diff mbox series

[v1,02/11] clk: mediatek: add new member to mtk_pll_data

Message ID 20181106064206.17535-4-weiyi.lu@mediatek.com (mailing list archive)
State Superseded
Headers show
Series Mediatek MT8183 clock and scpsys support | expand

Commit Message

Weiyi Lu Nov. 6, 2018, 6:41 a.m. UTC
From: Owen Chen <owen.chen@mediatek.com>

1. pcwibits: The integer bits of pcw for plls is extend to 8 bits,
   add a variable to indicate this change and
   backward-compatible.
2. fmin: The pll freqency lower-bound is vary from 1GMhz to
   1.5Ghz, add a variable to indicate platform-dependent.

Signed-off-by: Owen Chen <owen.chen@mediatek.com>
---
 drivers/clk/mediatek/clk-mtk.h |  2 ++
 drivers/clk/mediatek/clk-pll.c | 10 +++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

Comments

Nicolas Boichat Nov. 13, 2018, 4:18 p.m. UTC | #1
On Mon, Nov 5, 2018 at 10:43 PM Weiyi Lu <weiyi.lu@mediatek.com> wrote:
>
> From: Owen Chen <owen.chen@mediatek.com>
>
> 1. pcwibits: The integer bits of pcw for plls is extend to 8 bits,
>    add a variable to indicate this change and
>    backward-compatible.
> 2. fmin: The pll freqency lower-bound is vary from 1GMhz to
>    1.5Ghz, add a variable to indicate platform-dependent.
>
> Signed-off-by: Owen Chen <owen.chen@mediatek.com>
> ---
>  drivers/clk/mediatek/clk-mtk.h |  2 ++
>  drivers/clk/mediatek/clk-pll.c | 10 +++++++---
>  2 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index f83c2bbb677e..1882221fe994 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -215,7 +215,9 @@ struct mtk_pll_data {
>         const struct clk_ops *ops;
>         u32 rst_bar_mask;
>         unsigned long fmax;
> +       unsigned long fmin;

Minor nit: I'd put fmin before fmax in the structure.

>         int pcwbits;
> +       int pcwibits;
>         uint32_t pcw_reg;
>         int pcw_shift;
>         const struct mtk_pll_div_table *div_table;
> diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
> index f54e4015b0b1..0ec2c62d9383 100644
> --- a/drivers/clk/mediatek/clk-pll.c
> +++ b/drivers/clk/mediatek/clk-pll.c

I'd add a note next to:
#define INTEGER_BITS            7
to say that this is the default, and can be overridden with pcwibits.

> @@ -69,11 +69,13 @@ static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
>  {
>         int pcwbits = pll->data->pcwbits;
>         int pcwfbits;
> +       int ibits;
>         u64 vco;
>         u8 c = 0;
>
>         /* The fractional part of the PLL divider. */
> -       pcwfbits = pcwbits > INTEGER_BITS ? pcwbits - INTEGER_BITS : 0;
> +       ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> +       pcwfbits = pcwbits > ibits ? pcwbits - ibits : 0;
>
>         vco = (u64)fin * pcw;
>
> @@ -138,9 +140,10 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
>  static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
>                 u32 freq, u32 fin)
>  {
> -       unsigned long fmin = 1000 * MHZ;
> +       unsigned long fmin = pll->data->fmin ? pll->data->fmin : 1000 * MHZ;

I'd put parentheses around (1000 * MHZ), to avoid the need to think
about precedence...

>         const struct mtk_pll_div_table *div_table = pll->data->div_table;
>         u64 _pcw;
> +       int ibits;
>         u32 val;
>
>         if (freq > pll->data->fmax)
> @@ -164,7 +167,8 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
>         }
>
>         /* _pcw = freq * postdiv / fin * 2^pcwfbits */
> -       _pcw = ((u64)freq << val) << (pll->data->pcwbits - INTEGER_BITS);
> +       ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> +       _pcw = ((u64)freq << val) << (pll->data->pcwbits - ibits);
>         do_div(_pcw, fin);
>
>         *pcw = (u32)_pcw;
> --
> 2.18.0
>
Weiyi Lu Nov. 20, 2018, 3:51 a.m. UTC | #2
On Tue, 2018-11-13 at 08:18 -0800, Nicolas Boichat wrote:
> On Mon, Nov 5, 2018 at 10:43 PM Weiyi Lu <weiyi.lu@mediatek.com> wrote:
> >
> > From: Owen Chen <owen.chen@mediatek.com>
> >
> > 1. pcwibits: The integer bits of pcw for plls is extend to 8 bits,
> >    add a variable to indicate this change and
> >    backward-compatible.
> > 2. fmin: The pll freqency lower-bound is vary from 1GMhz to
> >    1.5Ghz, add a variable to indicate platform-dependent.
> >
> > Signed-off-by: Owen Chen <owen.chen@mediatek.com>
> > ---
> >  drivers/clk/mediatek/clk-mtk.h |  2 ++
> >  drivers/clk/mediatek/clk-pll.c | 10 +++++++---
> >  2 files changed, 9 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> > index f83c2bbb677e..1882221fe994 100644
> > --- a/drivers/clk/mediatek/clk-mtk.h
> > +++ b/drivers/clk/mediatek/clk-mtk.h
> > @@ -215,7 +215,9 @@ struct mtk_pll_data {
> >         const struct clk_ops *ops;
> >         u32 rst_bar_mask;
> >         unsigned long fmax;
> > +       unsigned long fmin;
> 
> Minor nit: I'd put fmin before fmax in the structure.
> 

