Message ID | 20190313094903.10006-1-berrange@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [RFC] seccomp: don't kill process for resource control syscalls | expand |
Hi On Wed, Mar 13, 2019 at 10:49 AM Daniel P. Berrangé <berrange@redhat.com> wrote: > > The Mesa library tries to set process affinity on some of its threads in > order to optimize its performance. Currently this results in QEMU being > immediately terminated when seccomp is enabled. > > Mesa doesn't consider failure of the process affinity settings to be > fatal to its operation, but our seccomp policy gives it no choice in > gracefully handling this denial. > > It is reasonable to consider that malicious code using the resource > control syscalls to be a less serious attack than if they were trying > to spawn processes or change UIDs and other such things. Generally > speaking changing the resource control setting will "merely" affect > quality of service of processes on the host. With this in mind, rather > than kill the process, we can relax the policy for these syscalls to > return the EPERM errno value. This allows callers to detect that QEMU > does not want them to change resource allocations, and apply some > reasonable fallback logic. > > The main downside to this is for code which uses these syscalls but does > not check the return value, blindly assuming they will always > succeeed. Returning an errno could result in sub-optimal behaviour. > Arguably though such code is already broken & needs fixing regardless. Given that the situation is stuck with mesa, I also think we need to "downgrade" the seccomp policy. I was preparing a similar patch. Backporting it to f29 would be nice... Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> thanks > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > --- > qemu-seccomp.c | 32 +++++++++++++++++++++++++------- > 1 file changed, 25 insertions(+), 7 deletions(-) > > diff --git a/qemu-seccomp.c b/qemu-seccomp.c > index 36d5829831..9776c9ef40 100644 > --- a/qemu-seccomp.c > +++ b/qemu-seccomp.c > @@ -121,20 +121,37 @@ qemu_seccomp(unsigned int operation, unsigned int flags, void *args) > #endif > } > > -static uint32_t qemu_seccomp_get_kill_action(void) > +static uint32_t qemu_seccomp_get_kill_action(int set) > { > + switch (set) { > + case QEMU_SECCOMP_SET_DEFAULT: > + case QEMU_SECCOMP_SET_OBSOLETE: > + case QEMU_SECCOMP_SET_PRIVILEGED: > + case QEMU_SECCOMP_SET_SPAWN: { > #if defined(SECCOMP_GET_ACTION_AVAIL) && defined(SCMP_ACT_KILL_PROCESS) && \ > defined(SECCOMP_RET_KILL_PROCESS) > - { > - uint32_t action = SECCOMP_RET_KILL_PROCESS; > + static int kill_process = -1; > + if (kill_process == -1) { > + uint32_t action = SECCOMP_RET_KILL_PROCESS; > > - if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > + if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > + kill_process = 1; > + } > + kill_process = 0; > + } > + if (kill_process == 1) { > return SCMP_ACT_KILL_PROCESS; > } > - } > #endif > + return SCMP_ACT_TRAP; > + } > + > + case QEMU_SECCOMP_SET_RESOURCECTL: > + return SCMP_ACT_ERRNO(EPERM); > > - return SCMP_ACT_TRAP; > + default: > + g_assert_not_reached(); > + } > } > > > @@ -143,7 +160,6 @@ static int seccomp_start(uint32_t seccomp_opts) > int rc = 0; > unsigned int i = 0; > scmp_filter_ctx ctx; > - uint32_t action = qemu_seccomp_get_kill_action(); > > ctx = seccomp_init(SCMP_ACT_ALLOW); > if (ctx == NULL) { > @@ -157,10 +173,12 @@ static int seccomp_start(uint32_t seccomp_opts) > } > > for (i = 0; i < ARRAY_SIZE(blacklist); i++) { > + uint32_t action; > if (!(seccomp_opts & blacklist[i].set)) { > continue; > } > > + action = qemu_seccomp_get_kill_action(blacklist[i].set); > rc = seccomp_rule_add_array(ctx, action, blacklist[i].num, > blacklist[i].narg, blacklist[i].arg_cmp); > if (rc < 0) { > -- > 2.20.1 >
Hi On Wed, Mar 13, 2019 at 10:49 AM Daniel P. Berrangé <berrange@redhat.com> wrote: > > The Mesa library tries to set process affinity on some of its threads in > order to optimize its performance. Currently this results in QEMU being > immediately terminated when seccomp is enabled. > > Mesa doesn't consider failure of the process affinity settings to be > fatal to its operation, but our seccomp policy gives it no choice in > gracefully handling this denial. > > It is reasonable to consider that malicious code using the resource > control syscalls to be a less serious attack than if they were trying > to spawn processes or change UIDs and other such things. Generally > speaking changing the resource control setting will "merely" affect > quality of service of processes on the host. With this in mind, rather > than kill the process, we can relax the policy for these syscalls to > return the EPERM errno value. This allows callers to detect that QEMU > does not want them to change resource allocations, and apply some > reasonable fallback logic. > > The main downside to this is for code which uses these syscalls but does > not check the return value, blindly assuming they will always > succeeed. Returning an errno could result in sub-optimal behaviour. > Arguably though such code is already broken & needs fixing regardless. > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > --- > qemu-seccomp.c | 32 +++++++++++++++++++++++++------- > 1 file changed, 25 insertions(+), 7 deletions(-) > > diff --git a/qemu-seccomp.c b/qemu-seccomp.c > index 36d5829831..9776c9ef40 100644 > --- a/qemu-seccomp.c > +++ b/qemu-seccomp.c > @@ -121,20 +121,37 @@ qemu_seccomp(unsigned int operation, unsigned int flags, void *args) > #endif > } > > -static uint32_t qemu_seccomp_get_kill_action(void) > +static uint32_t qemu_seccomp_get_kill_action(int set) Minor nit, let's rename qemu_seccomp_get_kill_action() -> qemu_seccomp_get_action() > { > + switch (set) { > + case QEMU_SECCOMP_SET_DEFAULT: > + case QEMU_SECCOMP_SET_OBSOLETE: > + case QEMU_SECCOMP_SET_PRIVILEGED: > + case QEMU_SECCOMP_SET_SPAWN: { > #if defined(SECCOMP_GET_ACTION_AVAIL) && defined(SCMP_ACT_KILL_PROCESS) && \ > defined(SECCOMP_RET_KILL_PROCESS) > - { > - uint32_t action = SECCOMP_RET_KILL_PROCESS; > + static int kill_process = -1; > + if (kill_process == -1) { > + uint32_t action = SECCOMP_RET_KILL_PROCESS; > > - if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > + if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > + kill_process = 1; > + } > + kill_process = 0; > + } > + if (kill_process == 1) { > return SCMP_ACT_KILL_PROCESS; > } > - } > #endif > + return SCMP_ACT_TRAP; > + } > + > + case QEMU_SECCOMP_SET_RESOURCECTL: > + return SCMP_ACT_ERRNO(EPERM); > > - return SCMP_ACT_TRAP; > + default: > + g_assert_not_reached(); > + } > } > > > @@ -143,7 +160,6 @@ static int seccomp_start(uint32_t seccomp_opts) > int rc = 0; > unsigned int i = 0; > scmp_filter_ctx ctx; > - uint32_t action = qemu_seccomp_get_kill_action(); > > ctx = seccomp_init(SCMP_ACT_ALLOW); > if (ctx == NULL) { > @@ -157,10 +173,12 @@ static int seccomp_start(uint32_t seccomp_opts) > } > > for (i = 0; i < ARRAY_SIZE(blacklist); i++) { > + uint32_t action; > if (!(seccomp_opts & blacklist[i].set)) { > continue; > } > > + action = qemu_seccomp_get_kill_action(blacklist[i].set); > rc = seccomp_rule_add_array(ctx, action, blacklist[i].num, > blacklist[i].narg, blacklist[i].arg_cmp); > if (rc < 0) { > -- > 2.20.1 >
