diff mbox series

[v4,4/4] PCI: imx6: Add support for i.MX8MQ

Message ID 20190104165335.13205-5-andrew.smirnov@gmail.com (mailing list archive)
State New, archived
Headers show
Series PCIE support for i.MX8MQ | expand

Commit Message

Andrey Smirnov Jan. 4, 2019, 4:53 p.m. UTC
Add code needed to support i.MX8MQ variant.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Cc: devicetree@vger.kernel.org,
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 .../bindings/pci/fsl,imx6q-pcie.txt           |  3 +-
 drivers/pci/controller/dwc/Kconfig            |  4 +-
 drivers/pci/controller/dwc/pci-imx6.c         | 77 ++++++++++++++++++-
 3 files changed, 79 insertions(+), 5 deletions(-)

Comments

Lucas Stach Jan. 8, 2019, 8:23 a.m. UTC | #1
Am Freitag, den 04.01.2019, 08:53 -0800 schrieb Andrey Smirnov:
> Add code needed to support i.MX8MQ variant.
> 
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Fabio Estevam <fabio.estevam@nxp.com>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Leonard Crestez <leonard.crestez@nxp.com>
> > Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> > Cc: Richard Zhu <hongxing.zhu@nxp.com>
> > Cc: Rob Herring <robh@kernel.org>,
> > Cc: devicetree@vger.kernel.org,
> Cc: linux-imx@nxp.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-pci@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  .../bindings/pci/fsl,imx6q-pcie.txt           |  3 +-
>  drivers/pci/controller/dwc/Kconfig            |  4 +-
>  drivers/pci/controller/dwc/pci-imx6.c         | 77 ++++++++++++++++++-
>  3 files changed, 79 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index d514c1f2365f..920ca93870a8 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -9,6 +9,7 @@ Required properties:
> >  	- "fsl,imx6sx-pcie",
> >  	- "fsl,imx6qp-pcie"
> >  	- "fsl,imx7d-pcie"
> > +	- "fsl,imx8mq-pcie"
>  - reg: base address and length of the PCIe controller
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
>    PCIE_PHY power domains
>  - power-domain-names: Must be "pcie", "pcie_phy"
>  
> -Additional required properties for imx7d-pcie:
> +Additional required properties for imx7d-pcie and imx8mq-pcie:
>  - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
>  - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
>    IP block
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 6aafec3fad00..83ea318ad989 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -89,8 +89,8 @@ config PCI_EXYNOS
> >  	select PCIE_DW_HOST
>  
>  config PCI_IMX6
> > -	bool "Freescale i.MX6/7 PCIe controller"
> > -	depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
> > +	bool "Freescale i.MX6/7/8 PCIe controller"
> > +	depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST)
> >  	depends on PCI_MSI_IRQ_DOMAIN
> >  	select PCIE_DW_HOST
>  
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 75ee0cd7af3b..dd9d8732f6ba 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -8,6 +8,7 @@
> >   * Author: Sean Cross <xobs@kosagi.com>
>   */
>  
> +#include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
>  #include <linux/gpio.h>
> @@ -32,6 +33,12 @@
>  
>  #include "pcie-designware.h"
>  
> > +#define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
> > +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN	BIT(10)
> > +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE	BIT(11)
> > +#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE	GENMASK(11, 8)
> > +#define IMX8MQ_PCIE2_BASE_ADDR			0x33c00000
> +
> >  #define to_imx6_pcie(x)	dev_get_drvdata((x)->dev)
>  
>  enum imx6_pcie_variants {
> @@ -39,6 +46,7 @@ enum imx6_pcie_variants {
> >  	IMX6SX,
> >  	IMX6QP,
> >  	IMX7D,
> > +	IMX8MQ,
>  };
>  
> >  #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
> @@ -58,6 +66,7 @@ struct imx6_pcie {
> > >  	struct clk		*pcie_inbound_axi;
> > >  	struct clk		*pcie;
> > >  	struct regmap		*iomuxc_gpr;
