Message ID | 20181127092824.22756-4-peter.chen@nxp.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | usb: chipidea: imx: add HSIC support | expand |
On 27.11.18 10:30, PETER CHEN wrote: > The chipidea controller has some special requirements during > suspend/resume, override common ehci->hub_control to implement > it. > > Signed-off-by: Peter Chen <peter.chen@nxp.com> Tested on i.MX6S with Microchip LAN9730 USB HSIC Ethernet Controller. I have some minor format fixes below. Apart from that: Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> > --- > drivers/usb/chipidea/host.c | 76 +++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 76 insertions(+) > > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c > index 028a3574266a..aa4756dab487 100644 > --- a/drivers/usb/chipidea/host.c > +++ b/drivers/usb/chipidea/host.c > @@ -220,6 +220,81 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci) > host_stop(ci); > } > > +/* The below code is based on tegra ehci driver */ > +static int ci_ehci_hub_control( > + struct usb_hcd *hcd, > + u16 typeReq, > + u16 wValue, > + u16 wIndex, > + char *buf, > + u16 wLength > +) > +{ > + struct ehci_hcd *ehci = hcd_to_ehci(hcd); > + u32 __iomem *status_reg; > + u32 temp; > + unsigned long flags; > + int retval = 0; > + struct device *dev = hcd->self.controller; > + struct ci_hdrc *ci = dev_get_drvdata(dev); > + > + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; > + > + spin_lock_irqsave(&ehci->lock, flags); > + > + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { > + temp = ehci_readl(ehci, status_reg); > + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { > + retval = -EPIPE; > + goto done; > + } > + > + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); > + temp |= PORT_WKDISC_E | PORT_WKOC_E; > + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); > + > + /* > + * If a transaction is in progress, there may be a delay in > + * suspending the port. Poll until the port is suspended. > + */ > + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, > + PORT_SUSPEND, 5000)) Indentation: ^ ^ > + ehci_err(ehci, "timeout waiting for SUSPEND\n"); > + > + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { > + if (ci->platdata->notify_event) > + ci->platdata->notify_event > + (ci, CI_HDRC_IMX_HSIC_SUSPEND_EVENT); I think the open parentheses and the first parameter should be on the first line: ci->platdata->notify_event(ci, CI_HDRC_IMX_HSIC_SUSPEND_EVENT); > + > + temp = ehci_readl(ehci, status_reg); > + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); > + ehci_writel(ehci, temp, status_reg); > + } > + > + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); > + goto done; > + } > + > + /* > + * After resume has finished, it needs do some post resume > + * operation for some SoCs. > + */ > + else if (typeReq == ClearPortFeature && > + wValue == USB_PORT_FEAT_C_SUSPEND) { Indentation: ^ ^ > + > + /* Make sure the resume has finished, it should be finished */ > + if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000)) > + ehci_err(ehci, "timeout waiting for resume\n"); > + } > + > + spin_unlock_irqrestore(&ehci->lock, flags); > + > + /* Handle the hub control events here */ > + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); > +done: > + spin_unlock_irqrestore(&ehci->lock, flags); > + return retval; > +} > static int ci_ehci_bus_suspend(struct usb_hcd *hcd) > { > struct ehci_hcd *ehci = hcd_to_ehci(hcd); > @@ -298,4 +373,5 @@ void ci_hdrc_host_driver_init(void) > ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); > orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; > ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; > + ci_ehci_hc_driver.hub_control = ci_ehci_hub_control; > } >
> On 27.11.18 10:30, PETER CHEN wrote: > > The chipidea controller has some special requirements during > > suspend/resume, override common ehci->hub_control to implement it. > > > > Signed-off-by: Peter Chen <peter.chen@nxp.com> > > Tested on i.MX6S with Microchip LAN9730 USB HSIC Ethernet Controller. > I have some minor format fixes below. Apart from that: > > Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> > Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> > > > --- > > drivers/usb/chipidea/host.c | 76 > +++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 76 insertions(+) > > > > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c > > index 028a3574266a..aa4756dab487 100644 > > --- a/drivers/usb/chipidea/host.c > > +++ b/drivers/usb/chipidea/host.c > > @@ -220,6 +220,81 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci) > > host_stop(ci); > > } > > > > +/* The below code is based on tegra ehci driver */ static int > > +ci_ehci_hub_control( > > + struct usb_hcd *hcd, > > + u16 typeReq, > > + u16 wValue, > > + u16 wIndex, > > + char *buf, > > + u16 wLength > > +) > > +{ > > + struct ehci_hcd *ehci = hcd_to_ehci(hcd); > > + u32 __iomem *status_reg; > > + u32 temp; > > + unsigned long flags; > > + int retval = 0; > > + struct device *dev = hcd->self.controller; > > + struct ci_hdrc *ci = dev_get_drvdata(dev); > > + > > + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; > > + > > + spin_lock_irqsave(&ehci->lock, flags); > > + > > + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) > { > > + temp = ehci_readl(ehci, status_reg); > > + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { > > + retval = -EPIPE; > > + goto done; > > + } > > + > > + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); > > + temp |= PORT_WKDISC_E | PORT_WKOC_E; > > + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); > > + > > + /* > > + * If a transaction is in progress, there may be a delay in > > + * suspending the port. Poll until the port is suspended. > > + */ > > + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, > > + PORT_SUSPEND, 5000)) > > Indentation: ^ ^ > > > + ehci_err(ehci, "timeout waiting for SUSPEND\n"); > > + > > + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { > > + if (ci->platdata->notify_event) > > + ci->platdata->notify_event > > + (ci, CI_HDRC_IMX_HSIC_SUSPEND_EVENT); > > I think the open parentheses and the first parameter should be on the first line: > > ci->platdata->notify_event(ci, > CI_HDRC_IMX_HSIC_SUSPEND_EVENT); > > > + > > + temp = ehci_readl(ehci, status_reg); > > + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); > > + ehci_writel(ehci, temp, status_reg); > > + } > > + > > + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); > > + goto done; > > + } > > + > > + /* > > + * After resume has finished, it needs do some post resume > > + * operation for some SoCs. > > + */ > > + else if (typeReq == ClearPortFeature && > > + wValue == USB_PORT_FEAT_C_SUSPEND) > { > > Indentation: ^ ^ > Thanks, I will change these code style comments for next revision. Peter
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 028a3574266a..aa4756dab487 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -220,6 +220,81 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci) host_stop(ci); } +/* The below code is based on tegra ehci driver */ +static int ci_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *status_reg; + u32 temp; + unsigned long flags; + int retval = 0; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; + + spin_lock_irqsave(&ehci->lock, flags); + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + /* + * If a transaction is in progress, there may be a delay in + * suspending the port. Poll until the port is suspended. + */ + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, + PORT_SUSPEND, 5000)) + ehci_err(ehci, "timeout waiting for SUSPEND\n"); + + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + if (ci->platdata->notify_event) + ci->platdata->notify_event + (ci, CI_HDRC_IMX_HSIC_SUSPEND_EVENT); + + temp = ehci_readl(ehci, status_reg); + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, temp, status_reg); + } + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + /* + * After resume has finished, it needs do some post resume + * operation for some SoCs. + */ + else if (typeReq == ClearPortFeature && + wValue == USB_PORT_FEAT_C_SUSPEND) { + + /* Make sure the resume has finished, it should be finished */ + if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000)) + ehci_err(ehci, "timeout waiting for resume\n"); + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} static int ci_ehci_bus_suspend(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -298,4 +373,5 @@ void ci_hdrc_host_driver_init(void) ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; + ci_ehci_hc_driver.hub_control = ci_ehci_hub_control; }
The chipidea controller has some special requirements during suspend/resume, override common ehci->hub_control to implement it. Signed-off-by: Peter Chen <peter.chen@nxp.com> --- drivers/usb/chipidea/host.c | 76 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+)