Message ID | 20190413082748.29990-10-andrew.smirnov@gmail.com (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Eduardo Valentin |
Headers | show |
Series | QorIQ TMU multi-sensor and HWMON support | expand |
On 13/04/2019 10:27, Andrey Smirnov wrote: > Tmu_get_temp will get called as a part of sensor registration via > devm_thermal_zone_of_sensor_register(). To prevent it from retruning > bogus data we need to enable sensor monitoring before that. Looking at > the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in > enabling them all, so, for the sake of simplicity, change the code to > do just that. > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > Cc: Chris Healy <cphealy@gmail.com> > Cc: Lucas Stach <l.stach@pengutronix.de> > Cc: Eduardo Valentin <edubezval@gmail.com> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Angus Ainslie (Purism) <angus@akkea.ca> > Cc: linux-imx@nxp.com > Cc: linux-pm@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > --- > drivers/thermal/qoriq_thermal.c | 27 ++++++++++++++------------- > 1 file changed, 14 insertions(+), 13 deletions(-) > > diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c > index 9774323a17bf..abbbfe88422e 100644 > --- a/drivers/thermal/qoriq_thermal.c > +++ b/drivers/thermal/qoriq_thermal.c > @@ -23,6 +23,7 @@ > #define TMR_DISABLE 0x0 > #define TMR_ME 0x80000000 > #define TMR_ALPF 0x0c000000 > +#define TMR_MSITE_ALL GENMASK(15, 0) > > #define REGS_TMTMIR 0x008 /* Temperature measurement interval Register */ > #define TMTMIR_DEFAULT 0x0000000f > @@ -61,28 +62,28 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = { > static int qoriq_tmu_register_tmu_zone(struct device *dev, > struct qoriq_tmu_data *qdata) > { > - int id, sites = 0; > + int id, ret; > + > + regmap_write(qdata->regmap, REGS_TMR, > + TMR_MSITE_ALL | TMR_ME | TMR_ALPF); > > for (id = 0; id < SITES_MAX; id++) { > struct thermal_zone_device *tzd; > > tzd = devm_thermal_zone_of_sensor_register(dev, id, > qdata, &tmu_tz_ops); > - if (IS_ERR(tzd)) { > - if (PTR_ERR(tzd) == -ENODEV) > - continue; > - else > - return PTR_ERR(tzd); > + ret = PTR_ERR_OR_ZERO(tzd); > + switch (ret) { > + case -ENODEV: > + continue; > + case 0: Why not simply: if (!IS_ERR(tzd) || PTR_ERR(tzd) == -ENODEV) continue; regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE); return PTR_ERR(tzd); ? > + break; > + default: > + regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE); > + return ret; > } > - > - sites |= 0x1 << (15 - id); > } > > - /* Enable monitoring */ > - if (sites != 0) > - regmap_write(qdata->regmap, REGS_TMR, > - sites | TMR_ME | TMR_ALPF); > - > return 0; > } > >
On Tue, Apr 16, 2019 at 10:09 AM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > On 13/04/2019 10:27, Andrey Smirnov wrote: > > Tmu_get_temp will get called as a part of sensor registration via > > devm_thermal_zone_of_sensor_register(). To prevent it from retruning > > bogus data we need to enable sensor monitoring before that. Looking at > > the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in > > enabling them all, so, for the sake of simplicity, change the code to > > do just that. > > > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > > Cc: Chris Healy <cphealy@gmail.com> > > Cc: Lucas Stach <l.stach@pengutronix.de> > > Cc: Eduardo Valentin <edubezval@gmail.com> > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > > Cc: Angus Ainslie (Purism) <angus@akkea.ca> > > Cc: linux-imx@nxp.com > > Cc: linux-pm@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > --- > > drivers/thermal/qoriq_thermal.c | 27 ++++++++++++++------------- > > 1 file changed, 14 insertions(+), 13 deletions(-) > > > > diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c > > index 9774323a17bf..abbbfe88422e 100644 > > --- a/drivers/thermal/qoriq_thermal.c > > +++ b/drivers/thermal/qoriq_thermal.c > > @@ -23,6 +23,7 @@ > > #define TMR_DISABLE 0x0 > > #define TMR_ME 0x80000000 > > #define TMR_ALPF 0x0c000000 > > +#define TMR_MSITE_ALL GENMASK(15, 0) > > > > #define REGS_TMTMIR 0x008 /* Temperature measurement interval Register */ > > #define TMTMIR_DEFAULT 0x0000000f > > @@ -61,28 +62,28 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = { > > static int qoriq_tmu_register_tmu_zone(struct device *dev, > > struct qoriq_tmu_data *qdata) > > { > > - int id, sites = 0; > > + int id, ret; > > + > > + regmap_write(qdata->regmap, REGS_TMR, > > + TMR_MSITE_ALL | TMR_ME | TMR_ALPF); > > > > for (id = 0; id < SITES_MAX; id++) { > > struct thermal_zone_device *tzd; > > > > tzd = devm_thermal_zone_of_sensor_register(dev, id, > > qdata, &tmu_tz_ops); > > - if (IS_ERR(tzd)) { > > - if (PTR_ERR(tzd) == -ENODEV) > > - continue; > > - else > > - return PTR_ERR(tzd); > > + ret = PTR_ERR_OR_ZERO(tzd); > > + switch (ret) { > > + case -ENODEV: > > + continue; > > + case 0: > > Why not simply: > > if (!IS_ERR(tzd) || PTR_ERR(tzd) == -ENODEV) > continue; > > regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE); > > return PTR_ERR(tzd); > > ? Seemed like less typing and smaller diff for following patch that adds hwmon sensor registration. I can probable make "if" work kind of the same, so I'll change that. I do dislike that you had to use *_ERR macro three times though, so I'll stick with PTR_ERR_OR_ZERO. Thanks, Andrey Smirnov
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c index 9774323a17bf..abbbfe88422e 100644 --- a/drivers/thermal/qoriq_thermal.c +++ b/drivers/thermal/qoriq_thermal.c @@ -23,6 +23,7 @@ #define TMR_DISABLE 0x0 #define TMR_ME 0x80000000 #define TMR_ALPF 0x0c000000 +#define TMR_MSITE_ALL GENMASK(15, 0) #define REGS_TMTMIR 0x008 /* Temperature measurement interval Register */ #define TMTMIR_DEFAULT 0x0000000f @@ -61,28 +62,28 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = { static int qoriq_tmu_register_tmu_zone(struct device *dev, struct qoriq_tmu_data *qdata) { - int id, sites = 0; + int id, ret; + + regmap_write(qdata->regmap, REGS_TMR, + TMR_MSITE_ALL | TMR_ME | TMR_ALPF); for (id = 0; id < SITES_MAX; id++) { struct thermal_zone_device *tzd; tzd = devm_thermal_zone_of_sensor_register(dev, id, qdata, &tmu_tz_ops); - if (IS_ERR(tzd)) { - if (PTR_ERR(tzd) == -ENODEV) - continue; - else - return PTR_ERR(tzd); + ret = PTR_ERR_OR_ZERO(tzd); + switch (ret) { + case -ENODEV: + continue; + case 0: + break; + default: + regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE); + return ret; } - - sites |= 0x1 << (15 - id); } - /* Enable monitoring */ - if (sites != 0) - regmap_write(qdata->regmap, REGS_TMR, - sites | TMR_ME | TMR_ALPF); - return 0; }
Tmu_get_temp will get called as a part of sensor registration via devm_thermal_zone_of_sensor_register(). To prevent it from retruning bogus data we need to enable sensor monitoring before that. Looking at the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in enabling them all, so, for the sake of simplicity, change the code to do just that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- drivers/thermal/qoriq_thermal.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)