> > > +	u32			controller_id;
> > >  	struct reset_control	*pciephy_reset;
> > >  	struct reset_control	*apps_reset;
> > >  	struct reset_control	*turnoff_reset;
> @@ -276,6 +285,7 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
> >  	pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
>  }
>  
> +#ifdef CONFIG_ARM
>  /*  Added for PCI abort handling */
>  static int imx6q_pcie_abort_handler(unsigned long addr,
> >  		unsigned int fsr, struct pt_regs *regs)
> @@ -309,6 +319,7 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
>  
> >  	return 1;
>  }
> +#endif
>  
>  static int imx6_pcie_attach_pd(struct device *dev)
>  {
> @@ -353,6 +364,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
>  
> >  	switch (imx6_pcie->drvdata->variant) {
> >  	case IMX7D:
> > +	case IMX8MQ:
> >  		reset_control_assert(imx6_pcie->pciephy_reset);
> >  		reset_control_assert(imx6_pcie->apps_reset);
> >  		break;
> @@ -387,10 +399,17 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> >  	}
>  }
>  
> +static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
> +{
> > +	WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ);
> > +	return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
> +}
> +
>  static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
>  {
> >  	struct dw_pcie *pci = imx6_pcie->pci;
> >  	struct device *dev = pci->dev;
> > +	unsigned int offset;
> >  	int ret = 0;
>  
> >  	switch (imx6_pcie->drvdata->variant) {
> @@ -421,6 +440,19 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> >  		break;
> >  	case IMX7D:
> >  		break;
> > +	case IMX8MQ:
> > +		offset = imx6_pcie_grp_offset(imx6_pcie);
> > +		/*
> > +		 * Set the over ride low and enabled
> > +		 * make sure that REF_CLK is turned on.
> > +		 */
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
> > +				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
> > +				   0);
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
> > +				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
> > +				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
> > +		break;
> >  	}
>  
> >  	return ret;
> @@ -497,6 +529,9 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> >  	}
>  
> >  	switch (imx6_pcie->drvdata->variant) {
> > +	case IMX8MQ:
> > +		reset_control_deassert(imx6_pcie->pciephy_reset);
> > +		break;
> >  	case IMX7D:
> >  		reset_control_deassert(imx6_pcie->pciephy_reset);
> >  		imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
> @@ -532,9 +567,37 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> >  	}
>  }
>  
> +static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> +{
> > +	unsigned int mask, val;
> +
> > +	if (imx6_pcie->drvdata->variant == IMX8MQ &&
> > +	    imx6_pcie->controller_id == 1) {
> > +		mask   = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
> > +		val    = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> > +				    PCI_EXP_TYPE_ROOT_PORT);
> > +	} else {
> > +		mask = IMX6Q_GPR12_DEVICE_TYPE;
> > +		val  = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
> > +				  PCI_EXP_TYPE_ROOT_PORT);
> > +	}
> +
> > +	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
> +}
> +
>  static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
>  {
> >  	switch (imx6_pcie->drvdata->variant) {
> > +	case IMX8MQ:
> > +		/*
> > +		 * TODO: Currently this code assumes external
> > +		 * oscillator is being used
> > +		 */
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr,
> > +				   imx6_pcie_grp_offset(imx6_pcie),
> > +				   IMX8MQ_GPR_PCIE_REF_USE_PAD,
> > +				   IMX8MQ_GPR_PCIE_REF_USE_PAD);
> > +		break;
> >  	case IMX7D:
> >  		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> >  				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
> @@ -570,8 +633,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> >  		break;
> >  	}
>  
> > -	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > -			IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
> > +	imx6_pcie_configure_type(imx6_pcie);
>  }
>  
>  static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
> @@ -668,6 +730,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
> >  				   IMX6Q_GPR12_PCIE_CTL_2);
> >  		break;
> >  	case IMX7D:
> > +	case IMX8MQ:
> >  		reset_control_deassert(imx6_pcie->apps_reset);
> >  		break;
> >  	}
> @@ -1008,6 +1071,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> >  		}
> >  		break;
> >  	case IMX7D:
> > +	case IMX8MQ:
> > +		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> > +			imx6_pcie->controller_id = 1;
> +
> >  		imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
> >  									    "pciephy");
> >  		if (IS_ERR(imx6_pcie->pciephy_reset)) {
> @@ -1115,6 +1182,9 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> >  	[IMX7D] = {
> >  		.variant = IMX7D,
> >  	},
> > +	[IMX8MQ] = {
> > +		.variant = IMX8MQ,
> > +	},
>  };
>  
>  static const struct of_device_id imx6_pcie_of_match[] = {
> @@ -1122,6 +1192,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> >  	{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
> >  	{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
> >  	{ .compatible = "fsl,imx7d-pcie",  .data = &drvdata[IMX7D],  },
> > +	{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } ,
> >  	{},
>  };
>  
> @@ -1138,6 +1209,7 @@ static struct platform_driver imx6_pcie_driver = {
>  
>  static int __init imx6_pcie_init(void)
>  {
> +#ifdef CONFIG_ARM
> >  	/*
> >  	 * Since probe() can be deferred we need to make sure that
> >  	 * hook_fault_code is not called after __init memory is freed
> @@ -1147,6 +1219,7 @@ static int __init imx6_pcie_init(void)
> >  	 */
> >  	hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
> >  			"external abort on non-linefetch");
> +#endif
>  
> >  	return platform_driver_register(&imx6_pcie_driver);
>  }
Rob Herring (Arm) Jan. 11, 2019, 7:53 p.m. UTC | #2
On Fri, Jan 04, 2019 at 08:53:35AM -0800, Andrey Smirnov wrote:
> Add code needed to support i.MX8MQ variant.
> 
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Leonard Crestez <leonard.crestez@nxp.com>
> Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Rob Herring <robh@kernel.org>,
> Cc: devicetree@vger.kernel.org,
> Cc: linux-imx@nxp.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-pci@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
>  .../bindings/pci/fsl,imx6q-pcie.txt           |  3 +-
>  drivers/pci/controller/dwc/Kconfig            |  4 +-
>  drivers/pci/controller/dwc/pci-imx6.c         | 77 ++++++++++++++++++-
>  3 files changed, 79 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index d514c1f2365f..920ca93870a8 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -9,6 +9,7 @@ Required properties:
>  	- "fsl,imx6sx-pcie",
>  	- "fsl,imx6qp-pcie"
>  	- "fsl,imx7d-pcie"
> +	- "fsl,imx8mq-pcie"
>  - reg: base address and length of the PCIe controller
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
>    PCIE_PHY power domains
>  - power-domain-names: Must be "pcie", "pcie_phy"
>  
> -Additional required properties for imx7d-pcie:
> +Additional required properties for imx7d-pcie and imx8mq-pcie:
>  - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
>  - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
>    IP block
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 6aafec3fad00..83ea318ad989 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -89,8 +89,8 @@ config PCI_EXYNOS
>  	select PCIE_DW_HOST
>  
>  config PCI_IMX6
> -	bool "Freescale i.MX6/7 PCIe controller"
> -	depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
> +	bool "Freescale i.MX6/7/8 PCIe controller"
> +	depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST)

