diff mbox series

[v2,1/7] dt-bindings: usb: hd3ss3220 device tree binding document

Message ID 1552552775-51667-2-git-send-email-biju.das@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series Add USB3.0 and TI HD3SS3220 driver support | expand

Commit Message

Biju Das March 14, 2019, 8:39 a.m. UTC
Add device tree binding document for TI HD3SS3220 Type-C DRP port
controller driver.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
V1-->V2
  * Added connector node.
  * updated the example with connector node.
---
 .../devicetree/bindings/usb/ti,hd3ss3220.txt       | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt

Comments

Rob Herring March 28, 2019, 3:35 p.m. UTC | #1
On Thu, Mar 14, 2019 at 08:39:29AM +0000, Biju Das wrote:
> Add device tree binding document for TI HD3SS3220 Type-C DRP port
> controller driver.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> ---
> V1-->V2
>   * Added connector node.
>   * updated the example with connector node.
> ---
>  .../devicetree/bindings/usb/ti,hd3ss3220.txt       | 37 ++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt

Reviewed-by: Rob Herring <robh@kernel.org>

> diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
> new file mode 100644
> index 0000000..7f41400
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
> @@ -0,0 +1,37 @@
> +TI HD3SS3220 TypeC DRP Port Controller.
> +
> +Required properties:
> + - compatible: Must be "ti,hd3ss3220".
> + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
> + - interrupts: <a b> where a is the interrupt number and b represents an
> +   encoding of the sense and level information for the interrupt.
> +
> +Required sub-node:
> + - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The
> +   bindings of the connector node are specified in:
> +
> +	Documentation/devicetree/bindings/connector/usb-connector.txt
> +
> +Example:
> +hd3ss3220@47 {
> +	compatible = "ti,hd3ss3220";
> +	reg = <0x47>;
> +	interrupt-parent = <&gpio6>;
> +	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> +	usb_con: connector {
> +		compatible = "usb-c-connector";
> +		label = "USB-C";

Arguably, not that useful of a label as it doesn't describe which USB C 
connector.

> +		data-role = "dual";
> +	};
> +
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		hd3ss3220_ep: endpoint@0 {
> +			reg = <0>;
> +			remote-endpoint = <&usb3peri_role_switch>;
> +		};
> +	};
> +};
> -- 
> 2.7.4
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..7f41400
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,37 @@ 
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: <a b> where a is the interrupt number and b represents an
+   encoding of the sense and level information for the interrupt.
+
+Required sub-node:
+ - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The
+   bindings of the connector node are specified in:
+
+	Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+	compatible = "ti,hd3ss3220";
+	reg = <0x47>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+	};
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hd3ss3220_ep: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usb3peri_role_switch>;
+		};
+	};
+};