| Message ID | 20181227112750.446-1-haibo.chen@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: sdhci-esdhc-imx: fix HS400 timing issue | expand |
On 27/12/18 1:20 PM, BOUGH CHEN wrote: > Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/ > MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS, > we can not do tuning reset, otherwise HS400 timing is not right. > > Here is the process of init HS400, first finish tuning in HS200 mode, > then switch to HS mode and 8 bit DDR mode, finally switch to HS400 > mode. If we do tuning reset in HS mode, this will cause HS400 mode > lost the tuning setting, which will cause CRC error. > > This fix commit d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning > circuit when power on mmc card"). > > Signed-off-by: Haibo Chen <haibo.chen@nxp.com> > Cc: stable@vger.kernel.org # v4.12+ Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/sdhci-esdhc-imx.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index d0d319398a54..984cc1a788cb 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -979,6 +979,7 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing) > case MMC_TIMING_UHS_SDR25: > case MMC_TIMING_UHS_SDR50: > case MMC_TIMING_UHS_SDR104: > + case MMC_TIMING_MMC_HS: > case MMC_TIMING_MMC_HS200: > writel(m, host->ioaddr + ESDHC_MIX_CTRL); > break; >
On Thu, 27 Dec 2018 at 12:20, BOUGH CHEN <haibo.chen@nxp.com> wrote: > > Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/ > MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS, > we can not do tuning reset, otherwise HS400 timing is not right. > > Here is the process of init HS400, first finish tuning in HS200 mode, > then switch to HS mode and 8 bit DDR mode, finally switch to HS400 > mode. If we do tuning reset in HS mode, this will cause HS400 mode > lost the tuning setting, which will cause CRC error. > > This fix commit d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning > circuit when power on mmc card"). > > Signed-off-by: Haibo Chen <haibo.chen@nxp.com> > Cc: stable@vger.kernel.org # v4.12+ Applied for next, thanks! Kind regards Uffe > --- > drivers/mmc/host/sdhci-esdhc-imx.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index d0d319398a54..984cc1a788cb 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -979,6 +979,7 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing) > case MMC_TIMING_UHS_SDR25: > case MMC_TIMING_UHS_SDR50: > case MMC_TIMING_UHS_SDR104: > + case MMC_TIMING_MMC_HS: > case MMC_TIMING_MMC_HS200: > writel(m, host->ioaddr + ESDHC_MIX_CTRL); > break; > -- > 2.17.1 >
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d0d319398a54..984cc1a788cb 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -979,6 +979,7 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing) case MMC_TIMING_UHS_SDR25: case MMC_TIMING_UHS_SDR50: case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS: case MMC_TIMING_MMC_HS200: writel(m, host->ioaddr + ESDHC_MIX_CTRL); break;
Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/ MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS, we can not do tuning reset, otherwise HS400 timing is not right. Here is the process of init HS400, first finish tuning in HS200 mode, then switch to HS mode and 8 bit DDR mode, finally switch to HS400 mode. If we do tuning reset in HS mode, this will cause HS400 mode lost the tuning setting, which will cause CRC error. This fix commit d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card"). Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.12+ --- drivers/mmc/host/sdhci-esdhc-imx.c | 1 + 1 file changed, 1 insertion(+)