diff mbox series

[11/12] mkfs: validate start and end of aligned logs

Message ID 155839427473.68606.3900005341580158051.stgit@magnolia (mailing list archive)
State Superseded
Headers show
Series xfsprogs-5.1: fix various problems | expand

Commit Message

Darrick J. Wong May 20, 2019, 11:17 p.m. UTC 
From: Darrick J. Wong <darrick.wong@oracle.com>

Validate that the start and end of the log stay within a single AG if
we adjust either end to align to stripe units.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 mkfs/xfs_mkfs.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

Comments

Eric Sandeen May 21, 2019, 7:24 p.m. UTC | #1 
On 5/20/19 6:17 PM, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> Validate that the start and end of the log stay within a single AG if
> we adjust either end to align to stripe units.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---
>  mkfs/xfs_mkfs.c |   15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> 
> diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
> index 5b66074d..8f84536e 100644
> --- a/mkfs/xfs_mkfs.c
> +++ b/mkfs/xfs_mkfs.c
> @@ -3044,15 +3044,28 @@ align_internal_log(
>  	struct xfs_mount	*mp,
>  	int			sunit)
>  {
> +	uint64_t		logend;
> +
>  	/* round up log start if necessary */
>  	if ((cfg->logstart % sunit) != 0)
>  		cfg->logstart = ((cfg->logstart + (sunit - 1)) / sunit) * sunit;
>  
> +	/* if our log start rounds into the next AG we're done */

/* If our log start overlaps the next AG's metadata, fail */

> +	if (!xfs_verify_fsbno(mp, cfg->logstart)) {
> +			fprintf(stderr,
> +_("Due to stripe alignment, the internal log start (%lld) cannot be aligned\n"
> +  "within an allocation group.\n"),
> +			(long long) cfg->logstart);

Hm, should it suggest what should be modified to try again ...?

> +		usage();
> +	}
> +
>  	/* round up/down the log size now */
>  	align_log_size(cfg, sunit);
>  
>  	/* check the aligned log still fits in an AG. */
> -	if (cfg->logblocks > cfg->agsize - XFS_FSB_TO_AGBNO(mp, cfg->logstart)) {
> +	logend = cfg->logstart + cfg->logblocks - 1;
> +	if (XFS_FSB_TO_AGNO(mp, cfg->logstart) != XFS_FSB_TO_AGNO(mp, logend) ||
> +	    !xfs_verify_fsbno(mp, logend)) {

this xfs_verify_fsbno is probably redundant but can't hurt?

-Eric

>  		fprintf(stderr,
>  _("Due to stripe alignment, the internal log size (%lld) is too large.\n"
>    "Must fit within an allocation group.\n"),
>
Darrick J. Wong May 22, 2019, 4:42 p.m. UTC | #2 
On Tue, May 21, 2019 at 02:24:40PM -0500, Eric Sandeen wrote:
> On 5/20/19 6:17 PM, Darrick J. Wong wrote:
> > From: Darrick J. Wong <darrick.wong@oracle.com>
> > 
> > Validate that the start and end of the log stay within a single AG if
> > we adjust either end to align to stripe units.
> > 
> > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > ---
> >  mkfs/xfs_mkfs.c |   15 ++++++++++++++-
> >  1 file changed, 14 insertions(+), 1 deletion(-)
> > 
> > 
> > diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
> > index 5b66074d..8f84536e 100644
> > --- a/mkfs/xfs_mkfs.c
> > +++ b/mkfs/xfs_mkfs.c
> > @@ -3044,15 +3044,28 @@ align_internal_log(
> >  	struct xfs_mount	*mp,
> >  	int			sunit)
> >  {
> > +	uint64_t		logend;
> > +
> >  	/* round up log start if necessary */
> >  	if ((cfg->logstart % sunit) != 0)
> >  		cfg->logstart = ((cfg->logstart + (sunit - 1)) / sunit) * sunit;
> >  
> > +	/* if our log start rounds into the next AG we're done */
> 
> /* If our log start overlaps the next AG's metadata, fail */

Ok.

> > +	if (!xfs_verify_fsbno(mp, cfg->logstart)) {
> > +			fprintf(stderr,
> > +_("Due to stripe alignment, the internal log start (%lld) cannot be aligned\n"
> > +  "within an allocation group.\n"),
> > +			(long long) cfg->logstart);
> 
> Hm, should it suggest what should be modified to try again ...?

But what should be modified, exactly?  -d su=0,sw=0?

> > +		usage();
> > +	}
> > +
> >  	/* round up/down the log size now */
> >  	align_log_size(cfg, sunit);
> >  
> >  	/* check the aligned log still fits in an AG. */
> > -	if (cfg->logblocks > cfg->agsize - XFS_FSB_TO_AGBNO(mp, cfg->logstart)) {
> > +	logend = cfg->logstart + cfg->logblocks - 1;
> > +	if (XFS_FSB_TO_AGNO(mp, cfg->logstart) != XFS_FSB_TO_AGNO(mp, logend) ||
> > +	    !xfs_verify_fsbno(mp, logend)) {
> 
> this xfs_verify_fsbno is probably redundant but can't hurt?

<nod>

Will respin patch.

--D

> -Eric
> 
> >  		fprintf(stderr,
> >  _("Due to stripe alignment, the internal log size (%lld) is too large.\n"
> >    "Must fit within an allocation group.\n"),
> >
diff mbox series

Patch

diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 5b66074d..8f84536e 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -3044,15 +3044,28 @@  align_internal_log(
 	struct xfs_mount	*mp,
 	int			sunit)
 {
+	uint64_t		logend;
+
 	/* round up log start if necessary */
 	if ((cfg->logstart % sunit) != 0)
 		cfg->logstart = ((cfg->logstart + (sunit - 1)) / sunit) * sunit;
 
+	/* if our log start rounds into the next AG we're done */
+	if (!xfs_verify_fsbno(mp, cfg->logstart)) {
+			fprintf(stderr,
+_("Due to stripe alignment, the internal log start (%lld) cannot be aligned\n"
+  "within an allocation group.\n"),
+			(long long) cfg->logstart);
+		usage();
+	}
+
 	/* round up/down the log size now */
 	align_log_size(cfg, sunit);
 
 	/* check the aligned log still fits in an AG. */
-	if (cfg->logblocks > cfg->agsize - XFS_FSB_TO_AGBNO(mp, cfg->logstart)) {
+	logend = cfg->logstart + cfg->logblocks - 1;
+	if (XFS_FSB_TO_AGNO(mp, cfg->logstart) != XFS_FSB_TO_AGNO(mp, logend) ||
+	    !xfs_verify_fsbno(mp, logend)) {
 		fprintf(stderr,
 _("Due to stripe alignment, the internal log size (%lld) is too large.\n"
   "Must fit within an allocation group.\n"),