transactions. > > In the RDMA core, we also adjust rdma_rw_ctx_init() and > rdma_rw_ctx_destroy() to take a flags argument which indicates whether > to use the PCI P2P mapping functions or not. To avoid odd RDMA devices > that don't use the proper DMA infrastructure this code rejects using > any device that employs the virt_dma_ops implementation. > > Finally, in the NVMe fabrics target port we introduce a new > configuration attribute: 'p2pmem'. When set to a true boolean, the port > will attempt to find P2P memory supported by the RDMA NIC and all namespaces. > It may also be set to a PCI device name to select a specific P2P > memory to use. If supported memory is found, it will be used in all IO > transfers. And if a port is using P2P memory, adding new namespaces that > are not supported by that memory will fail. > > These patches have been tested on a number of Intel based systems and > for a variety of RDMA NICs (Mellanox, Broadcomm, Chelsio) and NVMe > SSDs (Intel, Seagate, Samsung) and p2pdma devices (Eideticom, > Microsemi, Chelsio and Everspin) using switches from both Microsemi > and Broadcomm. > > -- > > Logan Gunthorpe (13): > PCI/P2PDMA: Support peer-to-peer memory > PCI/P2PDMA: Add sysfs group to display p2pmem stats > PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset > PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers > docs-rst: Add a new directory for PCI documentation > PCI/P2PDMA: Add P2P DMA driver writer's documentation > block: Add PCI P2P flag for request queue and check support for > requests > IB/core: Ensure we map P2P memory correctly in > rdma_rw_ctx_[init|destroy]() > nvme-pci: Use PCI p2pmem subsystem to manage the CMB > nvme-pci: Add support for P2P memory in requests > nvme-pci: Add a quirk for a pseudo CMB > nvmet: Introduce helper functions to allocate and free request SGLs > nvmet: Optionally use PCI P2P memory > > Documentation/ABI/testing/sysfs-bus-pci | 24 + > Documentation/driver-api/index.rst | 2 +- > Documentation/driver-api/pci/index.rst | 21 + > Documentation/driver-api/pci/p2pdma.rst | 145 ++++ > Documentation/driver-api/{ => pci}/pci.rst | 0 > drivers/infiniband/core/rw.c | 11 +- > drivers/nvme/host/core.c | 4 + > drivers/nvme/host/nvme.h | 8 + > drivers/nvme/host/pci.c | 121 +-- > drivers/nvme/target/configfs.c | 45 ++ > drivers/nvme/target/core.c | 180 +++++ > drivers/nvme/target/io-cmd-bdev.c | 3 + > drivers/nvme/target/nvmet.h | 17 + > drivers/nvme/target/rdma.c | 22 +- > drivers/pci/Kconfig | 17 + > drivers/pci/Makefile | 1 + > drivers/pci/p2pdma.c | 809 +++++++++++++++++++++ > include/linux/blkdev.h | 3 + > include/linux/memremap.h | 6 + > include/linux/mm.h | 18 + > include/linux/pci-p2pdma.h | 114 +++ > include/linux/pci.h | 4 + > 22 files changed, 1521 insertions(+), 54 deletions(-) > create mode 100644 Documentation/driver-api/pci/index.rst > create mode 100644 Documentation/driver-api/pci/p2pdma.rst > rename Documentation/driver-api/{ => pci}/pci.rst (100%) > create mode 100644 drivers/pci/p2pdma.c > create mode 100644 include/linux/pci-p2pdma.h I added the reviewed-by tags from Christoph, Jens' ack on the blkdev.h change, and applied these to pci/peer-to-peer with the intent of merging these for v4.20. I gave up on waiting for an ack for the memremap.h and mm.h changes. I dropped the "nvme-pci: Add a quirk for a pseudo CMB" quirk because of Christoph's objection. After this is all merged, I won't need to be involved, and you and the NVMe folks can hash that out. If there are updates to "nvmet: Optionally use PCI P2P memory" based on Sagi's comments, send an incremental patch and I'll fold them in. Bjorn
On 2018-10-10 2:19 p.m., Bjorn Helgaas wrote: > I added the reviewed-by tags from Christoph, Jens' ack on the blkdev.h > change, and applied these to pci/peer-to-peer with the intent of > merging these for v4.20. > > I gave up on waiting for an ack for the memremap.h and mm.h changes. > > I dropped the "nvme-pci: Add a quirk for a pseudo CMB" quirk because > of Christoph's objection. After this is all merged, I won't need to > be involved, and you and the NVMe folks can hash that out. > > If there are updates to "nvmet: Optionally use PCI P2P memory" based > on Sagi's comments, send an incremental patch and I'll fold them in. Thanks for picking this up. However, I hate to throw a wrench in the works, but I had a v10[1] queued up because kbuild found some problems with the series over the weekend. I can send v10 off right away if you want to just replace it in your branch or, if you'd like, I can generate some incremental patches. Let me know which you'd prefer. Thanks, Logan [1] https://github.com/sbates130272/linux-p2pmem pci-p2p-v10
On Wed, Oct 10, 2018 at 05:03:33PM -0600, Logan Gunthorpe wrote: > > > On 2018-10-10 2:19 p.m., Bjorn Helgaas wrote: > > I added the reviewed-by tags from Christoph, Jens' ack on the blkdev.h > > change, and applied these to pci/peer-to-peer with the intent of > > merging these for v4.20. > > > > I gave up on waiting for an ack for the memremap.h and mm.h changes. > > > > I dropped the "nvme-pci: Add a quirk for a pseudo CMB" quirk because > > of Christoph's objection. After this is all merged, I won't need to > > be involved, and you and the NVMe folks can hash that out. > > > > If there are updates to "nvmet: Optionally use PCI P2P memory" based > > on Sagi's comments, send an incremental patch and I'll fold them in. > > Thanks for picking this up. However, I hate to throw a wrench in the > works, but I had a v10[1] queued up because kbuild found some problems > with the series over the weekend. I can send v10 off right away if you > want to just replace it in your branch or, if you'd like, I can generate > some incremental patches. Let me know which you'd prefer. I applied the updates from your v10 to my pci/peer-to-peer branch. > [1] https://github.com/sbates130272/linux-p2pmem pci-p2p-v10
On 2018-10-10 9:18 p.m., Bjorn Helgaas wrote:
> I applied the updates from your v10 to my pci/peer-to-peer branch.
Perfect, thanks!
Logan
This is v9 for the p2pdma patch set. It has some substantial changes from the previous version. Essentially, the last patch has changed based on information from Sagi that the P2P memory can be assigned per namespace instead of globally. To that end, I've added a radix tree that stores the p2p devices to use for each namespace and a lookup will be done on that before allocating the memory. This has some knock on effects of simplifying the requirements from the p2pdma code and so we drop all the client list code seeing we don't need to worry about selecting a P2P device that works with every namespace at once; only each namespace independantly. Thus, Patch 1, 6 and 13 have significant changes. However, I think the removal of the client list code will be generally appreciated based on the feedback I've gotten from Christian. As usual, a git repo of the branch is available here: https://github.com/sbates130272/linux-p2pmem pci-p2p-v9 Thanks, Logan -- Changes in v9: * Rebased on v4.19-rc6 * Droped pci_p2pdma_add_client(), pci_p2pdma_remove_client() and pci_p2pdma_client_list_free(), and reworked pci_p2pdma_distance() and pci_p2pmem_find() to take simple arrays instead of list_heads. * Updated the documentation to match * Reworked the nvmet code to have a configfs attribute per namespace instead of per port. Then each namespace has it's own P2P device stored in a radix-tree in the controller (it can't be stored in the nvme_ns structure seeing it needs to be unique per controller). * Dropped the 'sq' argument in nvmet_req_alloc_sgl() seeing I've noticed it is now available in the nvmet_req structure. * Collected Keith's reviewed-by tags (however, I have not applied his tag to the last patch seeing I think it has changed too much since his review). Changes in v8: * Added a couple of comments to address Bart's feedback and removed the bogus call to percpu_ref_switch_to_atomic_sync() Changes in v7: * Rebased on v4.19-rc5 * Fixed up commit message of patch 7 that was no longer accurate. (as pointed out by Jens) * Change the configfs to not use "auto" or "none" and instead just use a 0/1/<pci_dev> (or boolean). This matches the existing nvme-target configfs booleans. (Per Bjorn) * A handful of other minor changes and edits that were noticed by Bjorn * Collected Acks from Bjorn Changes in v6: * Rebased on v4.19-rc3 * Remove the changes to the common submit_bio() path and instead set REQ_NOMERGE in the NVME target driver, when appropriate. Per discussions with Jens and Christoph. * Some minor grammar changes in the documentation as spotted by Randy. Changes in v5: * Rebased on v4.19-rc1 * Drop changing ACS settings in this patchset. Now, the