diff mbox series

[v2,1/2] arm64: dts: imx8mm: Add SAI nodes

Message ID 20190422193542.2853-2-daniel.baluta@nxp.com (mailing list archive)
State New, archived
Headers show
Series Enable wm8524 codec on i.MX8MM EVK | expand

Commit Message

Daniel Baluta April 22, 2019, 7:35 p.m. UTC
i.MX8MM has 5 SAI instances with the following base
addresses according to RM.

SAI1 base address: 3001_0000h
SAI2 base address: 3002_0000h
SAI3 base address: 3003_0000h
SAI5 base address: 3005_0000h
SAI6 base address: 3006_0000h

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 71 +++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Comments

Marco Felsch April 23, 2019, 5:20 a.m. UTC | #1
Hi Daniel,

On 19-04-22 19:35, Daniel Baluta wrote:
> i.MX8MM has 5 SAI instances with the following base
> addresses according to RM.
> 
> SAI1 base address: 3001_0000h
> SAI2 base address: 3002_0000h
> SAI3 base address: 3003_0000h
> SAI5 base address: 3005_0000h
> SAI6 base address: 3006_0000h
> 
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 71 +++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index de3498c2dd44..4d080dc47216 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -171,6 +171,77 @@
>  			#size-cells = <1>;
>  			ranges;
>  
> +			sai1: sai@30010000 {
> +				compatible = "fsl,imx8mm-sai",
> +						"fsl,imx8mq-sai";

Just a nitpick but I would not break this line here. This applies to the
other sai nodes too.

Regards,
  Marco

> +				reg = <0x30010000 0x10000>;
> +				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
> +					 <&clk IMX8MM_CLK_SAI1_ROOT>,
> +					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
> +				clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +				dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
> +				dma-names = "rx", "tx";
> +				status = "disabled";
> +			};
> +
> +			sai2: sai@30020000 {
> +				compatible = "fsl,imx8mm-sai",
> +						"fsl,imx8mq-sai";
> +				reg = <0x30020000 0x10000>;
> +				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
> +					<&clk IMX8MM_CLK_SAI2_ROOT>,
> +					<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
> +				clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +				dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
> +				dma-names = "rx", "tx";
> +				status = "disabled";
> +			};
> +
> +			sai3: sai@30030000 {
> +				#sound-dai-cells = <0>;
> +				compatible = "fsl,imx8mm-sai",
> +						"fsl,imx8mq-sai";
> +				reg = <0x30030000 0x10000>;
> +				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
> +					 <&clk IMX8MM_CLK_SAI3_ROOT>,
> +					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
> +				clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +				dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
> +				dma-names = "rx", "tx";
> +				status = "disabled";
> +			};
> +
> +			sai5: sai@30050000 {
> +				compatible = "fsl,imx8mm-sai",
> +						"fsl,imx8mq-sai";
> +				reg = <0x30050000 0x10000>;
> +				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
> +					 <&clk IMX8MM_CLK_SAI5_ROOT>,
> +					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
> +				clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +				dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
> +				dma-names = "rx", "tx";
> +				status = "disabled";
> +			};
> +
> +			sai6: sai@30060000 {
> +				compatible = "fsl,imx8mm-sai",
> +						"fsl,imx8mq-sai";
> +				reg = <0x30060000 0x10000>;
> +				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
> +					 <&clk IMX8MM_CLK_SAI6_ROOT>,
> +					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
> +				clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +				dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
> +				dma-names = "rx", "tx";
> +				status = "disabled";
> +			};
> +
>  			gpio1: gpio@30200000 {
>  				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
>  				reg = <0x30200000 0x10000>;
> -- 
> 2.17.1
>
Daniel Baluta April 23, 2019, 6:16 a.m. UTC | #2
On Tue, Apr 23, 2019 at 8:21 AM Marco Felsch <m.felsch@pengutronix.de> wrote:
>
> Hi Daniel,
>
> On 19-04-22 19:35, Daniel Baluta wrote:
> > i.MX8MM has 5 SAI instances with the following base
> > addresses according to RM.
> >
> > SAI1 base address: 3001_0000h
> > SAI2 base address: 3002_0000h
> > SAI3 base address: 3003_0000h
> > SAI5 base address: 3005_0000h
> > SAI6 base address: 3006_0000h
> >
> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 71 +++++++++++++++++++++++
> >  1 file changed, 71 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index de3498c2dd44..4d080dc47216 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -171,6 +171,77 @@
> >                       #size-cells = <1>;
> >                       ranges;
> >
> > +                     sai1: sai@30010000 {
> > +                             compatible = "fsl,imx8mm-sai",
> > +                                             "fsl,imx8mq-sai";
>
> Just a nitpick but I would not break this line here. This applies to the
> other sai nodes too.

Yes, I thought about this and I think I will fix it as you say also I get past
the 80 chars limit.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index de3498c2dd44..4d080dc47216 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -171,6 +171,77 @@ 
 			#size-cells = <1>;
 			ranges;
 
+			sai1: sai@30010000 {
+				compatible = "fsl,imx8mm-sai",
+						"fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+					 <&clk IMX8MM_CLK_SAI1_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai2: sai@30020000 {
+				compatible = "fsl,imx8mm-sai",
+						"fsl,imx8mq-sai";
+				reg = <0x30020000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+					<&clk IMX8MM_CLK_SAI2_ROOT>,
+					<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai",
+						"fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+					 <&clk IMX8MM_CLK_SAI3_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30050000 {
+				compatible = "fsl,imx8mm-sai",
+						"fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+					 <&clk IMX8MM_CLK_SAI5_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30060000 {
+				compatible = "fsl,imx8mm-sai",
+						"fsl,imx8mq-sai";
+				reg = <0x30060000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+					 <&clk IMX8MM_CLK_SAI6_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;