Since you added the ifdef around the abort handler, I think you can drop 
"(ARM || ARM64)" and enable building other arches.

Rob
Andrey Smirnov Jan. 12, 2019, 9:28 p.m. UTC | #3
On Fri, Jan 11, 2019 at 11:53 AM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, Jan 04, 2019 at 08:53:35AM -0800, Andrey Smirnov wrote:
> > Add code needed to support i.MX8MQ variant.
> >
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Fabio Estevam <fabio.estevam@nxp.com>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Leonard Crestez <leonard.crestez@nxp.com>
> > Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> > Cc: Richard Zhu <hongxing.zhu@nxp.com>
> > Cc: Rob Herring <robh@kernel.org>,
> > Cc: devicetree@vger.kernel.org,
> > Cc: linux-imx@nxp.com
> > Cc: linux-arm-kernel@lists.infradead.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: linux-pci@vger.kernel.org
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > ---
> >  .../bindings/pci/fsl,imx6q-pcie.txt           |  3 +-
> >  drivers/pci/controller/dwc/Kconfig            |  4 +-
> >  drivers/pci/controller/dwc/pci-imx6.c         | 77 ++++++++++++++++++-
> >  3 files changed, 79 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> > index d514c1f2365f..920ca93870a8 100644
> > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> > @@ -9,6 +9,7 @@ Required properties:
> >       - "fsl,imx6sx-pcie",
> >       - "fsl,imx6qp-pcie"
> >       - "fsl,imx7d-pcie"
> > +     - "fsl,imx8mq-pcie"
> >  - reg: base address and length of the PCIe controller
> >  - interrupts: A list of interrupt outputs of the controller. Must contain an
> >    entry for each entry in the interrupt-names property.
> > @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
> >    PCIE_PHY power domains
> >  - power-domain-names: Must be "pcie", "pcie_phy"
> >
> > -Additional required properties for imx7d-pcie:
> > +Additional required properties for imx7d-pcie and imx8mq-pcie:
> >  - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
> >  - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
> >    IP block
> > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > index 6aafec3fad00..83ea318ad989 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -89,8 +89,8 @@ config PCI_EXYNOS
> >       select PCIE_DW_HOST
> >
> >  config PCI_IMX6
> > -     bool "Freescale i.MX6/7 PCIe controller"
> > -     depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
> > +     bool "Freescale i.MX6/7/8 PCIe controller"
> > +     depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST)
>
> Since you added the ifdef around the abort handler, I think you can drop
> "(ARM || ARM64)" and enable building other arches.
>

OK, makes sense. I'll give it a go in v5.

Thanks,
Andrey Smirnov
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index d514c1f2365f..920ca93870a8 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -9,6 +9,7 @@  Required properties:
 	- "fsl,imx6sx-pcie",
 	- "fsl,imx6qp-pcie"
 	- "fsl,imx7d-pcie"
+	- "fsl,imx8mq-pcie"
 - reg: base address and length of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
@@ -45,7 +46,7 @@  Additional required properties for imx6sx-pcie:
   PCIE_PHY power domains
 - power-domain-names: Must be "pcie", "pcie_phy"
 
-Additional required properties for imx7d-pcie:
+Additional required properties for imx7d-pcie and imx8mq-pcie:
 - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
 - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
   IP block
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 6aafec3fad00..83ea318ad989 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -89,8 +89,8 @@  config PCI_EXYNOS
 	select PCIE_DW_HOST
 
 config PCI_IMX6
-	bool "Freescale i.MX6/7 PCIe controller"
-	depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
+	bool "Freescale i.MX6/7/8 PCIe controller"
+	depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST)
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
 
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 75ee0cd7af3b..dd9d8732f6ba 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -8,6 +8,7 @@ 
  * Author: Sean Cross <xobs@kosagi.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
@@ -32,6 +33,12 @@ 
 
 #include "pcie-designware.h"
 
+#define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
+#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN	BIT(10)
+#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE	BIT(11)
+#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE	GENMASK(11, 8)
+#define IMX8MQ_PCIE2_BASE_ADDR			0x33c00000
+
 #define to_imx6_pcie(x)	dev_get_drvdata((x)->dev)
 
 enum imx6_pcie_variants {
@@ -39,6 +46,7 @@  enum imx6_pcie_variants {
 	IMX6SX,
 	IMX6QP,
 	IMX7D,
+	IMX8MQ,
 };
 
 #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
@@ -58,6 +66,7 @@  struct imx6_pcie {
 	struct clk		*pcie_inbound_axi;
 	struct clk		*pcie;
 	struct regmap		*iomuxc_gpr;
+	u32			controller_id;
 	struct reset_control	*pciephy_reset;
 	struct reset_control	*apps_reset;
 	struct reset_control	*turnoff_reset;
@@ -276,6 +285,7 @@  static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
 	pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
 }
 
+#ifdef CONFIG_ARM
 /*  Added for PCI abort handling */
 static int imx6q_pcie_abort_handler(unsigned long addr,
 		unsigned int fsr, struct pt_regs *regs)
@@ -309,6 +319,7 @@  static int imx6q_pcie_abort_handler(unsigned long addr,
 
 	return 1;
 }
+#endif
 
 static int imx6_pcie_attach_pd(struct device *dev)
 {
@@ -353,6 +364,7 @@  static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
+	case IMX8MQ:
 		reset_control_assert(imx6_pcie->pciephy_reset);
 		reset_control_assert(imx6_pcie->apps_reset);
 		break;
@@ -387,10 +399,17 @@  static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 	}
 }
 
+static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
+{
+	WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ);
+	return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
+}
+
 static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
+	unsigned int offset;
 	int ret = 0;
 
 	switch (imx6_pcie->drvdata->variant) {
@@ -421,6 +440,19 @@  static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
 		break;
 	case IMX7D:
 		break;
+	case IMX8MQ:
+		offset = imx6_pcie_grp_offset(imx6_pcie);
+		/*
+		 * Set the over ride low and enabled
+		 * make sure that REF_CLK is turned on.
+		 */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
+				   0);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
+				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
+		break;
 	}
 
 	return ret;
@@ -497,6 +529,9 @@  static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	}
 
 	switch (imx6_pcie->drvdata->variant) {
+	case IMX8MQ:
+		reset_control_deassert(imx6_pcie->pciephy_reset);
+		break;
 	case IMX7D:
 		reset_control_deassert(imx6_pcie->pciephy_reset);
 		imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
@@ -532,9 +567,37 @@  static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	}
 }
 
+static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
+{
+	unsigned int mask, val;
+
+	if (imx6_pcie->drvdata->variant == IMX8MQ &&
+	    imx6_pcie->controller_id == 1) {
+		mask   = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
+		val    = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+				    PCI_EXP_TYPE_ROOT_PORT);
+	} else {
+		mask = IMX6Q_GPR12_DEVICE_TYPE;
+		val  = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
+				  PCI_EXP_TYPE_ROOT_PORT);
+	}
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
+}
+
 static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
 {
 	switch (imx6_pcie->drvdata->variant) {
+	case IMX8MQ:
+		/*
+		 * TODO: Currently this code assumes external
+		 * oscillator is being used
+		 */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr,
+				   imx6_pcie_grp_offset(imx6_pcie),
+				   IMX8MQ_GPR_PCIE_REF_USE_PAD,
+				   IMX8MQ_GPR_PCIE_REF_USE_PAD);
+		break;
 	case IMX7D:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
@@ -570,8 +633,7 @@  static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
 		break;
 	}
 
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-			IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
+	imx6_pcie_configure_type(imx6_pcie);
 }
 
 static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
@@ -668,6 +730,7 @@  static void imx6_pcie_ltssm_enable(struct device *dev)
 				   IMX6Q_GPR12_PCIE_CTL_2);
 		break;
 	case IMX7D:
+	case IMX8MQ:
 		reset_control_deassert(imx6_pcie->apps_reset);
 		break;
 	}
@@ -1008,6 +1071,10 @@  static int imx6_pcie_probe(struct platform_device *pdev)
 		}
 		break;
 	case IMX7D:
+	case IMX8MQ:
+		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
+			imx6_pcie->controller_id = 1;
+
 		imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
 									    "pciephy");
 		if (IS_ERR(imx6_pcie->pciephy_reset)) {
@@ -1115,6 +1182,9 @@  static const struct imx6_pcie_drvdata drvdata[] = {
 	[IMX7D] = {
 		.variant = IMX7D,
 	},
+	[IMX8MQ] = {
+		.variant = IMX8MQ,
+	},
 };
 
 static const struct of_device_id imx6_pcie_of_match[] = {
@@ -1122,6 +1192,7 @@  static const struct of_device_id imx6_pcie_of_match[] = {
 	{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
 	{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
 	{ .compatible = "fsl,imx7d-pcie",  .data = &drvdata[IMX7D],  },
+	{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } ,
 	{},
 };
 
@@ -1138,6 +1209,7 @@  static struct platform_driver imx6_pcie_driver = {
 
 static int __init imx6_pcie_init(void)
 {
+#ifdef CONFIG_ARM
 	/*
 	 * Since probe() can be deferred we need to make sure that
 	 * hook_fault_code is not called after __init memory is freed
@@ -1147,6 +1219,7 @@  static int __init imx6_pcie_init(void)
 	 */
 	hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
 			"external abort on non-linefetch");
+#endif
 
 	return platform_driver_register(&imx6_pcie_driver);
 }