code will only allow P2P transactions between devices whos downstream ports do not restrict P2P TLPs. * Drop the REQ_PCI_P2PDMA block flag and instead use is_pci_p2pdma_page() to tell if a request is P2P or not. In that case we check for queue support and enforce using REQ_NOMERGE. Per feedback from Christoph. * Drop the pci_p2pdma_unmap_sg() function as it was empty and only there for symmetry and compatibility with dma_unmap_sg. Per feedback from Christoph. * Split off the logic to handle enabling P2P in NVMe fabrics' configfs into specific helpers in the p2pdma code. Per feedback from Christoph. * A number of other minor cleanups and fixes as pointed out by Christoph and others. Changes in v4: * Change the original upstream_bridges_match() function to upstream_bridge_distance() which calculates the distance between two devices as long as they are behind the same root port. This should address Bjorn's concerns that the code was to focused on being behind a single switch. * The disable ACS function now disables ACS for all bridge ports instead of switch ports (ie. those that had two upstream_bridge ports). * Change the pci_p2pmem_alloc_sgl() and pci_p2pmem_free_sgl() API to be more like sgl_alloc() in that the alloc function returns the allocated scatterlist and nents is not required bythe free function. * Moved the new documentation into the driver-api tree as requested by Jonathan * Add SGL alloc and free helpers in the nvmet code so that the individual drivers can share the code that allocates P2P memory. As requested by Christoph. * Cleanup the nvmet_p2pmem_store() function as Christoph thought my first attempt was ugly. * Numerous commit message and comment fix-ups Changes in v3: * Many more fixes and minor cleanups that were spotted by Bjorn * Additional explanation of the ACS change in both the commit message and Kconfig doc. Also, the code that disables the ACS bits is surrounded explicitly by an #ifdef * Removed the flag we added to rdma_rw_ctx() in favour of using is_pci_p2pdma_page(), as suggested by Sagi. * Adjust pci_p2pmem_find() so that it prefers P2P providers that are closest to (or the same as) the clients using them. In cases of ties, the provider is randomly chosen. * Modify the NVMe Target code so that the PCI device name of the provider may be explicitly specified, bypassing the logic in pci_p2pmem_find(). (Note: it's still enforced that the provider must be behind the same switch as the clients). * As requested by Bjorn, added documentation for driver writers. Changes in v2: * Renamed everything to 'p2pdma' per the suggestion from Bjorn as well as a bunch of cleanup and spelling fixes he pointed out in the last series. * To address Alex's ACS concerns, we change to a simpler method of just disabling ACS behind switches for any kernel that has CONFIG_PCI_P2PDMA. * We also reject using devices that employ 'dma_virt_ops' which should fairly simply handle Jason's concerns that this work might break with the HFI, QIB and rxe drivers that use the virtual ops to implement their own special DMA operations. -- This is a continuation of our work to enable using Peer-to-Peer PCI memory in the kernel with initial support for the NVMe fabrics target subsystem. Many thanks go to Christoph Hellwig who provided valuable feedback to get these patches to where they are today. The concept here is to use memory that's exposed on a PCI BAR as data buffers in the NVMe target code such that data can be transferred from an RDMA NIC to the special memory and then directly to an NVMe device avoiding system memory entirely. The upside of this is better QoS for applications running on the CPU utilizing memory and lower PCI bandwidth required to the CPU (such that systems could be designed with fewer lanes connected to the CPU). Due to these trade-offs we've designed the system to only enable using the PCI memory in cases where the NIC, NVMe devices and memory are all behind the same PCI switch hierarchy. This will mean many setups that could likely work well will not be supported so that we can be more confident it will work and not place any responsibility on the user to understand their topology. (We chose to go this route based on feedback we received at the last LSF). Future work may enable these transfers using a white list of known good root complexes. However, at this time, there is no reliable way to ensure that Peer-to-Peer transactions are permitted between PCI Root Ports. For PCI P2P DMA transfers to work in this situation the ACS bits must be disabled on the downstream ports (DSPs) for all devices involved in the transfer. This can be done using the "disable_acs_redir" PCI kernel command line option which was introduced in v4.19. In order to enable PCI P2P functionality, we introduce a few new PCI functions such that a driver can register P2P memory with the system. Struct pages are created for this memory using devm_memremap_pages() and the PCI bus offset is stored in the corresponding pagemap structure. Another set of functions allow a client driver to create a list of client devices that will be used in a given P2P transactions and then use that list to find any P2P memory that is supported by all the client devices. In the block layer, we also introduce a flag for a request queue to indicate a given queue supports targeting P2P memory. The driver submitting bios must ensure that the queue supports P2P before attempting to submit BIOs backed by P2P memory. Also, P2P requests are marked to not be merged seeing a non-homogenous request would complicate the DMA mapping requirements. In the PCI NVMe driver, we modify the existing CMB support to utilize the new PCI P2P memory infrastructure and also add support for P2P memory in its request queue. When a P2P request is received it uses the pci_p2pmem_map_sg() function which applies the necessary transformation to get the corrent pci_bus_addr_t for the DMA transactions. In the RDMA core, we also adjust rdma_rw_ctx_init() and rdma_rw_ctx_destroy() to take a flags argument which indicates whether to use the PCI P2P mapping functions or not. To avoid odd RDMA devices that don't use the proper DMA infrastructure this code rejects using any device that employs the virt_dma_ops implementation. Finally, in the NVMe fabrics target port we introduce a new configuration attribute: 'p2pmem'. When set to a true boolean, the port will attempt to find P2P memory supported by the RDMA NIC and all namespaces. It may also be set to a PCI device name to select a specific P2P memory to use. If supported memory is found, it will be used in all IO transfers. And if a port is using P2P memory, adding new namespaces that are not supported by that memory will fail. These patches have been tested on a number of Intel based systems and for a variety of RDMA NICs (Mellanox, Broadcomm, Chelsio) and NVMe SSDs (Intel, Seagate, Samsung) and p2pdma devices (Eideticom, Microsemi, Chelsio and Everspin) using switches from both Microsemi and Broadcomm. -- Logan Gunthorpe (13): PCI/P2PDMA: Support peer-to-peer memory PCI/P2PDMA: Add sysfs group to display p2pmem stats PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Add P2P DMA driver writer's documentation block: Add PCI P2P flag for request queue and check support for requests IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() nvme-pci: Use PCI p2pmem subsystem to manage the CMB nvme-pci: Add support for P2P memory in requests nvme-pci: Add a quirk for a pseudo CMB nvmet: Introduce helper functions to allocate and free request SGLs nvmet: Optionally use PCI P2P memory Documentation/ABI/testing/sysfs-bus-pci | 24 + Documentation/driver-api/index.rst | 2 +- Documentation/driver-api/pci/index.rst | 21 + Documentation/driver-api/pci/p2pdma.rst | 145 ++++ Documentation/driver-api/{ => pci}/pci.rst | 0 drivers/infiniband/core/rw.c | 11 +- drivers/nvme/host/core.c | 4 + drivers/nvme/host/nvme.h | 8 + drivers/nvme/host/pci.c | 121 +-- drivers/nvme/target/configfs.c | 45 ++ drivers/nvme/target/core.c | 180 +++++ drivers/nvme/target/io-cmd-bdev.c | 3 + drivers/nvme/target/nvmet.h | 17 + drivers/nvme/target/rdma.c | 22 +- drivers/pci/Kconfig | 17 + drivers/pci/Makefile | 1 + drivers/pci/p2pdma.c | 809 +++++++++++++++++++++ include/linux/blkdev.h | 3 + include/linux/memremap.h | 6 + include/linux/mm.h | 18 + include/linux/pci-p2pdma.h | 114 +++ include/linux/pci.h | 4 + 22 files changed, 1521 insertions(+), 54 deletions(-) create mode 100644 Documentation/driver-api/pci/index.rst create mode 100644 Documentation/driver-api/pci/p2pdma.rst rename Documentation/driver-api/{ => pci}/pci.rst (100%) create mode 100644 drivers/pci/p2pdma.c create mode 100644 include/linux/pci-p2pdma.h -- 2.19.0