diff mbox series

[RFC,07/10] dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec

Message ID d0ce4b1f2a89a319d6becb5f88d7ca4184aa5595.1543782328.git.mesihkilinc@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add support for DMA and audio codec of F1C100s | expand

Commit Message

Mesih Kilinc Dec. 2, 2018, 9:23 p.m. UTC 
Add compatible string for Allwinner suniv F1C100s audio codec.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 Documentation/devicetree/bindings/sound/sun4i-codec.txt | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Rob Herring (Arm) Dec. 19, 2018, 2:04 p.m. UTC | #1 
On Mon, Dec 03, 2018 at 12:23:14AM +0300, Mesih Kilinc wrote:
> Add compatible string for Allwinner suniv F1C100s audio codec.

Typo in the subject. Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>

> 
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
>  Documentation/devicetree/bindings/sound/sun4i-codec.txt | 5 +++++
>  1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index 66579bb..9778bc1 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -8,6 +8,7 @@  Required properties:
 		- "allwinner,sun8i-a23-codec"
 		- "allwinner,sun8i-h3-codec"
 		- "allwinner,sun8i-v3s-codec"
+		- "allwinner,suniv-f1c100s-codec"
 - reg: must contain the registers location and length
 - interrupts: must contain the codec interrupt
 - dmas: DMA channels for tx and rx dma. See the DMA client binding,
@@ -27,6 +28,7 @@  Required properties for the following compatibles:
 		- "allwinner,sun8i-a23-codec"
 		- "allwinner,sun8i-h3-codec"
 		- "allwinner,sun8i-v3s-codec"
+		- "allwinner,suniv-f1c100s-codec"
 - resets: phandle to the reset control for this device
 - allwinner,audio-routing: A list of the connections between audio components.
 			   Each entry is a pair of strings, the first being the
@@ -41,6 +43,7 @@  Required properties for the following compatibles:
 			   "MIC1"
 			   "MIC2"	(not on sun8i-v3s)
 			   "MIC3"	(sun6i-a31 only)
+			   "MIC"	(suniv-f1c100s only)
 
 			   Microphone biases from the SoC:
 			   "HBIAS"
@@ -51,6 +54,8 @@  Required properties for the following compatibles:
 			   "Headset Mic"
 			   "Line In"
 			   "Line Out"
+			   "Right FM In"	(suniv-f1c100s only)
+			   "Left FM In"		(suniv-f1c100s only)
 			   "Mic"
 			   "Speaker"