diff mbox series

[v3,1/4] dt-bindings: hwlock: Document STM32 hwspinlock bindings

Message ID 20181112152342.6561-2-benjamin.gaignard@st.com (mailing list archive)
State New, archived
Headers show
Series Add support of STM32 hwspinlock | expand

Commit Message

Benjamin Gaignard Nov. 12, 2018, 3:23 p.m. UTC 
Add bindings for STM32 hardware spinlock device

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
version 3 :
- fix clock name in properties description
version 2 :
- change clock name from hwspinlock to hsem to be align with hardware
  documentation

 .../bindings/hwlock/st,stm32-hwspinlock.txt        | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt

Comments

Rob Herring (Arm) Nov. 13, 2018, 2:13 a.m. UTC | #1 
On Mon, Nov 12, 2018 at 04:23:39PM +0100, Benjamin Gaignard wrote:
> Add bindings for STM32 hardware spinlock device
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>

Linaro or ST? Please make the author email match.

> ---
> version 3 :
> - fix clock name in properties description
> version 2 :
> - change clock name from hwspinlock to hsem to be align with hardware
>   documentation
> 
>  .../bindings/hwlock/st,stm32-hwspinlock.txt        | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
> new file mode 100644
> index 000000000000..adf4f000ea3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
> @@ -0,0 +1,23 @@
> +STM32 Hardware Spinlock Device Binding
> +-------------------------------------
> +
> +Required properties :
> +- compatible : should be "st,stm32-hwspinlock".
> +- reg : the register address of hwspinlock.
> +- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
> +	hwlock, so the number of cells should be <1> here.
> +- clock-names : Must contain "hsem".
> +- clocks : Must contain a phandle entry for the clock in clock-names, see the
> +	common clock bindings.
> +
> +Please look at the generic hwlock binding for usage information for consumers,
> +"Documentation/devicetree/bindings/hwlock/hwlock.txt"
> +
> +Example of hwlock provider:
> +	hwspinlock@4c000000 {
> +		compatible = "st,stm32-hwspinlock";
> +		#hwlock-cells = <1>;
> +		reg = <0x4c000000 0x400>;
> +		clocks = <&rcc HSEM>;
> +		clock-names = "hsem";
> +	};
> -- 
> 2.15.0
>
Rob Herring (Arm) Nov. 13, 2018, 2:13 a.m. UTC | #2 
On Mon, 12 Nov 2018 16:23:39 +0100, Benjamin Gaignard wrote:
> Add bindings for STM32 hardware spinlock device
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
> version 3 :
> - fix clock name in properties description
> version 2 :
> - change clock name from hwspinlock to hsem to be align with hardware
>   documentation
> 
>  .../bindings/hwlock/st,stm32-hwspinlock.txt        | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Bjorn Andersson Nov. 13, 2018, 5:13 p.m. UTC | #3 
On Mon 12 Nov 18:13 PST 2018, Rob Herring wrote:

> On Mon, Nov 12, 2018 at 04:23:39PM +0100, Benjamin Gaignard wrote:
> > Add bindings for STM32 hardware spinlock device
> > 
> > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> 
> Linaro or ST? Please make the author email match.
> 

Thanks for the review Rob and thanks for spotting this.

@Benjamin, please resend the driver and dt-binding with matching author
and sob - or if you wrote this as ST and want to send it upstream as
Linaro add your new sob after the ST one.

Regards,
Bjorn

> > ---
> > version 3 :
> > - fix clock name in properties description
> > version 2 :
> > - change clock name from hwspinlock to hsem to be align with hardware
> >   documentation
> > 
> >  .../bindings/hwlock/st,stm32-hwspinlock.txt        | 23 ++++++++++++++++++++++
> >  1 file changed, 23 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
> > new file mode 100644
> > index 000000000000..adf4f000ea3d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
> > @@ -0,0 +1,23 @@
> > +STM32 Hardware Spinlock Device Binding
> > +-------------------------------------
> > +
> > +Required properties :
> > +- compatible : should be "st,stm32-hwspinlock".
> > +- reg : the register address of hwspinlock.
> > +- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
> > +	hwlock, so the number of cells should be <1> here.
> > +- clock-names : Must contain "hsem".
> > +- clocks : Must contain a phandle entry for the clock in clock-names, see the
> > +	common clock bindings.
> > +
> > +Please look at the generic hwlock binding for usage information for consumers,
> > +"Documentation/devicetree/bindings/hwlock/hwlock.txt"
> > +
> > +Example of hwlock provider:
> > +	hwspinlock@4c000000 {
> > +		compatible = "st,stm32-hwspinlock";
> > +		#hwlock-cells = <1>;
> > +		reg = <0x4c000000 0x400>;
> > +		clocks = <&rcc HSEM>;
> > +		clock-names = "hsem";
> > +	};
> > -- 
> > 2.15.0
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
new file mode 100644
index 000000000000..adf4f000ea3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
@@ -0,0 +1,23 @@ 
+STM32 Hardware Spinlock Device Binding
+-------------------------------------
+
+Required properties :
+- compatible : should be "st,stm32-hwspinlock".
+- reg : the register address of hwspinlock.
+- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
+	hwlock, so the number of cells should be <1> here.
+- clock-names : Must contain "hsem".
+- clocks : Must contain a phandle entry for the clock in clock-names, see the
+	common clock bindings.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example of hwlock provider:
+	hwspinlock@4c000000 {
+		compatible = "st,stm32-hwspinlock";
+		#hwlock-cells = <1>;
+		reg = <0x4c000000 0x400>;
+		clocks = <&rcc HSEM>;
+		clock-names = "hsem";
+	};