Hi, Thanks for not just killing processes anymore! See the mesa thread https://www.mail-archive.com/mesa-dev@lists.freedesktop.org/msg214474.html for some background. Thanks a lot and best Mathias On Wednesday, 13 March 2019 10:49:03 CET Daniel P. Berrangé wrote: > The Mesa library tries to set process affinity on some of its threads in > order to optimize its performance. Currently this results in QEMU being > immediately terminated when seccomp is enabled. > > Mesa doesn't consider failure of the process affinity settings to be > fatal to its operation, but our seccomp policy gives it no choice in > gracefully handling this denial. > > It is reasonable to consider that malicious code using the resource > control syscalls to be a less serious attack than if they were trying > to spawn processes or change UIDs and other such things. Generally > speaking changing the resource control setting will "merely" affect > quality of service of processes on the host. With this in mind, rather > than kill the process, we can relax the policy for these syscalls to > return the EPERM errno value. This allows callers to detect that QEMU > does not want them to change resource allocations, and apply some > reasonable fallback logic. > > The main downside to this is for code which uses these syscalls but does > not check the return value, blindly assuming they will always > succeeed. Returning an errno could result in sub-optimal behaviour. > Arguably though such code is already broken & needs fixing regardless. > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > --- > qemu-seccomp.c | 32 +++++++++++++++++++++++++------- > 1 file changed, 25 insertions(+), 7 deletions(-) > > diff --git a/qemu-seccomp.c b/qemu-seccomp.c > index 36d5829831..9776c9ef40 100644 > --- a/qemu-seccomp.c > +++ b/qemu-seccomp.c > @@ -121,20 +121,37 @@ qemu_seccomp(unsigned int operation, unsigned int flags, void *args) > #endif > } > > -static uint32_t qemu_seccomp_get_kill_action(void) > +static uint32_t qemu_seccomp_get_kill_action(int set) > { > + switch (set) { > + case QEMU_SECCOMP_SET_DEFAULT: > + case QEMU_SECCOMP_SET_OBSOLETE: > + case QEMU_SECCOMP_SET_PRIVILEGED: > + case QEMU_SECCOMP_SET_SPAWN: { > #if defined(SECCOMP_GET_ACTION_AVAIL) && defined(SCMP_ACT_KILL_PROCESS) && \ > defined(SECCOMP_RET_KILL_PROCESS) > - { > - uint32_t action = SECCOMP_RET_KILL_PROCESS; > + static int kill_process = -1; > + if (kill_process == -1) { > + uint32_t action = SECCOMP_RET_KILL_PROCESS; > > - if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > + if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > + kill_process = 1; > + } > + kill_process = 0; > + } > + if (kill_process == 1) { > return SCMP_ACT_KILL_PROCESS; > } > - } > #endif > + return SCMP_ACT_TRAP; > + } > + > + case QEMU_SECCOMP_SET_RESOURCECTL: > + return SCMP_ACT_ERRNO(EPERM); > > - return SCMP_ACT_TRAP; > + default: > + g_assert_not_reached(); > + } > } > > > @@ -143,7 +160,6 @@ static int seccomp_start(uint32_t seccomp_opts) > int rc = 0; > unsigned int i = 0; > scmp_filter_ctx ctx; > - uint32_t action = qemu_seccomp_get_kill_action(); > > ctx = seccomp_init(SCMP_ACT_ALLOW); > if (ctx == NULL) { > @@ -157,10 +173,12 @@ static int seccomp_start(uint32_t seccomp_opts) > } > > for (i = 0; i < ARRAY_SIZE(blacklist); i++) { > + uint32_t action; > if (!(seccomp_opts & blacklist[i].set)) { > continue; > } > > + action = qemu_seccomp_get_kill_action(blacklist[i].set); > rc = seccomp_rule_add_array(ctx, action, blacklist[i].num, > blacklist[i].narg, blacklist[i].arg_cmp); > if (rc < 0) { >
On 13/03/2019 - 13:22:13, Marc-André Lureau wrote: > Hi > > On Wed, Mar 13, 2019 at 10:49 AM Daniel P. Berrangé <berrange@redhat.com> wrote: > > > > The Mesa library tries to set process affinity on some of its threads in > > order to optimize its performance. Currently this results in QEMU being > > immediately terminated when seccomp is enabled. > > > > Mesa doesn't consider failure of the process affinity settings to be > > fatal to its operation, but our seccomp policy gives it no choice in > > gracefully handling this denial. > > > > It is reasonable to consider that malicious code using the resource > > control syscalls to be a less serious attack than if they were trying > > to spawn processes or change UIDs and other such things. Generally > > speaking changing the resource control setting will "merely" affect > > quality of service of processes on the host. With this in mind, rather > > than kill the process, we can relax the policy for these syscalls to > > return the EPERM errno value. This allows callers to detect that QEMU > > does not want them to change resource allocations, and apply some > > reasonable fallback logic. > > > > The main downside to this is for code which uses these syscalls but does > > not check the return value, blindly assuming they will always > > succeeed. Returning an errno could result in sub-optimal behaviour. > > Arguably though such code is already broken & needs fixing regardless. > > > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > > --- > > qemu-seccomp.c | 32 +++++++++++++++++++++++++------- > > 1 file changed, 25 insertions(+), 7 deletions(-) > > > > diff --git a/qemu-seccomp.c b/qemu-seccomp.c > > index 36d5829831..9776c9ef40 100644 > > --- a/qemu-seccomp.c > > +++ b/qemu-seccomp.c > > @@ -121,20 +121,37 @@ qemu_seccomp(unsigned int operation, unsigned int flags, void *args) > > #endif > > } > > > > -static uint32_t qemu_seccomp_get_kill_action(void) > > +static uint32_t qemu_seccomp_get_kill_action(int set) > > Minor nit, let's rename qemu_seccomp_get_kill_action() -> > qemu_seccomp_get_action() I think that would be better too. And thanks for the contribution, Daniel. I can fix this when I send the pull request. Acked-by: Eduardo Otubo <otubo@redhat.com> > > > { > > + switch (set) { > > + case QEMU_SECCOMP_SET_DEFAULT: > > + case QEMU_SECCOMP_SET_OBSOLETE: > > + case QEMU_SECCOMP_SET_PRIVILEGED: > > + case QEMU_SECCOMP_SET_SPAWN: { > > #if defined(SECCOMP_GET_ACTION_AVAIL) && defined(SCMP_ACT_KILL_PROCESS) && \ > > defined(SECCOMP_RET_KILL_PROCESS) > > - { > > - uint32_t action = SECCOMP_RET_KILL_PROCESS; > > + static int kill_process = -1; > > + if (kill_process == -1) { > > + uint32_t action = SECCOMP_RET_KILL_PROCESS; > > > > - if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > > + if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { > > + kill_process = 1; > > + } > > + kill_process = 0; > > + } > > + if (kill_process == 1) { > > return SCMP_ACT_KILL_PROCESS; > > } > > - } > > #endif > > + return SCMP_ACT_TRAP; > > + } > > + > > + case QEMU_SECCOMP_SET_RESOURCECTL: > > + return SCMP_ACT_ERRNO(EPERM); > > > > - return SCMP_ACT_TRAP; > > + default: > > + g_assert_not_reached(); > > + } > > } > > > > > > @@ -143,7 +160,6 @@ static int seccomp_start(uint32_t seccomp_opts) > > int rc = 0; > > unsigned int i = 0; > > scmp_filter_ctx ctx; > > - uint32_t action = qemu_seccomp_get_kill_action(); > > > > ctx = seccomp_init(SCMP_ACT_ALLOW); > > if (ctx == NULL) { > > @@ -157,10 +173,12 @@ static int seccomp_start(uint32_t seccomp_opts) > > } > > > > for (i = 0; i < ARRAY_SIZE(blacklist); i++) { > > + uint32_t action; > > if (!(seccomp_opts & blacklist[i].set)) { > > continue; > > } > > > > + action = qemu_seccomp_get_kill_action(blacklist[i].set); > > rc = seccomp_rule_add_array(ctx, action, blacklist[i].num, > > blacklist[i].narg, blacklist[i].arg_cmp); > > if (rc < 0) { > > -- > > 2.20.1 > > > > > -- > Marc-André Lureau
