@@ -56,8 +56,6 @@ Required properties (DMA function blocks):
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
the supported chips are mt2701 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -78,7 +76,6 @@ ovl0: ovl@1400c000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
};
ovl1: ovl@1400d000 {
@@ -88,7 +85,6 @@ ovl1: ovl@1400d000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
- mediatek,larb = <&larb4>;
};
rdma0: rdma@1400e000 {
@@ -98,7 +94,6 @@ rdma0: rdma@1400e000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
};
rdma1: rdma@1400f000 {
@@ -108,7 +103,6 @@ rdma1: rdma@1400f000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb4>;
};
rdma2: rdma@14010000 {
@@ -118,7 +112,6 @@ rdma2: rdma@14010000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
- mediatek,larb = <&larb4>;
};
wdma0: wdma@14011000 {
@@ -128,7 +121,6 @@ wdma0: wdma@14011000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
- mediatek,larb = <&larb0>;
};
wdma1: wdma@14012000 {
@@ -138,7 +130,6 @@ wdma1: wdma@14012000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
- mediatek,larb = <&larb4>;
};
color0: color@14013000 {
@@ -15,9 +15,6 @@ Required properties:
- clock-names: must contain "jpgdec-smi" and "jpgdec".
- power-domains: a phandle to the power domain, see
Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -32,7 +29,6 @@ Example:
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
Example:
mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
};
@@ -51,7 +47,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
};
mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
};
mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
};
mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
};
@@ -9,7 +9,6 @@ Required properties:
- reg : Physical base address of the video codec registers and length of
memory mapped region.
- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property.
- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
@@ -39,7 +38,6 @@ vcodec_dec: vcodec@16000000 {
<0 0x16027800 0 0x800>, /*VP8_VL*/
<0 0x16028400 0 0x400>; /*VP9_VD*/
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -74,8 +72,6 @@ vcodec_dec: vcodec@16000000 {
<0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb3>,
- <&larb5>;
iommus = <&iommu M4U_PORT_VENC_RCPU>,
<&iommu M4U_PORT_VENC_REC>,
<&iommu M4U_PORT_VENC_BSDMA>,
After adding device_link between the consumer with the smi-larbs, if the consumer call its owner pm_runtime_get(_sync), the pm_runtime_get(_sync) of smi-larb and smi-common will be called automatically. Thus, the consumer don't need the property. And IOMMU also know which larb this consumer connects with from iommu id in the "iommus=" property. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- I guess it should go through Matthias's tree if the patch is ok, thus I don't separate to different patches. If it's really needed, please feel free to tell me. --- .../devicetree/bindings/display/mediatek/mediatek,disp.txt | 9 --------- .../devicetree/bindings/media/mediatek-jpeg-decoder.txt | 4 ---- Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 -------- Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 4 ---- 4 files changed, 25 deletions(-)