OK, thanks for the suggestion. will fix in next version

> >         int pcwbits;
> > +       int pcwibits;
> >         uint32_t pcw_reg;
> >         int pcw_shift;
> >         const struct mtk_pll_div_table *div_table;
> > diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
> > index f54e4015b0b1..0ec2c62d9383 100644
> > --- a/drivers/clk/mediatek/clk-pll.c
> > +++ b/drivers/clk/mediatek/clk-pll.c
> 
> I'd add a note next to:
> #define INTEGER_BITS            7
> to say that this is the default, and can be overridden with pcwibits.
> 

OK, thanks for the suggestion. will add in next version

> > @@ -69,11 +69,13 @@ static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
> >  {
> >         int pcwbits = pll->data->pcwbits;
> >         int pcwfbits;
> > +       int ibits;
> >         u64 vco;
> >         u8 c = 0;
> >
> >         /* The fractional part of the PLL divider. */
> > -       pcwfbits = pcwbits > INTEGER_BITS ? pcwbits - INTEGER_BITS : 0;
> > +       ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> > +       pcwfbits = pcwbits > ibits ? pcwbits - ibits : 0;
> >
> >         vco = (u64)fin * pcw;
> >
> > @@ -138,9 +140,10 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
> >  static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
> >                 u32 freq, u32 fin)
> >  {
> > -       unsigned long fmin = 1000 * MHZ;
> > +       unsigned long fmin = pll->data->fmin ? pll->data->fmin : 1000 * MHZ;
> 
> I'd put parentheses around (1000 * MHZ), to avoid the need to think
> about precedence...
> 

OK, thanks for the suggestion. will add in next version

> >         const struct mtk_pll_div_table *div_table = pll->data->div_table;
> >         u64 _pcw;
> > +       int ibits;
> >         u32 val;
> >
> >         if (freq > pll->data->fmax)
> > @@ -164,7 +167,8 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
> >         }
> >
> >         /* _pcw = freq * postdiv / fin * 2^pcwfbits */
> > -       _pcw = ((u64)freq << val) << (pll->data->pcwbits - INTEGER_BITS);
> > +       ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> > +       _pcw = ((u64)freq << val) << (pll->data->pcwbits - ibits);
> >         do_div(_pcw, fin);
> >
> >         *pcw = (u32)_pcw;
> > --
> > 2.18.0
> >
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
Stephen Boyd Nov. 21, 2018, 8:03 a.m. UTC | #3
Quoting Weiyi Lu (2018-11-19 19:51:20)
> On Tue, 2018-11-13 at 08:18 -0800, Nicolas Boichat wrote:
> > On Mon, Nov 5, 2018 at 10:43 PM Weiyi Lu <weiyi.lu@mediatek.com> wrote:
> > > @@ -138,9 +140,10 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
> > >  static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
> > >                 u32 freq, u32 fin)
> > >  {
> > > -       unsigned long fmin = 1000 * MHZ;
> > > +       unsigned long fmin = pll->data->fmin ? pll->data->fmin : 1000 * MHZ;
> > 
> > I'd put parentheses around (1000 * MHZ), to avoid the need to think
> > about precedence...
> > 
> 
> OK, thanks for the suggestion. will add in next version

Better style would be to not use a ternary statement for anything like
this and have an if condition instead.
diff mbox series

Patch

diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index f83c2bbb677e..1882221fe994 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -215,7 +215,9 @@  struct mtk_pll_data {
 	const struct clk_ops *ops;
 	u32 rst_bar_mask;
 	unsigned long fmax;
+	unsigned long fmin;
 	int pcwbits;
+	int pcwibits;
 	uint32_t pcw_reg;
 	int pcw_shift;
 	const struct mtk_pll_div_table *div_table;
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index f54e4015b0b1..0ec2c62d9383 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -69,11 +69,13 @@  static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
 {
 	int pcwbits = pll->data->pcwbits;
 	int pcwfbits;
+	int ibits;
 	u64 vco;
 	u8 c = 0;
 
 	/* The fractional part of the PLL divider. */
-	pcwfbits = pcwbits > INTEGER_BITS ? pcwbits - INTEGER_BITS : 0;
+	ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
+	pcwfbits = pcwbits > ibits ? pcwbits - ibits : 0;
 
 	vco = (u64)fin * pcw;
 
@@ -138,9 +140,10 @@  static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
 static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
 		u32 freq, u32 fin)
 {
-	unsigned long fmin = 1000 * MHZ;
+	unsigned long fmin = pll->data->fmin ? pll->data->fmin : 1000 * MHZ;
 	const struct mtk_pll_div_table *div_table = pll->data->div_table;
 	u64 _pcw;
+	int ibits;
 	u32 val;
 
 	if (freq > pll->data->fmax)
@@ -164,7 +167,8 @@  static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
 	}
 
 	/* _pcw = freq * postdiv / fin * 2^pcwfbits */
-	_pcw = ((u64)freq << val) << (pll->data->pcwbits - INTEGER_BITS);
+	ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
+	_pcw = ((u64)freq << val) << (pll->data->pcwbits - ibits);
 	do_div(_pcw, fin);
 
 	*pcw = (u32)_pcw;