diff --git a/qemu-seccomp.c b/qemu-seccomp.c index 36d5829831..9776c9ef40 100644 --- a/qemu-seccomp.c +++ b/qemu-seccomp.c @@ -121,20 +121,37 @@ qemu_seccomp(unsigned int operation, unsigned int flags, void *args) #endif } -static uint32_t qemu_seccomp_get_kill_action(void) +static uint32_t qemu_seccomp_get_kill_action(int set) { + switch (set) { + case QEMU_SECCOMP_SET_DEFAULT: + case QEMU_SECCOMP_SET_OBSOLETE: + case QEMU_SECCOMP_SET_PRIVILEGED: + case QEMU_SECCOMP_SET_SPAWN: { #if defined(SECCOMP_GET_ACTION_AVAIL) && defined(SCMP_ACT_KILL_PROCESS) && \ defined(SECCOMP_RET_KILL_PROCESS) - { - uint32_t action = SECCOMP_RET_KILL_PROCESS; + static int kill_process = -1; + if (kill_process == -1) { + uint32_t action = SECCOMP_RET_KILL_PROCESS; - if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { + if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) { + kill_process = 1; + } + kill_process = 0; + } + if (kill_process == 1) { return SCMP_ACT_KILL_PROCESS; } - } #endif + return SCMP_ACT_TRAP; + } + + case QEMU_SECCOMP_SET_RESOURCECTL: + return SCMP_ACT_ERRNO(EPERM); - return SCMP_ACT_TRAP; + default: + g_assert_not_reached(); + } } @@ -143,7 +160,6 @@ static int seccomp_start(uint32_t seccomp_opts) int rc = 0; unsigned int i = 0; scmp_filter_ctx ctx; - uint32_t action = qemu_seccomp_get_kill_action(); ctx = seccomp_init(SCMP_ACT_ALLOW); if (ctx == NULL) { @@ -157,10 +173,12 @@ static int seccomp_start(uint32_t seccomp_opts) } for (i = 0; i < ARRAY_SIZE(blacklist); i++) { + uint32_t action; if (!(seccomp_opts & blacklist[i].set)) { continue; } + action = qemu_seccomp_get_kill_action(blacklist[i].set); rc = seccomp_rule_add_array(ctx, action, blacklist[i].num, blacklist[i].narg, blacklist[i].arg_cmp); if (rc < 0) {
The Mesa library tries to set process affinity on some of its threads in order to optimize its performance. Currently this results in QEMU being immediately terminated when seccomp is enabled. Mesa doesn't consider failure of the process affinity settings to be fatal to its operation, but our seccomp policy gives it no choice in gracefully handling this denial. It is reasonable to consider that malicious code using the resource control syscalls to be a less serious attack than if they were trying to spawn processes or change UIDs and other such things. Generally speaking changing the resource control setting will "merely" affect quality of service of processes on the host. With this in mind, rather than kill the process, we can relax the policy for these syscalls to return the EPERM errno value. This allows callers to detect that QEMU does not want them to change resource allocations, and apply some reasonable fallback logic. The main downside to this is for code which uses these syscalls but does not check the return value, blindly assuming they will always succeeed. Returning an errno could result in sub-optimal behaviour. Arguably though such code is already broken & needs fixing regardless. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> --- qemu-seccomp.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)