diff mbox series

[2/2] ARM: dts: Add stmpe-adc DT node to Toradex T30 modules

Message ID 20190122132135.5012-3-dev@pschenker.ch (mailing list archive)
State New, archived
Headers show
Series Adding DTS to support STMPE811 ADC on Toradex Boards | expand

Commit Message

Philippe Schenker Jan. 22, 2019, 1:21 p.m. UTC
From: Philippe Schenker <philippe.schenker@toradex.com>

Add the stmpe-adc DT node as found on Toradex T30 modules

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

---

 arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-apalis.dtsi      | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-colibri.dtsi     | 22 ++++++++++++++--------
 3 files changed, 42 insertions(+), 24 deletions(-)

Comments

Stefan Agner Jan. 22, 2019, 2:53 p.m. UTC | #1
On 22.01.2019 14:21, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
> 
> Add the stmpe-adc DT node as found on Toradex T30 modules
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

Reviewed-by: Stefan Agner <stefan@agner.ch>

> 
> ---
> 
>  arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++--------
>  arch/arm/boot/dts/tegra30-apalis.dtsi      | 22 ++++++++++++++--------
>  arch/arm/boot/dts/tegra30-colibri.dtsi     | 22 ++++++++++++++--------
>  3 files changed, 42 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> index 02f8126481a2..8b7a827d604d 100644
> --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> @@ -994,11 +994,17 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -1008,17 +1014,17 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				/* forbid to use ADC channels 3-0 (touch) */
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi
> b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 7f112f192fe9..c18f6f61d764 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -976,11 +976,17 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -990,17 +996,17 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				/* forbid to use ADC channels 3-0 (touch) */
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi
> b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 35af03ca9e90..3c421a5cfbc2 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -845,11 +845,17 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -859,17 +865,17 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				/* forbid to use ADC channels 3-0 (touch) */
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 02f8126481a2..8b7a827d604d 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -994,11 +994,17 @@ 
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -1008,17 +1014,17 @@ 
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 7f112f192fe9..c18f6f61d764 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,11 +976,17 @@ 
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -990,17 +996,17 @@ 
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..3c421a5cfbc2 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -845,11 +845,17 @@ 
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -859,17 +865,17 @@ 
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*