diff mbox series

mfd: twl-core: disable irq while suspended

Message ID 20190223114754.16286-1-andreas@kemnade.info (mailing list archive)
State New, archived
Headers show
Series mfd: twl-core: disable irq while suspended | expand

Commit Message

Andreas Kemnade Feb. 23, 2019, 11:47 a.m. UTC
Since commit
6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
in i2c-omap.c returns -EACCES.
[   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
[   86.555572] Disabling non-boot CPUs ...
[   86.555664] Successfully put all powerdomains to target state
[   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563751] twl4030: I2C error -13 reading PIH ISR
[   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563812] twl4030: I2C error -13 reading PIH ISR
[   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563903] twl4030: I2C error -13 reading PIH ISR

This happens when we wakeup via something behing twl4030
(powerbutton or rtc alarm).
This goes on for minutes until the system is finally resumed.
Disable the irq on suspend and enable it on resume to avoid
having i2c access problems when the irq registers are checked.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 drivers/mfd/twl-core.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Tony Lindgren Feb. 23, 2019, 6:23 p.m. UTC | #1
* Andreas Kemnade <andreas@kemnade.info> [190223 11:48]:
> Since commit
> 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
> on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
> in i2c-omap.c returns -EACCES.
> [   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
> [   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
> [   86.555572] Disabling non-boot CPUs ...
> [   86.555664] Successfully put all powerdomains to target state
> [   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563751] twl4030: I2C error -13 reading PIH ISR
> [   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563812] twl4030: I2C error -13 reading PIH ISR
> [   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563903] twl4030: I2C error -13 reading PIH ISR
> 
> This happens when we wakeup via something behing twl4030
> (powerbutton or rtc alarm).
> This goes on for minutes until the system is finally resumed.
> Disable the irq on suspend and enable it on resume to avoid
> having i2c access problems when the irq registers are checked.

Thanks for fixing this, still works fine for me for rtcwake:

Tested-by: Tony Lindgren <tony@atomide.com>
Andreas Kemnade March 1, 2019, 6:45 a.m. UTC | #2
Hi,

On Sat, 23 Feb 2019 10:23:23 -0800
Tony Lindgren <tony@atomide.com> wrote:

> * Andreas Kemnade <andreas@kemnade.info> [190223 11:48]:
> > Since commit
> > 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
> > on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
> > in i2c-omap.c returns -EACCES.
> > [   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
> > [   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
> > [   86.555572] Disabling non-boot CPUs ...
> > [   86.555664] Successfully put all powerdomains to target state
> > [   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
> > [   86.563751] twl4030: I2C error -13 reading PIH ISR
> > [   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
> > [   86.563812] twl4030: I2C error -13 reading PIH ISR
> > [   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
> > [   86.563903] twl4030: I2C error -13 reading PIH ISR
> > 
> > This happens when we wakeup via something behing twl4030
> > (powerbutton or rtc alarm).
> > This goes on for minutes until the system is finally resumed.
> > Disable the irq on suspend and enable it on resume to avoid
> > having i2c access problems when the irq registers are checked.  
> 
> Thanks for fixing this, still works fine for me for rtcwake:
> 
> Tested-by: Tony Lindgren <tony@atomide.com>
> 
hmm, in which version we will see this regression fixed?

I consider this whole thing as a reminder to finally
improve my automated test facilities and finally add the suspend/power
consumption test scripts I have to it so I can catch such things earlier.

Regards,
Andreas
Lee Jones April 2, 2019, 3:52 a.m. UTC | #3
On Sat, 23 Feb 2019, Andreas Kemnade wrote:

> Since commit
> 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
> on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
> in i2c-omap.c returns -EACCES.
> [   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
> [   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
> [   86.555572] Disabling non-boot CPUs ...
> [   86.555664] Successfully put all powerdomains to target state
> [   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563751] twl4030: I2C error -13 reading PIH ISR
> [   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563812] twl4030: I2C error -13 reading PIH ISR
> [   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563903] twl4030: I2C error -13 reading PIH ISR
> 
> This happens when we wakeup via something behing twl4030
> (powerbutton or rtc alarm).
> This goes on for minutes until the system is finally resumed.
> Disable the irq on suspend and enable it on resume to avoid
> having i2c access problems when the irq registers are checked.
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
>  drivers/mfd/twl-core.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 299016bc46d9..104477b512a2 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1245,6 +1245,28 @@  twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return status;
 }
 
+static int __maybe_unused twl_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq)
+		disable_irq(client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused twl_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq)
+		enable_irq(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume);
+
 static const struct i2c_device_id twl_ids[] = {
 	{ "twl4030", TWL4030_VAUX2 },	/* "Triton 2" */
 	{ "twl5030", 0 },		/* T2 updated */
@@ -1262,6 +1284,7 @@  static const struct i2c_device_id twl_ids[] = {
 /* One Client Driver , 4 Clients */
 static struct i2c_driver twl_driver = {
 	.driver.name	= DRIVER_NAME,
+	.driver.pm	= &twl_dev_pm_ops,
 	.id_table	= twl_ids,
 	.probe		= twl_probe,
 	.remove		= twl_remove,