diff mbox series

[v2,1/3] media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible

Message ID 20190401081959.16474-2-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show
Series media: platform: Add support for the Amlogic Meson G12A AO CEC Controller | expand

Commit Message

Neil Armstrong April 1, 2019, 8:19 a.m. UTC
The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and
the other one is AO-CEC-A described by the current bindings.

The register interface is very close but the internal architecture
is totally different.

The other difference is the clock source, the AO-CEC-B takes the
"oscin", the Always-On Oscillator clock, as input and embeds a
dual-divider clock divider to provide the precise 32768Hz base
clock for CEC communication.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/media/meson-ao-cec.txt      | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

Comments

Rob Herring (Arm) April 6, 2019, 6:06 a.m. UTC | #1
On Mon,  1 Apr 2019 10:19:57 +0200, Neil Armstrong wrote:
> The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and
> the other one is AO-CEC-A described by the current bindings.
> 
> The register interface is very close but the internal architecture
> is totally different.
> 
> The other difference is the clock source, the AO-CEC-B takes the
> "oscin", the Always-On Oscillator clock, as input and embeds a
> dual-divider clock divider to provide the precise 32768Hz base
> clock for CEC communication.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/media/meson-ao-cec.txt      | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
index 8671bdb08080..c67fc41d4aa2 100644
--- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt
+++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
@@ -4,16 +4,23 @@  The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
 to handle communication between HDMI connected devices over the CEC bus.
 
 Required properties:
-  - compatible : value should be following
+  - compatible : value should be following depending on the SoC :
+	For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
 	"amlogic,meson-gx-ao-cec"
+	For G12A (AO_CEC_B module) :
+	"amlogic,meson-g12a-ao-cec"
 
   - reg : Physical base address of the IP registers and length of memory
 	  mapped region.
 
   - interrupts : AO-CEC interrupt number to the CPU.
   - clocks : from common clock binding: handle to AO-CEC clock.
-  - clock-names : from common clock binding: must contain "core",
-		  corresponding to entry in the clocks property.
+  - clock-names : from common clock binding, must contain :
+		For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
+		- "core"
+		For G12A (AO_CEC_B module) :
+		- "oscin"
+		corresponding to entry in the clocks property.
   - hdmi-phandle: phandle to the HDMI controller
 
 Example: